Error occured while previewing LCA

Hi Folks,
     I got a sample LCA from Developer center examples and trying to deploy of the Server ES 2.5 (turnkey installation with JBOSS AS). When i choose this LCA file for deployment in Application Management, and then previewed, leading to an error message as follows
Error previewing archive:  'org.omg.CORBA.TRANSIENT: Retries exceeded, couldn't reconnect to  192.168.1.3:3528  vmcid: 0x0  minor code: 0  completed: No'
please suggest me why this is happening.
thanks in advance
Rajesh

I have the exact same problem with a lca from devnet

Similar Messages

  • Exchange Office Web Apps Preview Does not work in OWA. An error occurred while the document preview was being created

    Hi,
    I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
    I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
    When I login to owa for user test1 and preview the attachment it works fine.
    However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
    " An error occurred while the document preview was being created. Please try again later " as follows
    I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?

    Hi,
    To narrow down the cause, I’d like to recommend the following troubleshooting:
    1. Does the error appear when you directly access test 2 mailbox through OWA?
    2. Check if there is 141 error in your event log.
    3. Check whether Office web app server connects with Exchange server when the issue happens.
    Access the URL: https://hostname/hosting/discovery
    4. Grant full access permission again and check the result.
    For more information about Office web app integration with Exchange, please refer to the following article:
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Error occured while sending mail SO_OBJECT_SEND

    Hi all,
    While using ME23n for print preview of a PO I m getting the below error :
    Error occured while sending mail SO_OBJECT_SEND,return code Z8.
    The problem is this FM : SO_OBJECT_SEND is not explicitly used in the Driver program.
    In debugging mode if I set a Break-point at SO_OBJECT_SEND, it shows BREAKPOINT set,
    but doesnt stop at that place.
    If any one of you know the solution or if you can suggest some points regarding this problem,
    it will be of great help...
    Thanks & Regards,
    Ramya

    Hi,
    If it is not stoping means may be the so_document_object is calling based on any condtion.
    Y u can't you go ur driver program and search for the FM.
    Otherwise put the break point at the statement 'CALL FUNCTION'.
    Thanks,

  • An error occurred while opening the file, you can not open this file because it does not page???

    Dear all,
    i am test the report to show "No Data Found"  world, but, when i preview to PDF, i got  the message :An error occurred while opening the file, you can not open this file because it does not page.
    i try to load the other xml file that have data, and report work,no error.
    i don't know where is the problem, so i need some help....
    Thanks in advance for your response.
    my rtf report:
    <?call:header?>
    <?if:count(PLAN_CODE)>0?>
    <?for-each@section:G_PLAN_CODE?>
    <?template:Header?>
      <?for-each:G_PURPOSE?>
      <?end for-each?>
    <?end template?>
      <?for-each:G_PLAN_SUBSQL2?>
      <?end for-each?>
    <?end for-each?>
    <?end if?>
    <?if:count(PLAN_CODE)=0?>
    ====================No Data Found ===================
    <?end if?>
    about xml:
    if no data query back:
    <?xml version="1.0"?>
    <!-- Generated by Oracle Reports version 6.0.8.27.0 -->
    <NARLGLR005>
      <LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
      <CF_START_DATE>102.3</CF_START_DATE>
      <CF_END_DATE>102.3</CF_END_DATE>
      <CF_TITLE_NAME>Company</CF_TITLE_NAME>
      <CF_OU_NAME>IT Department</CF_OU_NAME>
      <CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
      <CF_PRINT_DATE>102.11.18  15:48:10</CF_PRINT_DATE>
    </NARLGLR005>
    if have data:
    <?xml version="1.0"?>
    <!-- Generated by Oracle Reports version 6.0.8.27.0 -->
    <NARLGLR005>
      <LIST_G_PLAN_CODE>
        <G_PLAN_CODE>
          <PLAN_CODE>03101C3003</PLAN_CODE>
          <PLAN_NAME>03101C3003_test</PLAN_NAME>
          <PLAN_EM>John</PLAN_EM>
          <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
          <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
          <PLAN_HOSTS>abc_super</PLAN_HOSTS>
          <LIST_G_PURPOSE>
            <G_PURPOSE>
              <PURPOSE_CODE>11600000</PURPOSE_CODE>
              <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
              <LIST_G_PURPOSE_CODE>
                <G_PURPOSE_CODE>
                  <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
                  <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
                  <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
                  <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
                  <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
                  <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
                  <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
                </G_PURPOSE_CODE>          
              </LIST_G_PURPOSE_CODE>
              <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
              <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
              <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
              <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
              <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
              <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
              <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
            </G_PURPOSE>      
          </LIST_G_PURPOSE>
          <LIST_G_PLAN_SUBSQL2>
            <G_PLAN_SUBSQL2>
              <GL_DATE>31-07-12</GL_DATE>
              <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
              <AP_UNAPP></AP_UNAPP>
              <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
              <PLAN_CODE1>03101C3003</PLAN_CODE1>
              <PLAN_EM1>Elly</PLAN_EM1>
              <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
              <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
              <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
              <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
              <DESCRIPTION>101 year</DESCRIPTION>
              <CF_GL_DATE>101.7.31</CF_GL_DATE>
            </G_PLAN_SUBSQL2>
          </LIST_G_PLAN_SUBSQL2>   
          <CF_START_DATE1>99.1</CF_START_DATE1>
          <CF_END_DATE1>102.11</CF_END_DATE1>
          <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
          <CF_OU_NAME1>IT Department</CF_OU_NAME1>
          <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
          <CF_PRINT_DATE1>102.11.19  17:12:19</CF_PRINT_DATE1>
          <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
          <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
          <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
          <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
          <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
          <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
          <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
          <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
        </G_PLAN_CODE>
      </LIST_G_PLAN_CODE>
      <CF_START_DATE>99.1</CF_START_DATE>
      <CF_END_DATE>102.11</CF_END_DATE>
      <CF_TITLE_NAME>Company</CF_TITLE_NAME>
      <CF_OU_NAME>IT Department</CF_OU_NAME>
      <CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
      <CF_PRINT_DATE>102.11.18  15:48:10</CF_PRINT_DATE>
    </NARLGLR005>

    Hi,
    You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
    Click Start, right-click Computer, click
    Properties, and then click Advanced system settings.
    On the Advanced tab, click Environment Variables.
    Locate and select the __COMPAT_LAYER variable, and then click Edit.
    Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
    If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
    http://support.microsoft.com/kb/929135
    Regards,
    Melon Chen
    TechNet Community Support

  • TS1135 Cannot process the Photo Book; it fails always at the very last stage with "error occurred while uploading on of your files. Pls check your network connection and click Retry..." Tried at 12 times and no joy!  Can anyone help?

    Can anyone help with the Photo Book process?  I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process.  I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files.  Please check your network connection and click Retry to resend your files."   It fails every time, any advice?  My server is TalkTalk which may explain everything !! ??   Help.

    Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there. 
    Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors.  Keep that file to compare with the printed copy when it arrives.
    OT

  • Apple TV2 throwing "An error occurred while loading this content"

    Hi
    I have purchased an Apple TV2 recently and tried to watch rental movies. Preview of all the movies working fine but after rental is consistently giving error "An error occurred while loading this content". I have 8Mbps line and can rent movies from my PC and also from iPad. But Apple TV is giving this error.It also gibe similar error while trying to watch video podcasts of bigger size. I have done the recent apple TV update but no luck. Frustrating. Any help from any one. I have now rentals on my Apple TV that can not viewed and going to expire in 3 weeks.
    Regards
    Anil

    are you renting these movies directly from the appleTV or are you renting/downloading from iTunes on a computer then streaming to appleTV?

  • An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

    Hello
    i got this error in step2
    Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
    here is full summary
    > Bootstrap-CsComputer
    Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
    Checking prerequisites for bootstrapper...
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Host name: lync.rcc.local
    Disabling unused roles...
    Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
    Checking prerequisites for roles...
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Checking prerequisite PowerShell...prerequisite satisfied.
    Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
    Checking prerequisite SupportedServerOS...prerequisite satisfied.
    Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
    Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
    Checking prerequisite IIS...prerequisite satisfied.
    Checking prerequisite IIS7Features...prerequisite satisfied.
    Checking prerequisite ASPNet...prerequisite satisfied.
    Checking prerequisite KB2646886Installed...prerequisite satisfied.
    Checking prerequisite BranchCacheBlock...prerequisite satisfied.
    Checking prerequisite WCF...prerequisite satisfied.
    Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
    Checking prerequisite VCredist...prerequisite satisfied.
    Checking prerequisite SqlNativeClient...prerequisite satisfied.
    Checking prerequisite SqlClrTypes...prerequisite satisfied.
    Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
    Checking prerequisite UcmaRedist...prerequisite satisfied.
    Checking prerequisite WinFab...prerequisite satisfied.
    Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
    Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
    Checking prerequisite RewriteModule...prerequisite satisfied.
    Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
    Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
    Installing any collocated databases...
    Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
    An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
    what should i do?
    Please help me

    Hi,
    The issue may be related to disk read and write cache. Here is a similar case for your reference:
    http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • I cannot print, get error 'An unknown error occurred while printing."

    I can see that hundreds of other people also have this problem and I can't understand why Mozilla don't fix it.
    When I go to print an email or a receipt, whether by printer or by PDF, I *sometimes* get the error, 'An unknown error occurred while printing.'
    It is very frustrating as the problem is intermittent. Sometimes it works, sometimes it doesn't... even with the same page being printed. Incidentally, that page can be printed in both Chrome and Internet Explorer without a problem.
    I have tried other "solutions" in similar, now closed, threads. However, 'reset' is not working for me. Closing Firefox and reopening doesn't work either. I have the latest version of Firefox: 14.0.1 and have Windows x64. There is enough available space in the cache...
    I'm just at my wits end with this.

    With the latest updates FF 19 BETA and Acrobat X. The new one with the black PDF screen), I'm having difficulty too printing to Adobe PDF. System Win 7 x 64.
    Printing to physical printers not an issue.
    No errors, but (Not Responding either in FF or Acrobat.) Printing to the PDF printer directly sometimes works. Using the work-around fast enough, it seems to always work.
    I found a work-around:
    Goto Print Preview
    Select Print
    Type in your file name
    IMMEDIATELY press OK and Minimize Firefox.
    All of the progress boxes/windows are getting confused otherwise. With FF opened as a normal page, there are too many different progress boxes.
    Acrobat has one, the windows print driver has one, FF seems to have one and they all can't be on top.
    They will if FF is minimized.
    Incidentally if FF is killed, the "Creating Adobe PDF" shows its face from being hidden.
    I did reset Firefox.
    This is seriously messed up now. It used to work fine until the last round of updates from M$, Adobe and FF.

  • "error occurred while loading this content" ... ATV2 not even 24hrs old...

    I just bought this ATV2. I am using AT&T internet with an EDGE250AEW wireless router and a Motorola modem.
    I'm attempting to rent movies with my ATV2 and watch them. After a myriad of times of trying to just sign into my iTunes account via ATV2, I finally was able to rent a movie.
    When I click on the movie to rent, I'll press "PLAY" and it will give me the message "error occurred while loading this content".
    I realize my internet connection is slow (1.5M) so I am renting in SDef ... but that still shouldn't be preventing me from even being able to rent a movie.
    I attempt to watch a movie preview ... and a 2 minute movie preview takes over 5 minutes to load ... and it wont start playing until it's completely loaded. Bollocks!
    I have updated my software, I have rebooted, I have restarted, I have recycled ... no avail.
    Is this a PORT opening issue? I dont know what is going on but it's REALLY frustrating to have a 100 dollar paper weight.
    I AM able to use home sharing and watch movies from my Macbook iTunes to the ATV2 ... but rentals from the store via the ATV2 doesn't work.
    help please

    You are definitely NOT the only one here with this MAJOR issue: http://discussions.apple.com/thread.jspa?threadID=2615363
    I have the same issue, and I have a 6MB AT&T Elite Pro DSL service that I have always had since purchasing my ATV2 in October. Never have I had these issues until the 4.2 update. Horrible software bug and it keeps coming back up. TV shows, movies, etc. No rhyme or reason. Some shows new, some old. Some movies HD, some SD. It is almost as if the Apple TV rolls a die and if I get an odd number, I get the error message. Even number, it plays through...
    Why would Apple continue to release software updates that do not address these issues? We have to keep leaving Apple feedback on this issue that is big enough that over 13,000 views on their own message board confirm this problem since the 4.2 software update a few weeks ago...
    Tell your friends: http://www.apple.com/feedback/appletv.html

  • "Error occurred while communicating with the scanner"

    Just bought this printer from a friend, and every time I try to scan I get the error message "Scanner reported an error: An error occurred while communicating with the scanner." 
    Anyone know how to fix this so I can use the scanner?

    You @cleoambre  are a good friend, you bought the printer and are now trying to help troubleshoot the scanner issue! I would be happy to help you with this
    Since this printer is a tad on the older side, there is no full feature software and driver for it to install on 10.6. Instead you can Install the printer using the Apple Software update.
    You can still complete scans from the Mac using Preview, Image Capture, or the System Preferences window to scan. I will post a few helpful videos below;
    Method one: Scan from the Print & Scan window   
    Method two: Scan from Apple Preview
    Method three: Scan from Apple Image Capture 
    Please let me know if this information helps to resolve the issue.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Error occurs while activating a 'Write Optimized' DSO.

    I am getting error " There is no PSA for infosource 'XXXX'  and source system 'XXX' while activating a newly defined DSO object.
    I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSO

    Hi,
    For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
    From SAP help
    You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
    Thanks
    Srikanth

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
    The system cannot find the file specified
    Cannot connect to COWBOYS.
    Here are the technical details===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
    Error Number: 2
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The system cannot find the file specified
    I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
    Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
    many times and cannot connect to my local DB. 
    How do I connect to my Local DB? 
    Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
    instance ID from name). Please uninstall then re-run setup to correct this problem.
    I would happily re install it, if it wasn't my 20th time.
    I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
    May be the solution is very simple, but I am too frustrated. 
    Some of the things I have tried:
    From a command prompt, enter one of the following commands:
    net start "SQL Server Agent (MSSQLSERVER)" OR 
    net start "SQL Server Agent(instancename)"(for instance)
    on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
    Details
    Product:
    SQL Server
    ID:
    2
    Source:
    MSSQLServer
    Version:
    10.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Version:
    9.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • Error Occured while processing a Request-openning a another coldfusion page from old page link

    in one page there is dynamic link in that i want to open anather page...
    code is compiled ok and page is at place where i refered a link but it gives error 'error occured while processing a request'
    Error Diagnostic Information
    An error has occurred.
    HTTP/1.0 404 Object Not Found
    this error shows please help me...
    i am new in coldfusion.
    Thanks.

    Hi Salvatore,
    This is a very wide error. You did not provided any other info as specified by Michael. Just a wild guess, this sort of error occurs generally when classpath or java_home properties are not set correctly. But, as i said it is very wide, some more info will be useful.
    Regards
    Chander Kararia

  • Internal Error occurred while calling the ProcessDPCommands API

    We have installed Business Objects XI  with MySQL. We are getting following error when we click on view query on the WEBI Reports
    " Internal Error occurred while calling the ProcessDPCommands API  Error WIS 30270".
    When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
    Please hep to fix this problem
    Installation is on Solaris 10
    Edited by: AshishDatar on Nov 6, 2009 3:00 PM
    Installation is on Solaris 10

    did you check whether universe connection is pointing to the correct db?The following url might be helpful:
    [http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

  • I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

    I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
    I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
    Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
    Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
    Bullsh*t Windows can help me with anything from Apple.
    So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
    So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
    What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
    I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
    Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
    So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
    . . . . . . . . . . . . Help me.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W.

Maybe you are looking for

  • Key rule 32 (target field: ZCONFDATE): Initial update set

    hi all I am facing error while activating the transformations that initial update status set. due to this i m not be able to activate. This is occurring while migrating update rules. please suggest solutions. amit

  • Issue in Price record determination

    Hello All, Scenario: The sales order has to determine 2 types of tax ( service , VAT)in the pricing procedure, so the customer classification has respective  parameters and the price conidtions are maintained for both the condition types the problem

  • Page switching in Streaming portal

    Hi, Am been working with weblogic portals recently. In file based portals, we used to switch to different pages using the pageBackingContext. But, am now working with Streaming portals, where we render the pages using the Preference set for the portl

  • I have a major lag between typing and the letters appearing on my screen? Any suggestions?

    When the key board appears on the screen I start typing, but there appears to be a major pause between the typing and the letters appearing on the screen.  It started after updating my system some time ago.  I have an ipad1. 

  • Run program wihtout all of NIDaq and NIMotion

    One of our former developers wrote a LV 8.2 exe that controls an NIDaq card and an NIMotion card and stores the results in an SQL table.  We now have people that do not have the full hardware setup wanting to see the results with this program.  We in