Error occured while saving PO in Extended Classic Scenario

Hi All,
I have set up Extended Classic Scenario.
While I try to make any changes in PO through manager or purchser I get following error:
"Cannot get process info from WF archive; function AS_API_READ causes exceptn No Infostruc Found."
Please suggest.
Regards,
Yaniv
Edited by: yaniVy on Jun 17, 2011 12:33 PM

Hello!
This message usually is shown when no workflow can be determined at the time the approval process starts.
Please check your start conditions at transaction SWB_COND and compare them with the information in your PO (values, status, etc). Then make the appropriate changes in your workflow.
Best regards,
Christian Zeuch

Similar Messages

  • Error occurred while saving document in Web Analysis Studio

    We have encountered an issue when we tried to save a new report in Web Analysis. An error message box will prompt up displaying "Error occurred while saving document." (Please refer to the attached screenshots). Clicking the details button gives no response.
    Originally we encountered this whilst creating a report with an SQL spreadsheet (JDBC connection tested successfully), which failed to save. Proceeding to test this saving a blank report also gave the same error message.
    The report shows up in the Oracle view, however also produces an error when trying to open it. "Unable to perform request
    Undefined exception encountered. Recommended Action: Contact your corporate technical support." (Please refer to the attached screenshots)
    Web Analysis version 11.1.2.3.000.1175
    Please advise on how to handle this case

    Hi Soumya,
    Thanks for your reply. I am already using the admin account which is given administrator provisioning under Reporting & Analysis. I have not had issues in the past of saving documents to the server location (e.g. with FR studio). Any ideas as to what else could cause this error? Thanks!

  • Error occured while saving the user account information

    I'm trying to install LiveCycle ES 2 with PDF Generator on a Windows 2008 server wtih SQL Server 2005.  When I run the configuration manager I get an error in the step where you add the administrator user credentials for generator.  The error I'm receiving is ALC-PDG-080-032-Error occured while saving the user account information.  Has anyone seen this issue before?  Any ideas on what the problem may be?

    Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
    Good luck, and please report your findings,
    Hunt

  • Error occured while saving ume properties

    Hi All,
    We have installed SAP ERP 6.0 SR3 central instance(ABAP+JAVA)
    I logged into Enterprise Portal using J2EE_ADMIN user.
    I am trying to change properties in System Administration --> System configuration --> UME Configuration --> ABAP System.
    I changed properties then i clicked on 'Saved All changes' button. I am getting following error.
    "An error occured while saving UME Properties. contact your system administrator'
    I want solution to move forward.
    Regards,
    Phanikumar.

    Hi Phanikumar.
    Please check whether J2EE_ADMIN is having super administrator role in portal or not.
    If you have assigned system administration role directly then it might be the case.
    You can try with config tool if still you are getting the problem in the portal
    Hope it helps
    Regards
    Arun

  • Error occured while Saving The Project

    I have a project that is giving me a 'unknown error occurred while saving the project. Select 'Save As' from the file menu and save the project to a new location'.
    It would seem that maybe it's saying that it's out of room but I'm saving on a harddisk that has over 1T of space left. I tried to do as they said and create another folder and save in a new location but  it gives me the same error.
    Has anyone dealt with this.? I have a wedding project that I can't make any changes to. It was doing this before and after I updated to Adobe 4.2.
    Using:
    Adobe Premiere Cs4
    Matrox RXT2
    6 Rams of memory
    4T system
    Windows Vista 64 Bit
    Nividia GEForce 9600

    Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
    Good luck, and please report your findings,
    Hunt

  • An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

    Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
    Does anyone know what could cause this error message?
    Thanks a lot for any hint.
    Sergey

    Hi Henry,
    I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
    I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
    Please let me know if this is unusual for this version.
    Regards,
    Arvind E

  • I am trying to create a community addition, but just keep getting *Error occurred while saving your data.

    I am trying to create a community addition, but just keep getting   *Error occurred while saving your data.
    Trying to add the following community addtion for:     http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
    In the above website do NOT copy the command, you have to type it in.  Webpage Error.
    You can use both    dsquery server –hasfsmo schema    and    dsquery server -forest –hasfsmo schema
    The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.

    Hi John,
    You might have better luck posting this in the library feedback forum here:
    http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
    It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • An error occurred while saving. Alert window

    Recently, whenever I select text and copy it (command C) in nearly any program (ex.: Browswer windows, Apple Mail, even a file name in Finder), I get a pop-up window with "An error occurred while saving." The yellow triangle with "!" and a pair of binoculars show in the window. I've just run Diskwarrior and have also used Apple's Disk Utility to repair permissions as a precaution.
    What's going on?

    OK, I think we're on the trail...
    So, you have Chronos Notes v6.5.4?
    I'd be tempted Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then to move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.chronos.SOHOOrganizer.plist
    /Users/YourUserName/Library/Preferences/com.chronos.SOHONotes.plist”
    /Users/YourUserName/Library/Preferences/com.chronos.ChronosNotesService.plist
    Maybe just this last one for a try!?
    Reboot... we can always move them back & reboot if we need to.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    http://support.chronosnet.com/customerservice/kb_cat.php?s=49cbbb1e4a685b3ad7573 9d5153651fd&id=13&t=qanda

  • An error occurred while saving the following file

    I want to build an app but I get this message:
    An error occurred while saving the following file:
    C:\Acquire U6 DS&FTP\Acquire U6 DS&FTP.vi
    Nothing more, absolutely nothing more.
    Before that I could build it without problems, now I can't. The file in the message is the main file (by the way it runs fine). I've tried creting a new project but it doesn't work.
    I really hope somebody can help me.
    Thanks,
    JuanM

    What's changed in your code?  Have you tried undoing anything or reverting back to a pervious version?
    Reese, (former CLAD, future CLD)
    Some people call me the Space Cowboy!
    Some call me the gangster of love.
    Some people call me MoReese!
    ...I'm right here baby, right here, right here, right here at home

  • Error Occurred while saving the purchase order

    Dear Experts,
    While changing PO and Schedule Agreement using T.Code : ME22, ME32 we are facing below error message.
    Problem occurred While altering and saving the purchase order.
    Error message FGV004 - "SYST:date 00.00.0000 is not permitted" is generated
    when modifying an Scheduling Agreement that does not have a Delivery
    Schedule using ME32L.
    Please Kindly help to fix this error as soon as possible.
    Thanks in Advance.
    Prasath Manoharan

    hi,
    In addition to above..
    I also checked for the SAP note...
    It shows only one note regarding MM...
    pls check the sap note 355827..
    As per this note you need to add few corrections...pls take help of basis consultant..
    Regards
    Priyanka.P

  • Error occurred while saving SAP Lumira 1.15.1 document

    Hi All,
    I got error while saving document in SAP Lumira 1.15.1(Error Desc. : you do not have permission to save the document to its current location). and also occurred while sharing on cloud. Below fig.1 shows while saving and fig 2.shows error while sharing on cloud.
    Currently I am using SAP lumira 1.15.1. Build 879
    fig 1.
    fig 2.

    Hi,
    I faced the same situation while trying to save the document. Since i dint get any valid resolution, i just restarted the Lumira, and now i could save the documents.
    Restarts helps most of the times though it is not recommendable.
    As someone said earlier, it has something to do with Session corruption.
    Lumira Version : 1.15.1
    Regards,
    Sahana

  • Getting a "An error occurred while saving values to the app.config file." message

    The content of the title is just part of the message I get. The second line of the message is: "The file might be corrupted or contain invalid XML."
    I work with a lot of usercontrol libraries, and each one has 1 or 2 connection strings setup, and nothing else. I have no trouble in the code itself using the settings. Nor do I have trouble during runtime with them. But I do have the problem with every single library I work on.
    The problem occurs when I make a change to the settings in the VS IDE (2005), which I do whenever I need to the connection string to point to my test SQL server, or need to set it back to the production SQL server. The connection strings were setup in the Settings tab of the Property page for the application.
    I get the error message whenever I select the settings tab and again when I go to save it. I once tried deleting the app.config file, and recreating the settings, and the message went away until I checked it in. No one else has the problem when they get the files, but when I get then, I get the error message.
    Any ideas what may be causing this. My boss thouight it might be an addon from CodeSMART, but I uninstalled it to see if the errors would go away and it didn't.
    Thanks.
    MarshallMarshall Youngblood

    Marshall,
    I am not sure if it helps in your case, but I have the similar problem. Add foloowing lines in your app.config file  in configSections  tag.
    <
    configSections>
    <
    sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
    <
    section name="ApLibrary.My.MySettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
    </
    sectionGroup>
    </
    configSections>
    let me know if that helps.
    Purvi Patel

  • Error occured while saving trade promotion if a control message is given

    Hi all,
    While creating a trade promotion, we want to control the products and if there is/are not available for our criteria, we want to give an error message and stop the application. I put this control message in the BADI ( EXEC_METHODCALL_PPF -> method : EXECUTE ) that generates a form for the event. In GUI there is no problem, it gives the error message and stops. But in PCUI if this message is given, error page appears like that :
    Message E SPPF_MEDIA 052 cannot be processed in plugin mode HTTP
    Class     -> CX_SY_MESSAGE_IN_PLUGIN_MODE
    Program -> CL_CRM_BSP_FRAME_MAIN ==...CP
    ABAP Class -> CL_CRM_BSP_FRAME_MAIN
    Method        -> DO_REQUEST
    thanks,

    Preferences > Plug Ins & Scratch Disks ( you can select up to 4 sources or drives starting with your startup drive ).  You found Web Settings, but what you want is Illustrator Preferences ( should be found in a source file titled Preferences on you C Drive ).  You may or may not have to delete the Preferences file which will automatically be rebuilt at default settings upon restart.  Your RAM requiremnts may be as low as 256mb, but that is just a starting put.  You need enough RAM to run your operating system and peripherals, as well as other apps you want open the same time you have Illustrator open.  Deleting the Illustrator Prefertences file may not be necessary in your case.  Setup the scratch disks first.

  • Unknown error occured while saving CS2

    I'm using Windows Xp with Service pack 1.
    I have Ilustrator CS2. When I save, an error message pops up saying "An unknown error has occured." Then after that if I try to change something in the illustration, it says "Not enough RAM memory," which makes no sense. The program has worked for me when I had a different download;I don't know where I got it from but it's gone and it was a Trial version--When I opened that one, I had to go to Windows > Color, Tools, etc. because it had no windows up. Anyway. I don't think it's a printer issue. And I have no idea how to delete or move the preferences/settings. When I click the CS2 folder, it doesn't say Settings ANYWHERE. I've seen people suggest that but no one says how to do it. They just expect you to know for some reason. This really gets my goat and it just doesn't make any sense.

    Preferences > Plug Ins & Scratch Disks ( you can select up to 4 sources or drives starting with your startup drive ).  You found Web Settings, but what you want is Illustrator Preferences ( should be found in a source file titled Preferences on you C Drive ).  You may or may not have to delete the Preferences file which will automatically be rebuilt at default settings upon restart.  Your RAM requiremnts may be as low as 256mb, but that is just a starting put.  You need enough RAM to run your operating system and peripherals, as well as other apps you want open the same time you have Illustrator open.  Deleting the Illustrator Prefertences file may not be necessary in your case.  Setup the scratch disks first.

  • MS Word 2007 - An error occurred while saving the Normal Template

    Good Morning... 
    I have a user that is getting the following error. I can resolve the issue if I delete the old normal.dotm and let it create a new one however this users has a lot of custom building blocks and she didn't have a good backup. From what I've been reading and what other coworkers say i'm close to just telling her that she'll need to start over however I thought I would reach out one last time to see if anyone may have a way to "export/recover" the building blocks out of the current normal.dotm file and then "Import" them back into a new normal.dotm. This user has Office 2007Thanks
    This topic first appeared in the Spiceworks Community

    Hi,
    Can you try the following steps and let us know if it works?
    1. Create a folder in your c: drive (say c:\myjdevhome)
    2. Invoke the command prompt, set JDEV_USER_HOME=c:\myjdevhome
    3. cd to JDEV_HOME\jdeveloper\jdev\bin
    4. Start the jdev (jdev.exe).
    5. Run/Debug your application.
    -Arun

Maybe you are looking for