Error Occured While Creating message class 8II In SapNote 1486147

Dear All
I applied SapNote 1486147 but at the time of creating message class 8II
It shows error like this
Object MSAG 8II is in reserved name range for sap partner
Any body help on this.
Edited by: chandrap on Feb 24, 2011 2:08 PM

Hi Yasir,
remove the jaxb.jar from the WEB_INF/lib and move
them to your SUNWappserv/lib/endorsed - dir, together
with the following jars:
dom.jar jaxb-api.jar jaxb-impl.jar jaxb-libs.jar
jaxb-xjc.jar namespace.jar relaxngDatatype.jar
r xalan.jar
xercesImpl.jar xsdlib.jar
(restart the deploytool if used)
This should work,
Bas van OudenaardeHi Bas
Thank you for the very useful tip but I don't seem to have a SUNWappserv/lib/endorsed - directory inside my .war archive , could you please advise on this issue

Similar Messages

  • HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

    I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
    Help me Obie One Canobie you are my last hope

    I have confused myself with the facts!  Started out keeping track of every step and every variable but have sort of lost it as we progress here.  First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question.  Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option.  Then powered down the computerator.
    Next started up computerator.  Turned Time Machine ON  and experienced multiple successful backups!  Then I started up a few applications, Mail and Text Edit (but not Safari so far).  Had a few more successes.  After each backup, I used Disk Utility to verify the backup disk is still OK.  This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
    Put computer to sleep for the night.  Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD!   Did a restart and verified the backup disk... OK.
    Did a few    Sleep-bad, Restart -OK    repetitions.
    It seems consistent:  Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
    =============================
    Now then, I don't understand everything I know here.  Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier).  Is there any truth in this?
    I may abandon this Seagate thing for something more compatible.  What's out there that we know works reliably for us?

  • HT3275 I get the following message - "Time Machine could not complete the backup."  "Unable to complete backup."  "An error occurred while creating the backup folder.""

    I get the following message - "Time Machine could not complete the backup."  "Unable to complete backup. An error occurred while creating the backup folder."" 
    This MAC is partioned with Windows 7 with only  50 gig devoted to Windows so my son can play Flight Simulator X on the machine. 
    I have a WD Passport External Hard Drive for the Back Up
    I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message.  Any thought?
    Maxx

    Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
    You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
    Reset the TM to the new name.. use the A4 in Pondini's great KB.
    http://pondini.org/TM/Troubleshooting.html

  • HT3275 Got the message "Unable to complete backup. An error occurred while creating the backup folder."

    My time machine backup has stopped working. I received an error message that is not one listed on the support page: "Unable to complete backup. An error occurred while creating the backup folder."  I am on a new MacBook pro running Mountain Lion and using a 1 TB Passport drive as a time machine backup. Running DiskUtility finds no problem on the Passport.

    See #C10 in Pondini's excellent Time Machine Troubleshooting.
    http://pondini.org/TM/Troubleshooting.html

  • An error occured while creating the original attribute for message no26 296

    Hi All,
              I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
    An error occured while creating the original attribute for
    Message no. 26 296
    Diagnosis
    An error occured while creating an original in the Knowledge Provider.
    System Response
    The original could not be created.
    Procedure
    Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
    Please let me know what configs i am missing ...
    Thanks in advance
    regrds
    pushpa

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    Hello Drake, I suspect one or more of the Drives needs repairing, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • I am getting this error message on my iMac. Time Machine unable to complete backup. An error occurred while creating the back up folder. Any ideas on how to fix???

    i am getting this error message on my iMac. Time Machine unable to complete backup. An error occurred while creating the back up folder. Any ideas on how to fix???

    See Pondini's TM FAQs

  • I got an error message saying "an error occurred while creating the backup folder". I have tried deleting the plist and am using the latest time capsule software and using OS Lion Any ideas what to do please?

    got an error message saying "an error occurred while creating the backup folder". I have tried deleting the plist and am using the latest time capsule software and using OS Lion Any ideas what to do please?

    See #C10 in Time Machine - Troubleshooting.

  • HT3275 The error message I get with Time Machine is 'Unable to complete backup. An error occurred while creating the backup folder.' Any idea how I solve this problem?

    I am a little perplexed. The Time Machine does seem to be backing up my data but I continually get the following message displayed on my screen 'Unable to complete backup. An error occurred while creating the backup folder.' I am using a WD My Passport for Mac portable hard disk drive.

    Hi Peter,
    http://pondini.org/TM/C10.html

  • HT3275 The message I get recently and often is "Time Machine couldn't complete the backup to "LaCie TmMachn". Unable to complete backup. An error occurred while creating backup folder." Anyone that can help me?

    The message I get recently and often is "Time machine couldn't complet the backup to "LaC TmMachn". Unable to complete backup. An error occurred while creating the backup folder."

    Welcome to the Apple Support Communities
    See > http://pondini.org/TM/C10.html

  • Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

    I have tried all the resets, the firmware is the latest version, the green light is on.
    But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
    Any ideas?

    Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
    Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
    Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
    Reset the TC again.. sorry.. !! You're welcome ... done.
    Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
    You need to open the network preferences to find out. Yep - that's good ...
    ****** I then reconnect the TC WAN to the router - is this right?
    And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
    The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
    Then open the airport utility and you should be able to setup the TC.
    Do as little setup as possible and then run the TM backup and see how it goes.
    I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
    So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
    I named network RFG, named device RFGTC.  RFG network shown as IP 192.168.0.72
    Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
    I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link.  All are effectively connected to the BT Homehub - is there a conflict there?
    Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
    And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • An error occurred while creating a Page Server subprocess.

    I am using XI R2 SP5 on solaris.
    When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
    An error occurred while creating a Page Server subprocess.
    I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
    Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

    checked this SAP Note?
    1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
    Symptom
    When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
    "The Page Server is unable to create a child process"
    In the syslogs, you see the following error messages:
    "An error occurred while creating a Page Server subprocess."
    "The function PEOpenEngineEx failed. Reason: Report engine not opened."
    "Internal error for dll procreport."
    "Unable to load dll procreport."
    "Internal Job Server error."
    Cause
    The following file in the MainWin registry has become corrupt:
    bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
    This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
    Resolution
    Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

  • Time Machine warning: An error occured while creating a backup folder. What to do???

    Time Machine warning: An error occured while creating a backup folder. What to do???

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the text field.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • " An error occurred while creating the backup directory"

    Hi all,
    I recently bought an external drive because my mac was just about full.
    It's made by Lacie, model # P'9231... (1TB)
    I got it working, for moving and accessing files (I moved the iPhoto library-and that works fine)...  but...
    I told Time Machine to use it as the backup disk, but TM often tells be that the backup failed. I get this message;
    "Backup failed.  An error occurred while creating the backup directory"
    I don't understand this.  I did some experiments with Time Machine, and I've been able to restore some things, but I still keep getting this message.
    I don't know what is getting backed up and what is not..
    Did I do something wrong? Or, more importantly, what is the fix?
    Any advice is much appreciated.  Thanks in advance,
    Jim

    I'm having the same problem.  I just got the drive Saturday at the local Apple store.
    Have you figured it out?

Maybe you are looking for