Error occured while uploading to ODS.

Hi,
error occured while uploading to ODS  from R/3........
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.

Hi varun,
thx's 4r reply
I already check it in st22 transaction..... it's showing short dump.
ShrtText
    Exception condition "NOT_EXIST" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
Error analysis
    A RAISE statement in the program "SAPLRSSM" raised the exception
    condition "NOT_EXIST".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
and  one more thing. i don't know about the locks can u plz clear about that locks......
when i enter the sm12 then its asking
Lock argument and table name
4r wht perpose these thing's
thank's in advance
regard's
venkat

Similar Messages

  • I'm uploading a photobook I made to be published.  I need assistance in getting it to apple.  The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading.  I have been trying all night.  Help!

    I'm uploading a photobook I made to be published.  I need assistance in getting it to apple.  The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading.  I have been trying all night.  Help!

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • Error occurred while uploading iPhoto book

    I have been trying to upload (buy) a photobook through iPhoto. It builds OK and seems to transfer all the data (60MB) then stops and displays an error message:
    "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file"
    Network is fine and I have tried the following suggestions:
    Rebuild iPhoto
    Throttle restricted upload (this seemed counter intuitive but the data tx seemed correct)
    Would appreciate any workable ideas.

    David (Apple Photo Services) wrote:
    If it helps I will also leave you with a few steps I have when it comes to errors in the account >stopping the purchases. If the steps Old Toad said did not help, I am hoping this is what it takes:
    A) Please delete your net services folder. To do so, please follow the path below:
    MacintoshHD ->Library -> Application Support -> NetServices
    Single-click on the NetServices folder and delete the entire folder.
    B) Make corrections in Apple Store
    1. Go to the Apple Store online and click Your Account in the navigation bar:
    http://store.apple.com/us
    2. Sign in using your Apple ID and password.
    3. Click "Change account information" on the right and sign in again.
    4. Verify or enter your Billing and Shipping address information.
    5. Delete your credit card information in the Method of Payment section, and then re-enter it. Do >not enter spaces in your credit card number. Click Continue.
    C) Next go back to iPhoto:
    1) Select the "Buy Book" button.
    2) Click on "Account Info" and then "Edit Billing information".
    3) Change the type of card, and then blank out the remaining fields: card number, security code, >and expiration date.
    4) Click "Save".
    5) You should then receive an error that you will need to fill in those fields.
    6) Complete all the fields again and click "Save".
    Subsequently, please attempt to submit your order.
    Thank you for your patience in this matter. I hope to hear from you soon.
    Sincerely,
    David H
    Apple Photo Services Customer Support
    http://www.apple.com/support/photoservices/ww/
    Thanks OT. I've done this with no improvement, David H from Apple suggested a similar solution. 
    I've since copied the iPhoto library to the MacBook Pro and tried to upload from there. I'm now getting a billing error so think I must have made an error when I re-typed. Trying again....
    mrtotes

  • An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file

    Just for the record:
    I had received the error message "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file" after all data apparently had been uploaded.
    After trying everything recommended on the internet, I finally found the culprit: Glimmerblocker, an ad blocker!
    (GlimmerBlocker version 1.4.16, Mac OS X 10.7.2 Lion)
    Actually, the credit goes to the very patient German Apple support: they had finally asked me: "what software have you installed lately" ... a big applause to the guys there!
    Best,
    Gabriel.

         In our case, it was not third party software, but a problem with our router not accepting pings.  If you are using a router be sure to set-up Enable WAN Ping Respond,  in the advanced settings.  I reviewed my wireless router's logs and found that it was blocking ICMP Type 3 packets from Apple's server.  As a result, it would give the message, "An error occurred while uploading one of your files.  Please check your network connection and click Retry to resend your file."  You can find the blocked packets in your log based on the time you clicked the buy button for your iPhoto purchase (in my case about a dozen times).  If your packets are blocked, then that is your problem.
         I should have suspected it was the connection since the message plainly said, "...check your network connection...".  However, I discounted this along with so many others based on the forums, since I could connect to the internet.  If there only was a way the message could have gave a little more saying, "Enable your WAN Ping Respond now, or else!"
    Good fortune on your road to Macenlightenment!

  • IPhoto cards: "An error occurred while uploading one of your files."

    Hey, all.
    I've been trying to print some cards via iPhoto (version 6.0.6) but, while some are successful on the first attempt, others just keep generating the following error message no matter how many times I try them: "An error occurred while uploading one of your files."
    I'm at a loss. They assemble fine. They connect fine. They transfer fine. Then I just get this irritating message over and over and over...plus my credit card company keeps calling about "unusual activity" (which would be the multiple "pending" charges for the same dollar amount that each of these tries generate).
    I've tried searching these forums and, while others seem to have had this problem, I've yet to read an actual solution.
    And I've tried contacting Apple but they've been, in a word, useless. Polite, but useless.
    Any suggestions?
    Thanks!
    Message was edited by: theshadowalker

    theshadowwalker
    like, say, panning the image
    What do you mean by "panning"? The only time I've heard this term is with video, referring to moving the camera from right to left. So, if you can explain how what you mean by this it might help.
    While there are reports on this forum about folks having issues uploading, compared to the sheer volume of photo orders Apple process it's quite a small amount, and certainly not enough to suggest a systemic fault.
    And I'd already tried removing the pictures and cards from iPhoto, then halving the pictures' size (MB) in Photoshop, then recreating the whole lot from scratch. Still, no effect.
    Can you explain how you did this? What interaction have you set between iPhoto and Photoshop?
    Other than that: Start with the troubleshooting basics:
    1. Repair Permissions using Disk Utility
    2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    4. What color profile are these images? Have they been processed in Adobe Lightroom or other software before iPhoto? What's the source of the images - Camera? Scanner? Other?
    Regards
    TD

  • TS1135 Cannot process the Photo Book; it fails always at the very last stage with "error occurred while uploading on of your files. Pls check your network connection and click Retry..." Tried at 12 times and no joy!  Can anyone help?

    Can anyone help with the Photo Book process?  I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process.  I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files.  Please check your network connection and click Retry to resend your files."   It fails every time, any advice?  My server is TalkTalk which may explain everything !! ??   Help.

    Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there. 
    Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors.  Keep that file to compare with the printed copy when it arrives.
    OT

  • Error occurred while uploading book to blurb

    Hi,
    I have sent dosens of books to blurb via lightroom without any issue, but I am getting the following error message
    "an error occured adding text and fonts to book"
    Anyone had this issue, and have any remedy to it? I have tried changing the layouts and fonts without success. I have the same issue when generating a pdf. I have just sent some other albums to blurb with no issue its only with this particular project, it also wont generate pdfs but will generate it as jpegs.
    Any help would be amazing as I dont want to have to redo this album!!!
    Cheers,
    Paul

    Just changed the font AGAIN, this time to Arial, and its now working... bizarre. So if anyone else has this issue, just keep hitting send lol!!!

  • Error occured while uploading the data for Tocde QP01 (BDC)

    Hi,
    I am facing a strange problem i.e. when i try to upload the data for the Tcode QP01 i am able to upload the data for the 18 rows but when it is more than 18 ,it gives the following error and saves the data upto 18 rows only :-
    CALL_TRANSACTION QP01 returncode:     0  RECORD:          0
    S Field RC27X-FLG_SEL . not found in loop of screen SAPLCPDI 1400
    S Cursor field PLMKB-VERWMERKM (18) does not exist in the screen
    S Field PLMKB-VERWMERKM (18) does not exist in the screen SAPLQPAA 0150
    S Field PLMKB-STICHPRVER (18) does not exist in the screen SAPLQPAA 0150
    S Inspection plan with plan group 12775 for material 200999 is saved
    Is there any way to solve this problem...

    hi,
    Ok,i agree with you but the thing is it was allowing to upload the data for more than 18 rows as there was logic written. It is specified in the code:-
    ELSEIF itab1-serial > 18 AND itab1-serial < 35.
                  IF index = 19.
                    index = 2.
                  ENDIF.
    Edited by: nav009 on Sep 9, 2009 8:25 AM

  • An unknown error occured while uploading the attachment. I am using Acrobat Reader DC

    I have been having this problem for a couple of months now. I just downloaded the latest version and it still will not let me send an attachment using the email icon on the top of the page

    Does that happen immediately after you click the email icon, or do you get a dialog like this first
    What is your operating system?  Email client?

  • I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

  • "an error has occurred while uploading one of your files "

    Using iLife '06, I've completed a book in iPhoto. I'm trying to buy it -- it goes through the assembling process and right before it's finished it says:
    "an error has occurred while uploading one of your files"
    But no other explanation is given. Same thing over and over and it always happens right beofre it finishes.
    Any ideas what's causing this?

    I can't tell you whats wrong but all i do is reboot iphoto, or worst case, restart the mac. and the next time it goes through like a whiz. I placed orders for 24 separate books this week and i have had everything imaginable go wrong but almost everything worked after restaring iphoto.....corrupt file, cannot authenticate user, cannot get credit card approval, problem with file transfer. Don't bother to use the RETRY button. email support was courteous and within 48 hours for other matters not solved by restarting.
    Van
    Using iLife '06, I've completed a book in iPhoto. I'm
    trying to buy it -- it goes through the assembling
    process and right before it's finished it says:
    "an error has occurred while uploading one of your
    files"
    But no other explanation is given. Same thing over
    and over and it always happens right beofre it
    finishes.
    Any ideas what's causing this?

  • TF255424: An error occurred while installing SharePoint Products. (SharePoint 2012)

    I want to install both SQL Server and Team Foundation Server on the same machine. Operating system of my server machine is Microsoft Windows Server 2008 R2 Service Pack 1. I first install Microsoft SQL Sever 2012 Enterprise edition without any error. After
    that i tried to install Microsoft Team Foundation Server 2012. Team Foundation Server configuration got complete. Microsoft SharePoint Foundation 2010 installed successfully but while configuring SharePoint extension i am getting the following error.
    "TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010."
    Please help.
    [Info   @12:19:36.259] 
    [Info   @12:19:36.259] +-+-+-+-+-| Environment |+-+-+-+-+-
    [Info   @12:19:36.260] Environment: FullEnvironment
    Setup: 
    InstallPath: C:\Program Files\Microsoft Team Foundation Server 11.0\
    IsTfsExpress: False
    ToolsPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
    ApplicationTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier
    BuildTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
    ProxyPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Version Control Proxy
    SetupUser: ETS-WEBAPP\tfsadmin
    WebServicePath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier\Web Services
    LicenseEdition: PID_RANGE_VL
    SystemTfsTemp: C:\Windows\Temp\TFSTemp
    SharePointInstallTemp: C:\Windows\Temp\TFSTemp\WSSInstall
    InstalledLanguages: System.Collections.Generic.List`1[System.Int32]
    InstalledLanguagesString: 1033;
    OS: 
    MachineName: ETS-WEBAPP
    HostName: ETS-WEBAPP
    IsClientOS: False
    IsServerOS: True
    IsDomainController: False
    IsMachineInWorkgroup: False
    IsMachineInDomain: True
    IsHomeEdition: False
    IsUnsupportedEdition: False
    Version: Server2008R2
    MajorVersion: 6
    MinorVersion: 1
    ProcessorCount: 4
    ServicePackMajor: 1
    ServicePackMinor: 0
    IsOSPostTfsRelease: False
    VisibleMemoryMB: 12287
    AdjustedMemoryGB: 12
    Iis: 
    IsInstalled: True
    PreviouslyFailedConfig: False
    RequiredIisFeaturesInstalled: True
    OS: 
    MachineName: ETS-WEBAPP
    HostName: ETS-WEBAPP
    IsClientOS: False
    IsServerOS: True
    IsDomainController: False
    IsMachineInWorkgroup: False
    IsMachineInDomain: True
    IsHomeEdition: False
    IsUnsupportedEdition: False
    Version: Server2008R2
    MajorVersion: 6
    MinorVersion: 1
    ProcessorCount: 4
    ServicePackMajor: 1
    ServicePackMinor: 0
    IsOSPostTfsRelease: False
    VisibleMemoryMB: 12287
    AdjustedMemoryGB: 12
    Sql: 
    SqlInstance 0: 
    Name: MSSQLSERVER
    FullName: ETS-WEBAPP
    Edition: Enterprise Edition
    Version: 11.0.2100.60
    IsWow64: False
    LCID: 1033
    IsExpressEdition: False
    IsFullEdition: True
    IsSupported: True
    IsSharePointSupported: False
    IsUpgradable: False
    WindowsServiceName: MSSQLSERVER
    SharePoint: 
    IsInstalled: True
    IsProvisioned: False
    IsAdminDbConfigured: False
    IsAdminSiteConfigured: False
    IsRunningSiteOnWebAppPort: False
    Version: 14.0.6029.1000
    WssAdminUrl: http://ets-webapp:17012/
    WssSiteUrl: http://ets-webapp/sites
    ReportingServices: 
    IsInstalled: True
    DefaultInstance: 
    InstanceIdentifier: ETS-WEBAPP
    HostName: ETS-WEBAPP
    InstanceName: MSSQLSERVER
    ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
    IsConfigured: True
    ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
    ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
    Instances[0]: 
    InstanceIdentifier: ETS-WEBAPP
    HostName: ETS-WEBAPP
    InstanceName: MSSQLSERVER
    ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
    IsConfigured: True
    ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
    ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
    PowerTools: 
    IsBackupToolConfigured: False
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| Configuration Plan |+-+-+-+-+-
    [Info   @12:19:36.260] - ContainerTask (ContainerNode) : root
    - ConditionalTask (ConditionalNode) : Provisioning SharePoint
    - ContainerTask (ProgressNode) : Configure SharePoint
    - ConfigureSharepointProvision (ConfigureNode, 208) : Configuring the SharePoint Products
    SqlInstance = ETS-WEBAPP
    AdminSiteAccountName = Domain\tfsuser
    PasswordSupplied = *****
    SiteUrl = http://ets-webapp/
    AdminPort = 17012
    TfsServiceAccount = Domain\tfsuser
    - ContainerTask (ProgressNode) : Extending SharePoint
    - ConfigureSharepointUploadData (ConfigureNode, 209) : Uploading solutions and templates ...
    - ConfigureResetSPTimer (ConfigureNode, 214) : Resetting Sharepoint Timer Service ...
    - ConfigureIisReset (ConfigureNode, 801) : Resetting IIS ...
    - ConfigureMarkFeature (ConfigureNode, 140) : Marking feature configured status
    FeatureType = SharePointExtensions
    IsConfigured = True
    - ConfigureWssHealthCheck (ConfigureNode, 210) : Check if sharepoint is responsive
    SiteUrl = http://ets-webapp/
    - ConditionalTask (ConditionalNode) : SharepointEntries
    - ContainerTask (ProgressNode) : Configuring Services
    - ConfigureAddSharePointEntries (ConfigureNode, 207) : Configuring SharePoint application entries
    SharepointRootUri = http://ets-webapp
    SharepointAdminUri = http://ets-webapp:17012/
    DefaultSharePointPath = sites
    ApplicationTierUri = http://ets-webapp:8080/tfs
    ApplicationTierServiceAccount = NT AUTHORITY\NETWORK SERVICE
    - ConfigureAddAccountToLocalWss (ConfigureNode, 800) : Add account to WSS farm admin group
    Account = NT AUTHORITY\NETWORK SERVICE
    AdminUrl = http://ets-webapp:17012/
    UseRetainedSettings = False
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| Running root: root |+-+-+-+-+-
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| root |+-+-+-+-+-
    [Info   @12:19:36.260] Starting Node: CONTAINER
    [Info   @12:19:36.261] NodePath : Container
    [Info   @12:19:36.261] Node returned: Ignore
    [Info   @12:19:36.261] Completed root: Ignore
    [Info   @12:19:36.261] -----------------------------------------------------
    [Info   @12:19:36.261] 
    [Info   @12:19:36.261] +-+-+-+-+-| Running Provisioning SharePoint: Provisioning SharePoint |+-+-+-+-+-
    [Info   @12:19:36.261] 
    [Info   @12:19:36.261] +-+-+-+-+-| Provisioning SharePoint |+-+-+-+-+-
    [Info   @12:19:36.261] Starting Node: CONDITION
    [Info   @12:19:36.261] NodePath : Container/Conditional
    [Info   @12:19:36.261] Node returned: Ignore
    [Info   @12:19:36.261] Completed Provisioning SharePoint: Ignore
    [Info   @12:19:36.261] -----------------------------------------------------
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Running Configure SharePoint: Configure SharePoint |+-+-+-+-+-
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Configure SharePoint |+-+-+-+-+-
    [Info   @12:19:36.262] Starting Node: CONTAINER
    [Info   @12:19:36.262] NodePath : Container/Conditional/Progress
    [Info   @12:19:36.262] Node returned: Ignore
    [Info   @12:19:36.262] Completed Configure SharePoint: Ignore
    [Info   @12:19:36.262] -----------------------------------------------------
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Running ConfigSPProvision: Configuring the SharePoint Products |+-+-+-+-+-
    [Info   @12:19:36.263] 
    [Info   @12:19:36.263] +-+-+-+-+-| Configuring the SharePoint Products |+-+-+-+-+-
    [Info   @12:19:36.263] Starting Node: CSPPROVISION
    [Info   @12:19:36.263] NodePath : Container/Conditional/Progress/CSPPROVISION
    [Info   @12:19:36.263] 
    [Info   @12:19:36.263] +-+-+-+-+-| SharepointProvision::ConfigureDatabase |+-+-+-+-+-
    [Info   @12:19:36.263] Configuring the SharePoint Products database ...
    [Info   @12:19:36.263] SharePoint Products::ConfigureDatabase
    [Info   @12:19:36.263] GrantLogOnAsAService is called. User name: tfsuser [Info   @12:19:36.269] Checking if Authenticated Users group is a member of Users group.
    [Info   @12:19:36.272] sid = S-1-5-4
    [Info   @12:19:36.272] sid = S-1-5-11
    [Info   @12:19:36.272] sid = S-1-5-21-1481031050-1694664162-2121907377-513
    [Info   @12:19:36.272] sid = S-1-5-21-1529747324-2324938602-2105273467-1015
    [Info   @12:19:36.272] Authenticated Users group is a member of Users group.
    [Info   @12:19:36.300] C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe
    [Info   @12:19:36.300] -o setconfigdb
    [Info   @12:19:36.300] -databaseserver ETS-WEBAPP
    [Info   @12:19:36.300] -farmuser domain\tfsuser
    [Info   @12:19:36.300] -farmpassword ********
    [Info   @12:19:36.300] Process starting: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword ****************
    [Info   @12:20:04.869] Process finished: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword **************** exitCode=-1
    in 28566 ms
    [Info   @12:20:04.869] 
    [Info   @12:20:04.869] WARNING: SharePoint no longer customizes Integrated Authentication security settings. This Web application may be using Kerberos, which can require manual configuration. See "http://support.microsoft.com/?id=832769" for
    more information.
    [Info   @12:20:04.869] 
    [Error  @12:20:04.869] An error occurred while getting information about the user tfsuser at server telenor.com.pk: Access is denied
    [Error  @12:20:04.869] 
    [Info   @12:20:04.869] ReturnCode=-1
    [Info   @12:20:04.874] Node returned: Error
    [Error  @12:20:04.874] TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010. 
    [Info   @12:20:04.874] Completed ConfigSPProvision: Error
    [Info   @12:20:04.874] -----------------------------------------------------
    [Info   @12:20:04.880] Execution results:
    [Info   @12:20:04.880] Overall result: Failure
    [Info   @12:20:04.880] Nodes completed: 1
    [Info   @12:20:04.880] Nodes succeeded: 0
    [Info   @12:20:04.880] Nodes skipped: 0
    [Info   @12:20:04.880] Nodes with errors: 1
    [Info   @12:20:04.880] Nodes with warnings: 0
    [Info   @12:20:04.880] Number of error messages: 1
    [Info   @12:20:04.880] Number of warning messages: 0
    [Info   @12:20:04.880] Number of info messages: 0
    [Error  @12:20:04.881] Activity failed.
    [Info   @12:20:04.881] Configuration failed. Unconfiguring.
    [Info   @12:20:04.885] Setting the IsConfigured flag for feature SharePointExtensions to False.
    awias

    looks like here is the your problem "An error occurred while getting information about the user moss.service
    at server telenor.com.pk: Access is denied"
    try to add the user into the managed account via powershell. the user you trying to configure it.
    or change the user to some body else here is culprit account "telenorpk\moss.service"
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • An error occurred while trying to access the service?

    I'm trying to convert a PDF into Excel but I get the message 'an error occurred while trying to access the service'.
    I have tried logging into my Adobe account online and doing it within there, but once I have exported the file and pressed 'convert' it simply says 'conversion failure' with no explanation.
    My subscription is still valid, so I don't see why the problems?  Has anyone else had this issue and managed to fix it?  I get the error message regardless of whether I'm trying to convert to Word or Excel.
    Any ideas greatly appreciated!!
    Thanks
    Sophie

    Hi SHurcs,
    I'm sorry that you're having such trouble with your ExportPDF subscription. Does this error occur for one particular file, or with any file that you try to convert? What operating system and browser are you using?
    To get us started, here are a few things that you can try:
    In Reader, sign out, and then sign back in.
    Use a supported web browser:  http://www.adobe.com/acom/systemreqs/
    Clear the browser cache.
    If you're using a networked computer, make sure that there are no firewall/proxy settings that prevent you from uploading files to the Internet.
    Make sure that the files you're trying to convert are within the file-size limits for ExportPDF (100 MB).
    If the problem persists, please let us know, and tell us a bit more about the files that you're converting.
    Best,
    Sara

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Error occured while sending a form in test in HCM Process & Forms

    Hi
    An error occured while testing my process in Design Time Tool. All the process, form, and workflow are consistent and activated, however when I send the form in test program available in Design Time Tool I get a Short Dump (as below) followed by the error "Workflow Item Not Found, Workflow Not Started."
    Category               ABAP Programming Error
    Runtime Errors         MESSAGE_TYPE_UNKNOWN
    ABAP Program           CL_POBJ_CASE==================CP
    Application Component  PA-AS
    Date and Time          23.02.2012 09:38:34
    Short text
    Message type " " is unknown.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_POBJ_CASE==================CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    Only message types A, E, I, W, S, and X are allowed.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_UNKNOWN" " "
    "CL_POBJ_CASE==================CP" or "CL_POBJ_CASE==================CM00D"
    "IF_POBJ_CASE~CREATE_CASE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    Looking forward to your expert advice to resolve this error.
    Best regards
    Imran

    This can be a few things....
    1. Make sure you set up your number range for CASE Mgmt (t-code SCASE_NUMBERANGE)
    2. if the POBJ_MODEL is missing in your CASE Mgmt environment
    3. if the doc id for your object models (process, scenario, case) are somehow "out of whack" (not matching) between CASE mgmt, SCASE_CUSTOMIZING and SRMREGEDIT
    4. authorization issues (which it more likely is)... I know it sounds weird, but even giving you SAP_ALL will not do it (even it is missing some of the auth objects). You have to be able to read/write to CASE Mgmt (so the related auth objects are needed....look for ones with S_SRM* or S_SCM*). Also, WF-BATCH user needs this auth as well!
    This part can be a PAIN to get sorted out.

Maybe you are looking for