Error Occured while transporting theme in to Netweaver Portal 7.3
Dear All,
We have installed fresh Portal 7.3 and we are trying to transport the theme from Netweaver portal 7.0 to 7.3, but i am getting error while importing the theme
Error Message:
" Cannot perform upgrade: Exception caught while upgrading: Image parameter "parPopInNoGradient" in browser section "default" is not available. This parameter should be used as target image parameter"
same theme is being imported to netweaver portal 7.0 but not in 7.3
Please help me ..........
Dear all,
we have the same problem, with a smiliar error message "Cannot perform upgrade: Exception caught while upgrading: Parameter "parTbsAnglePad2" in browser section "default" is not contained in parameterPool."
but we have installed the most current patches. Is there another possibility, how we can proceed with that error ?
Thanks and regards
Georg
Similar Messages
-
Error occurred while transporting request no. from development to productio
Hi Experts,
I have created a zreport (having a request number ) and activate the zreport ..
While transporting this request from development to production I face the error zreport is inactive .But when I check zreport in development server it is active ..
So how to transport this request.? Please help ..Hello,
Can you ask the basis person to check the transport log and tell as to what error has occured. Most of the time transport fails if one of the dependent object fails to move. For example you have structure that you have used for table declaration in your prog. You moved the program but the structure was not moved. When Tranported , the program will result in an error and saying Struct not present.
What you can do immediately is to go on your prodcution server and try to do a syntax check of the program. I am sure it will show some error and from that you can carry out issue resolution. Also ask the basis person to hvae a look in to ur transport(he can see the same via STMS Tcode).
Regards
Saket Sharma -
Re: Error occurred while transporting a request from dev to quality in BW
Hi BW Guru's,
I have done minor enhancement on one Master Data Data Source. The transports went fine in R/3 side. But in BW system it is giving an error message
There is no DataSource with these attributes
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
The errors affect the following components:
So this is the error message can any one help me how to move further analysis on this issue.
Thanks in Advance,
VenkatHi Venkat,
The problem is during Replicate if the datasource in the target system or during trasport of the InfoSource related.
In this second situation try to transport the Transfer Roules of the InfoSource with all related under/bottom objects, the system will include the Replicate of the DataSource.
Check also if the mapping of the sender and receiver system is correct: Tools --> Mapping of the sorce system...
Ciao.
Riccardo. -
Using Time Machine to back up two systems, OS10.8.3, and OS 10.6.8. Sometimes it backs them up, sometimes I receive this: Backup was not performed because an error occurred while copying files to the backup disc. The problem may be temporary...
Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html -
DBD: An error occurred while trying to load the provider for transport odbo
Hello,
I am trying to create universe on top of BPC cube using 'Business Planning and Consolidation' option under SAP Business Objects in Universe Designer ; however when creating connection I am getting following error messgae
"DBD: An error occurred while trying to load the provider for transport odbo. Failed to load library . System error message: The specified module could not be found."
I am using BO 3.1
Is anyone aware of this issue? Kindly assist.
ThanksWe were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike -
DBD: An error occurred while trying to load the provider for transport sap.
Hi,
I just installed the BO XI 3.1 SP2 & SAP integration KIT 12.0 and could able to import all the roles from SAP client in BO CMC.But when i am trying to create new Universe & creating a connection to SAP it is throwing an error " DBD: An error occurred while trying to load the provider for transport sap.System error message:The specified module could not be found ".
I even applied FIX packs 1.7 & 1.8 for both BOXI 3.1 & SAP Integration KIT,but still throwing the same error.
Could any please help me out in this issue.
Thanks in advance,
SanjayHi,
this looks like a Bug:
Check SAP Note - 1365062
I would recommend installing SP2 for BOXI 3.1
Regards
-Seb. -
I usually use the Persona Rotator using My Favorites as its themes to rotate. Lastely my rotater has not been working. I click on Tools, then Personas, then My Favorites and am asked to sign in to use my favorites with the Rotator. I follow all these steps and all seems to go fine, except my Persona Rotator does not rotate. Again I click on Tools, Personas, My Favorites and there is a message saying "an error occurred while loading your favorite themes" and therefore won't work. I don't know what the problem is or even exactly when it started, but it doesn't work and I'm most disappointed. Please fix or help me to fix it so I can enjoy my rotating themes again.
In order to switch to another persona that you had previously installed, do the following:
#Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
#Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
#Find the one you want to use and click the ''Enable'' button.
To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly. -
I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain -
SharePoint Foundation 2010, hotfix install fail "An error occurred while running detection"
Hi all,
I am having a lot of trouble installing hotfix 2849990 on my server. After running it shows the error "An error occurred while running detection". I tried another hotfix as well but got the same result. I read on the web to do a "repair"
but I cannot seem to access that. I attempting to run the install to get there, I click "Install SharePoint Foundation" a new window begins and I can see a new window open that reads "Please wait while setup prepares the necessarily files"
Very shortly after this opens, it then closes and nothing else happens.
Anybody have any suggestions?
Thanks!Thanks for the quick reply. Here is the Folder I am looking in:
"C:\Users\[My User]\AppData\Local\Temp\2" Let me know if this is incorrect.
Here is some of my opatchinstall log:
OPatchInstall: Logging all properties
OPatchInstall: Property 'PACKAGE.KBARTICLE' value '2880975'
OPatchInstall: Property 'PACKAGE.MIN.MSI.VER' value '3.1.0.0'
OPatchInstall: Property 'PACKAGE.NAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PATH.TEMP' value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp'
OPatchInstall: Property 'PACKAGE.PLATFORM' value '64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PRODUCTNAME' value 'Microsoft SharePoint Foundation 2010'
OPatchInstall: Property 'PACKAGE.PROMPT.ALREADYINSTALLED' value 'The update is already installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.CONFIG.AFTERUPDATE' value 'You must install the same SharePoint 2010 Products and patches on every server in your server farm. If you have multiple servers in your farm, please immediately install the same patches on all the other farm servers once this installation has completed.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETECTIONERROR' value 'An error occurred while running detection.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETFAILED' value 'The detection failed, this can be due to a corrupted installation database.'
OPatchInstall: Property 'PACKAGE.PROMPT.ERROR.WITHKB' value 'The installation of this package failed. Please see for more information.'
OPatchInstall: Property 'PACKAGE.PROMPT.EULA' value 'You must accept the Microsoft Software License Terms in order to continue the installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFAILURE' value 'The extraction of files from this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFOLDER' value 'Select a folder to store the extracted files'
OPatchInstall: Property 'PACKAGE.PROMPT.INITIAL' value 'Do you wish to proceed with the installation?'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLCANCELED' value 'The installation of this package was canceled.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLFAILURE' value 'The installation of this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLSUCCESS' value 'The installation is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' value 'There are no products affected by this package installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTADMINUSER' value 'You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTMINMSIVERSION' value 'This program requires Windows Installer 3.1.0.0 (or greater).'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTNEEDED' value 'This package is not needed for the current release of the installed product.'
OPatchInstall: Property 'PACKAGE.PROMPT.PATCHEDBYADMIN' value 'The update cannot be installed due to a previous update was installed through a modified installation source.'
OPatchInstall: Property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' value 'The expected version of the product was not found on the system.'
OPatchInstall: Property 'PACKAGE.PROMPT.REBOOTNEEDED' value 'Do you want to reboot now to complete the installation of this package?'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.CONFIRM' value '&OK'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DETECTION' value 'Please wait while we determine the list of files that need to be updated.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DISABLE' value 'Do ¬ close applications. (A Reboot will be required.)'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.ENABLE' value 'Automatically &close applications and attempt to restart them after setup is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.OPERATION' value 'The following applications should be closed before continuing the install:'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.DETAILSPREBODY' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition failed to install.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALAPPNAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALREPORTEE' value 'Microsoft'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.INTROREG' value 'We apologize for the update installation failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINCAPTION' value 'Report Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition Installation Failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAININTROBOLD' value 'An error report containing information about the updates that failed installation has been generated.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINNOREPORTBTN' value 'Cancel'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINPLEAREG' value 'Using the information in the report we can investigate and potentially fix the problem you experienced. We will treat this report as confidential and anonymous.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINREPORTBTN' value 'Send Report'
OPatchInstall: Property 'PACKAGE.RM.ENABLED' value '0'
OPatchInstall: Property 'PACKAGE.RM.MINOS.VERSION' value '600'
OPatchInstall: Property 'PACKAGE.STRING.CANCEL' value '&Cancel'
OPatchInstall: Property 'PACKAGE.STRING.CANCELCONFIRMATION' value 'Are you sure you want to cancel setup?'
OPatchInstall: Property 'PACKAGE.STRING.CONTINUE' value '&Continue'
OPatchInstall: Property 'PACKAGE.STRING.DETECTING' value 'Please wait while update detection is being run.'
OPatchInstall: Property 'PACKAGE.STRING.EULACHECKBOX' value 'Click here to &accept the Microsoft Software License Terms.'
OPatchInstall: Property 'PACKAGE.STRING.EXTRACTING' value 'Extracting files, please wait...'
OPatchInstall: Property 'PACKAGE.STRING.HELP' value 'Usage:
/extract:path, extracts the content of the package to the path folder
/log[:path to log file], enables verbose logging for the update installation
/lang:lcid, sets the user interface to the specified locale when multiple locales are available within the package
/quiet, runs the package in silent mode
/passive, runs the update without any interaction from the user
/norestart, prevents prompting of user when reboot of machine is needed
/forcerestart, forced restart of machine once update is complete
/?, shows this help message'
OPatchInstall: Property 'PACKAGE.STRING.INSTALLING' value 'Please wait while the update is installed.'
OPatchInstall: Property 'PACKAGE.SUCCESS.WITHERRORS' value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
OPatchInstall: Property 'PATCH.FILEID.EULA' value 'volumelicense_eula_postrtm_en-us.txt'
OPatchInstall: Property 'PATCH.LANG' value '1033'
OPatchInstall: Property 'SYS.ARGS.EXTRACT' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.HELP' value '0'
OPatchInstall: Property 'SYS.ARGS.HELPREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANG' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGVALUE' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LANGVALUEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOG' value '1'
OPatchInstall: Property 'SYS.ARGS.LOGPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LOGPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVE' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIET' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIETREADONLY' value '0'
OPatchInstall: Property 'SYS.ERROR.ARG1' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG2' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG3' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG4' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG5' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.CODE' value '0'
OPatchInstall: Property 'SYS.ERROR.INERROR' value '0'
OPatchInstall: Property 'SYS.ERROR.TYPE' value 'NONE'
OPatchInstall: Property 'SYS.LANG.LCID' value '1033'
OPatchInstall: Property 'SYS.LANG.NAME' value 'en-us'
OPatchInstall: Property 'SYS.LANG.RTL' value '0'
OPatchInstall: Property 'SYS.MSI.VER' value '5.0.7601.17807'
OPatchInstall: Property 'SYS.PATCH.NEEDREBOOT' value '0'
OPatchInstall: Property 'SYS.PATCH.SUGGESTREBOOT' value '0'
OPatchInstall: Property 'SYS.PROC.RESULT' value '0'
OPatchInstall: Property 'SYS.WIN.ARCHITECTURE' value 'X64'
OPatchInstall: Property 'SYS.WIN.PACKAGEPATH' value 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Property 'SYS.WIN.PLATFORM' value 'WINNT'
OPatchInstall: Property 'SYS.WIN.SHELLVER' value '6.1.7601.18429'
OPatchInstall: Property 'SYS.WIN.SPLEVEL' value '100'
OPatchInstall: Property 'SYS.WIN.SYSTEMLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.USERADMIN' value '1'
OPatchInstall: Property 'SYS.WIN.USERLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.VER' value '601'
OPatchInstall: End of all properties
OPatchInstall: Setting system property 'SYS.ARGS.LOGREADONLY' with value '1'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATH' with value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATHREADONLY' with value '1'
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.LOG' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'LOGPATH' to value '$(fullPath:SYS.ARGS.LOGPATH)'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.LOG' is equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: Setting property 'LOGPATH' to value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionExtractFile
OPatchInstall: CActionExtractFile::initFromElement starts
OPatchInstall: Will extract the file with ID '$(PATCH.FILEID.EULA)' to the path '$(PACKAGE.PATH.TEMP)\eula.txt'
OPatchInstall: CActionExtractFile::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionExtractFile::execute starts
OPatchInstall: Will extract the file with ID 'volumelicense_eula_postrtm_en-us.txt' to the path 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: Getting the data from the file 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Successfully retrieved the data location and size
OPatchInstall: CActionExtractFile::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: Executing CConditionBooleanOperator::evaluate
OPatchInstall: The property 'SYS.ERROR.INERROR' exists
OPatchInstall: The property 'SYS.ERROR.INERROR' is not equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.NOEULA.PROMPT' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.NOEULA.PROMPT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.PASSIVE' is equal to '0'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'PACKAGE.NOEULA.PROMPT' doesn't exist
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: CActionPromptEULA::execute starts
OPatchInstall: Running in full UI, will show the EULA dialog
OPatchInstall: Reading EULA from file 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: User Accepted the EULA, executing the Accept action list
OPatchInstall: Finished executing the Accept action list
OPatchInstall: CActionPromptEULA::execute ends
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListOr>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to ''
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to 'NONE'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptFolder
OPatchInstall: CActionPromptFolder::initFromElement starts
OPatchInstall: Will prompt the user with the title '$(PACKAGE.PROMPT.EXTRACTFOLDER)' and store the folder in 'PACKAGE.EXTRACT.FOLDER' if cancelled will set 'PACKAGE.FOLDER.CANCELED'
OPatchInstall: CActionPromptFolder::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.FOLDER.CANCELED' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.FOLDER.CANCELED' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17023'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLCANCELED)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionCreateFolder
OPatchInstall: CActionFile::initFromElement starts
OPatchInstall: Will check for file '$(PACKAGE.EXTRACT.FOLDER)'
OPatchInstall: CActionFile::initFromElements ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17024'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.EXTRACTFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ca-es.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ca-es.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt -
"An error occurred while trying to save your photo library..."
Installed iPhoto6.
Started app. It said it would take a few seconds or minutes to upgrade.
About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
"An error occurred while trying to save your photo library."
"Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
It seems very strange that 16 photos from the middle of the pack would survive.
It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
Anyone else have a better hunch at a root cause?
Anyone else have an idea of a cure?
Anyone else run into this?
It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)I'll check if I have copies of copies of copies. This could take a while due to the number of files.
I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
Ideas? At least I know I'm not the only G5 dual user with this problem!
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4) -
A network error occurred while trying to communicate with the server.
Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems. -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew
Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren -
Error occured while sending a form in test in HCM Process & Forms
Hi
An error occured while testing my process in Design Time Tool. All the process, form, and workflow are consistent and activated, however when I send the form in test program available in Design Time Tool I get a Short Dump (as below) followed by the error "Workflow Item Not Found, Workflow Not Started."
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_UNKNOWN
ABAP Program CL_POBJ_CASE==================CP
Application Component PA-AS
Date and Time 23.02.2012 09:38:34
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_POBJ_CASE==================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"CL_POBJ_CASE==================CP" or "CL_POBJ_CASE==================CM00D"
"IF_POBJ_CASE~CREATE_CASE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Looking forward to your expert advice to resolve this error.
Best regards
ImranThis can be a few things....
1. Make sure you set up your number range for CASE Mgmt (t-code SCASE_NUMBERANGE)
2. if the POBJ_MODEL is missing in your CASE Mgmt environment
3. if the doc id for your object models (process, scenario, case) are somehow "out of whack" (not matching) between CASE mgmt, SCASE_CUSTOMIZING and SRMREGEDIT
4. authorization issues (which it more likely is)... I know it sounds weird, but even giving you SAP_ALL will not do it (even it is missing some of the auth objects). You have to be able to read/write to CASE Mgmt (so the related auth objects are needed....look for ones with S_SRM* or S_SCM*). Also, WF-BATCH user needs this auth as well!
This part can be a PAIN to get sorted out. -
A network-related or instance-specific error occurred while establishing a connection to SQL Server.
Dear all,
I know that this topic may be a bit old school; but it really make me mad as I tried all solutions i found and it still cant be resolved....please give a hand...
The situation is like this,my company divided different platform as a status of project, like DEV, SIT and UAT. I got a project that require me to upgrade an vs2003 project to vs2005. I upgraded it completely and
successfully, it works fine in development and UAT platform; EXCEPT, the SIT platform.
The situation is very strange that, once I move the source to SIT, it return the following error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
but it never happen in either DEV or UAT platform and even do I copy the workable web.config from DEV or UAT platform to SIT, the error still here and unable to resolve it.
I search a lot in the internet by Google, but solution suggested are not suitable or fail in my case. Most answer suggest that "enable remote control", "check fire wall", "check server" etc......But as I can connect well the
DBServer in DEV and UAT properly, I dont think those are the cause(but still, I check them all, and all are enabled properly, except my firewall setting is OFF, so adding port is ignored).
After all the searching and testing, I believed and have reason to believe that, the cause is inside my web.config:
<appSettings>
<!-- User application and configured property settings go here.-->
<!-- Example: <add key="settingName" value="settingValue"/> -->
<clear/>
<add key="Environment" value="UAT v1.31"/>
<add key="DBServer" value="DB_UAT"/>
<add key="cnBPSS.ConnectionString" value="data source=DB_UAT\BPSS;persist security info=True;user id=theloginid;workstation id=RP_UAT;packet size=4096;pwd=theloginpwd"/>
<add key="UTBPSSConn.ConnectionString" value="data source=DB_UAT\BPSS;persist security info=False;user id=theloginid;workstation id=RP_UAT;packet size=4096;pwd=theloginpwd"/>
<add key="UTDSBDBConn.ConnectionString" value="workstation id=RP_UAT;packet size=4096;user id=theloginid;data source=DB_UAT\DSBDB;persist security info=False;password=theloginpwd"/>
<add key="cnDSBDB.ConnectionString" value="workstation id=RP_UAT;packet size=4096;user id=theloginid;data source=DB_UAT\DSBDB;persist security info=False;password=theloginpwd"/>
<add key="Timer1.Enabled" value="True"/>
<add key="Timer1.AutoReset" value="True"/>
<add key="cnbpss.ConnectionString" value="data source=DB_UAT\BPSS;password=theloginpwd;persist security info=True;user id=theloginid;workstation id=RP_UAT;packet size=4096"/>
<add key="cnbpss1.ConnectionString" value="data source=DB_UAT\BPSS;password=theloginpwd;persist security info=True;user id=theloginid;workstation id=RP_UAT;packet size=4096"/>
</appSettings>
</configuration>
I know such kind of setting is old school; But due to this program runs for few years from tons of ppl...I dont dare to modify it unless I am very sure they are the cause.....
May I ask if anyone cna give me some advice and help in this issue please? I already tried for weeks and turning mad....Please I really need some help...
Many thanks.
Ksun ChanChecklist of possible reason of this error
1. Check SQL services are running
2. Check SQL Browser service is running
3. Check remote connections are enabled
4. Network connectivity between database & application servers by TRACERT command
5. Check TCP/IP protocol enabled at SQL server
6. Check talent connectivity – telnet <IP address> <port no on SQL server running>
7. Check UDP port 1434 is open or not on SQL Server
8. Check firewall is running or not Check
9. If firewall running, SQL Server & UDP port must be added in exception in firewall
Regards,
Rohit Garg
(My Blog)
This posting is provided with no warranties and confers no rights.
Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
Hi friends, I have created a layout fo medruck for which i'm using the standard driver program. In one window i'm using the perform statement for collecting values from the program for which im using the itcsy structure intab & outab. Her
-
[CS3 JS] event crashes InDesign
Scripting ladies and gentlemen, I'm working on this event script that searches for linked PDF files and lets the user copy/relink them. Using the afterOpen eventListener however crashes InDesign no matter what I do. This is also the case with beforeC
-
I am trying to setup the iPad for a new user. I have entered the AppleID and password for the Game Center. I am trying to create a new account so it sends me to the Location to confirm my Country or Region then when clicking on Next it asks for Dat
-
Educational licensing question
Hello there, I'm currently teaching at a university, and I have the opportunity to buy some software with educational discounts. I'm located in Canada. I'n interested in purchasing the elearning suite. My question is: can this license be used in
-
Where are root certificate located in OS 10.6.8?
I have been using Outlook for my mail, as Mail has dropped several attachments and does not seem to be as reliable. However, I am receiving error messages informing me that the root certificates for my .me account are not trusted. I accessed Keycha