Error occured while executing Matlab script

Hello!
I want to run a Matlab script under LabVIEW, but there is always
a error message which says "Error occured while executing script".
Should I install Matlab on the same computer at first? if yes, do
I need to configure Matlab under LabVIEW?
Thanks!
Le

Yes No
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

Similar Messages

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • SCSM2012 Beta installation problem: An error occurred while executing a custom action:_PopulateUserRoles

    I'm installing the SCSM2012 Management Server
    component on a SQL dev box.  During the installation, the very last step (Import Management Packs) fails with this error:
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    I've already verified that the account I'm logged in with has SA access to the SQL database.  Windows 2008 R2 firewall is turned off.....
    Has anybody else run into this problem?

    I don't see anything indicative in the setup log.  The setup seems to get all the way to the part where it installs the management packs.  Then right after that is when the installation fails and it rolls back.
    From the setup log, towards the end:
    Property(S): ACTIONSUSER = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN = NT AUTHORITY
    Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
    Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
    Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
    Property(S): ProductToBeRegistered = 1
    MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
    MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
    MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
    1603.
    MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
    MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
    MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
    MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
    === Logging stopped: 11/7/2011  17:33:22 ===
    MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
    MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
    MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
    MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
    === Verbose logging stopped: 11/7/2011  17:33:23 ===

  • An error occurred while applying SQL script for the feature BackendStore.

    Hello,
    I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
    In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
    occurred while applying SQL script for the feature BackendStore."
    I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
    I executed the SQL Setup Wizard and upgraded any instance to 2012.
    Please guide.
    Thanks, Divyaprakash Koli

    Please check you have enough disk space for the disk where the folders are.
    Check view log for detailed log information.
    The following link is a similar thread for you to refer:
    http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
    Lisa Zheng
    TechNet Community Support

  • An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

    Hello
    i got this error in step2
    Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
    here is full summary
    > Bootstrap-CsComputer
    Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
    Checking prerequisites for bootstrapper...
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Host name: lync.rcc.local
    Disabling unused roles...
    Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
    Checking prerequisites for roles...
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Checking prerequisite PowerShell...prerequisite satisfied.
    Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
    Checking prerequisite SupportedServerOS...prerequisite satisfied.
    Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
    Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
    Checking prerequisite IIS...prerequisite satisfied.
    Checking prerequisite IIS7Features...prerequisite satisfied.
    Checking prerequisite ASPNet...prerequisite satisfied.
    Checking prerequisite KB2646886Installed...prerequisite satisfied.
    Checking prerequisite BranchCacheBlock...prerequisite satisfied.
    Checking prerequisite WCF...prerequisite satisfied.
    Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
    Checking prerequisite VCredist...prerequisite satisfied.
    Checking prerequisite SqlNativeClient...prerequisite satisfied.
    Checking prerequisite SqlClrTypes...prerequisite satisfied.
    Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
    Checking prerequisite UcmaRedist...prerequisite satisfied.
    Checking prerequisite WinFab...prerequisite satisfied.
    Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
    Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
    Checking prerequisite RewriteModule...prerequisite satisfied.
    Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
    Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
    Installing any collocated databases...
    Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
    An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
    what should i do?
    Please help me

    Hi,
    The issue may be related to disk read and write cache. Here is a similar case for your reference:
    http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

  • An error occured while running a script

    On launching Bridge, I an consistently receiving the following error.
    "There were problems loading a startup script the last time bridge was launched. Would you like to load them now?"
    Clicking [Yes] produces the following error:
    An error occurred while running a script. The script may not be compatible with this version of Bridge. Check for available updates by selecting the Updated command in the Help Menu
    Error in /Library/Application Support/Adobe/StartupScripts/AdobeStockPhotos.jsx
    Line 54: result = eval(script);
    Timeout while waiting for the engine
    I am running Bridge Mac CS2 - 1.0.4.6
    Adobe Stock Photos Update 1.0.8
    Power Mac G4 733 / OS X 10.3.9
    Updating either Bridge or Adobe Stock Photos does not correct the behavior.
    And curiously Stock Photos appears in the Favorites pane and appears to function.
    Any help ?
    Kurt Griffith.

    Good day,
    The Bridge v1.04.6 PS CS2 I am presently using has always come up with the Internet connection Error Message and none of my large imaging machines are connected nor will they ever be connected to the Internet.
    Is there a setting to do away with the Bridge trying to connect on my
    behalf ? I've spent a lot of time trying to 'fix' a problem that shouldn't have arisen.
    It wastes a lot of time trying to do something, which I do not want it doing.
    Thanks for any assistance you can provide in the matter. And please
    keep cranking out your wondrous though not totally controlable software, or so it seems.
    Best - Stephen Graham

  • XL reporter error occurred while executing report! Rows: 25203 Columns: 30

    An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
    One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

    Hello  pls
    follow below procedure
    start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
    regards
    Jenny

  • Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

    I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
    "An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
    Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
    Administrators
    CSAdministrator
    Domain Admins
    Domain Users
    Enterprise Admins
    Group Policy Creator Owners
    RTCComponentUniversalServices
    RTCHSUniversalServices
    RTCUniversalConfigReplicator
    RTCUniversalServerAdmins
    Schema Admins
    I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
    Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Found Parameter: Role Value master.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcxds validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcxds validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is detached.
    Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
    Attaching database failed because one of the files not found. The database will be created.
    State of database rtcxds is DbState_DoesNotExist.
    Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
    Clean installing database rtcxds.
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcshared validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcshared validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcshared.
    Reading database version for database rtcshared.
    Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
    Thanks and Regards,
    Thanh Le

    Thanks Lạc
    Phạm 2
    I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue. 
    If any one using KVM here is detail article 
    We just  give this option cache=‘writeback
    using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks 

  • An error occurred while executing a custom action:_PopulateUserRoles

    I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
    the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

    After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The  error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
    error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
    These are the steps (I had to create the DWORD 32 bit):
    Click Start, click Run, type regedit, and then click
    OK.
    Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    In the right pane, locate the ServicesPipeTimeout entry.
    Note  If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
    On the Edit menu, point to
    New, and then click DWORD Value.
    Type ServicesPipeTimeout, and then press ENTER.
    Right-click ServicesPipeTimeout, and then click Modify.
    Click Decimal, type 60000, and then click
    OK.
    This value represents the time in milliseconds before a service times out.
    Restart the computer.
    Hope this helps!
    BR,
    Robert
    Robert

  • ODBC error occurred while executing SQLExtendedFetch to retrieve the result

    Good morning everyone,
    I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
    "State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
    It's taking around 2,5 minutes to run, then it give that error message.
    Has anyone got any ideas on where I should get started?
    Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?

    Damon,
    you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
    regarding performance
    In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames.

  • Error occurred while Executing XL report

    Hi,
    I am getting the following error when i generate the XL report
    <b>An error occurred while Executing report!
    Description: Can't show non-modal form when modal form is displayed</b>
    Regards,
    Aravindhan.R

    Hi!
    You are probably editing a cell, if you exit the cell you are standing in (editing) the report should run properly

  • An error occurred while executing batch. Error message is: There is not enough space on the disk.

    Hello all,
    I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
    The error message is :
    An error occurred while executing batch. Error message is: There is not enough space on the disk.
    Who can tell me the reason and waht's the steps to solve this issue ?
    Really thanks.
    Thanks, Jed deng

    The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
    but I seem to recall that the files appear in you %TEMP% directory.
    I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
    Erland Sommarskog, SQL Server MVP, [email protected]
    Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
    - Chintak (My Blog)

  • Following error occurred while executing the application:

    I saw the RWB in message monitoring. Message monitoring is not working.
    I capture the scrpit.
    How can I ? Help me.....
    Stack trace for the above error message is:
    javax.servlet.ServletException: Error while executing the compilation process: [D:/usr/sap/NSC/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb_mdt/work/jsp_monitor_new1177580597765.java:1446: cannot resolve symbol
    symbol  : method getMaxMessageNumber ()
    location: class com.sap.aii.mdt.util.WebUtil
                   jspxth_hbj_listBoxItem_7.setValue(Integer.toString(webUtil.getMaxMessageNumber()));
                                                                                    ^
    D:/usr/sap/NSC/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb_mdt/work/jsp_monitor_new1177580597765.java:1466: cannot resolve symbol
    symbol  : method getMaxMessageNumber ()
    location: class com.sap.aii.mdt.util.WebUtil
                                          if (max == webUtil.getMaxMessageNumber()) {
                                                                                 ^
    2 errors
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:74)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at jsp_FC_Secure1177408659453._jspService(jsp_FC_Secure1177408659453.java:24)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

    Hi,
    From what i can tell youre problem is an a java function (user defined?) getMaxMessageNumber and more specific with a conversion from int to string.
    Hope this helps
    Dimitris Hagigeorgiou

  • Error occured while executing root.sh in ORACLE RAC 11gR2 Grid

    Environment:
    NO of Node: 2
    OS Flavor: RHEL 5.3 Tikanga Release 64-Bit
    Oracle Grid Version: 11gR2 64-Bit with OCFS2 Configuration
    DB RAM: 64 GB
    H/W Vendor: CISCO
    Shared Partition: /ORASYS (1 TB)
    We are trying to install 11gR2 RAC on RHEL 5.3 (64-Bit) box. After successful installation of Gird Software from GUI, I am running oraInst.sh and root.sh from root user. oraInst.sh run fine but when we run root.sh following error encountered while checking the logs.
    2011-09-12 22:04:21.996: [ OCRCONF][3915558416]ocrconfig starts...
    2011-09-12 22:04:21.996: [ OCRCONF][3915558416]Upgrading OCR data
    2011-09-12 22:04:21.997: [  OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2011-09-12 22:04:21.997: [  OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 1
    2011-09-12 22:04:21.997: [  OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 2
    2011-09-12 22:04:21.997: [  OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 3
    2011-09-12 22:04:21.997: [  OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 4
    2011-09-12 22:04:21.997: [  OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 5
    2011-09-12 22:04:21.997: [  OCRRAW][3915558416]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
    2011-09-12 22:04:21.997: [  OCRRAW][3915558416]proprioini: all disks are not OCR/OLR formatted
    2011-09-12 22:04:21.997: [  OCRRAW][3915558416]proprinit: Could not open raw device
    2011-09-12 22:04:21.997: [ default][3915558416]a_init:7!: Backend init unsuccessful : [26]
    2011-09-12 22:04:21.997: [ OCRCONF][3915558416]Exporting OCR data to [OCRUPGRADEFILE]
    2011-09-12 22:04:21.998: [  OCRAPI][3915558416]a_init:7!: Backend init unsuccessful : [33]
    ** Urgent help is required as my production environment setup/activity is halted due to this.
    Thanks in Adv.
    Yuvrajsinh Chauhan

    ./runcluvfy.sh comp ssa -n "vel-kol-db1","vel-kol-db2" -s /ORASYS -verbose
    ./runcluvfy.sh comp cfs -n "vel-kol-db1","vel-kol-db2" -f ocfs2 -verbose
    ./runcluvfy.sh comp ssa -n "vel-kol-db1","vel-kol-db2" -s /dev/mapper/360060e80102077c000090010077c000e -verbose
    ./runcluvfy.sh comp crs -n "vel-kol-db1","vel-kol-db2" -verbose
    ./runcluvfy.sh comp ocr -n "vel-kol-db1","vel-kol-db2" -verbose
    ./runcluvfy.sh comp voting -n "vel-kol-db1","vel-kol-db2" -verbose
    verify this

Maybe you are looking for

  • Call external RFC in a workflow

    Hi! I'm going through the tutorials at http://help.sap.com/saphelp_46c/helpdata/en/fb/1359c4457311d189440000e829fbbd/frameset.htm. I had a question - as one of the steps in the workflow, is it possible to call an RFC on an external system (a destinat

  • Audit report for block/release Vendor Invoices

    Dear Experts, I need a report for Internal Control purposes that traces the block / release invoices per Vendor, with the respective reasons, users involved , date, invoices amount.    Is there any standard report for it ?  Thank you for your help Ki

  • Synchronous RFC to SOAP scenario (RFC or XI adapter?)

    Hi there, i have following functional requirement from my customer, SAP is going to send  some data (3 fields) to XI and XI has to send them to an appl that will return a status. This status has to be sent back to SAP. As the appl deals with xml mess

  • What is Bandwidth Limit Exceeded error?

    I was trying to go into "http://laparrillaonline.com/". Instead a window popped up stating " 509 Bandwidth Limit Exceeded and below it said: The server is temporarily unable to service your request due to the site owner reaching his/her bandwidth lim

  • VWLC and Apple TV

    Hello, I'm using a Cisco Virtual Wireless Controller in version 7.4.110.0 with 2602 access points in FlexConnect mode. I'm using only one WLAN with 802.1x authtication and dynamic VLAN assignation. I have 13 wired Apple TV (v3).  In controller config