Error Occured when trying to progress through the workflow

Tried to move a project from one stage to the next in the workflow and an error popped up saying,
Workflow: Workflow Terminated
An error has occurred in the workflow.
Now when you open the project in PWA instead of seeing the image of the workflow there is a message that reads,
Stage Status image - There is no workflow status to communicate because the project is not yet created
Any thoughts....

EPM Admin
Try restarting the workflow.  If that doesn't work, then you need to provide a whole lot of details on how the workflow is built, what version you are running, was it working before etc.
CHeers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Similar Messages

  • Adobe Authentication Failure error occurs when trying to log into the Reader (eBook) Store or activate a device.

    Solved!
    Go to Solution.

    This error will occur when your Reader Store login information (email and password) do not match your Adobe ID login information (email and password). When you create a Reader Store account, an Adobe ID is automatically created. If one already exists for your email address, the passwords must match or you will be prompted with this box to provide the different password. You may also see the error codes 2055, 2057, 2052, 2053, 2056 or 2059 for this issue.
    When the Adobe password is changed, the Reader (ebook) Store password will not change. You can change your Reader Store email address or password to be the same as your Adobe ID (account) or password to avoid the previous step any time you authorize a PC or Reader in the future.
    IMPORTANT: Both the Reader store and Adobe passwords must be between 6-12 characters. Adobe and Reader Store passwords can be different. However, it is easier to access content if the same password is used for both accounts.
    NOTES:
    If you don't remember your Adobe ID or password, you can go to the following link for assistance: http://kb2.adobe.com/cps/167/tn_16721.html
    Customer Support is open:
    8 a.m. to 12 a.m. (Eastern time), Monday - Friday
    9 a.m. to 8 p.m. (Eastern time), Saturday and Sunday

  • "An internal error occured" when trying to launch off the network.

    Hi Gents,
    We are running Abobe reader 9 on a RM CC3 Network and found that when a station or laptop is not on the network you get a error when tryin to launch adobe reader.  "An internal error occured" then another error box with reference to memory not being read.
    When runing reg mon I notice a process just as the application starts and says "set Value" then sets a registry value in
    HKCU/Software/Microsoft/windows/Current version/Explorer/Shell Folder/appdata  (N:\Mysettings\AppData)
    I would like to application to as default set the app data folder to the local drive and always look here instead of looking on the network drive.  This is causing problems when poeple are taking laptops home.
    Any ideas would be much appreciated
    Cheers Mike

    EPM Admin
    Try restarting the workflow.  If that doesn't work, then you need to provide a whole lot of details on how the workflow is built, what version you are running, was it working before etc.
    CHeers!
    Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
    Website http://www.WhartonComputer.com
    Blog http://MyProjectExpert.com contains my field notes and SQL queries

  • An error occurred when trying to access the service

    I'm asking myself why I purchased a one year subscription to Adobe Reader to convert PDF files to Doc files, when it NEVER WORKS and no one seems to be able to help me!!! I am on a Mac Book Pro with Yosemite (don't upgrade it slows your Mac badly) and whenever I try to convert a pdf to a doc I get 'an error occurred when trying to access the service', can anybody help me please?

    Hi Cedric,
    The customer service number is 800833687
    The direct link for chat support is: http://adobe.ly/19llvMN
    You need to click on 'Still need help' to initiate the chat session.
    Are you getting this error: "an error occurred when trying to access the service" while trying to access the service via Reader.
    Try using the link: https://cloud.acrobat.com/exportpdf sign in with your Adobe ID and try to convert a pdf to doc and check if that works for you.
    Reards,
    Rave

  • When I click Convert to Word docx, I receive the error message -- "An error occured when trying to access the service." This has been happening for about a week.

    Export PDF will not convert a pdf to MS Word. This failure has been going on for about a week. The error message is "An error occurred when trying to access the service." What can I do to get this working again?

    Hi,
    It seems it was working fine earlier.
    Is this happening with all files?
    You can try using different browser.
    Regards,
    Florence

  • 'An unknown error occurred when trying to play the...

    Hello,
    I have had a BT Vision package for a few months but we recently moved house and wanted to transfer our services. Since moving in, we have got the telephone, internet and TV channels working however we are struggling with the additional TV services (i.e. catch up, recording, on demand).
    Everytime we try to play something on catch up or via on demand, or try to play a recorded programme, it attempts to load but then the following error message appears at the bottom of the screen in a red box - 'An unknown error occurred when trying to play the video OutputProtectionEnableFailed'
    I have phoned BT's technical department on several occasions who have not been able to resolve the issue. I have tried Googling this error message and searching BT's website however I cannot find any comments about this error. BT have offered to send a technician out however will automatically charge £99 if this is an error with the cable rather than the BT box. This is a lot of money and I am not able to risk this potential charge when I'm not sure what the problem might be.
    If anyone know's what might be causing this , or has had the same error message themselves, I would be very grateful to know.
    Many thanks,
    SHyde

    Sounds as though you may have an account not properly set up. Drop the Mods a note and they can check what's going on with your account
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

    I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

    Do you mean trying to purchase an iPhoto book?  Try rebooting and ordering again.  If that fails Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
    OT

  • I am unable to covert a pdf to word. I get;"A error occured when trying to access the service

    I am unable to convert a pdf to a word doc.   I get, "An error occured when trying to access the service"

    This is the Reader forum, and your question seems to be related with ExportPDF. If it does, you should ask here:
    http://forums.adobe.com/community/exportpdf

  • A network error occurred while trying to communicate with the server.

    Hello All,
    I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
    I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
    In console I'm seeing these errors when I try to access various services:
    2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
        "<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
    ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
    I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

    Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
    We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
    So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
    Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
    I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

  • "an error occurred when trying to change modules"

    When I switch repeatedly between Library and Develop with the R and E keys, I always sooner or later run into a problem where nothing happens when I press R. Really that should go the Develop module and enter crop mode -- what I'm usually trying to do, when this happens, is crop a bunch of photos. So I'll be using Library mode to identify the photos that need cropping, stepping through photos with the arrow keys, then when I find one that I want to crop, I press R, enter develop+crop mode, crop the photo, press E to return to library+loupe view, and continue.
    Sometimes this works 10 times, sometimes it only works twice, but always, relatively soon, when I press R, "nothing" will happen. Actually what's happening is an error dialog appears saying "an error occurred when trying to change modules", then the error dialog immediately disappears before I can read it. I know what it says, because if I click the Develop module with the mouse, I get the same message but it sticks around until I press OK.
    Once this happens, I'm entirely unable to use the Develop module until I quit the program. I had to quit and restart LR about 20 times during an hour of working with it last night, and this morning, in the first 15 minutes, I'm already on the 3rd restart.
    Anyone else see this?
    Details: LR 1.1 on Mac OS 10.4.10, 4-core Mac Pro, images are a mix of JPG from a pocket camera and NEF from a Nikon D40. I don't think it is related to the specific images, as it strikes apparently at random, and after exit and restart, I can crop that same photo, but a different one will eventually cause the same problem again.

    Sean, thanks for the Return key tip. I knew about that at one point, but lately I was trying to use Enter (the one on the numeric keypad, at the very lower right corner of the keyboard, which is really easy to hit with my thumb even when my hand is on the mouse! And Enter doesn't invoke the crop, so I forgot that Return did). That is a better way.
    I don't see the RE problem on my MacBook, only on my desktop computer, and that one is also experiencing other flakiness (
    metamatt, "missing text / thumbnails / many Lightroom UI elements disappeared" #, 18 Aug 2007 3:08 pm) so I think I'm going to try a complete reinstall there.

  • An error occurred while trying to communicate with the web browser.

    I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
    Only the FF browser is open.
    When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
    When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
    [Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
    Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
    Thank you!

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Adobe Shockwave for Director Netscape plug-in, version 10.2
    # Adobe PDF Plug-In For Firefox and Netscape 8.2.4
    # Shockwave Flash 10.0 r22
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Adobe Reader]] plugin to the latest version.
    *http://get.adobe.com/reader/otherversions/

  • An error occurred while trying to connect to the provider

    Hi Experts,
    I have written a custom connector to the UWL. This is first time I am working on this concept. After writting I was deployed the PAR into the portal and configured UWL settings. But When I check the UWL it is showing "An error occurred while trying to connect to the provider" in details it is showing " Time out occured. Time taken is more than 30 seconds"
    Can you please tell me what might be the problem.
    Thanks a lot

    Hi Xinjiang,
        Thank you for your reply. I am facing an issue when I Login and open 'Work Overview' screen the warning message shows as 'An error occurred while trying to connect to the provider' when I click the Detail button I am seeing 'Actioninbox' status 'timeout' message 'Time out occurred. Time taken is more than 30 seconds'. My requirement is to stop display this warning message. I have read many thread and some of them answer, I tried the below suggested thread but still i am facing the issue.. Your help will be really appreciated...
    /thread/770521 [original link is broken]
    Best Regards,
    Jr.SRM

  • Unknown error occurred when trying to play film clip in Facebook.

    Since the latest update I have problems when I want to watch film clips posted on Facebook.
    This only happens with clips that are shown "in" Facebook, if it's a link to a clip outside of Fb it's not a problem.
    When trying to watch a clip it says, either directly or various times into the clip, "An unknown error occurred when trying to play a film clip".
    if I try over and over again the clip finally plays to its full length but it really annoys me.
    Anybody got an idea?

    We got some reports of this lately and as you say, it only happens in Facebook.
    Try clearing data for the Facebook app under Settings -> Apps and se eif that helps. If not, please see this thread: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Facebook-Videos-not-playing/m-p/727861
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • TS3623 Downloading error occurred when trying to playback movie

    Downloading error occurred when trying to watch a movie bought on apple tv

    Dear Zita,
    I error is related tot he message which you get "No more handles".
    This definitelly means that there is a bug and old files are not closed , thus the number of handles on OS level is exceeded.
    The exact way to debug the "handles" leak is with applying SAP JVM Profiler, using the I/O Analysis feature.
    http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a67d7d-36e9-2a10-3a99-94fc8caaea0e
    Best Regards,
    Sylvia

  • Communication error occurred when trying to connect to server

    I am using RAS SDK to connect to the BO server. While running the report for performing opendocument, it's giving the following error.
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
    detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
         ... 38 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
         at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
         ... 52 more
    Please help me to solve the issue

    Using BO SDK i am connecting to the BO Report Server, to fetch the BO Reports, But while trying to run the report, i am getting the following error.
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
    at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
    at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
    at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
    ... 38 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
    at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
    ... 52 more
    Please someone help me with the following issue.

Maybe you are looking for