Error occured processing parameter

Hi,
I need to set new value for log_buffer. so what I did was i issued the following command at sql command prompt
alter system set log_buffer=50M scope=spfile;
it throws
ORA-012095: specified initialization paramer cannot be modified
so i brought the DB down and I made an entry(log_buffer=50m) in the initfile
and saved. Then, when I try to create spfile from pfile;
it throws error
ORA-91978:failure in processing system parameters
ORA-32003:error occured processing parameter 'log_buffer'
Due to this I couldn't resize the log buffer.
can anyone help me in how to set log_buffer
Please help in this..... I will e grateful to you
OS:AIX
oracle:10.2.0.2.0
Thanks in advance
With Regards
Boo

What are you trying to resolve or trying to accomplish?
Setting log_buffer to 50M doesn't make any sense at all,
as the log_buffer will be written when 1M is dirty or when it's one third full, whichever occurs first.
You are likely wasting some 45M of memory.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

ORA-32003: error occured processing parameter 'distributed_transactions'

Hi,
We are having oracle 10g database on AIX platform.As of now,Our database is running on pfile and We wanted the database to run on spfile.I tried to create the spfile and It is throwing the below error.Could somebody help me out on this issue...
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'distributed_transactions'
LRM-00101: unknown parameter name 'distributed_transactions'
I read the following old thread in this discussion forum related to this error , but I could not find a solution in that thread.
error occured processing parameter

Hi Satish,
I'm not sure.I have taken up this project recently and seeing lot of issues with the databases,might be lack of proper administration.
For some other database also I'm getting the same error for the parameter 'job_queue_interval'
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'job_queue_interval'
LRM-00101: unknown parameter name 'job_queue_interval'
If these are the parameters from oracle 8.1.7,can I comment these out.
or How can I resolve these issues related to the parameters.

Spool Error - Errors occurred processing this print request

Hi,
      I have a problem printing documents through spool.
1. I run a form from Form Builder, execute and select to print from spool
2. In SP02, I select the spool request created and Select Direct Printing.
Spool request Status is changed to error and following is the error log.
I get this for all print requests from spool. When I print these documents directly, I have no problem. I understand there is some problem with the spool server but do not know what it is.
I also observed that when the spool access method is G - I have no problems in printing.
Printer: HP HP laserJet PS (2430)
Host Spool Access Method: L: Print Locally Using LP/LPR.
Device Class: Standard Printer.
SAP NW 2004s SP14
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9 is currently being printed
End of message
Command used: print /d:
bs107.platinumdb.com\HP01 D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 16151
Request name PBFORM HP01 SMULLAPUDI
Client 800
Owner SMULLAPUDI
Request attributes
Time created   2008050118454600
Remaining life +00007235918
Dispo 1 (Go/Hold) H
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device HP01
Default no. copies 1
Format G_RAW
Main print request characteristics
Spool request number 16151
Print request number 1
Print request attributes
Time created   2008050118471500
Output device HP01
Format G_RAW
Character converter active when first problem occurred
No information available
I am working on this since 4 days with no solution. Kindly help.
Thank you,
Vasu
Edited by: subbu M on May 2, 2008 11:37 PM

Hi Sri,
Try to setup the printer at OS LEVEL.
then,
If on Windows---use method C.
if not,
use method U and map to your printer queue at OS level.
Hope this resloves this issue.
Reward Pts if useful
Regards,
Malti

An unexpected error occurred processing your request. Check the logs for details and correct the problem.

Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
Rakesh

Hi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error : An unexpected error occurred processing your request. (Was: Adobe Muse)

I am getting the folowing error message when trying to start up Muse. It asks me to sign in and the following message occurs "An unexpected error occurred. An unexpected error occurred processing your request. Please try again later." I have a full subscription. It has worked fine for the last few months. This issue only occured today but has persissted.

Hello,
We managed to get it resolved.
It should be up and running now.
Apologies for the inconvenience caused.
Regards,
Sachin

Please help I have to update my clients site tonight I have been using muse subscription since Nov 19, 2012 An unexpected error occurred.An unexpected error occurred processing your request. Please try again later.I-2

please help I have to update my clients site tonight I have been using muse subscription since Nov 19, 2012 An unexpected error occurred.An unexpected error occurred processing your request. Please try again later.I-2

Hi Carey,
Please refer to this trouble-shooting guide for the error that you are getting, An unexpected error occurred I -200
- Abhishek Maurya

An Error occurred processing your Request

Hi,
I am using Blackberry Z30, I am from India, today i tried to update few apps and download few apps but i couldnt able to do instead i am getting the error "An Error occurred processing your Request ", can you please help me to resolve the problem...
Thanks in Advance
Regards
Sam

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry App World error message "An error occurred processing your request"

Hi
Since upgrading my Blackberry Q10 to version 10.2.1.2156
I cannot download anything from BB App world, when ever i press download it keeps on coming up "An error occurred processing your request"
I Have tried to restore tne device , Hard/soft resets, Refreshing app world, restoring payment information, nothing seems to work, can anybody help me out please.
I Wanted to try and delete app world from my BB but it does not seem to be a way to do that.
I Have the Blackberry Q10 Model number SQN100-5 Version 10.2.1.2156
Please let me know as soon as possible.

Have you got your problem resolved?
if so, please do let me know how you resolved it.
I am having the same problem.
Thanks in advance.

An unexpected error occur processing your request." when launching Muse

An unexpected error occur processing your request." when launching Muse.I am experincing the same problem i found the folder but when i try to delete the file it says action can not be completed file is open in adobe CC iam not even signed in

Hello,
Could you please open Task Manager (Windows) or Activity Monitor (Mac) and look for processes named either AAM Updater or Adobe CC (Creative Cloud).
Please kill (end) the process and after that try to delete the folder.
Regards,
Sachin

An error occurred processing your last request. Please go back and try again.

Hi, I´m trying to set up a page in BC. Often after changing the content of site and click "update" I get the message:
An Error Occurred
An error occurred processing your last request.
Please go back and try again.
This happens e.g. when I want to change the Template for the page from one to another. Sometimes all changes are lost!
I wanted to build more sites using BC for my clients but with that error messages this would be impossible. I need a system that would work properly.

hopestew,
If still encountering this behavior best track your steps and report immediately to direct support.
http://docs.businesscatalyst.com/
The error message is quite generic and it can stem from server related issues or some odd conflict within the editor/system.
Kind regards,
-Sidney

Urgent Help, An unexpected error occurred. An unexpected error occurred processing your request. Ple

I urgently need my problem solved, I have customers yelling because I can not do what they ask, and canceling a software with such little technical attention?, authenticate and buy something that again and again, I've tried all the solutions posteadas and no works, is really a shame.
I do this step each window as both mac:
http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html

Hello,
We sincerely apologize for this unfortunate incident. We are currently working on restoring networking to our liscensing service and hope to have a resolution shortly.
We will be updating the status bar on the front page of the forum with further information and will write up a review of the events to share with the community when things have returned to normal.
Thanks,
Vikas

Encoding error occurs using parameter "default path for scripts"

Hello,
assume we have a script "/home/artur/tymczasowe/test.sql". I can execute it using SQL Developer by:
@/home/artur/tymczasowe/test.sql
Everything works as expected.
Then I set parameter "Tools - Preferences - Database - Worksheet - Default path to look for script" to "/home/artur/tymczasowe" and executed:
@test.sql
This time national characters has been lost, everyone replaced with "�".
The script content:
--create table a(enc varchar2(8), data varchar2(255));
delete from a;
insert into a(enc, data) values ('cp1250', 'zażółć gęślą jaźń');
commit;
Operating system is Debian Squeeze amd64, Developer version is 3.1.07, Build MAIN-07.42. This problem occurs using previous, 3.0.* versions too.

Hi user633485
Logged bug:
Bug 13779254 - ENCODING DEFAULTS TO NATIVE RATHER THAN IDE SETTING USING DEFAULT PATH
-Turloch
SQLDeveloper Team

An unexpected error occurred processing your request. Please try again later. I-200

This is the error I am getting when trying to sign in to Muse. Please help.

Try http://forums.adobe.com/message/4708670

Error 500: Application error occurred during the request processing

hello gurus!
One thing very strange happened to me, we have a PI 7.1 EP 1, I imported a file. tpz in the Enterprise Service Repository, exported from PI 7.1. and suddenly everything stopped working, the SLD, the SR, the directory, the repository .....
When we tried to access anything in the browser gives us:
Error 500: Application During The error occurred processing request.
The basic team, don`t know the reason, they reset PI but is still not working
nothing.
Can you help please?
Thank you so much.

*Hello Luis,*
*I follow the instructions to do the export / import. Basic team, uptade version kernel and Netweaver Administration and Administration Options, work, but Integration Builder and Enterprise Service Repository don't work.*
*I don't understand, they applies the changes of OSS 1495500.*
*Any idea to do work Integration Builder and Enterprise Service Repository?*
*The details of error are:*
        
        
        
        <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*"/><property name="jnlp.com.
jnlp file truncated after 10K
Thanks in advanced!
Regards.
Verónica.

An unexpected error occurred. I-200

Hi,
I have been having issues in launching Adobe Muse. Everytime I attempt to launch the program it asks me to sign in and then gives me the screen: 'An unexpected error occurred processing your request. Please try again later. I-200'. I have also attempted to re-install Muse but am given the error describing that there is an existing beta version of Muse installed on my computer however I have uninstalled all versions of Muse and cannot see such 'beta' version. I have seen others complaining of this issue on here but I have not found a resolution to it.
Thank-you for any help you can give me.

Moving this discussion to the Help with using Adobe Muse forum. SimoDavid please see http://forums.adobe.com/message/5236666#5236666 where this topic has been discussed.

Error occured processing parameter

Similar Messages

Maybe you are looking for