Error occurred during back up
"iTunes could not back up the iPhone "iPhone" because an error occured.
I recently brought my old Mac into the Apple store to have everything transfered over to my new Mac. When I plug my iPhone into my new computer I get this message. I try to back it up and it will not allow me. Could this have something to do with my recent transfer or does the problem relate to my iPhone itself? I tried restarting my computer and my iphone, neither worked to solve the problem. The last back up was 10 days ago before I got everything transfered. Help!
I tried deleting old back ups in the device tabs and no luck. Then i tried going into "MobileSync" and deleting those back ups thinking they may have been comprimised as well, and again no luck. The weird thing is that my other iPhone (From Canada) synced and backed up last night, but this one (from USA) will not. Im thinking my only option now is to restore this phone back to factory setting and then back it up using the back up from 10 days ago. I may lose a couple new contacts, but I can re-add them. Thoughts?? Any other suggestions?
Similar Messages
-
Error occurred during back-routing
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code><SAP:P1>,FileNET_BS</SAP:P1><SAP:P2>,R3D_301,,</SAP:P2><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Error occurred during back-routing
Error in communication channel
</SAP:Stack></SAP:Error>is this an IDoc scenario with acknowledgments configured?
refer SAP Note 832965 and also make sure your configuration is correct.
ref: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb -
IDOC to File --- Error occurred during back-routing Error in communication
Hi All,
I am doing a IDOC to File (File Content Conversion) Scenario in which I have mentioned the field separator and end separator.. When i trigger the IDOC, i am only getting the first field value in the output. I am getting the following error
"- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
<SAP:P1>,IHS_BS</SAP:P1>
<SAP:P2>,com_IHS_B07_BS,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>"
My port and receiver are mentioned in "IDXNOALE" so that I can ignore the Acknowledgments. Please help as the error still persists..
Thanks
AnjuTry this thread:
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5 -
When I try to activate my FaceTime, I get an error msg that says, "An error occurred during activation. Try again." I have a good password (I used it to get here...); I'm on WiFi; I've toggled FT off and back on again but I cannot get past the error message and get activated. What's wrong? Thanks. Talking about my iPhone (4).
Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.
-
Can't activate imessage on my daughters ipod touch 5th gen. Comes back with "An error occured during activation". It was working until I updated to latest IOS version 7.1.2. Managed to update Facetime ok but can't do anything with iMessage. Can anyone help?
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
m_fields = NewArrayList()
Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
Next i
'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
stream = File.OpenWrite("D:\MyTestReport2.rdlc")
Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
' Causes child elements to be indented
writer.Formatting = Formatting.Indented
' Report element
writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
writer.WriteStartElement("Report")
writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
writer.WriteStartElement("ReportSections")
writer.WriteStartElement("ReportSection")
writer.WriteElementString("Width", "11in")
writer.WriteStartElement("Body")
writer.WriteElementString("Height", "5in")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Tablix")
writer.WriteAttributeString("Name", Nothing, "Tablix1")
writer.WriteElementString("Top", ".5in")
writer.WriteElementString("Left", ".5in")
writer.WriteElementString("Height", ".5in")
writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
writer.WriteStartElement("TablixBody")
' Tablix Columns
writer.WriteStartElement("TablixColumns")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixColumn")
writer.WriteElementString("Width", "1.5in")
writer.WriteEndElement() ' TableColumnNext fieldName
writer.WriteEndElement() ' TablixColumns' Header Row
writer.WriteStartElement("TablixRows")
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", fieldName)
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows") Since Rows tag in header is not closed not need to open fresh tag
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
'writer.WriteElementString("Value", fieldName)
writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow
writer.WriteEndElement() ' TablixRows'End of Details Rows
writer.WriteEndElement() ' TablixBody
writer.WriteStartElement("TablixRowHierarchy")
writer.WriteStartElement("TablixMembers")
writer.WriteStartElement("TablixMember")
' Group
writer.WriteElementString("KeepWithGroup", "After")
writer.WriteEndElement() ' TablixMember' Detail Group
writer.WriteStartElement("TablixMember")
writer.WriteStartElement("Group")
writer.WriteAttributeString("Name", Nothing, "Details")
writer.WriteEndElement() ' Group
writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixRowHierarchy
writer.WriteStartElement("TablixColumnHierarchy")
writer.WriteStartElement("TablixMembers")
'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
writer.WriteStartElement("TablixMember")
writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixColumnHierarchy
writer.WriteElementString("DataSetName", "tbdataset")
writer.WriteEndElement() ' Tablix
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' Body
writer.WriteStartElement("Page")
' Page Header Element
writer.WriteStartElement("PageHeader")
writer.WriteElementString("Height", "1.40cm")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Textbox1")
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", Nothing, "ABC CHS.")
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TextBox
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' PageHeader
writer.WriteEndElement() ' Page
writer.WriteEndElement() ' ReportSection
writer.WriteEndElement() ' ReportSections' DataSources
writer.WriteStartElement("DataSources")
writer.WriteStartElement("DataSource")
writer.WriteAttributeString("Name", Nothing, "tbdata")
writer.WriteStartElement("DataSourceReference")
writer.WriteEndElement() ' DataSourceReference
writer.WriteEndElement() ' DataSource
writer.WriteEndElement() ' DataSources'DataSet
writer.WriteStartElement("DataSets")
writer.WriteStartElement("DataSet")
writer.WriteAttributeString("Name", Nothing, "tbdataset")
writer.WriteStartElement("Query")
writer.WriteElementString("DataSourceName", Nothing, "tbdata")
'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
writer.WriteElementString("CommandText", Nothing, "TableDirect")
writer.WriteEndElement() ' Query'Fields
writer.WriteStartElement("Fields")
ForEach fieldName In m_fields
writer.WriteStartElement("Field")
writer.WriteAttributeString("Name", Nothing, fieldName)
writer.WriteElementString("DataField", fieldName)
writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
writer.WriteEndElement() ' FieldNext
writer.WriteEndElement() ' Fields' rd datasetinfo
writer.WriteEndElement() ' DataSet
writer.WriteEndElement() ' DataSets
writer.WriteEndElement() ' Report' Flush the writer and close the stream
writer.Flush()
stream.Close()
'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
Dim ms AsNewMemoryStream(myByteArray)
'Supply Stream to ReportViewer
ReportViewer1.LocalReport.LoadReportDefinition(ms)
ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races -
When trying to connect to iTunes I get this message
An internal error occurred during: "FindSonarTrackJob".
java.lang.NullPointerExceptionI too am having this problem and have had, for about a week now.
I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
Really annoying. -
I can't install iTunes on Windows 7. "An error occurred during installation of assembly"
I recently purchased an iPhone 4s. This product requires me to insall iTunes on my pc, which runs Windows 7 64bit. However, when installing iTunes I keep recieving the same error message-- An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version='8.0.50727.4053',publicKey Token="1fc8b3b9a1e18e3b". ProcessorArchitecture="amd64" HRESULT: 0x800736B3
I've already looked over many previous forum posts and haven't been able to find a suitable solution to this yet. I had iTunes on my computer previously but deleted it after I had freezing trouble. I have ensured that all old files have been removed. Bonjour gave me some trouble but I think I have dealt with that now. Also, I have been experiencing some failures with windows update-- service pack 1 for windows seven and some security updates mostly-- which I am yet to solve. I really have no idea what to do as I would like to run my iPhone on the latest iOS. If anybody could help me I would be forever grateful.
Thanks, heattr.I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop). -
Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problemExactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7. -
HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again. -
Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.
it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
Error occurred during install of assembly policy 8.0.microsoft.vc80.CRT
I've been trying to upgrade to itunes 9 on windows vista system. During the install, it says "error occurred during installation of assembly policy 8.0.microsoft.vc80.CRT, version 8.0.50727.403 type win 32 policy public key token=1fc8b3b901e18e3bprocess architecture=x86 Quicktime installs OK, but Itunes install is interruped -- Apple Support install portion is rolled back after this error pops up. I went thru suggested Apple troubleshooting options, got same error. Ran install as administrator from desktop, also did not work. Tried installing both thru apple software updater and directly from Apple website -- still get error. I asked about this on Microsoft site, they sent me back here. thanks for any solutions.
flabud, here are the next steps that I would suggest.
1) If you haven't done so already, reenable McAfee. I'm guessing that you've already done that though.
2) Create a manual restore point. You can also do this after each of the following steps if they are successful but you don't have to necessarily do it each time. One restore point at the beginning should suffice.
3) Disable Windows Defender so that it no longer has possible conflicts with McAfee. McAfee put out this notice earlier this year because the combination of those two programs were causing problems and that notice describes how to disable WD. You should also uncheck Windows Defender using MSConfig (Startup tab) after disabling it as described in the notice. One of my systems had the exact error message described in the notice and since disabling WD it has encountered no further problems.
4) Check Programs and Features in Control Panel for the following programs and install using the associated links if they do not show up. Restart after each installation and then check to make sure the install was successful in Control Panel.
a) Microsoft Visual C++ 2005 Redistributable Package (x86)
b) Microsoft .NET Framework 3.5 (if MS .NET Framework 3.5 SP1 already exists then do not install this)
{I added this because I had problems with this install at the time of the McAfee/WD conflict}
5) Run Windows Update and install any Important or Recommended updates. The installation of the programs in step 4 should allow the others to complete successfully but if any still fail make a note of them as you did before.
6) If everything completes successfully to this point then reattempt the installation of iTunes using the file that you have in the Downloads folder.
I've written the steps in the order that they should be done so if you run into a snag in any step let us know before proceeding to the next step. -
when i download iTunes during downloading process on messege shown:
An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.4053”.type=”win32”.publicKeyToken=”1fc8b9a1e18e3b”.proce ssorArchitecture=”x86”’.Please refer to helpSuppport for more information. HRESULT:0x8007054F
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes. i don't have mcafee security. i have zonealarm security.
please guide me for download itunes in my pc.Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors. -
FATAL ERROR occurred during installation
Trying to install a HP Officejet 4500 G510g-m onto a HP Desktop PC with Windows Vista.
Error message reads:
Fatal error message during installation
An error occurred during installation of assembly
'Microsoft.vc90.MFC,version="9.0.21022.8",publickeytaken=1fc8b3b9 a1e18e3b",processor architecture="x86",type="win32".'
"Fatal error"
"MSI.netdevicemanager40"
Error logs reads:
+0000000000000958722048/s/Now launching=x:/hpzmsi01.exe -m netdevicemanager40 -I xxx -f 'x:/hpwwins26.dat" - validate No at" -validate No
X:/Network64.msi failed with return code 1603
When searching for the code 1603, I found a trouble shooting number (c02455020)
When I run the program regsvr32 Atl.dll it came up with
DII Register Server failed with error code 0x2002801c
But the com product was already registered, the computer has been re-started 12 times. So I cannot understand why I cannot install the complete printer, why is telling me that only the basics can be installed. I purchased and ll-in-one because I need it all not just a printer.
Be so kind to enlighten me.
My father's patience has ended, and before he packs it back into the box, I am willing to troubleshoot it with you.
Please help.
Thank you.Hello Techiizz
Try the following article. It covers the Fatal Error 1603 and should help resolve your problem.
MSI Fatal Error 1603
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue. -
Cloning Issue RC-00118: Error occurred during creation of database
Friends,
I execute following scripts on source system preclone.pl dbTier &perl adpreclone.pl appsTier
then take the cold source backup and transfer on another machine for cloning but when i am executing cloning script on db tier i am getting below mention error after 50% completion. I have very limited time and i cant go back on source system for fresh backup, please help me to sort out his issue.
-------------------ADX Database Utility Finished--------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyData
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDat
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyData
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier
at sun.reflect.NativeConstructorAccessorImpl.newInstan
at sun.reflect.NativeConstructorAccessorImpl.newInstan
at sun.reflect.DelegatingConstructorAccessorImpl.newIn rce)
at java.lang.reflect.Constructor.newInstance(Unknown S
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneP
at java.lang.Thread.run(Unknown Source)
Hopes you will support.
Regards
Irfan Ahmadplz check :
http://doganayn.blogspot.in/2013/11/rc-50004-fatal-error-occurred-in.html
Rapid Clone Failed While Running "Adcfgclone.pl dbTier": ORA-01194 and RC-00118 (Doc ID 375389.1)
Troubleshooting RapidClone issues with Oracle Applications R12 (Doc ID 603104.1)
Troubleshooting RapidClone issues with Oracle Applications 11i (Doc ID 364565.1)
Regards,
Haafiz
Maybe you are looking for
-
Connecting to remote database using Connector/J
I'm new to JDBC so be gentle. Basically i'm trying to connect to a remote database from my own computer (client to server). As far as I know i'm doing everything correctly. Am I correct in thinking that Connector/J is native to JDK versions 1.2 and u
-
Web service call "getAllServiceNames"
var oListURL = "http://localhost:3612/WebSite18/Service.asmx?WSDL"; var e; try xfa.host.messageBox("starting List Retrieval."); var service = SOAP.connect(oListURL); if (typeof service != "object") xfa.host.messageBox("Couldn't get List object."); if
-
How does one safely clean a Macbook screen? Erin S
How does one safely clean a mac screen, a glass cloth doesn't do the job. Thanks, Erinfrom dalonega
-
So I have Adobe CC. I have an AI file and I want to save it as a PSD. Luckily there is an "Export" option. I choose "Export" -> PSD and hit save and I get nothing. It doesn't matter what I choose (file name, or location)...there is nothing there.
-
i was updating my iphone 4 and and it frozzen on loading bar and the apple sign how do i fix it