Error occured while extracting the data from BSIK Table

Hi Experts,
I am trying to extract the data from "BSIK"  by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,

Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima

Similar Messages

  • Raw Read Error Rate, Errors occurred while reading raw data from a disk

    hi
    when I turn my pavilion dv6 2170ee computer on screen shows below error.
    system diognostics (F2) does not any work
    and when my windows7 comming up this error was shown.
    I install Hard Disk Sentinel software and this program shows below:
    Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
    There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
    26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
    Replace hard disk immediately.
    how can I fix it?
    may drive format (Fdisk) and renewing windows can fix it?
    tanx and regards
    Mohammad

    Hello mohkhosh,
    I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
    After reviewing everything  you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
    HP Technical Support, North America 1-800-474-6836. For all other regions click here.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • No data Exists error while retrieving the data from a table

    Hi Everyone!
    I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

    Hi !
    thanks for ur response...
    I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

  • Error 8 while loading the data from the souce system

    Hi Gurus
    Every day we are loading some data from one of our souce systems through process chain
    But today all the loads failed complaining about error 8 while extacting the data
    connection to source system is fine
    we have the problem while loading master data from the same source system
    any solution?
    Thanks in advance

    Hi,
    Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
    hope it helps...
    regards,
    Raju

  • Error encountered while collecting the data from JMS topic bus

    Iam encountering a problem while collecting the data from JMS topic bus and pushing the data to BAM.On the DesignStudio window, after I click on “update” button in the plan window to run the plan I get the following exception messages:
    IMessageSourceReceiver->messageReceive:
    javax.naming.CommunicationException: Connection refused: connect
         at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
         at
    com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at
    iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
         at
    iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerS
    tart(JMSMessageSourceReceiverImpl.java:1001)
         at
    iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageRecei
    ve(JMSMessageSourceReceiverImpl.java:326)
    Caused by: java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
         at
    java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
         at java.net.Socket.connect(Socket.java:426)
         at java.net.Socket.connect(Socket.java:376)
         at java.net.Socket.<init>(Socket.java:291)
         at java.net.Socket.<init>(Socket.java:147)
         at
    com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnecti
    on.java:682)
         at
    oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSoc
    ketRmiTransport.java:58)
         at
    oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java
    :78)
         at
    oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTr
    ansport.java:68)
         at
    com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.ja
    va:646)
         at
    com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientCon
    nection.java:190)
         at
    com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.jav
    a:174)
         at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
         ... 5 more
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3A]
    Error during Message Receive operation.
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3B]

    The error msg says that your BAM server cannot connect to your JMS provider. Make sure your configs are all ok, in EL DesignStudio, BAMArchitect EMSdefinition, etc. You can refer to the samples and technotes and tutorials to understand these details. If you are following the steps in the technote etc. pl verify your oc4j container is running, and oc4j version and 'jndi path' is ok. Give the doc name, pg number and step where you are getting this error.

  • Error while extracting the data from R/3

    HI all,
    I am extracting HR data from R/3 system.
    It is throwing the below error message.
    Error: Splitting error User Exit employee/date/hrs 00100545 20071106 2.000
    I am not sure how to rectify this error. Is this issue with data in R/3? Does it have to be corrected in R/3?
    Do let me know what can be done.
    Thanks in advance,
    Maddy

    Hi Maddy,
    can you tell me if there are any routines used to split the employee, date and hrs fields data?
    If so check for the code is with our systez errors?
    What is the source system?
    what is the data source?
    Did you check for how the data exist in the source? goto RSA3 and check for the data how it look like for the employee , date and hrs records.
    Regards
    KP

  • Error occurred when view the data from physical layer

    Hi ,
    I have created system  DSN like "demo1" for excel file. After that i import the excel file into administration tool.
    after that i want to view the data from physical layer. At that time ,I am getting following error .
    Please resolve this issue.
    Thanks in advance,

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • Error in source system while extracting the data from R/3!

    Hi,
    i had created FM and extract strcucture in R/3 .
    using the above two, i had created data source using RSO2 T code.
    when i checked the extractor ( RSA3 T code) in R/3  it was working fine .
    (status messege displayed as 1000 records selected).
    then i assigned  this data source to infocurce and creted info cube using the same info source.
    but when i schedule the info package it is syaing in the monitor screen "error in source system".
    what could be the problem?
    Thanks,
    Ravi

    Hi
    trhese are the possiblies
    1.first check the source system connection and find if there is any error in it.
    2.Go to sm37 and find whether the  request is completed or not if its terminated find out the time. how long does it takes to complete the process.
    3.once again relicate the data source and find whether is it again extract data.

  • Error occured while uploading the data for Tocde QP01 (BDC)

    Hi,
    I am facing a strange problem i.e. when i try to upload the data for the Tcode QP01 i am able to upload the data for the 18 rows but when it is more than 18 ,it gives the following error and saves the data upto 18 rows only :-
    CALL_TRANSACTION QP01 returncode:     0  RECORD:          0
    S Field RC27X-FLG_SEL . not found in loop of screen SAPLCPDI 1400
    S Cursor field PLMKB-VERWMERKM (18) does not exist in the screen
    S Field PLMKB-VERWMERKM (18) does not exist in the screen SAPLQPAA 0150
    S Field PLMKB-STICHPRVER (18) does not exist in the screen SAPLQPAA 0150
    S Inspection plan with plan group 12775 for material 200999 is saved
    Is there any way to solve this problem...

    hi,
    Ok,i agree with you but the thing is it was allowing to upload the data for more than 18 rows as there was logic written. It is specified in the code:-
    ELSEIF itab1-serial > 18 AND itab1-serial < 35.
                  IF index = 19.
                    index = 2.
                  ENDIF.
    Edited by: nav009 on Sep 9, 2009 8:25 AM

  • WPC Error- Cannot render container : An error occurred while loading the do

    Dear All
    we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
    following messgae appera when we open up a page to edit in WPC
    Cannot render container : An error occurred while loading the document from the resource content
    we found this exception in error log in Server..
    couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
    #1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
    #1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
    #1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
         at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
         at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
         at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
         at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
         at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
         at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
    Please tell us how to fix this error
    regards
    Buddhike

    Need to upgarde to SP14

  • Need to extract the data from the CRM table : SCAPPTSEG

    Hi BW Experts,
    I want to extract the Data from CRM Table "SCAPPTSEG" to BW. The dates are stored in UTC Format.So for getting the date in CET format, we have used the Function Module "IB_CONVERT_FROM_TIMESTAMP".
    I want to create a datasource for extracting the data from "SCAPPTSEG" table and i need to use the function module for getting the date in CET Format.
    Can i achieve this action through Generic Extraction.
    please provide me the steps to achieve this.
    Thanks,
    Shahina.A

    not answered

  • "An error occurred while extracting files from the package "BaseSystem.pkg".

    Hello!
    I have a
    MacBookPro5,5
    Prozessortyp:Intel Core 2 Duo
    Prozessorgeschwindigkeit:2.26 GHz
    Anzahl der Prozessoren:1
    Gesamtzahl der Kerne:2
    L2-Cache:3 MB
    Speicher:2 GB
    Busgeschwindigkeit:1.07 GHz
    Boot-ROM-Version:MBP55.00AC.B03
    SMC-Version (System):1.47f2
    Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
    Problem:
    I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
    Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
    Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
    Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n    NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n    NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n    PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
    Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
    Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
    Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
    Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
    Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation:   139 MB wired,   259 MB trapped,   397 MB active,     7 MB inactive,  1246 MB free,  1650 MB usable,  2048 MB total

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • Hi this message appears after 2 hours downloading Mavericks : an error occurred while extracting files from the package "mzps4135638417199433253.pkg"

    Hi this message appears after 2 hours downloading Mavericks in App Store :
    an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
    Same with "CMD + R"
    Help...

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

    Hi,
    We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
    Error: 4014, Severity:20, State: 11.   A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
    SQL Server Data Tools and SQL Server Database Engine reside on the same server.
    We tried the following:
    Disabling TCP Chimney Offload
    Installed Windows Server 2008 SP1
    Splitting our SSIS code into multiple steps so it is not all one large continuous operation
    The error occurs during a BulkDataLoad task.
    Other options we are investigating with the engineering team (out-sourced, so delayed responses):
    Firewall configurations (everything is local, so this should not make a difference)
    Disabling the anti-virus scanner
    Are there other things we can try?
    Any insight is greatly appreciated.
    Thanks!

    Hi HenryKwan,
    Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
    Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
    Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
    Set "RetainSameConnection" Property to FALSE on the all the connection managers.
    Reference:
    https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
    If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • No Data Shown because an error occurred while running the query

    Discoverer 10gR2 using Plus on Firefox:
    I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
    The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
    All parameters except the extra "Model" are shared between the sheets.
    When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
    When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
    If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
    Booooo.
    Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
    Has any body run into this behavior? Is there an answer?
    -- Ron Olcott, Business Intelligence Product Manager

    What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
    John DIckey

Maybe you are looking for