ERROR occured when update the ""Rescue and Recovery 4.2"".....​.

dear all, i'm a newbie with the TP notebook, and i'm a chinese , sorry for my POOR english !!
hope you all will understand what i explain now......
i just buy a T61 last nite, but when i try to "UPDATE" my system, two error message shown to me.........
Error 25013: Error obtaining the Rescue and Environment drive letter
Error 25012: Error accessing the Rescue and Recovery service partition
at last, i can't finish the "Rescue and Recovery UPdate" anyway !!
and i've try to download the "Rescue and Recovery 4.2" from the web manually, but got the same error occured !!
anyone try before ?
pls help me to solve the problem !!
P.S. because i just buy my T61 within 24 hrs, i'm so worry about this !!
thanks so much !!
Regards

Hi Mark,
Good idea!  No luck though, although my R&R partition is still healthy and boots nicely.  I'm wondering if the solution wasn't actually the removal of your second hard drive.  Other threads discuss how getting rid of network shares helped similar problems, as R&R wanted to use drive letters that were already taken by network drives.  Me, I've got an "F:" that's my swap partition and a "G:" that's my fat32 partition.  If the R&R upgrade program is hardcoded to mount the hidden partition as "F:" (for example), rather than trying to dynamically grab the first available drive letter, I could understand what was going on.
I'd unmount my F and G partitions if I knew how to do so in windows, but don't know of an nondestructive way to do this.
With a specific idea like this my normal (linux) next step would be to go read the source and find out if that really is the problem.  Can't do that in this case unfortunately, but if a Lenovite happens to be reading this forum and can direct me to the proper place to submit a real bug report, I'll do so.  Can only find service call info on the website, which doesn't help to submit a bug.
   Alec

Similar Messages

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • When downloading this update an error occurred. Close the process and try you later again it.

    I have Apple iMac and OS X 10.10.1 - Yosemite and Photoshop CS 5
    Update from Bridge CSS 4.0.5; Photoshop 12.0.4 for Photoshop CS 5; Camera RAW 6.7-Update; Update for Extension Manager CS5 5.0.
    I have this error for one year:
    When downloading this update an error occurred. Close the process and try you later again it.
    And with Mac OS Yosemite the printer menu does not fall. Does not function to printing any longer

    Hi @artem98765,
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that when you tried to do a recovery back to factory you received the error incomplete recovery.
    As you did not state if how you were doing the recovery I will include documentation for the process along with a troubleshooting document.
    HP PCs - Performing an HP system recovery (Windows 8)
    HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)
    If you are still unable to complete the recovery please contact HP support for further assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How to make the RESCUE AND RECOVERY hidden partition when changing the hard disk drive

    I've got T61 and I'd like to know if is it possible (in case of changing the HDD) to make the RESCUE AND RECOVERY hidden partition  on the new hard disk drive? If yes - please let me know how to do that.

    hi you the rescue partition is made automatically when you use your recovery cd's on the new HDD so no problem there!
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Error 25011. A file required to install the Rescue and Recovery environment could not be located

    Hello everybody,
    May I have your help and support on this error I faced with in installing the new Rescue and Recovery Version 4.5
    "Error 25011. A file required to install the Rescue and Recovery environment could not be located. This setup cannot proceed. Make sure that the correct .tv.t file is located in the same as this setup package and restart this setup."
    Awaiting,
    Thanks
    Hossein

    heya,
    I hope you managed to sort your issue out.
    It's namely mentioned here - http://www-307.ibm.com/pc/support/site.wss/MIGR-69170.html
    cheers
    norbs

  • 'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

    'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

    One of the following steps should help.
    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:  > "Enable Plug-ins".
           or
        Internet Plug-ins >  "Allow all other plug-ins
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes beside all items.
        Check the box beside "Remove all website data".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • Issues with a T61 harddisk, UNMOUNTABLE_BOOT_VOLUME, cannot also get in the Rescue and Recovery

    Dear Lenovo Support Community,
    I have a T61 with XP pro on it. This is the history of my harddisk problems with it:
    (the harddisk is HDD0 Fujitsu MHW21160BJ G1 and everything in laptop (HW and SW) are same as the factory sold one)
    1. Unfortunately I had not made any recovery cd/dvd when the computer was healthy
    2. Some time ago, after a crash, and during the chkdsk in the following boot up, harddisk showed 12kb bad sector
    3. Due to more crashes and not being able to login once, went to rescue & recovery and only recovered OS to an old and healthy state. Kept my data, lost all the new programs installed but got the OS fine and running. --> I guess the bad thing that may have happened is that recovered OS may have used those bad sectors as well, but this is just a guess.
    4. Problems, slow downs, the 12kb bad sector, issues kept coming back every couple or few weeks. Repeated the rescue and recovery OS installations another two times.
    5. Few days ago, all was good, but needed to restart, but this time a blue screen came up with UNMOUNTABLE_BOOT_VOLUME. This screen comes up even if I try to go into safe mode, with networking, or even with only DOS prompt.
    6. Tried to go to rescue and recovery (version 4), it took a really long time and was telling me that something wrong with the file \minit\setupapi.log and after a long long time that it got in the page for rescue and recovery, it was not doing anything by clicking on any of the buttons.
    7. Took the hard out, connected it through an external enclosure to another computer, the main drive could not be read at all, I/O error, not distinguishable.
    8. But the SERVICE drive was understood and I could even run chkdsk /F F:\ on it and it repaired the file mentioned above (\minit\setupapi.log).
    9. Put the hard back into T61, went to rescue & recovery, this time the error on the file was not showing up, but since the step #8, I have not been able to get pass the initial screen of rescue & recovery. It doesn't go in at all.
    10. Found it through Google search, the famous post on this forum about fixing the Master Boot Record. Got the little program, burned on a CD, went through all of its steps, finished as described in the famous thread, but I am not sure if it has been any help to me so far.
    11. In few other occasions, connected the hard through the external enclosure to another computer and found online and used programs like Disk Doctors Windows Recovery Data and EASEUS Data Recovery Wizard and was able to just read inside both NTFS main disk and FAT32 service disk (windows can also read the service disk but cannot read the main disk). Using the free version of EASEUS, I could even read and save my personal data since my last backup, so I am good to even format the T61 hard but still I don't want to give up on that.
    12. While the lenovo harddisk is in it, in a restart went to BIOS (F1) and ran the harddisk diagnosis, It said: "Pass: Controller Diag, Error code 0000: Read verification failed". And after the "Test complete", it gave a red message in the middle of screen that "<<< An error was found. Call for service >>>"
    13. As mentioned in #1, I don't have Lenovo's recovery Windows XP CD(s) for T61, but I have some other windows xp installation CD's, I thought I can put them in CD drive, boot up from CD, and try to recover or repair the windows, It seems that they tell me there is no harddisk in your computer!! When I press "R" to go to recovery console, it tells me: "Setup did not find any hard drives installed in your computer."
    My questions for dear members of this forum are:
    1. Can I recover my T61 harddisk with the above description? It is being read nicely with the recovery programs, so it should have not been damaged seriously. Please guide me to other things that I can try?
    2. I can see and read the Service part of the drive from Windows (no recovery program needed) while connecting the drive through external enclosure to another computer. Can I run a program from the Service part of disk and make those T61 Recovery CD and DVD?
    3. If I purchase the Recovery CD(s) from Lenovo, would they be doing any magic or help in my case described above?
    4. Can I make recovery CD(s) from another T61 laptop and use them for mine?
    Thanks all for reading my long post and helping me. God Bless.
    Best Regards,
    AL_K

    Step One: Install windows
    Step Two: run system update
    Step Three: Your done (optionally have a beer and relax)
    Sorry, step three was a bit of humor I added.
    Actually these recovery CDs were produced before the first T61 was made, probably in 2006. The T61 line was replaced in 2008.
    You can activate with the code on your COA, I've done it many times, just make sure you do a full (new) installation, not an upgrade, from an oem disc.
    If you do end up using the original product recovery disc set, your steps are more like this...
    1. Install disc one...   wait 30-60mins
    2. Install disc two...   wait 30-60mins
    3. Install disc three...  wait 30-60mins
    4. Install disc four...   wait 30-60mins
    5. Install disc five...  wait 30-60mins
    6. Install disc six...   wait 30-60mins
    7. Install disc seven...   wait 30-60mins
    8. Install disc eight...  wait 30-60mins
    9. download latest service pack for windows and install (over an hour)
    10. Install (replace old version)  system update and run.
    11. go to windows update and update several years worth of patches and hotfixes. (1-4 hours)
    12. kick back and have a warm beer and cold pizza, if there is any left after I finished hours ago and celibrated already.
    Also, after going through all that, you've not only installed windows, then replaced nearly the entire operating system, but you've also used valuable harddisc space to make several redundant copies of the outdated files, drivers and apps. 
    Please understand, I'm not saying the recovery discs are a bad design, they work great, and back in 2006-7-8-9 I'd happily go through all that work, but today all the stuff on them is to old so it's futile to go through all that. It would be really nice if Lenovo updated the install discs, and we could download the latest version to use, but they basically just leave them untouched after the model line is released, so nothing on that disc is newer then about 2006.
    I'll also add that both George and I have done this well over 100 times each, so we wouldn't be suggesting this if it wasn't the best option, but in the end you'll have a working system no matter which route you take to get there, so the only question to ask yourself is...
    Do you like your beer cold and your pizza hot  
    Good luck, and enjoy your endeavours
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • "An error occurred while updating the configuration"

    I recieved an Apple Airport Base Station in the mail today. I got it second hand, and I performed a hard-reset since I didn't have the password and stuff. I wanted to update it properly before I started using it.
    I have followed the guides in here point by point, but all I get when I am trying to connect with the AirPort Admin Utility is the error in the topic: "An error occurred while updating configuration".
    I've been surfing and googling for hours now, and can't seem to find the solution to this.
    The Base Station has a model no. M8440, and that's all I know about it. First I thought it was the Snow, then the Graphite and now I don't know. The reason I get confused is because I've read about all these different colored lights.
    Here's a description of my Base Station - in case someone recognized it, and can help me identify it:
    - It's one of those "UFO's"
    - It's all white, with a silver Apple-logo
    - It's got three ports: Modem, WAN and LAN
    - It's got three lights - ALL WHITE all the time.
    I've tried to download firmware - the last I tried was called AirPortFW4.0.9.img - but when I try to run it by clicking it I get the error "The destination folder "AirPort whatever firmware whatever" is on a locked volume.
    My computer is a 2,0 HGz MacBook Pro, and int the AirPort Admin Utility the Base Station is said to be V4.0 dev with IP 192.42.249.13 - so it seems to be hard-resat all right...
    Please folks...help me out!

    I've also encountered the same problem with an older dual ethernet airport.
    I first started having problems with the original one about 8 months ago, and after spending a ridiculous three hours on the phone with AppleCare they sent me out a refurbished replacement. That one worked fine for about 5 months, but then started dropping the signal again, before becoming "unfindable". I went through the same processes, (soft reset, then hard reset etc.) which sometimes solved the problem. I eventually I took it to an Apple Store and of course, it worked fine once I got there. Strange thing is, I took it home and it continued working without incident...for a month. When it happened again, I decided to forgo all the the diagnostic work and just take it back to the store. Sure enough, it fixed itself again, then broke again a few weeks later (now).
    Unfortunately, I just had knee surgery and can't get down there now, (which was getting ridiculous anyway), so I went through everything again for the first time on the MBP. I ended up getting the "An error occurred while updating the configuration" message, and after reading this thread started up the old TiBook. The reconfig worked on there, but it still isn't visible on either computer. In fact, it then becomes inaccesible even through LAN on the TiBook through either the AirPort Admin or the dropdown, though it did appear on the MBP via AirPort Admin. However, it says the software on the airport cannot be uploaded or changed due to out of date software on my computer, and suggests I go to apple.com/support to update my computer's software, which is already current. It does however say that I may be able to change the settings and so forth, which I was able to do. Unfortunately, it still does not show up anywhere else on either computer, no matter how much I tinker with the settings.
    Any ideas? I suppose I'll just stick with built-in ethernet till I am mobile again.
    MacBook Pro 15 Intel Duo Core 2.16GHz 2GB/100GB Serial ATA drive@7200rpm   Mac OS X (10.4.7)   '02 Titanium Powerbook G4 1GHz 1GB/60GB/Superdrive (currently awaiting a new hard drive)

  • App-v 5.0 SP2 hotfix 5, an error occurred when querying the App-V WMI provider

    Hi,
    We have installed App-v 5.0 SP2 + hotfix 5 (via SCCM 2012 R2 CU1) on some Windows 7 clients. That worked fine but no app-v applications go through.
    Error:
    AppVPackageQueryClient5X::GetPackageDataByPackageGUID() failed for virtual application [a835fa1-f82a-4efe-957a-8c6678d4a431]. (0x87d01290)    AppVHandler    5/08/2014 10:23:56    3440 (0x0D70)
    CAppV5XHandler::DiscoverIndividuleApp() failed. (0x87d01290)    AppVHandler    5/08/2014 10:23:56    3440 (0x0D70)
    +++ Discovery of application [AppDT Id: ScopeId_8B8D93AF-5181-48FE-9202-2CFE5FC93EE2/DeploymentType_50eba242-3688-4b4f-9b61-84f0123f667d, Revision: 7] returned an error (0x87d01290).    AppVHandler    5/08/2014 10:23:56  
     3440 (0x0D70)
    CAppV5XHandler::DiscoverApp() failed. (0x87d01290)    AppVHandler    5/08/2014 10:23:56    3440 (0x0D70)
    Deployment type detection failed with error 0x87d01290.    AppDiscovery    5/08/2014 10:23:56    3440 (0x0D70)
    Failed to perform detection of app deployment type Microsoft - Console, revision 6) for user. Error 0x87d01290    AppDiscovery    5/08/2014 10:23:56    3440 (0x0D70)
    Error = 0x87d01290 =  An error occurred when querying the App-V WMI provider.
    Please advise on this specific error. Should we look for corruption in app-v client, problem in sccm client ...?
    J.
    Jan Hoedt
    Update: clients which don't have problems are client which had hotfix 4 THEN hotfix 5 installed. Should we install it that order? Client WITH problems have App-v 5.0 SP2 then hotfix 5 directly.
    Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
    Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.

    I think we found a solution ourselves.
    My update2 (question) explains it:
    Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
    Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.
    We installed App-v 5.0 SP2 via exe then installed hotfix via msp (extracted msp), this doesn't seem to work (though installation was succesfull). When we deploy the hotfix via the exe it works correctly.
    Not sure why though.
    Jan Hoedt

  • The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

    The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
    We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
    and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
    The SQL Server Analysis Server is 2012 SP1

    Hi RB_ORIPW,
    The table with name of 'XXX' doesn't exist.
    An error occurred when loading the model(Micorsoft.AnalysisServices)
    If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
    The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
    You can access Windows Event logs via "Administrative Tools" --> "Event Viewer".  SSAS error messages will appear in the application log.
    The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
    Data collection for troubleshooting Analysis Services issues
    Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
    http://support.microsoft.com/kb/2897263/en-us
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • "An error occurred while updating the default player for audio file types"

    Getting ready for a deployment of version 9.2 of iTunes for 1400+ users.
    Getting this error when a 'normal' user goes into Edit/Preferences of iTunes and makes no changes.
    "An error occurred while updating the default player for audio file types. you do not have enough access privileges for this operation."
    I've elevated privileges of the C:\program files\itunes directory for this user to Full Control however problem remains.
    Tried to modify the folder to remove 'read-only', as found this suggestion on here, but read-only keeps applying itself.
    User has full rights to the location of the media as specified under Advanced Tab. If I tick 'Set as default media player' and remove tick and then click OK I do not get the error. From what I've read it's affected older versions of iTunes also.
    Doe anyone have any other suggestions?
    Thanks in advance.

    I had a similar issue. Turned out that - somehow - one of the directories or files in my iTunes music folder had gotten set to read only. Fixing it was easy.
    Go to Edit/Preferences.
    Choose the Advanced tab
    in the General subtab select the contents of the box labeled "iTunes Music folder location"
    Click Start, choose Run
    Paste the location
    Press the button to move up one level
    Right-click the music folder, choose Properties
    If this is your problem, the read-only box will be a solid color or checked. Set it to empty and choose the default "apply to folder and all subfolders and files." This will set everything in there readable, which after I did so I stopped getting the error.

  • An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError)

    Hello,
    I'm not sure when (I suspect SQL 2012 SP1 CU3 and Windows Updates) reporting stopped working.
    In Internet Explorer I have error:
    An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError)
    Get
    Online Help
    For more information about this error navigate to the report server on the local server machine, or enable remote errors
    In MSSRS logs lot of:
    library!ReportServer_0-1!15f4!03/31/2015-00:00:42:: i INFO: Call to ListChildrenAction(/, False).
    library!ReportServer_0-1!15f4!03/31/2015-00:00:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: , Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: An error occurred
    when invoking the authorization extension. ---> System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: The type initializer for 'Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess' threw an exception. (Fault Detail is
    equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is:
    System.TypeInitializationException: The type initializer for 'Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess' threw an exception. ----> System.Exception: Exception decrypting. The specified file could not be decrypted
       at Microsoft.EnterpriseManagement.Security.DPAPIWrapper.Decrypt(Byte[] cipherText)
       at Microsoft.EnterpriseManagement.Security.AsymmetricKeyManager.Initialize(Byte[] publicKey)
       at Microsoft.EnterpriseManagement.Security.SecureStorageManager.Initialize()
       at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess.get_secureStorageDatabaseManager()
       at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess..cctor()
       --- End of inner ExceptionDetail stack trace ---
       at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess..ctor()
       at CreateMicrosoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessBackCompatProxy()
       at Syst...).
       --- End of inner exception stack trace ---;
    MSSRS version is 
    Microsoft SQL Server Reporting Services Version 2011.0110.5058.00.
    I tried to delete all encrypted content, restart SQL and Reporting few times, install last Windows Update updates and don't have idea what to do more.
    SQL and MSSRS services are working on domain accounts, nothing changes.

    Hi LukaszH,
    Thank you for your question. 
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. 
    Thank you for your understanding and support.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Unable to access the Rescue and Recovery workspace upon reboot

    Hello forum.
    I have a problem with getting access to the Rescue and Recovery area when I reboot.
    Even though I have tried to hit both Enter, F11 and Lenovo Care bottom, I still do not get access to the Rescue and Recovery area. Instead the system just boot as normal, and Vista starts up. However hitting the F1 I get access to the BIOS, so can anyone help me with a solution on how to get access to the Rescue and Recovery area??
    Regards
    Bjorn

    Hello Bjorn, welcome to Lenovo forums!
    Sorry about your situation, but forum rules prohibit any password bypasses.  You'll need to get relief from the previous owner.  Locking thread. 
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • An error occurred when processing the spool request.  (Possibly due to memory problems)

    Hi SAP,
    My backgroud job is failing with log as shown below
    Job started
    Step 001 started (program ZMRS0065, variant SUS
    Step 002 started (program ZDRS0090, variant SUS
    Step 003 started (program ZFRS0305, variant SUS
    Step 004 started (program ZFRS0300, variant SUS
    Access error
    Job cancelled after system exception ERROR_MESSAGE
    An error occurred when processing the spool request.  (Possibly due to memory problems)
    Kindly help out in this issue
    Regards
    Mohammed

    Hello Mohammed,
    Have you seen any error in your SM21 system log and developer trace of spool work process
    during that time?
    The maximum size when create spool is 2GB.Pls also check if you are creating a spool
    larger than it.
    Best Regards
    Jie Bai

  • Failed to execute with the error Error occurred when starting the parser: t

    Dear All
    I am getting this error
    ""A database error occurred. The database error text is: The MDX query SELECT  { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK]  failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
    I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
    I already implemented note 1032461

    Hi,
    Under normal circumstances it should be enough to restart the connection service.
    As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
    Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
    All the Best,
    Madhu....

Maybe you are looking for