Error Occured in exporting to Quicktime with Conversion

hello... I am gettin a general error on final cut pro and im needing just a little help... When i export to Quicktime with Conversion on the streaming medium setting... i get an Error Occured Message...
This error has never occured before on any of my other video's but with this one... i did add some music to the background and it is a bit longer video... almost 10 mins... What do you think i need to do to export this to quicktime with conversion on the streaming medium setting?
Thanks again,
Charlie Jabaley
SpitYoGame.com

First, try exporting as a selfcontained quicktime with sequence settings and try using compressor for the conversion.
It's unlikely the audio being longer than the video is causing the problem, but try adding a big of slug to the end of the video track so the material on the video track extends to at least the end of the audio.

Similar Messages

The movie could not be exported because an error occurred. (File already open with with write permis

The movie could not be exported because an error occurred. (File already open with with write permis
Never received this error until I updated to newer operating system.

This sounds vaguely like the Error -49 some people have been getting. It's related to a feature in Time Machine geared towards laptop users who aren't always connected to their Time Machine backup drive.
This requires using the Terminal app, in your Applications/Utilities folder
To turn off Time Machine snapshots type in the following command:
sudo tmutil disablelocal
The Mac will likely ask for your password, so type it in and hit the return key. The type the word, exit and hit return. Quit Terminal.
Open iMovie and try doing another export and see if the same error message pops up.

I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on

I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

Why am I getting the message "project could not be prepared because an error occurred. (File already open with write permission)" when trying to share my imovie to media browser?

Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to
share to the media browser? I have done this many times before and never got this message. This is very frustrating. Can anyone help me?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

An error occured while exporting the slideshow

Exporting a 400 slide slideshow. After it churns for awhile and the progress bar is all done, I get an error box that says:
AN error occurred while exporting the slideshow.
The export fiel could not be saved.
My only option is to click okay. No more detailed information available.
1) One of my hard drives has 15 gig free and the other has 90 gig free
2) I have a Users Movies directory ...nothing is in it.
ANy suggestions?

Are you exporting by clicking the iDVD button in iPhoto? If so, try Share/Export to Full Quality Quicktime. It produces a video file that you can drag onto iDVD's menu area or import into iDVD. I've found it's a more stable way than making the jump directly from iPhoto to iDVD.
John

An unexpected error occurred during export. [JSX]

Whenever I try to convert a Flash file into HTML5 I am continuously getting an error as "An unexpected error occurred during export. [JSX]".
I am unable to understand where the error has occured. Please help me out with this.

Hi NIranjan,
Can you try the solution in this post? Unexpected error on export / CreateJS / Discussion Area - CreateJS Support
Thanks,
Preran

After I make a trailer or movie on my Iphone 4S and try to save it to the camera roll, I get a message that "an error occurred during export". The message appears after the piece has seeminly finished exporting. What am I doing wrong???

After I make a trailer or movie on my Iphone 4S using IMovie and try to save it to the camera roll, I get the message "An error occurred during export." The message appears after the piece has seemingly finished exporting. What am I doing wrong????

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

Fix nonstop LR 1.1 errors "an error occured while exporting" and "an unknown error occured"

I downloaded Lightroom v1.1 & imported images. At least lightroom 1.1 could import images without crashing due to "out of meoory errors".
Then attempted to develop various images. It did not take long to start having major Lightroom 1.1 errors.
"An error occured while exporting", and no image created.
Or constant "an unknown error occured" while trying to view and develop.
Once again these RAW files can be viewed, and converted by Canon Digital Photo Professional & Adobe Photoshop. So the problme is the same old major flaws in Lighroom that make it unusable.
OK, I accept one fact. Lightroom is alpha or beta-ware and not in any way ready to be sold for public use.
Adobe suckered me for $199 for Lightroom. If Adobe will refund my money I will buy future Adobe products. If not, I am finished with Adobe.

With your attitude, I'm not surprised...if you want help, porvide the basics needed for troubleshooting-you know, OS, system version, what kind of files, what kind of HSs, where the images are being stored...otherwise, kindly buzz off. This is a User to User forum so the only people seeing your attitude is other users and we get kinda tired having of useless posts cluttering the boards. And your's is nothing but useless.

A network error occurred while trying to communicate with the server.

Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

An error occurred querying a data source - with REST services

Hi,
I have a SharePoint 2013 form library library with an info-path form. I need to get the logged in user's 'Display Name' on my form load automatically.
I used REST service to fetch the current user details. In the preview mode of the form, its showing the right name. But when I publish this form to library I am getting the following error.
REST Service --> http://site url/_api/SP.UserProfiles.PeopleManager/GetMyProperties
Please help me to resolve this issue.
Thanks in advance for your time and reply :)

Hi,
According to your post, my understanding is that an error occurred querying a data source with REST services.
It is defiantly permission issue with GetUserProfileByName service
and could be many reasons of this problem. You first try with UDCX file and make sure that UPS is running.
Here are some similar threads for your reference:
http://social.technet.microsoft.com/Forums/en-US/b8c668ea-7511-4657-a1a8-08fb4a6bd53d/info-path-an-error-occurred-querying-a-data-source?forum=sharepointcustomizationprevious
http://social.technet.microsoft.com/Forums/en-US/46866ac2-da09-4340-a86a-af72cbb2c8d7/info-path-an-error-occurred-querying-a-data-source-?forum=sharepointcustomization
http://blogs.msdn.com/b/russmax/archive/2012/08/17/want-to-call-sharepoint-2010-web-services-within-browser-based-infopath-2010-forms.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.

An error occurred while trying to communicate with the web browser.

I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
Only the FF browser is open.
When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
[Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
Thank you!

Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 10.2
# Adobe PDF Plug-In For Firefox and Netscape 8.2.4
# Shockwave Flash 10.0 r22
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/

In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred.m file already open with write permission.

In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission.
How do I resolve this?

Hi
Most often it helps by - Turning Off the TimeMachine application - during work in iMovie.
Yours Bengt W

Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (File already open with with write permission)

When I click on finalize project or when I tried to share on Vimeo iMovie goes through this ten hour operation and the, somethime while I'm away from the computer, I get this error message. UNABLE TO PREPARE PROJECT FOR PUBLISHING. The project could not be prepared for publishing because an error occurred. (File already open with with write permission).
This has happened to me before and I can't nail down the particulars of when this happens. I will say I've never been able to Finalize A Project (not even sure what than means) but I have been able to publish short films to YouTube. This current film is a little over an hour and I picked the HD Format. Could the size have something to do with it?

See the discussion here:
https://discussions.apple.com/message/16784714#16784714

In Imovie 2011-Trying to image capture my project but it comes up after 10 hours- The project could not be prepared for publishing because an error occurred. File already open with write permission. Hopefully someone can help me.

In Imovie 2011- Trying to image capture my project but it come up after 10 hours of rendering- The project could no be prepared for publishing because an error occured. File already open with write permission. Please Help!

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

Error Occured in exporting to Quicktime with Conversion

Similar Messages

Maybe you are looking for