Error occured while deserializing simple transformation program
Hi,
In the SOA Manager( In the CRM PRD system ), when I check the payload trace, the Request is blank and in the Response I find that there are few exceptions
1) CX_SY_CONVERSION_DATA_LOSS: XSLT exception - An error occured while deserializing the simple transformation
Data loss occured when converting ...
How do I know what was the input provided by the user and how to I use the transformation generated and identify the cause of the problem. in the PRD system What is the use of XSLT transformation?
Thanks,
Chakram Govindarajan
Hello Chakram,
We are facing the same issue , but in GRC & Remedy Integration.
Will you please let me know what did you do to resolve this issue if it has got resolved ??
Thanks in advance.
Regards,
Victor
Similar Messages
-
Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
RaviHello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi. -
I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
My apple TV works fine with my I-Phone 4s. But one program from one of the application I downloaded from the app store dont work. When I load that a message comes "an error occured while loading this program" This is only for one program all other most of the time works good. Any one knows why ?
Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Error occured while transforming payload using XSL
Hi,
When i deployed the SOAOrderBooking BPEL process, an instance created successfully in BPEL console (after submitting orders successfully), but when i clicked the instance window in ESB control to confirm that the service instance successfully received the order and initiated the SOAOrderBooking BPEL process, i can see 2 instances there OrderBookingESB and FulfillmentESB, so now the issue is the FulfillmentESB instance created with some error which is given below:
Error Message
Error occured while transforming payload using XSL "esb:///ESB_Projects/SOAEssentials_FulfillmentESB/PurchaseOrder_To_FedexshipmentCollection.xsl". Reason : Could not load XSL transform into the cache for XSL/XSLT "esb:///ESB_Projects/SOAEssentials_FulfillmentESB/PurchaseOrder_To_FedexshipmentCollection.xsl"! Reason : org.apache.slide.structure.ObjectNotFoundException: No object found at /files/ESB_Projects/SOAEssentials_FulfillmentESB!
at oracle.tip.esb.server.service.EsbRouterSubscription.transform(Unknown Source)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.........
Besides after submitting orders, when i clicked "View Current Orders", iam getting 500 internal server error: Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
If anyone know how to solve this issue plz let me know...
Thanks in advance....
- Indhu
Message was edited by:
IndhuLooks like you might not have imported the xsl within the project. When you import the files from outside your project you have to have "Add to project" checked.
Check if you see the xsl file within the project folder.
DP -
A conversion error occurred while the program -- display data on the screen
HI all,
Iam getting a dump error described below:
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. " Ztable_MM_MRQ "
Screen number............ 0100
Screen field............. "WA_PO_ITEMS-MENGE"
Error text............... "FX015: Sign lost."
Further data:
Give us step by step procedure to rectify the same with T.codes
Thanks
Regards
SirajRaymond
please give details in se51 where i have to put a "V" to allow negative amounts
whether it is in Text or I/O templates
name type of screen element Text or I/O field
WA_PO_ITEMS-MENGE Text PO_quantity__
regards -
Signed in, hit convert, program error says "error occurred while signing in"
signed in, hit convert, program error says "error occurred while signing in"
I just purchased the program this evening, and the same thing happened to me. So I shut down Reader and reopened it, checked for updates as instructed, and got a message that I have the latest version, no updates.
But after signing in again and clicking "Convert", my file converted just fine.
Maybe try signing out, shutting down program, and starting it up again? -
Error occur while trying to save a program in SE38(ROLLBACK_IN_POSTING)
Hi expert,
Error occur while trying to save a program in SE38.
ROLLBACK_IN_POSTING
Error analysis in st22
Calling a ROLLBACK WORK within an update is not allowed because
the function modules triggered in a Logical Unit of Work cannot
then be processed correctly.
sm21 log
SM13 R0 U Update requests were deleted (VBKEY = 4F4CFB6B90330AA7E1000000C0A80A07, VBUSR = OSEABAP1)
AB 0 Run-time error "ROLLBACK_IN_POSTING" occurred
AB 1 > Short dump "120301 121252 osedevqa ORD00 " generated
D0 1 Transaction Canceled 00 671 ( ROLLBACK_IN_POSTING 20120301121252osedevqa_ORD_00 OSEABAP1 120 )
R6 5 Update terminated
R6 6 > Update key: 4F4CFBA190330AA7E1000000C0A80A07
R6 7 > Update module: RS_NEW_PROGRAM_INDEX
Regards,
vivek
Edited by: vivek pokhariyal on Mar 1, 2012 8:43 AMThere is plenty of Notes regarding this error in SAP Marketplace. Did you look at them?...
Posting Basic questions without research is not allowed. Read the "Rules of Engagement"
Regards
Juan -
Hi,
I am using an administrator account to change the permission setting in the c:\ drive of my w2k8 x64 server.
Every time I try edit a permission (read, write, read & execute..... anything), I got a whole wack of paremeter errors (this happen to all account i used):
First, I would get the message
An error occurred while applying security information to: c:\boot
and I click continue, a new message would appares say
An error occurred while applying security information to: c:\bootmgr, and so on, until c:\windows.
I tried to turn off/on UAC but this doesn't help.
I need your help on soving this problem.
ThanksDisclaimer: You should not follow any of these instructions. They will cause you harm in every conceivable way. Don’t continue I say again … go read a book, see a movie, hit the gym, spend time with family and friends but by all means don’t read any further and certainly don’t follow any of these instructions.
Windows 7
Are you getting these errors?
“an error occurred while applying security information to: “filename”
“access is denied”
“you currently don’t have access to this folder”
File Folder Lock On Lock Off Icon
Note: you may want to create a “test folder” and test these instructions so you can get familiar with them. Also if you have lots of folders, subfolders and files your computer may take awhile to make all the changes. Just sit back and relax while it crunches away ;-)
If you are going to want access to all your folders and files start with the topmost folder as we will be making a selection that will apply the setting to all subfolders and files. Ill point this out when we get to it later. You may only want to do this to files that you use directly and not mess with system files etc. These instructions can help you with files already on your system or files that you are bringing in from an external drive or other source.
Here we go!
First we will be taking “ownership” of your files and folders (instructions 1-18) then we will be granting you the proper “permissions” (instructions 19-) ; these are two key principles you need to be aware of to properly manage your files. The good new is that once you make these changes they will persist and then you will be your local file guru!
Instructions:
TAKING OWNERSHIP (1-18):
1) Turn on your computer and log into windows with administrator privileges. If you are the only user of your computer then chances are the normal account you log in with has these privileges. If someone else set your computer up for you they may have the administrator privileges and you should check with them.
2) Right click on your top most folder and select properties.
3) Select the security tab at the top.
4) Don’t answer any questions that pop up just click the “advanced button” on the bottom right.
5) Click the owner tab.
6) Now click edit.
7) Then click on “you”, that is, the account that you just logged into your computer with, also known as your “username”.
8) Check the box “replace owner on subcontainers and objects”. I promised to point this out earlier. If you don’t check this box then any changes you make WON’T apply to the subfolders and files.
9) Click apply.
10) A dialog box should pop up with a message “You do not have…”
11) you should select “yes”
12) Another dialog box should pop up with a message “If you have just taken ownership …”
13) Select “OK”
14) Click “OK” again to close the “advanced security settings” screen were making changes to.
15) The next box should now show you as the current owner
16) Click “OK”
17) Click “OK” again to close the properties tab
18) We are now back at your folder listing. Congratulations! You are now the proud owner of your files! Take good care of them
SETTING PERMISSIONS
19) OK, now let’s get started setting your permissions. Right click your topmost folder again and select properties.
20) Select the security tab at the top.
21) OPTIONAL: You will likely see a list of “group or user names” that have various permissions. You don’t need to make any changes to these. If you want to remove some then click edit, highlight a “group or user” and hit remove.
22) If you are not already listed we need to add “you” to the list, again by “you” I mean the name of the account that you logged into your computer with to start this session when you logged into windows, in other words your “username”. Click “add” then type JUST your username that comes up when you first log in to your computer by entering your username and password. You shouldn’t’ include any pathnames JUST the username.
23) Click on “check names”; windows should find you.
24) Click “OK”.
25) Now you should be back at the “Permission/security” box
26) Check the “full control” box under “allow”. Scroll down and you will see you can do everything now. Hey, stop obsessing …the “special permissions” tab is OK unchecked… It is there if you were to want to fine tune. You took full control already what else do you want You are behind the driver’s wheel my friend, enjoy!
27) Select “apply”.
28) Select “OK”
29) Select “OK”
30) OPTIONAL (THE little LOCK): did a “lock” appear. It might have if you removed all other “group or user names” back in step 21. The lock just means that YOU alone have access to these files. It is not bad in fact it is an easy way to see that the folder is unshared in every way. If you want to experiment with the “lock” try this: Right click the folder again but this time DON’T select properties instead a little higher up on the list select “share with”: see the lock by “nobody”. You aren’t sharing with anybody and so there is a lock to signify that. To experiment you can click “specific people” type “guest” click “add” then click to highlight the new “guest row” leave the “read” box checked and click “share”. You are now sharing those folders or files with “YOU” and anyone that logs onto your machine as a “Guest” and the lock has disappeared. To bring the lock back: right click the folder, click “share”, click “nobody”. LOCK ON / LOCK OFF …hey your Kung Fu is pretty good! For further experimenting with the lock try this but first a security warning: (SECURITY WARNING: changing these sharing settings may share your files with anyone going through your router/homegroup. This may compromise your security. Always protect access to your wireless router by using passwords to get onto the wireless network and also setting router passwords to prevent access to the router itself). If you set up a “homegroup” on your network and select this choice the “lock” will disappear and your files can now be shared with anyone logged into your network.
• There could be multiple reasons for “access denied errors”. A nasty one is that the file/pathname is too long (>260 characters in Windows 7). You should start to shorten the root folder names as much as possible and bring down the longest path name to well under 260 characters (also including into that calculation the path where you will be copying the files).
Enjoy!
George
This is a draft document; please send me an email to let me know how it went for you and to help improve the document.
[email protected] -
Simple transformation program debugging
hi ,
can any boby guide me how can we debug a simple transformation program which is used for xml to abap conversion .Hi,
have a look on this.
REPORT YMS_XMLTOSAP.
TYPE-POOLS: IXML.
TYPES: BEGIN OF T_XML_LINE,
DATA(256) TYPE X,
END OF T_XML_LINE.
DATA: L_IXML TYPE REF TO IF_IXML,
L_STREAMFACTORY TYPE REF TO IF_IXML_STREAM_FACTORY,
L_PARSER TYPE REF TO IF_IXML_PARSER,
L_ISTREAM TYPE REF TO IF_IXML_ISTREAM,
L_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
L_NODE TYPE REF TO IF_IXML_NODE,
L_XMLDATA TYPE STRING.
DATA: L_ELEM TYPE REF TO IF_IXML_ELEMENT,
L_ROOT_NODE TYPE REF TO IF_IXML_NODE,
L_NEXT_NODE TYPE REF TO IF_IXML_NODE,
L_NAME TYPE STRING,
L_ITERATOR TYPE REF TO IF_IXML_NODE_ITERATOR.
DATA: L_XML_TABLE TYPE TABLE OF T_XML_LINE,
L_XML_LINE TYPE T_XML_LINE,
L_XML_TABLE_SIZE TYPE I.
DATA: L_FILENAME TYPE STRING.
PARAMETERS: PA_FILE TYPE CHAR1024 DEFAULT 'c:\temp\orders_dtd.xml'.
* Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: PA_VAL TYPE CHAR1 AS CHECKBOX.
START-OF-SELECTION.
* Creating the main iXML factory
L_IXML = CL_IXML=>CREATE( ).
* Creating a stream factory
L_STREAMFACTORY = L_IXML->CREATE_STREAM_FACTORY( ).
PERFORM GET_XML_TABLE CHANGING L_XML_TABLE_SIZE L_XML_TABLE.
* wrap the table containing the file into a stream
L_ISTREAM = L_STREAMFACTORY->CREATE_ISTREAM_ITABLE( TABLE = L_XML_TABLE
SIZE = L_XML_TABLE_SIZE ).
* Creating a document
L_DOCUMENT = L_IXML->CREATE_DOCUMENT( ).
* Create a Parser
L_PARSER = L_IXML->CREATE_PARSER( STREAM_FACTORY = L_STREAMFACTORY
ISTREAM = L_ISTREAM
DOCUMENT = L_DOCUMENT ).
* Validate a document
IF PA_VAL EQ 'X'.
L_PARSER->SET_VALIDATING( MODE = IF_IXML_PARSER=>CO_VALIDATE ).
ENDIF.
* Parse the stream
IF L_PARSER->PARSE( ) NE 0.
IF L_PARSER->NUM_ERRORS( ) NE 0.
DATA: PARSEERROR TYPE REF TO IF_IXML_PARSE_ERROR,
STR TYPE STRING,
I TYPE I,
COUNT TYPE I,
INDEX TYPE I.
COUNT = L_PARSER->NUM_ERRORS( ).
WRITE: COUNT, ' parse errors have occured:'.
INDEX = 0.
WHILE INDEX < COUNT.
PARSEERROR = L_PARSER->GET_ERROR( INDEX = INDEX ).
I = PARSEERROR->GET_LINE( ).
WRITE: 'line: ', I.
I = PARSEERROR->GET_COLUMN( ).
WRITE: 'column: ', I.
STR = PARSEERROR->GET_REASON( ).
WRITE: STR.
INDEX = INDEX + 1.
ENDWHILE.
ENDIF.
ENDIF.
* Process the document
IF L_PARSER->IS_DOM_GENERATING( ) EQ 'X'.
PERFORM PROCESS_DOM USING L_DOCUMENT.
ENDIF.
*& Form get_xml_table
FORM GET_XML_TABLE CHANGING L_XML_TABLE_SIZE TYPE I
L_XML_TABLE TYPE STANDARD TABLE.
* Local variable declaration
DATA: L_LEN TYPE I,
L_LEN2 TYPE I,
L_TAB TYPE TSFIXML,
L_CONTENT TYPE STRING,
L_STR1 TYPE STRING,
C_CONV TYPE REF TO CL_ABAP_CONV_IN_CE,
L_ITAB TYPE TABLE OF STRING.
L_FILENAME = PA_FILE.
* upload a file from the client's workstation
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
EXPORTING
FILENAME = L_FILENAME
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = L_XML_TABLE_SIZE
CHANGING
DATA_TAB = L_XML_TABLE
EXCEPTIONS
OTHERS = 19.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Writing the XML document to the screen
CLEAR L_STR1.
LOOP AT L_XML_TABLE INTO L_XML_LINE.
C_CONV = CL_ABAP_CONV_IN_CE=>CREATE( INPUT = L_XML_LINE-DATA REPLACEMENT = SPACE ).
C_CONV->READ( IMPORTING DATA = L_CONTENT LEN = L_LEN ).
CONCATENATE L_STR1 L_CONTENT INTO L_STR1.
ENDLOOP.
L_STR1 = L_STR1+0(L_XML_TABLE_SIZE).
SPLIT L_STR1 AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE L_ITAB.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT L_ITAB INTO L_STR1.
REPLACE ALL OCCURRENCES OF CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB IN
L_STR1 WITH SPACE.
WRITE: / L_STR1.
ENDLOOP.
WRITE: /.
ENDFORM. "get_xml_table
*& Form process_dom
FORM PROCESS_DOM USING DOCUMENT TYPE REF TO IF_IXML_DOCUMENT.
DATA: NODE TYPE REF TO IF_IXML_NODE,
ITERATOR TYPE REF TO IF_IXML_NODE_ITERATOR,
NODEMAP TYPE REF TO IF_IXML_NAMED_NODE_MAP,
ATTR TYPE REF TO IF_IXML_NODE,
NAME TYPE STRING,
PREFIX TYPE STRING,
VALUE TYPE STRING,
INDENT TYPE I,
COUNT TYPE I,
INDEX TYPE I.
NODE ?= DOCUMENT.
CHECK NOT NODE IS INITIAL.
ULINE.
WRITE: /.
WRITE: /' DOM-TREE'.
WRITE: /.
IF NODE IS INITIAL. EXIT. ENDIF.
* create a node iterator
ITERATOR = NODE->CREATE_ITERATOR( ).
* get current node
NODE = ITERATOR->GET_NEXT( ).
* loop over all nodes
WHILE NOT NODE IS INITIAL.
INDENT = NODE->GET_HEIGHT( ) * 2.
INDENT = INDENT + 20.
CASE NODE->GET_TYPE( ).
WHEN IF_IXML_NODE=>CO_NODE_ELEMENT.
* element node
NAME = NODE->GET_NAME( ).
NODEMAP = NODE->GET_ATTRIBUTES( ).
WRITE: / 'ELEMENT :'.
WRITE: AT INDENT NAME COLOR COL_POSITIVE INVERSE.
IF NOT NODEMAP IS INITIAL.
* attributes
COUNT = NODEMAP->GET_LENGTH( ).
DO COUNT TIMES.
INDEX = SY-INDEX - 1.
ATTR = NODEMAP->GET_ITEM( INDEX ).
NAME = ATTR->GET_NAME( ).
PREFIX = ATTR->GET_NAMESPACE_PREFIX( ).
VALUE = ATTR->GET_VALUE( ).
WRITE: / 'ATTRIBUTE:'.
WRITE: AT INDENT NAME COLOR COL_HEADING INVERSE, '=',
VALUE COLOR COL_TOTAL INVERSE.
ENDDO.
ENDIF.
WHEN IF_IXML_NODE=>CO_NODE_TEXT OR
IF_IXML_NODE=>CO_NODE_CDATA_SECTION.
* text node
VALUE = NODE->GET_VALUE( ).
WRITE: / 'VALUE :'.
WRITE: AT INDENT VALUE COLOR COL_GROUP INVERSE.
ENDCASE.
* advance to next node
NODE = ITERATOR->GET_NEXT( ).
ENDWHILE.
ENDFORM. "process_dom
Thanks,
Sankar M -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Hi,
I have been trying to get a very simple WebJob developed and deployed onto Azure with little to no luck. I have a MVC Website which has a common project which handles my Data Access Layer with Entity Framework. I have created a WebJob project
using Visual Studio and added the following lines of code to the Manual Trigger Function
[NoAutomaticTrigger]
public static void ManualTrigger(TextWriter log, int value, [Queue("queue")] out string message)
RitualDBEntities db = new RitualDBEntities();
log.WriteLine("Function is invoked with value={0}", value);
List<Location> locations = db.Locations.ToList();
string msg = string.Empty;
foreach (Location location in locations)
msg += location.Name;
message = msg;
log.WriteLine("Following message will be written on the Queue={0}", message);
In my app.config of my WebJob i have the following connection strings:
<add name="RitualDBEntities" connectionString="metadata=res://*/RitualDBEntities.csdl|res://*/RitualDBEntities.ssdl|res://*/RitualDBEntities.msl;provider=System.Data.SqlClient;provider connection string="data source=ritual-pc\sqlexpress;initial catalog=RitualDB;integrated security=True;persist security info=False;MultipleActiveResultSets=True;App=EntityFramework"" providerName="System.Data.EntityClient" />
<add name="RitualContext" connectionString="Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=RitualDB;Data Source=ritual-pc\sqlexpress" providerName="System.Data.SqlClient" />
<add name="AzureWebJobsDashboard" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****"/>
<add name="AzureWebJobsStorage" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****" />
When i test locally (F5 Debugging) the webjob runs successfully and does the loop of the objects returned from the database. When i deploy this Azure the WebJob fails with the following error:
[03/29/2015 22:07:39 > 6ca05b: SYS INFO] Status changed to Initializing
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Run script 'Ritual.WebJobs.Members.exe' with script host - 'WindowsScriptHost'
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Status changed to Running
[03/29/2015 22:07:44 > 6ca05b: INFO] Found the following functions:
[03/29/2015 22:07:44 > 6ca05b: INFO] Ritual.WebJobs.Members.Functions.ManualTrigger
[03/29/2015 22:07:44 > 6ca05b: INFO] Executing: 'Functions.ManualTrigger' because This was function was programmatically called via the host APIs.
[03/29/2015 22:08:01 > 6ca05b: INFO] Function had errors. See Azure WebJobs SDK dashboard for details. Instance id is e99d7205-3ca0-4674-9414-f0381d5c2316
[03/29/2015 22:08:01 > 6ca05b: ERR ]
[03/29/2015 22:08:01 > 6ca05b: ERR ] Unhandled Exception: System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.<Open>b__36(DbConnection t, DbConnectionInterceptionContext c)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.InternalDispatcher`1.Dispatch[TTarget,TInterceptionContext](TTarget target, Action`2 operation, TInterceptionContext interceptionContext, Action`3 executing, Action`3 executed)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.Open(DbConnection connection, DbInterceptionContext interceptionContext)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.<Open>b__2()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute(Action operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of inner exception stack trace ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection(Boolean shouldMonitorTransactions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClass7.<GetResults>b__5()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<System.Collections.Generic.IEnumerable<T>.GetEnumerator>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Internal.LazyEnumerator`1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Functions.ManualTrigger(TextWriter log, Int32 value, String& message)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at lambda_method(Closure , Object[] )
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.VoidInvoker.InvokeAsync(Object[] arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithWatchersAsync>d__23.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithOutputLogsAsync>d__1c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<TryExecuteAsync>d__1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.ExceptionDispatchInfoDelayedException.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.<CallAsyncCore>d__7.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.Call(MethodInfo method, Object arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Program.Main()
[03/29/2015 22:08:01 > 6ca05b: SYS INFO] Status changed to Failed
[03/29/2015 22:08:01 > 6ca05b: SYS ERR ] Job failed due to exit code -532462766
If i remove any of my database code and use just the basic Stub code my webjob will run successfully so i know that my connection strings (outside of the DB ones) are correct. My MVC web application also runs perfectly using the same connection strings
in Azure so i also know that they have also been configured.
I am now lost and need some guidance, so if someone is able to assist me that would be much appreciated.
Thanks
Ritual.Can you try to log the connection string you are using in both cases to make sure they are the same?
Also can you share your site name, either directly or indirectly?
This will help us investigate.
Thanks,
Amit -
What does "Error 10" mean? "An error occurred while loading your project. 10"
Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digiThanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet. -
Error occurred while connecting to the FTP server: java.lang.NullPointerExc
Hello Experts,
I have a scenario wherein i have to send file from FTP to application server of ECC.
I don't want to do any mapping and transformation; Just need to transfer the file as it is.
I have achieved this using Integrated scenario.
But in the sender communication channel i get an error saying "Error occurred while connecting to the FTP server "*.*.*.*:*": java.lang.NullPointerException"
I have checked all my FTP parameters many times and everything is correct.
Thanks,
Lalit Mohan Gupta.Hi,
You can check the connect test of FTP in either of the below ways.
1. Use FTP Dos command (i.e go the run and type ftp..) and from there try to login to the source FTP server by using FTP Commands. If you are able to connect to the same then ask your basis to check the connectivity test from PI server.
If you are not able to connect check the error you are getting and post the same if you are not able to resolve the same.
2. There is Program from SAP which need to be deployed into Server and after that you can test the ftp connection by yourselves from PI server. Search in sap support for Connection Test SAP Note..
HTH
Rajesh -
An error occurred while scanning for security updates. (0x80004003)
Has anyone seen this error: An error occurred while scanning for security updates. (0x80004003)?
This error occurs when I run the MBSA tool either locally or remote against a workstation. I also thought that the firewall may be the issue, it is not. I ran the MBSA tool on the WSUS replica and WSUS upstream server and received the same results. I
have been running the MBSA tool and have not run into this probem before. I am running SolarWinds PatchManager on the upstream WSUS server and have recently configured the upstream and downstream servers to communicate, I imported
the certifcate from the WSUS upstream to the replica and noticed that after this we started having issues with the MBSA scans. Not sure if this is related but it is the only change between MBSA working and not working. P.S. The scan does
work when we use the offline scenario instead of pointing to the WSUS server.
Any help would be appreciated.
Thanks
bcYes, the log file was too large I have pasted the 2nd half after running MBSA on the server (the setting is to scan using Windows Server Update Services (WSUS) only.) This second half of the windowslog file shows errors after running MBSA
MBSA scan time was 9:44 PM
2014-07-31
19:38:35:487 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:44:14:497 216 2344
Report Uploading 4 events using cached cookie, reporting URL =
http://eus1:8530/ReportingWebService/ReportingWebService.asmx
2014-07-31
19:44:14:555 216 2344
PT WARNING: ReportEventBatch failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-07-31
19:44:14:555 216 2344
PT WARNING: SOAP Fault: 0x00012c
2014-07-31
19:44:14:555 216 2344
PT WARNING:
faultstring:Fault occurred
2014-07-31
19:44:14:555 216 2344
PT WARNING:
ErrorCode:ConfigChanged(2)
2014-07-31
19:44:14:555 216 2344
PT WARNING:
Message:(null)
2014-07-31
19:44:14:555 216 2344
PT WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/ReportEventBatch"
2014-07-31
19:44:14:555 216 2344
PT WARNING:
ID:2b9836c5-3159-494b-ae27-72559d089586
2014-07-31
19:44:14:555 216 2344
Report WARNING: Reporter failed to upload events with hr = 8024400d.
2014-07-31
19:45:57:201 9128 12a8
Misc ===========
Logging initialized (build: 7.6.7600.256, tz: -0400)
===========
2014-07-31
19:45:57:201 9128 12a8
Misc = Process: C:\Program Files\Microsoft Baseline Security Analyzer 2\mbsa.exe
2014-07-31
19:45:57:201 9128 12a8
Misc = Module: C:\Windows\system32\wuapi.dll
2014-07-31
19:45:57:200 9128 12a8
COMAPI -------------
2014-07-31
19:45:57:201 9128 12a8
COMAPI -- START -- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:45:57:202 9128 12a8
COMAPI ---------
2014-07-31
19:45:57:218 216 2344
Agent *************
2014-07-31
19:45:57:218 9128 12a8
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:45:57:218 216 2344
Agent ** START ** Agent: Finding updates [CallerId = MBSA]
2014-07-31
19:45:57:218 216 2344
Agent *********
2014-07-31
19:45:57:218 216 2344
Agent * Include potentially superseded updates
2014-07-31
19:45:57:218 216 2344
Agent * Online = Yes; Ignore download priority = No
2014-07-31
19:45:57:218 216 2344
Agent * Criteria = "IsInstalled=0 or
IsInstalled=1"
2014-07-31
19:45:57:218 216 2344
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-31
19:45:57:218 216 2344
Agent * Search Scope = {Machine}
2014-07-31
19:45:58:410 216 2344
PT +++++++++++ PT: Synchronizing server updates
+++++++++++
2014-07-31
19:45:58:410 216 2344
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://eus1:8530/ClientWebService/client.asmx
2014-07-31
19:46:00:453 216 2344
PT WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-07-31
19:46:00:453 216 2344
PT WARNING: SOAP Fault: 0x00012c
2014-07-31
19:46:00:453 216 2344
PT WARNING:
faultstring:Fault occurred
2014-07-31
19:46:00:453 216 2344
PT WARNING:
ErrorCode:ConfigChanged(2)
2014-07-31
19:46:00:453 216 2344
PT WARNING:
Message:(null)
2014-07-31
19:46:00:453 216 2344
PT WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
2014-07-31
19:46:00:453 216 2344
PT WARNING:
ID:e9b0d06e-d0c8-443f-abc9-512bc0f2cfa1
2014-07-31
19:46:00:481 216 2344
PT Initializing simple targeting cookie,
clientId = e651f142-bc0f-467d-b416-d344215f5c0a, target group = EMCC Servers, DNS name = elf1.monarch.com
2014-07-31
19:46:00:481 216 2344
PT Server URL =
http://eus1:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-07-31
19:46:18:451 216 2344
PT +++++++++++
PT: Synchronizing extended update info +++++++++++
2014-07-31
19:46:18:451 216 2344
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://eus1:8530/ClientWebService/client.asmx
2014-07-31
19:46:18:893 216 2344
Agent * Added update {92AEAB02-F8FC-4527-B285-50FDC8EF3F85}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {2212D902-7C3B-408E-96A3-ECE4D00BFAE6}.101 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {490BE004-BC5C-4EEF-AC82-769542FC3A2D}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {568C1005-5178-4C13-8486-18E2C5AF4834}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216 2344
Agent Update {D9F49D05-AC6D-4A2A-8150-D2B4B730DEED}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216 2344
Agent * Added update {74844E07-2F55-40D4-9E16-E17A2815FEBE}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {3C72A908-F3CD-413D-B2BF-ECB68D24B6FE}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {50990D0B-4795-4830-9C3A-753485B2D433}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {9DB82D0B-5611-4BC1-A4B8-432FE1A3CC43}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {7BB7B30C-351D-4F8C-ABE4-5F7965635A03}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {AEF6280F-8C4D-4804-9913-407582227E75}.202 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {16BB6A11-B540-4486-AB13-F3B9789E90B5}.105 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {1B127611-D28E-4167-A1DC-243A51BC528F}.203 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {2F6F2013-2990-4FA6-8AB9-CA59DCA4E62D}.202 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {21732D13-3D34-4DD7-B663-32F2A1631EA9}.105 to search result
2014-07-31
19:46:18:893 216 2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216 2344
Agent Update {E879EE15-340D-442C-B8A4-CF91D18C1B6B}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216 2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216 2344
Agent Update {99FEC317-44CD-40B4-B67E-94C840510983}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216 2344
Agent * Added update {8096C018-252D-4C32-BC9E-F33AC67ECFF1}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {ECCC4D19-3032-4C82-91AB-A31560B13F80}.205 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {BB49CC19-8847-4986-AA93-5E905421E55A}.103 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {023BB023-490F-4DF3-BCAA-9521EE8B5847}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {9676C624-58CB-4A30-B7B3-1D013CF3DBBC}.201 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {1BB3DE24-0D76-4D59-9B9E-556722BFE852}.101 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {F4695A25-0D22-4E3B-9BA9-9BBC62198C28}.103 to search result
2014-07-31
19:46:18:893 216 2344
Agent * Added update {11152F27-ACCA-4438-B21D-A0B61480D33B}.101 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {308DE327-7354-4481-9981-DEA0FC61925E}.101 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {16E9C62D-05B2-4E14-BFB0-CF55EDBD4F61}.106 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {C750962E-9D5E-45CE-9967-AE2D67115966}.202 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {9F7D6930-6816-423A-AF3C-C83ADFA7F612}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {497BCC31-ACF7-46E2-B664-C79FD2D39F8B}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:894 216 2344
Agent Update {E00B2634-BEF9-4C32-B2BF-DEAF7D7221E4}.102 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:894 216 2344
Agent * Added update {7738E837-B152-487B-8527-CD3A9C0E43E3}.101 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {39757C3A-7ABE-4418-8B2A-C7EA7D88B36A}.202 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {A8968B3A-7FB5-4089-888F-4CDB14055DE9}.102 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {E6ED643C-8611-4453-A723-9847B7BF60EB}.103 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {C499223D-2F22-4626-BBE5-F5A35E7A5854}.204 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {48BEEF41-9D2D-4E72-9A61-59F98B12C07A}.204 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {2661BD46-2980-4FCF-A062-B3A0C7820663}.102 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {DC548E48-407C-48E1-ACA4-6B4C0DF14E69}.102 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {ED981249-8D8F-42A1-87DB-0AB5C07430B2}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {18FEE64A-1E7F-4932-8158-E8AB241F3A1A}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {3732354D-3DAE-4E71-B82C-61A12C300F72}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {3061954E-EDAA-4625-837C-CE768D68927D}.204 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {78F92451-801A-40F5-9582-CB8D1CA993BE}.202 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {ADA7CF51-66B0-4A00-B37B-68D569D6FF8B}.102 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {345B0353-DFC6-48CC-A6B6-A490CA26B503}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {1330DB53-75FF-4D87-9270-6A5449A67AD7}.101 to search result
2014-07-31
19:46:18:894 216 2344
Agent * Added update {E35E5957-A5A9-4576-9D54-314A34C47C53}.201 to search result
2014-07-31
19:46:18:894 216 2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:894 216 2344
Agent Update {DC17765A-6814-47AD-9F54-5BFBCBF95FB0}.101 is not a valid bundle. Not
2014-07-31
19:46:18:895 216 2344
Agent * Added update {CEFF8CA0-08DB-41D0-B825-FCC2CEBAF8B4}.108 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {2FECFFA0-44C8-4719-8F72-EC7BD8EDB793}.1 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {2BDE2BA3-EF93-49C6-A3C6-A806835A680F}.200 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {0B8586A5-EEB6-4DC0-BCDA-2635C7E12B55}.102 to search result
2014-07-31
19:46:18:895 216 2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:895 216 2344
Agent Update {A6BD61A7-CC63-4068-8510-AA5268FB03E8}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:895 216 2344
Agent * Added update {4C0BA6A7-A8F0-417E-B9DA-906207429CE6}.204 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {CE9876A9-83BF-4EDC-8793-4CBD6F3A6C5A}.202 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {63A011AC-FF81-44B9-811C-BECE5DC6C34B}.101 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {4A0A69AD-4237-43E7-8FB9-5A814361EC76}.201 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {E17C01AE-BACC-4147-97AD-51A0708126D2}.102 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {CB1F1FAE-F738-49E7-AE3E-7A0C2308838B}.201 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {9696B7B0-FF6F-4AA6-B29C-E0200CB6EB79}.200 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {B58F24B1-58A0-4661-9882-0FF509712946}.102 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {E47BE4B1-5EF0-442F-995F-C000D5AFF062}.201 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {D68E0CB2-9501-405E-AF9C-156F352D6735}.107 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {09593FB3-C94B-4A07-84C4-2E60703AD644}.201 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201 to search result
2014-07-31
19:46:18:895 216 2344
Agent * Added update {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {B8315ACF-BF26-4C3A-979B-80A46D06697F}.200 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {013AF7D6-EC9F-4DEF-AE41-007D211F9FBC}.202 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {6E3C01DB-6977-46D2-A537-00F53DA0B3B3}.201 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {9842D9DB-8AE8-4F0B-B974-66787AEC8FBC}.201 to search result
2014-07-31
19:46:18:896 216 2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:896 216 2344
Agent Update {0C1447DC-904E-4DCE-B208-50741D1CC65C}.102 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:896 216 2344
Agent * Added update {DD7619DD-D6A6-4765-8406-612FD79583BA}.202 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {ABB0AFDD-4B0A-4C3E-8341-07EA3941C465}.201 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {B66BA1DF-4BC1-4145-859F-239C9F9BB5A0}.201 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {E2C928E1-BE92-4715-817D-FD6090F2FB07}.202 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {C16FDFFD-A0D3-49EB-A8EB-B8F5E21D52C3}.202 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {57260DFE-227C-45E3-9FFC-2FC77A67F95A}.104 to search result
2014-07-31
19:46:18:896 216 2344
Agent * Added update {5BCDA2FE-A3F5-42C9-91F0-823230942BD8}.204 to search result
2014-07-31
19:46:18:897 216 2344
Agent * Found 151 updates and 95 categories in search; evaluated appl. rules of 1327 out of 2207 deployed entities
2014-07-31
19:46:18:918 216 2344
Agent *********
2014-07-31
19:46:18:918 216 2344
Agent ** END
** Agent: Finding updates [CallerId = MBSA]
2014-07-31
19:46:18:918 216 2344
Agent *************
2014-07-31
19:46:18:932 216 2344
Report REPORT EVENT: {A427D5D8-F546-4FBB-9F5F-931DF1F46063}
2014-07-31 19:46:18:898-0400 1
147 101 {00000000-0000-0000-0000-000000000000}
0 0
MBSA Success
Software Synchronization Windows Update Client successfully detected 151 updates.
2014-07-31
19:46:18:932 216 2344
Report REPORT EVENT: {C8151494-E563-4AEB-B37F-14FD7864BF5D}
2014-07-31 19:46:18:898-0400 1
156 101 {00000000-0000-0000-0000-000000000000}
0 0
MBSA Success
Pre-Deployment Check Reporting client status.
2014-07-31
19:46:18:933 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:934 9128 2550
COMAPI >>-- RESUMED
-- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:46:18:934 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:934 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216 2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:19:032 9128 2550
COMAPI - Updates found = 151
2014-07-31
19:46:19:033 9128 2550
COMAPI ---------
2014-07-31
19:46:19:033 9128 2550
COMAPI -- END
-- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:46:19:033 9128 2550
COMAPI -------------
2014-07-31
19:46:23:918 216 2344
Report CWERReporter finishing event handling. (00000000)
bc
Maybe you are looking for
-
Remote Desktop - Cmd+D - save without closing question
I'm trying to write a script that will allow me to quit an application (SketchBookExpress) without saving changes. I'm having trouble with the syntax for the "Don't Save" (cmd+d). The script runs but stops at the on screen Save/Canel/Don't Save dia
-
How to enforce generating process of HL7
Hi, HL7 messages sent by SAP are obviously generated from some kind of table which contain the neccessary data. Generating theses messages is done immediately, but after a certain time. Is there a way to force IS-H to generate the messages and to wai
-
So frustrated. For 6 months I have been able to export my iMovie videos to YouTube, no problem. I have also been able to export my iMovie videos into QuickTime format so they can be viewed on PCs without having to import them into iDVD. Now all of a
-
Terrible audio quality in 5.1 mode
Hi ! This issue has been here for a while, but it's only now that I come to try to get a fix for it ... So, it's been a few version that I've noted that the sound was really bad when playing videos on youtube and came to realize that this was fixed w
-
White or Blank Screen Randomly Throughout Modules
Good Afternoon, We have an ongoing issue with white screens in captivate that appear randomly throughout testing once we load the training to our website. See Screenshot: http://euniversity.palmettohealth.org/whitespace/ The files are loaded to our