Error occuring when submitting Active Users request in R12 on Solaris 5.10
Hi,
For a cloned environment, while submitting the active Users request it is completing with error. Below is the log file. Please help
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
There was an error trying to initialize the HPI library.
Please check your installation, HotSpot does not work correctly
when installed in the JDK 1.2 Solaris Production Release, or
with any JDK 1.1.x release.
Error occurred during initialization of VM
Signal chaining not allowed for VM interrupt signal, try -XX:+UseAltSigs.
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 720610.
Review your concurrent request log and/or report output file for more detailed information.
Thanks,
Anand
Hi Anand;
Please check below metalink note:
There Was An Error Trying To Initialize The Hpi Library When Running Any Concurrent Reports [ID 836237.1]
Regard
Helios
Similar Messages
-
Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
MohammedHello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai -
Error occured when giving down payment request through Tcode F-47
Dear All,
Following error occured when giving down payment request through Tcode F-47 by
inserting purchase contract in Purch. Doc. field :
Purch. doc. 4600000442 neither a purch. order nor a schedul. agmt.
Message no. ME703
please suggests
Regards
ShaileshHi
As error message states, you should put PO number instead of Purchase Contract number in downpayment request.
You can create a PO for that Purchase contract if you want purchase contract should also be used in that process.
Brgds
Abdulla -
Encoding error message when submitting form to REST endpoint
When submitting a stand-alone form to the REST endpoint of a process I receive the following message in Acrobat reader (translated from german):
"An error occured when submitting the form. Content of type text/plain;charset=utf-8 could not be processed"
Despite the error message the process gets started and works fine.
In terms of usability I would like to get rid of this error message since it irritates the ordinary user.
This happens only in Acrobat Reader (version is 10.1) not in Pro
My workbench version is 10.0.1The No Content approach should work. Can you show the exact code you're using to generate the response? Did you add "#FDF" to the end of the URL for the submit form action?
If you haven't looked into it already, consider returning an FDF that causes a popup dialog to display as a way of providing feedback. -
Internal error occured when writing
Hi all
I successfully imported an APO planning area into the quality systems, however the same request ends with error 12 in the production system. Landscape is SCM 5.0 sp8 with BI 7.0 sp12. When i checked the import job RDDEXECL (user DDIC), it shows:
Date Time Message text Message class Message no. Message type
07/08/2007 00:02:57 Job started 00 516 S
07/08/2007 00:02:57 Step 001 started (program RDDEXECL, variant , user ID DDIC) 00 550 S
07/08/2007 00:02:57 All DB buffers of application server <server_name> were synchronized PU 170 S
07/08/2007 00:03:17 <b>Internal error occurred when writing</b> D0 054 E
07/08/2007 00:03:17 Job cancelled after system exception ERROR_MESSAGE 00 564 A
I thought there will be an ABAP dump, I found this internal error (in bold in the log above). I tried searching for info on this but no help, it does not says error writing to what? Please help.
Thanks
AliIt seems a syncronization problem..
You can create a customer message providing the following information:
1. The symptoms that occurred
2. The highest Support Package
3. The current SAP_BASIS Support Package level
4. The queue that is currently selected
Header Data -
The following error occured when searching for on-premises exchange server
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter RalphsThanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter -
Active Users Request is still running for hours in Release 12
Hi Friends,
Today I have installed the Release 12 in the Red Hat AS 4.0. Installation was successfull.
All the Concurrent Managers are up and running.
I have run some requests in the Paybles, Receivable..
Requests are running for hours..all are standard reports...
even
Active Users Request is running for hours..there is no end...
Friends...
How to trouble shoot it???????????
Please give me advice...
Regards,
SubbuHi,
Thanks for the reply......
Is this a fresh installation? If so, what version? Which OS?
Ans: Yes This is a fresh installation...After InstallationAll concurrent Managers are up and running...
Was this working properly before? If so, what modifications have you done?
Ans: As this is a fresh installation. This is first time to run the requests. After installation, when i run the requests, I got error like libmawt.so is not opened. I have given libmawt.so file path in the LD_LIBRARY_PATH. After setting libmawt.so in the LD_LIBRARY_PATH. this time I did not before error. but request is running for hours..there is no end.
Have you tried to recover the CM from OAM?
Ans: ya, I tried, but not helpful.
Tracing should be helpful, did you try to run CM Diagnostics test?
If you shutdown the CM and submit the request, what do you get?
Ans: I got status as Inactive and no manager
This is the error in the my manager log file
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on.
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-01005: null password
given; logon denied
I tried to relink FND executables using adadmin. But it did not sovle out my problem. As this is solution in metalink for above error.
My Version is : Release 12 on Red Hat AS 4.0
Regards,
Subbu -
OER Applet Error - A non-fatal error occurred when fetching an entity id
Suddenly I have a problem when I want to run 'graphic representation of related items' applet from Oracle Enterprise Repository 11.1.1.2. Thinkmap console shows up wit following message:
Error: A non-fatal error occurred when fetching an entity id : : Remote Error: Login required to view information.
Error: A non-fatal error occurred when loading entities : : Remote Error: Login required to view information.
Error: cannot set initial center entity : java.lang.NullPointerException
I suspect it's some issue with JRE, since everything worked fine few weeks ago. I've also tried to downgrade to JRE 1.5, but I still get the same error. I've tured on debugging and in java console I get this:
Trace level set to 5: all ... completed.
basic: Starting applet teardown
basic: Finished applet teardown
basic: Added progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@16aa42e
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 762277 us, pluginInit dt 123357325 us, TotalTime: 124119602 us
+network: Cache entry not found [url: http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp, version: null]+
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp requesting to set-cookie with "JSESSIONID=tbGzMsGDKnnn5pRnK9B9vT1TMf7PKLljxnpJHjVBcQLpnLLBnlhf!835222537; path=/; HttpOnly"
basic: Applet initialized
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@16aa42e
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
basic: Applet started
basic: Told clients applet is started
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/thinkmap/my.tas requesting to set-cookie with "JSESSIONID=GVQ8MsGDGTzVGyQTn81n2wQ6hsLJB1p0GBwQD8VhnJJKhr3glNdt!835222537; path=/; HttpOnly"
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/thinkmap/my.tas requesting to set-cookie with "JSESSIONID=LdmyMsGDmRt4CQlw6KKxprRVF0KGMXxjpr38h2dRnYGnTNp2jx5J!835222537; path=/; HttpOnly"
Browse tree doesn't work either..message in Java console is:
+network: Cache entry not found [url: http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100®istrationstatus=100&target=results, version: null]+
network: Connecting http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100®istrationstatus=100&target=results with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100®istrationstatus=100&target=results with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100®istrationstatus=100&target=results requesting to set-cookie with "JSESSIONID=HxQCMsKTpGpv3Wrr2vhqHWK06pDR4tpk6QjC1BWJyYSsP7TwLvlJ!835222537; path=/; HttpOnly"
Anybody has an idea what is wrong and how to resolve this problem.
Thnx in advance.
Edited by: Teki on 7.7.2010 10:19I figured out what is causing this problem: When connecting OER with LDAP according to documentation (http://download.oracle.com/docs/cd/E15523_01/doc.1111/e16580/extauth.htm#CEGHHGAG ) you have to disable cookie login functionality. Now i figured that 'graphic representation of related items' and 'browse tree' applets are not working if there is no cookie for user. So in order for those two applets to work I have to enable enterprise.security.cookielogin.allow and enterprise.authentication.ldap.enabled (or manually check the Enable automatic Login box).
Is there any other setting or workaround that would ensure that mentioned applets would work properly without enable automatic login option checked?! And what is the problem if I do have LDAP authentication and cookie login enabled (why is explicitly stated in documentation that I should disable cookie login with LDAP authentication?) Can someone from Oracle clarify this please?
Edited by: Teki on 7.7.2010 11:43 -
PL/SQL: ORA-04052: error occurred when looking up remote object.
Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
KanchanaHi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009* -
I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air. When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules". Any ideas please?
A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020 -
Error in executing ABAP program. Error occurred when creating dataset
hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for helpr u able to figure it out..........i got the same error .......can someone help me fix this issue
-
A critical program error occured when running a workbook
Some end users get a critical program error occured when running a workbook when they want to make selections.
In the trace they get the following message
System.ArgumentException: Item has already been added. Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6" Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
This happens only on some PC clients !
Thanks for any help !
IvanHi Vid,
Thanks for your suggestion.
I am using a different patch i.e.
BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
and it helps to solve my problem.
Cheers. -
AAMEE 3.1.105.0 generated packages run fine when pushed to Macs that do not have an existing previous version of CS.
However, if pushed to a Mac that has CS4 installed, CS6 installs but Acrobat Pro X will not launch ("Internal error occurred").
We are using the latest Adobe CS6 Design & Web Premium installer DMGs from licensing.adobe.com and we are following the standard workflow.
I know Adobe's position is "We don't recommend or support concurrent installs of Creative Suite" (I get that).
Since OS X lacks package management (ala Yum, RPM, etc.), the term "Uninstall" is vague, but we appreciate Adobe's "cleaner tool".
Unfortunately the "cleaner tool" is only marginally effective, it leaves a mess behind.
And...when "cleaner tool" is used to remove CS4, it whacks CS6.
Wait...it gets worse...when "cleaner tool" is used, we now can't push our CS6 package to the Mac...we get...<drumroll>..."Internal error occurred" when launching Acrobat Pro X.
Someone shoot me...please put me out of my misery.
Why can't deploying CS6 be as simple as...
http://www.toysrus.com/product/index.jsp?productId=3938350&CAWELAID=479925582
DonOK, we resolved the issue. Apparently there was a ~/Library/ColorSync folder present, not owned by the logged in user, and the logged in user had no access. Given OS X's domain model, it looks like Acrobat Pro X looks at that folder when it launches, even though it doesn't need to, and it can't get into it, so it tosses up the error.
Removing the folder (since it's not needed) resolves the issue. If the folder was needed, we would change ownership and permissions so Acrobat Pro X could access it.
Problem solved.
Thanks,
Don -
An error occurred when attempting to change modules Lightroom 5 CC
I've seen other users pose this question but haven't seen any solutions that work for me. I get the error: "An error occurred when attempting to change modules" when I open up Lightroom 5 on one user, but on another user it opens up fine. I've tried moving and trashing preferences, uninstalling and reinstalling the program. It's the same whether I open an existing catalog or try to open Lightroom while creating a new project. Any help would be greatly appreciated. This occured after updating to Mavericks on a 2011 iMac. All other Creative Cloud apps seem to have installed just fine.
Hi 99jon,
Many thanks for that. Had been going through this list yesterday and now again today:
Ref Solution 1: Lightroom is at its latest update
Ref Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
Ref Solution 3: Lightroom doesn't allow me to do anything after the error message appears
Ref Solution 4: don't have any Nik Software plug-ins
Ref Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
Ref Solution 6: I don't have a different user account on my mac.
Not sure what else to do. -
An error occurred when attempting to change modules.
Loaded LR on my iMac, tried to copy & use a catalogue from W7 P/C. Now get "An error occurred when attempting to change modules." when opening LR. Tried a variety of on-line suggestions, HELP. NB too much hassle with all the other apps to start a new user with such as Adobe and Microsoft.
GeorgeHi, I¹ve been through it again to ensure I¹ve not forgot things. Completely
removed Lightroom and all files I can find, etc and reloaded. Some tedious
result. Step 6 is too time consuming at the moment for me, too many things
on the go since I¹m about to go on holiday and on return I shall need
Lightroom on this iMac. Any clues? This iMac had Mavericks from new,
uploaded to Yosemite and then loaded Photoshop CC, Lightroom etc and get
this damned problem.
Reading around the web I¹m not the only one with this issue, to suggest a
new user a/c is a soft option without resolving the issue.
I hope an expert from Adobe can resolve this,
Regards, George (retired IT Manager and IT Systems Project Manager)
Maybe you are looking for
-
Why can't I send Photos using Message on my Mac w Yosemite
I have just tried to send a photo, taken w my iPhone 6 and properly shared automatically to my MBP w/Yosemite. I cannot send it via email; I cannot send it via Messages. I checked for solutions re email; I use Postbox as my email client which may be
-
HOW TO COMPLETELY DISABLE PASSWORD IN MACBOOK PRO RUNNING MOUNTAIN LION?
i am quiet annoyed with my mac because everytime i want to isntall something it asks me for password i have deleted the password, now i dont have to type it anymore but simply have to press enter but is there any way to completely disable this thing?
-
How to access emails in windows mobile using java?
is there any facility in j2me to access email folders like inbox or sent in windows mobiles? Thanks in advance,
-
Tried updating to 11.4 Itunes and it says "key not valid for use in specified state"
when I tried to update ITunes to 11.4 I get an error message saying " key not valid for use in specified state" I tried uninstalling iTunes and downloading the new version but it still won't download. I also tried syncing my Iphone 6 and it wouldn
-
Updating TRDIR-UCCHECK for unicode conversion
Hi, We are currently performing a unicode conversion on our R/3 and BW systems. There are a lot of programs that DO NOT require changes to be unicode-compliant but don't currently have the TRDIR-UCCHECK flag turned on. I know that the UCCHECK trans