Error Occures while loading data from Source system to Target ODS
Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,
Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141
Similar Messages
-
I have set-up an ECT in SPD2013 on SP2013. It is a SQL Data source called ProjectWebApp. I have BCS/SSS set-up. I can create an ECT OK in SPD. I can add the ECT to a custom list.
The problem is when I add a new item in the list the following error message appears in red
An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
I cannot filter or return any results. There is data in the DB.
Another test I do is to try and create a new App/List using the "External List" template. When
I select the ECT a red message appears "External Content Types are not available". which is odd since I can add an ECT to a list as mentioned above.
Any ideas?
Tx
Andrew
Andrew PayzeHi Andrew,
Please try the option Allow unlimited length in document libraries in the column settings:
http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
Please provide error message in ULS log for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
Today I accepted the latest upgrade to my iPhone software.
Since it installed, it will not sync.
It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone." After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
Has anyone else run into this Undocumented Feature of the latest upgrade?
As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
Thanks to anyone who can help!
Steve CallenderTried rebooting the phone, and now it works.
Guess there's 2 lessons here -
Boot again when installing new SW, even if the phone reboots itself during installation, and
Boot to see if that fixes a problem before posting it.
Steve -
Error in Process Chain while extracting data from source system
Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada. -
Error message while loading data from data mart
Please can some one help on this.
While loading data from one cube to another (I am actually creating a backup of original cube) for 1 record I am getting the error message " internal error occured with time split" The long text of error message says Message no. RSAU101Take a look at this thread:
Internal error occured with time split
Hope it helps,
Gilad -
Error occured in the data selection while extract data from Source system
Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With errorHi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star -
Exception 'CX_SY_NO_HANDLER' occured while loading data from EKKO
Hi Friends,
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_SY_NO_HANDLER', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled
locally, nor declared in a RAISING clause
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_OPEN_SQL_DB", which was raised in the program
"CL_RSODSO_SEMANTIC_PACKETIZER=CP",
specifically in line 79 of the (include) program
"CL_RSODSO_SEMANTIC_PACKETIZER=CM002".
The cause of the exception was:
The database returned a value containing an error
Can you please help?
Best Regards,
DeepinderHi Gokhan,
Really could not get that.
I got that error while I load data from PSA to the DSO.
-Deepinder -
System slow during loading data from source system
hi,
I am trying to load master data from r/3 into bw in quality envirnoment by means of a process chain. The problem is it being a master data load is consuming a lot of time. My development and quality environments are maintained on the same server. I doubt about this being something related to memory. If anybody could mention the ways through which memory can be monitored along with the reason for the slow nature of the system would be very helpful.
Source system: R/3.
Environment : Q03(quality)
Load : Master data(full load)Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
Thanks,
JituK -
Error occure while importing data from 9i enterprise to 10g Express Edition
Hi,
Iam trying to import data from Oracle 9i(9.2.0.1.0) Enterprise Edition to Oracle 10g Express Edition ,
non partitioned tables are imported successfully but partitioned tables are not imported.I got the following error message.
IMP-00017:following statement failed with oracle error 439.
IMP-00003:Oracle error 439 encountered.
ORA-00439:feature not enabled:partitioning.
Plz help me to solve above error.i am sorry the errors are
imp-00019
imp-00003
ora-12899
i am using database 10g express universal edition
in 9i
select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AR8MSWIN1256
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 9.0.1.1.1
but in 10g express universal edition
select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0 -
Began when Apple replaced my HD on my iMac. I can backup without any problems but when it is time to sync, I get this error.
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
While loading data from r/3 to bw error 8 /error in source system is coming
while loading data from r/3 to bw error 8 /error in source system is coming . how can i solve this problem .
Check source system connectivity.
Tcode RSA1 --> Source System RClick --> 'Check' -
An error occurred while loading the model for the item or data source 'EntityDataSource'.
Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan KumarI'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem! -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support
Maybe you are looking for
-
3Gs No Longer Recognized in Third Party Software
For years now I've plugged my iPhone 3Gs into my Mac and downloaded the images and video from it into programs like Photomechanic, Adobe Lightroom, Image Capture, etc... Sometime within the past 3 months this functionality has quit. None of the above
-
Can an iPhone 5 purchased in the us work in the uk?
Can an iPhone 5 purchased in the us work in the uk?
-
Hello folks, Guys i need few of the user defined functions which are mostly created and used by you guys which performing the mapping. I have the basic understanding of what actually is a user defined function and the types of functions in it. It wou
-
Hi I have a db adapter which is executing the query below. It takes 3 parameters (startdate,enddate and username) and get some data. When i call this service it generates a timeout error. However when i check logs i saw that it gets the results of qu
-
App will only install using AIR 1.5.3
I recently packaged and signed an application using the AIR 1.5.3 SDK. The app will now only install if the user has AIR 1.5.3, and fails with 1.5.2, 1.5.1, etc. The application namespace is AIR 1.5, not 1.5.3. This is an application update, though i