Error Occured in Extractor

Dear Friends,
Can anybody help me on this ,
One of the Process chain showing error...in the data loading.
in the process monitor error shows as "error occured in the source system and in the further analysis its showing error occured in the extractor.
What the step i have to do ......to repair the chain and maintain it active...for the remaining loading
Thanks in advance for your replies...
Regards,
Riyad

Hi,
Check the connection with source system first. If it is not correct then get that corrected.
Check the data source if it is fecthing data or not in RSA3 tcode.
Check if the dala flow is up and active for which you are doing load thorugh chain (should be mapped with data source with active infosource)
If this fine then check and reactivate the process chain in RSPC and check the start variant and execute.
I hope it will help.
Thanks,
S

Similar Messages

The error occurred in Extractor Caller 09 Error message

Hi All,
I am trying to load the data from CRM to BI. While extracting i am getting error. It is throwing error in PSA itself.
Please help on this issue.
Error Message in RSMO.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Check Load from InfoSource 0CRM_SERVICE_PROCESS_H , Packet Info Package for 0CRM_SRV_PROCESS_H
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Note: If you not wish to receive any mails, maintain transaction RSMONMAIL.

Hi,
Just click right button on your source system and choose Transfer Global Setting. It should help. Please let me know the result.
Refer the below link,
http://www.sapfans.com/forums/viewtopic.php?f=12&t=308407&p=932153
Regards,
Ravindra.

ERROR:Occured in data Selection in Extractor

Hi ,
When i am executing a Master data Attributes Infopackage from SRM system to BI, I am getting the following Error from RSMO Screen
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I have replicated the datasources from the source system and activated the Transfer rules, but still the error continues.
But when you check the error messages, it shows
1)You are not authorized to extract from DataSource 0BP_RELATIONS_ATTR in application component: 0CA_BP-IO .
2)Errors in source system.
Can you please throw some light on this issue.When i consult the Basis Consultant regarding authorization, he says he has given SAP ALL authorization which means i have all authorizations.But the error is still occurring.
Thanks,
Amar

Hello!
1) Go to TCODE SM59 and Check that the RFC Connection between Source System and BW System is working correctly. Check the User ID BIWREMOTE_ is Setup correctly here for RFC Communication.
2) Go to TCODE SU01D and verify that User ID BIW_REMOTE is unlocked and has ALL set in ROLES Tab.
3) Go to TCODE SM58 and check if there are any pending entries for User BIW_REMOTE.
4) Verify the IDOC sweeper Jobs (Inbound & Outbound) are running correctly to flush out the Queues.
My Gut feel is that Background Users in R/3 system do not have sufficient access set up correctly...Please post when the Issue is resolved.
Thanks
Vasu

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

Error occurred in the source system

Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
    The sequence for creating time series in LiveCache is:
    1. Characteristic value combinations are created which in turn create
        planning object in the system
    2. The combination of version, planning area, and planning object is
        initialized, creating time series in LiveCache. This combination is
        so to speak the LiveCache anchor.
    This error occurs if
    o   New characteristic value combinatons have been created for the
        master palnning object structure that is assigned to the planning
        area, but the time series objects were not created.
System response
     Processing cannot continue.
Procedure
     There are two methods of creating time series objects for individual
     characteristic value combinations:
         a) Re-initialize the version without deleting the time series
             objects beforehand.
         b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
     In general SAP recommend that when you generate new characteristic value
     combinations, you set the Create time series objects indicator. This
     prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
Tyson

Hi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang

Error occurred while loading Generic extraction using Function module

Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....

Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS    =
REQUNR     = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 10737418240                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM

An error occurred in the source system, DBIF_RSQL_SQL_ERROR

Dear All,
last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4.
the error i found
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
i already check in RSA3 , Once execute 0FI_AR_4 I Found a dump
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSID_CPUDT_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"BWFIR_READ_BSID_CPUDT_DATA"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/BKPF_BSID ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU10"
"BWFIR_READ_BSID_CPUDT_DATA"
please any one help on this issue
Advance in thanks
Regards
Priya

Hi,
Can you please try adding the datafile to the PSAPTEMP tablespace in the source system, and try to start the process chain again. If required you have to contact the Basis Administration. Also please find the system logs and dumps in the source system at the point of time.
Can you please let me know if it got fixed.
Thanks & Regards,
VR

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

An error occurred in the source system (DB Conect)

Hi,
It message appear while an ODS was loading data fully to a Cube.
Please, can anyone help me to solve this problem?
Thank you very much in advance.
Jorge
Mensaje de error del sistema fuente
Diagnóstico
An error occurred in the source system.
Actividades en el sistema
An error occurred in Extractor .
Check the error message.
Procedimiento
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.

HI,
go to RSA1->Source systems -> Right-click -> check. if the connection is OK then, u will find the message in the status bar saying that, source system connection ok.
otherwise select the source system>context menu>activate.
if its activated then replicate your data source if it is giving error while activating source system, then contact your BASIS Administrator to activate the Source system.
plz assign points
regards
vadlamudi

An error occured in the source system

My process chain has been doing FULL load for COPA data in a ODS. It failed today saying
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
When I click on indiv. Message tab I get "Job in source system terminated - Requests is set to red"
What should I do to resolve the problem.

For Source system R3 :
This particular problem "Job terminated in the source System" occurs when there are long running jobs in the backend.
In the monitor tab,
Environment --> Job Overview --> In the source system.
After logging into the source system, click execute
Check the status of the job i.e. active or failed.
Check the job log for the same.
If its " DBIF_SQL_..... " sort of error, then in this case, delete the request from the data target and reload again.
The load would be successful
Caller 09 error normally occurs when the source from which the datasource is picking up data may be in use on the R3 side.
Hope this helps!!!!!!!

Errors occurred during the extraction in RSA3 - Extractor Checker

Hello,
I'm trying to check the standard datasource - 0CRM_QUOTATION_I (CRM Quotation Item) in RSA3 (extractor checker) in the CRM system but it returns a pop-up 'Errors occurred during the extraction'.
Could someone please let me know where and how to check the error as it is not very obvious from the pop-up?
Many thanks.
Regards,
Sri.

HI Sri,
Sometimes the BWA5 Adaptor settings are not properly transported to QA from DEV ,
Try this ,
Create a transport request manually from DEV again for the below object in TCODE : SE03 ( Objects in Requests --> Include Objects in a Transport Request --> Under selection by type and name --> choose radio button --> Selected Objects and provide the below entries )
R3TR SMO4 0CRM_QUOTATION_I
( you will have to enter SM04 and datasource name only ,press enter it will pick up R3TR automatically ) and then transport to QA
This should resolve the issue
Regards,
Sathya

Errors occurred during the extraction datasource of CRM System in Check extractor

Dear All,
Please find the below error's while I am extracting data from the data source in CRM.
RM_QUOTA_ORDER_I: Table SMOXHEAD contains no BDOC name .
Errors occurred during the extraction in Check extractor.
Please let me know solution to resolve the issue.
Thanks
Regards,
Sai

Hi,
Where your getting this error?
during info pack load or checking at crm system RSA3?
if your running your info pack then please run data source at RSA3.
Seems like your source table may not have any bdocs.
Where your runing this loads? prod or dev?
Thanks

Error occured in source system - in the extractor

Hi Experts,
I started an INIT load from ODS1 to ODS2 and Infocube.
It is expected to contain 21 million records.
After loading 17 million records the loading stops with an error message "an error occured in the source system"
Caller 09 contains an error message.
Can you please explain the reasons for this error and how to fix it so that i do not face this eror in the next init load.
Regards,
Suraj S Nair

Due to the high volume of records, this error may error.
Reduce the package size and check the loading once again.
Hope this helps.

An error occurred in the source system when running infopackage

Hello,
I am using 0CO_PC_PCP_03 (Product Cost Planning: Itemizations Costing) and cube 0COPC_C10 (Exploded Itemization) in BI. RSA3 extractor checker shows that there is data if you put in a period.But as soon as I run the infopackage I get error    :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
And i did put in the period in the internal formatfor FROM and TO in the selection tab on the infopakand but I am still getting the same error.
And when i go into details it gives me " Error occurred in the data selection "
Please assist
Thanks

I followed what you & Tarun advised and it shows the job as finished.Also this is what the log read:
Date        Time      Message
04/03/2009 12:49:29 Job started
04/03/2009 12:49:29 Step 001 started (program SBIE0001, variant &0000000000160, user ID DEVERP100)
04/03/2009 12:49:29 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
04/03/2009 12:49:29 DATASOURCE = 0CO_PC_PCP_03
04/03/2009 12:49:29 RLOGSYS    = DEVBI100
04/03/2009 12:49:29 REQUNR     = REQU_4DCA7N474P53QS8FJQ0RAKOW5
04/03/2009 12:49:29 UPDMODE    = F
04/03/2009 12:49:29 LANGUAGES = *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 *          Current Values for Selected Profile Parameters               *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 * abap/heap_area_nondia......... 2000683008                              *
04/03/2009 12:49:29 * abap/heap_area_total.......... 2000683008                              *
04/03/2009 12:49:29 * abap/heaplimit................ 40894464                                *
04/03/2009 12:49:29 * zcsa/installed_languages...... 1NEFDIJLPS                              *
04/03/2009 12:49:29 * zcsa/system_language.......... E                                       *
04/03/2009 12:49:29 * ztta/max_memreq_MB............ 2047                                    *
04/03/2009 12:49:29 * ztta/roll_area................ 3000320                                 *
04/03/2009 12:49:29 * ztta/roll_extension........... 2000683008                              *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 Synchronized transmission of info IDoc 3 (1 parallel tasks)
04/03/2009 12:49:29 IDOC: Info IDoc 3, IDoc No. 6812, Duration 00:00:00
04/03/2009 12:49:29 IDoc: Start = 04/03/2009 12:49:29, End = 04/03/2009 12:49:29
04/03/2009 12:49:29 Job finished

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Error Occured in Extractor

Similar Messages

Maybe you are looking for