Error occured when checking type group

Hi Gurus,
I am getting an error during change of routing through BDC
I want to update the MIC  against operation ,but in the last step I am getting the error
like "Error occurred when checking type 5xxxxxxxx"
Please suggest me why this error is coming.
Regards
Arabind

Hi Arabind,
Please check below posts. They talk about similar issue & I think they have the answer to your question.
BDC - Error occurred when checking type $ group $. | SCN
Error occurred in checking type group in qm
Thanks to the original contributers.
Regards,
Ragahva

Similar Messages

  • BDC to assign MIC -:Error occurred when checking type $ group $.

    Hi
    We have developed a BDC program to assign MIC`s in routing operations,at the end of assigning the MIC`s in the operations the system is giving the below message .
    Error occurred when checking type $ group $.  
    Please note that 100% sampling procedure is assigned in MIC`s.
    Please advise how to recfity the same .
    PS :- while creating it manually there are no errors.
    Regards
    Trishna Nambiar

    There was some problem with Sampling unit of the MICs assigned in the operations.  This caused the error. Error log was in Tasklist checklist in the Inspection plan.

  • Help!  SAP-LSO - LSO-AE "A Read-Write Error Occurred when checking in the Object"

    Using version 14 of LSO-AE
    WBT publishes fine
    Error occurs during check-in to Master Repository
    It seems to be a 3rd party WBT created by the NTSB, so I only have the SCORM 1.2 package, no source files unfortunately.
    Thanks in advance for any advice that is offered!

    Figured it out.  Not that this forum helped!  But here is the answer should anyone else have a similar problem on check-in.  The standard setting for the LSO Repository is 100MB.  Trying to check in anything larger than this, caused the above error.  Increasing the configuration setting fixed the issue and allowed successful course check in without the above error.

  • The below error occurs when are opening group policy management editor kindly suggest me what to do

    Problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                            
    mmc.exe
      Application Version:                          
    6.3.9600.16384
      Application Timestamp:                     5215ef8f
      Fault Module Name:                         
    jscript9.dll
      Fault Module Version:                        11.0.9600.17031
      Fault Module Timestamp:                  530882eb
      Exception Code:                                 
    c0000096
      Exception Offset:                               
    0000000000075a36
      OS Version:                                         
    6.3.9600.2.0.0.272.7
      Locale ID:                                            
    1033
      Additional Information 1:                  ec0f
      Additional Information 2:                  ec0f4898764fec44122dfe96fc36b0dc
      Additional Information 3:                  4f6d
      Additional Information 4:  4f6db505997e7dc082983dd077416716

    Hi,
    Would you please let me know edition information of the server where this issue occurred? Was it SBS 2011? Did
    you remember which operation you had done before this issue occurred? For examples, install updates or third-party applications or any other?
    On current situation, please run
    sfc /scannow command to scan all protected system files and monitor the result. Please also check if all necessary Windows Updates were installed.
    By the way, did you encounter any issue when open and use IE?
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    Take a look here:
    http://support.microsoft.com/kb/953266
    If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
    Regards.

  • Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    in OIM 11g R2
    Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • When I check for an update my I pod says, "An error occurred while checking for a software update."

    When I check for an update my ipod says, "An error occurred while checking for a software update."
       I have tried,
    -Rebooting my ipod
    -Hard rebooting
    -Deleting some apps to get more memory
    -Resetting network settings
    -AND WAITING, but it still doesn't work
        CAN YOU HELP!!!!!!!!!!!!!!!!!!!!!?????????????????

    I had a jailbroken ipod touch 4th generation, 8 Gigabyte model with about 150mb left of free storage. I tried checking for an update on my ipod touch using the OTA A LOT OF TIMES but it said, "an error occured while checking for a software update." I finally backed up my ipod to iCloud and iTunes and updated my ipod using my desktop PC. I now have an UNJAILBROKEN ipod running IOS 5.1.

  • "An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

    Kind day, colleague.
    It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
    is a mistake.
    500 Internal Server Error
    "An error occurred when communicating with the server.  Check connectivity with your administrator to determine whether further action is necessary. "
    Accept, is carried out as it is necessary.
    It is a bug or we not correctly realized approval chain?

     issue is  related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
    To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
    update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
    http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
    kirtesh

  • HT1338 when I click on software update it says ''An error occurred while checking for updates.'' Why does it say that?

    So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!

    Something temporarily wrong with your internet connection?
    Be aware that this is a very large file to download, it needs a strong consistent internet connection.
    Have the iPhone on the charger cable too.
    In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware).

  • When i do a softwre update it comes up with an error occurred while checking for a software update

    can you help

    I had a jailbroken ipod touch 4th generation, 8 Gigabyte model with about 150mb left of free storage. I tried checking for an update on my ipod touch using the OTA A LOT OF TIMES but it said, "an error occured while checking for a software update." I finally backed up my ipod to iCloud and iTunes and updated my ipod using my desktop PC. I now have an UNJAILBROKEN ipod running IOS 5.1.

  • The following error occured when searching for on-premises exchange server

    I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
    did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
    When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
    No problems - [email protected]
    Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
    Add a user account and assign a user role
    Getting "Unexpected error occurred" when Setting up an e-mail account for user
    Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
    The user account is created ok just no e-mail address is created for the user
    I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
    When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
    The following error occurred when searching for the On-Premises Exchange server
    When I try to open Microsoft Exchange Management Shell, I get a similar error
    I've download & run EMTShooter which just identifies there is an error & gives me the same error
    I've installed & re-installed WinRM IIS Extensions
    I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
    Still cannot connect to Exchange
    I've trawled through the internet for two days checking & testing every solution but no luck
    I've checked every setting against another Windows SBS 2011 Server we've installed & works
    I cannot find a difference
    Can someone help me or point me in the right direction?
    Peter Ralphs

    Thanks for the reply Cara
    Here's the original error I was getting when opening Exchange Management Console
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I got similar error when trying to access the Exchange Management Shell
    VERBOSE: Connecting to SERVER.myd.local
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],                          
    PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed
    When I opened the Exchange Management Console this week, the error had changed slightly
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
    see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
    This is the result of the Health Check Scan
    Organization: First Organization
    Default Global Address List Changed
    The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
    -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
    -eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
    The default public folder database is remote
    The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
    Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
    Server: SERVER
    Disk timeout changed
    Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
    Client RPC binding found
    The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
    One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
    Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
    I also noticed that the Health Check stated that "The default public folder database is remote"
    Has this something to do with it ?
    Regards
    Peter

  • Internal error occured when writing

    Hi all
    I successfully imported an APO planning area into the quality systems, however the same request ends with error 12 in the production system. Landscape is SCM 5.0 sp8 with BI 7.0 sp12. When i checked the import job RDDEXECL (user DDIC), it shows:
    Date Time Message text Message class Message no. Message type
    07/08/2007 00:02:57 Job started 00 516 S
    07/08/2007 00:02:57 Step 001 started (program RDDEXECL, variant , user ID DDIC) 00 550 S
    07/08/2007 00:02:57 All DB buffers of application server <server_name> were synchronized PU 170 S
    07/08/2007 00:03:17 <b>Internal error occurred when writing</b> D0 054 E
    07/08/2007 00:03:17 Job cancelled after system exception ERROR_MESSAGE 00 564 A
    I thought there will be an ABAP dump, I found this internal error (in bold in the log above). I tried searching for info on this but no help, it does not says error writing to what? Please help.
    Thanks
    Ali

    It seems a syncronization problem..
    You can create a customer message providing the following information:
    1. The symptoms that occurred
    2. The highest Support Package
    3. The current SAP_BASIS Support Package level
    4. The queue that is currently selected
    Header Data

  • Error in executing ABAP program. Error occurred when creating dataset

    hi,
    when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
    This is message:
    java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
    I tried others path name, tried slash or backslash. This is content in code tab
    OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
    *Final Type declarations
    TYPES : BEGIN OF ty_final,
    Y03HOCSINH_HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID,
    Y03HOCSINH_MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH,
    Y03HOCSINH_TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH,
    Y03HOCSINH_GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH,
    Y03HOCSINH_DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI,
    Y03HOCSINH_GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU,
    END OF ty_final.
    *Final Temp Type Declarations
    TYPES : BEGIN OF ty_final_tmp,
    Y03HOCSINH_HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID ,
    Y03HOCSINH_MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH ,
    Y03HOCSINH_TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH ,
    Y03HOCSINH_GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH ,
    Y03HOCSINH_DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI ,
    Y03HOCSINH_GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU ,
    END OF ty_final_tmp.
    *Final Target Type Declarations
    TYPES : BEGIN OF ty_final_target,
    C0_Y03HOCSINH_HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID,
    C1_Y03HOCSINH_MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH,
    C2_Y03HOCSINH_TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH,
    C3_Y03HOCSINH_GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH,
    C4_Y03HOCSINH_DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI,
    C5_Y03HOCSINH_GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU,
    END OF ty_final_target.
    * Table type for Y03HOCSINH
    TYPES : BEGIN OF ty_Y03HOCSINH,
    HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID,
    MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH,
    TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH,
    GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH,
    DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI,
    GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU,
    END OF ty_Y03HOCSINH.
    TYPES: BEGIN OF gs_text,
    line(843) TYPE c,
    END OF gs_text.
    *Structure Declarations
    DATA: wa_final_string TYPE string,
    wa_final TYPE ty_final,
    wa_final_target TYPE ty_final_target,
    wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
    *Table Declarations
    tt_final TYPE STANDARD TABLE OF ty_final,
    tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
    tt_final_target TYPE STANDARD TABLE
    OF ty_final_target,
    tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
    tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
    gt_result TYPE STANDARD TABLE OF gs_text,
    *Variable Declarations
    lv_path TYPE string,
    lv_flag TYPE char1,
    C0_Y03HOCSINH_HOCSINH_ID TYPE
    STRING,
    C1_Y03HOCSINH_MA_HOC_SINH TYPE
    STRING,
    C2_Y03HOCSINH_TEN_HOC_SINH TYPE
    STRING,
    C3_Y03HOCSINH_GIOI_TINH TYPE
    STRING,
    C4_Y03HOCSINH_DIA_CHI TYPE
    STRING,
    C5_Y03HOCSINH_GHI_CHU TYPE
    STRING,
    wa_final_tmp TYPE ty_final_tmp,
    lv_file TYPE string,
    lv_datum TYPE sy-datum,
    lv_date TYPE char10,
    wa_result TYPE string,
    lv_delimiter type string,
    lv_cnt TYPE sytabix,
    *-Cursor Declaration
    lv_Y03HOCSINH_dbcur TYPE cursor,
    lv_tabix_frm TYPE sy-tabix.
    lv_delimiter = iv_delimiter.
    IF iv_hashvalue = 'HVM'.
    *Open/delete output file
    CONCATENATE iv_path iv_filename INTO lv_path.
    *Check for file existence, if found, delete it
    OPEN DATASET lv_path FOR INPUT
    IN TEXT MODE
    ENCODING DEFAULT.
    IF sy-subrc EQ 0.
    DELETE DATASET lv_path.
    ENDIF.
    *Open/create output file
    OPEN DATASET lv_path FOR APPENDING
    IN TEXT MODE
    ENCODING DEFAULT.
    IF sy-subrc EQ 0.
    *Batch Processing
    OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
    SELECT HOCSINH_ID
    MA_HOC_SINH
    TEN_HOC_SINH
    GIOI_TINH
    DIA_CHI
    GHI_CHU
    FROM Y03HOCSINH.
    DO.
    *Check for the counter, only for first batch
    *process new line is required...
    lv_cnt = lv_cnt + 1.
    REFRESH tt_Y03HOCSINH.
    FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
    APPENDING TABLE tt_Y03HOCSINH
    PACKAGE SIZE IV_FETCH_BATCH_SIZE.
    IF NOT tt_Y03HOCSINH IS INITIAL.
    ELSE.
    EXIT.
    ENDIF.
    LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
    MOVE wa_Y03HOCSINH-HOCSINH_ID
    TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
    MOVE wa_Y03HOCSINH-MA_HOC_SINH
    TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_Y03HOCSINH-TEN_HOC_SINH
    TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_Y03HOCSINH-GIOI_TINH
    TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
    MOVE wa_Y03HOCSINH-DIA_CHI
    TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
    MOVE wa_Y03HOCSINH-GHI_CHU
    TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
    APPEND wa_final_tmp TO tt_final_tmp.
    ENDLOOP.
    free : tt_Y03HOCSINH.
    LOOP AT tt_final_tmp INTO wa_final_tmp.
    MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
    TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
    MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
    TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
    TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
    TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
    MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
    TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
    MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
    TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
    Append wa_final_target to tt_final_target.
    ENDLOOP.
    free : tt_final_tmp.
    Clear wa_final_target.
    IF NOT iv_max_row_cnt IS INITIAL.
    Loop at tt_final_target into
    wa_final_target TO iv_max_row_cnt.
    MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
    TO C0_Y03HOCSINH_HOCSINH_ID.
    MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
    TO C1_Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
    TO C2_Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
    TO C3_Y03HOCSINH_GIOI_TINH.
    MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
    TO C4_Y03HOCSINH_DIA_CHI.
    MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
    TO C5_Y03HOCSINH_GHI_CHU.
    CONCATENATE
    C0_Y03HOCSINH_HOCSINH_ID
    C1_Y03HOCSINH_MA_HOC_SINH
    C2_Y03HOCSINH_TEN_HOC_SINH
    C3_Y03HOCSINH_GIOI_TINH
    C4_Y03HOCSINH_DIA_CHI
    C5_Y03HOCSINH_GHI_CHU
    INTO wa_final_string
    SEPARATED BY lv_delimiter.
    IF sy-tabix EQ 1 AND lv_cnt EQ 1.
    CONCATENATE wa_final_string
    lv_delimiter INTO wa_final_string.
    ELSE.
    CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
    lv_delimiter INTO wa_final_string.
    ENDIF.
    APPEND wa_final_string TO gt_result.
    CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
    C1_Y03HOCSINH_MA_HOC_SINH,
    C2_Y03HOCSINH_TEN_HOC_SINH,
    C3_Y03HOCSINH_GIOI_TINH,
    C4_Y03HOCSINH_DIA_CHI,
    C5_Y03HOCSINH_GHI_CHU.
    ENDLOOP.
    ELSE.
    Loop at tt_final_target into wa_final_target.
    MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
    TO C0_Y03HOCSINH_HOCSINH_ID.
    MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
    TO C1_Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
    TO C2_Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
    TO C3_Y03HOCSINH_GIOI_TINH.
    MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
    TO C4_Y03HOCSINH_DIA_CHI.
    MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
    TO C5_Y03HOCSINH_GHI_CHU.
    CONCATENATE
    C0_Y03HOCSINH_HOCSINH_ID
    C1_Y03HOCSINH_MA_HOC_SINH
    C2_Y03HOCSINH_TEN_HOC_SINH
    C3_Y03HOCSINH_GIOI_TINH
    C4_Y03HOCSINH_DIA_CHI
    C5_Y03HOCSINH_GHI_CHU
    INTO wa_final_string
    SEPARATED BY lv_delimiter.
    IF sy-tabix EQ 1 AND lv_cnt EQ 1.
    CONCATENATE wa_final_string
    lv_delimiter INTO wa_final_string.
    ELSE.
    CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
    lv_delimiter INTO wa_final_string.
    ENDIF.
    APPEND wa_final_string TO gt_result.
    CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
    C1_Y03HOCSINH_MA_HOC_SINH,
    C2_Y03HOCSINH_TEN_HOC_SINH,
    C3_Y03HOCSINH_GIOI_TINH,
    C4_Y03HOCSINH_DIA_CHI,
    C5_Y03HOCSINH_GHI_CHU.
    ENDLOOP.
    ENDIF.
    free : tt_final_target.
    IF NOT gt_result IS INITIAL.
    CLEAR wa_result.
    LOOP AT gt_result INTO wa_result.
    TRANSFER wa_result TO lv_path.
    ENDLOOP.
    ENDIF.
    REFRESH gt_result.
    *End of main loop for batching
    ENDDO.
    *Close dataset
    CLOSE DATASET lv_path.
    CLOSE CURSOR lv_Y03HOCSINH_dbcur.
    ELSE.
    DATA: lv_mesg TYPE string.
    CLEAR et_file_return.
    et_file_return-type = 'E'.
    CONCATENATE
    'Error occurred when creating dataset' lv_path
    INTO lv_mesg.
    et_file_return-message = lv_mesg.
    Append et_file_return.
    ENDIF.
    ELSE.
    CLEAR et_file_return.
    et_file_return-type = 'E'.
    et_file_return-message =
    'Installed ABAP program does not match interface definition'.
    APPEND et_file_return.
    ENDIF.
    Thanks for help

    r u able to figure it out..........i got the same error .......can someone help me fix this issue

  • "software update"  "An error occurred while checking for updates"

    When I click on "Software Update", an error results, "An error occurred while checking for updates".  It is definitely connected to the internet.  I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5.  That version of Safari does not display pages correctly.  E.g., support.apple.com/downloads just clocks on the righthand side of the page.
    Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server.  Thanks.

    Thanks,  I upgraded with your info.
    Ultimately, I am trying to access mail.google.com but receiving  the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
    Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
    I can access ask.com and using opera to type this response.

Maybe you are looking for

  • HT4623 I have the updated ios6 but my I tunes will not open at all. How can I fix this?

    I don't know how to fix my I tunes I can log onto it on throw the Internet so I know it's the right password. I have the updated ios6 software and have tried everything I can think of. Logging out and turning off the IPad and starting it back up tryi

  • Is it possible to attach a video monitor

    I would like to attach a video monitor to my imac, that doesn't just mirror the screen. I need the signal to be converted to analog. can i do this via firewire somehow. I've herad that i need a converter box of somesort but i need more detail. Anyone

  • Org Structure - "No attribute found for scenario BBP"

    SRM 7.0 Extended Classic Scenario Hi, On the check tab for the Central Person (SRM 7.0 shows CP instead of BP in org structure) I have the message "No attribute found for scenario BBP".  This is SAP message number 5AT103 Transaction BBP_BP_OM_INTEGRA

  • Is 32-bit okay?

    I'm in the proces of downloading the CS6 Master Collection onto a 32-bit Dell. Is that going to work? If not the whole collection, will parts of it work? Thanks! Tree

  • Function with lower case parameters

    Hi all, Can anyone explain me how to create import parameters for a function which allows and passes lower case characters? In a abap program is done like this parameters: user(64) type c lower case. Thanks for any help? Jan