Error occurred during budget check
Good Morning PS Gurus<
We are unable to increase the quantity of the matearil
in project & save. It’s throwing error
Error occurred during budget check, see cost protocal
Message Number :IW172
Diagnosis:
An error occurred during budget availabilty check
Procudure:
Display the cost determination log for the order or network plan for more detailed information.
We do’t have budget in our project. I checked budget TL ( it said warning message:1)
Please throw light on this issue.
Thanks
PY
Hello Team,
When i select the network-activityà extrasà logsà cost calculation.
It said WBS <<PRO1234> do't exist CJ021
Please help.
Thanks
PY
Similar Messages
-
Error occured during budget check while planning in network activity
Dear All,
i have created a project with 4 WBSE. i have assigned budget to one of these WBSE and released that project. than i want to do planning in next WBSE this is giving error while saving this planning as Error occured during budget check, see cost.
i have created user status for budgeting like if we have not budgeted than WBS is not able to release. i have added availability control as Forbidden while not budgeted but this not effective.
please suggest me some thing to remove this problem
thanks
Sunilhi,
In WBS you can Plan and budget to group WBS , the below wbs will consume budget form top.
Proj>WBS1(Group WBS- Plan/Budget) it is applicable for below all wbs elements say WBS2>WBS3
When you are determining Hierarchy you should create WBS in same levels then only you can allocate Budget.
If you wan to allocate budget for WBS2 and WBS3 separately.
Proj
WBS1
WBS2 WBS3
WBS2A WBS3A
WBS2B WBS3B
WBS2C WBS3C
Proj>WBS1 (it will no more act as Group wbs element) then you can directly plan and budget for below wbs elements WBS2 and WBS3.
Below hierarchy will consume budget from as displayed above.
Note: In you case as per my understanding return budget make zero, then plan and budget the same it will work.
Thanks and regards
Sadiq -
IW172 : Error occured during Budget Check see Cost Protocol
Hello Guru's
While creating Capital Reservation in the Network i am getting the error " IW172 : Error occured during Budget Check see Cost Protocol" In making reservation we don't book any cost in the reservation.The Resv is charged by making SR.The amount is still available against the WBS Element.Please suggest what needs to be done.
From
AashutoshCheck whether the following note helps you:-
Note 551677 - Process order: Availability control against WBS element
G. Lakshmipathi -
Proxy Activity terminated because errors occurred during package checks
Hi,
When i am activating the client proxy class in ECC system after assigning it to the package,i am getting the below error.With local object($TMP) its working fine. I tried creating package using se80 as well as from sm30 using view V_TDEVC also and the package is created with no restrictions also .Kindly suggest what needs to be done to fix the issue.
Activity terminated because errors occurred during package checks
Message no. EU839
Diagnosis
Dictionary objects can only be activated if the package check is swithch ed on - provided they do not contain any package check errors.
You will receive a list of the package check errors if you execute the package check within the appropriate dictionary tool. To do this, use the respective menu entry in the first menu of theen; corresponding dictionary tool.
Procedure
Keep note of the setting for the package check (system-wide property) in your SAP System; this setting defines in which form the package concept is to be applied.
In particular, check whether the package in which the incorrect dictionary object is located has sufficient usage applications. Then, if necessary, create the missing usage applications.
As soon as the package check errors have been removed, you must again activate the dictionary object.
Thnx,
GouthamHi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana -
Activity terminated because errors occurred during package checks
Hi Experts,
i am working on File to Proxy scenario.while i am trying to activate genarated proxy objects i am getting below eror.
Activity terminated because errors occurred during package checks .
anybody pls resolve the issue.
regards,
bhuvan.Hi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana -
An internal error occurred during the authorization check.
Hi,
Need help,
While deleting chain in order to create Meta chain.I am getting this Error message.
ThanksHi,
I am creating a meta chain.When i am trying to add local chain in it.Through general services tab >> start process.A dialog box appears asking me to delete one of the chain and the other one will act as both.When i am clicking yes then i am getting this msg.
An internal error occurred during the authorization check.
Edited by: Niraj Sharma on Aug 12, 2009 11:19 AM -
Errors occurred during the extraction in RSA3 - Extractor Checker
Hello,
I'm trying to check the standard datasource - 0CRM_QUOTATION_I (CRM Quotation Item) in RSA3 (extractor checker) in the CRM system but it returns a pop-up 'Errors occurred during the extraction'.
Could someone please let me know where and how to check the error as it is not very obvious from the pop-up?
Many thanks.
Regards,
Sri.HI Sri,
Sometimes the BWA5 Adaptor settings are not properly transported to QA from DEV ,
Try this ,
Create a transport request manually from DEV again for the below object in TCODE : SE03 ( Objects in Requests --> Include Objects in a Transport Request --> Under selection by type and name --> choose radio button --> Selected Objects and provide the below entries )
R3TR SMO4 0CRM_QUOTATION_I
( you will have to enter SM04 and datasource name only ,press enter it will pick up R3TR automatically ) and then transport to QA
This should resolve the issue
Regards,
Sathya -
Errors occurred during the extraction datasource of CRM System in Check extractor
Dear All,
Please find the below error's while I am extracting data from the data source in CRM.
RM_QUOTA_ORDER_I: Table SMOXHEAD contains no BDOC name .
Errors occurred during the extraction in Check extractor.
Please let me know solution to resolve the issue.
Thanks
Regards,
SaiHi,
Where your getting this error?
during info pack load or checking at crm system RSA3?
if your running your info pack then please run data source at RSA3.
Seems like your source table may not have any bdocs.
Where your runing this loads? prod or dev?
Thanks -
I recently upgraded to Microsoft 365 Home and use Outlook 2013. The Acrobat PDFMaker Addin worked fine in Office 2010. Now, I get an error message: Not loaded. A runtime error occurred during the loading of the COM Add-in.
I use Adobe Acrobat X Professional.
I have restarted Outlook, restarted my computer, and nothing changes.
Does anyone have a solution?
SteveI do not think that AA X is compatible with the newest versions of OFFICE and such. Your only choice is to print to the Adobe PDF printer or use the MS plugins to create PDFs.
-
An error occurred during olap API metadata retrieval. This is probably caus
this is what i have done so far. i really nead some help asap!!!
1. Install Oracle 9i Release 2 (9.2.0.1) Enterprise Edition with the General purpose database configuration (Data warehouse works as well). At the end of the installation I chose the password management button to change passwords for the few necessary accounts: SYS, SYSTEM, OLAPSYS, SH.
2. Download the p3948480_9206_WINNT.zip from metalink, the 9.2.0.6 patchset
3. Shut down any existing Oracle9i database instances with normal or immediate priority. Stop all listener and other services running in the Oracle home directory where you want to install the patch set.
4. unzip the content of thepatch to a temp directory
5. start setup.exe under the temp directory (it will start the Oracle Universal installer 10.1.0.3)
6. install the patchset to your Oracle home, selecting the source in the temp_dir\stage\products.jar file
7. review carefully the post-installation tasks for the patchset:
Review the following sections before upgrading a database (quote from the patchset html readme):
8.2.1.1If JServer is part of the installation ensure that there is at least 10 MB of free space allocated to the SYSTEM tablespace.
8.2.1.2 Check XDB Tablespace Size
For RAC installations, ensure that there is at least 50 MB of free space allocated to the XDB tablespace.
8.2.1.3 Set the SHARED_POOL_SIZE and JAVA_POOL_SIZE Initialization Parameters
Set the value of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters as follows:
Start the database:
SQL> STARTUP
If necessary, enter the following command to determine whether the system uses an initialization parameter file (initsid.ora) or a server parameter file (spfiledbname.ora):
SQL> SHOW PARAMETER PFILE;
This command displays the name and location of the server parameter file or the initialization parameter file.
Determine the current values of these parameters:
SQL> SHOW PARAMETER SHARED_POOL_SIZE
SQL> SHOW PARAMETER JAVA_POOL_SIZE
If the system is using a server parameter file:
If necessary, set the value of the SHARED_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET SHARED_POOL_SIZE='150M' SCOPE=spfile;
If necessary, set the value of the JAVA_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET JAVA_POOL_SIZE='150M' SCOPE=spfile;
If the system uses an initialization parameter file, if necessary, change the values of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters to at least 150 MB in the initialization parameter file (initsid.ora).
Shut down the database:
SQL> SHUTDOWN
8.2.2 Upgrade the Database
After you install the patch set, you must complete the following steps on every database associated with the upgraded Oracle home:
Log on as a member of the Administrators group to the computer where the Oracle components are installed.
Use SQL*Plus to login to the database as the SYS user with SYSDBA privileges:
sqlplus /NOLOG
CONNECT SYS/password AS SYSDBA
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
Restart the database:
SQL> SHUTDOWN
SQL> STARTUP
Run the utlrp.sql script to recompile all invalid PL/SQL packages now instead of when the packages are accessed for the first time. This step is optional but recommended.
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\utlrp.sql
12. Install JDeveloper 9.0.4 (download it from OTN and just unzip it in a directory ... it doesn't require an oracle home)
13. Install BI Beans 9.0.4 (download it from OTN as well), run the setup.exe that comes with it and in the destination oracle home select the directory where you installed JDeveloper and give an oracle home name to it)
14. Install the BIBDEMO schema:
Create a directory on the computer that is running the Oracle9i database. This install_home directory is the location to which you will upload the data files that are required to build the BIBDEMO schema.
On the computer where BI Beans is installed, locate the bibeans_home\bibdemo_schema folder (where bibeans_home is the root folder of your BI Beans installation). Copy all of the files found in this folder to the install_home folder on your server machine.
Open a DOS prompt and navigate to the install_home folder.
Run bibdemo.bat to install the schema, using the following syntax:
bibdemo.bat <path to Oracle database files >
For example, for an instance named my9iService, enter the following:
bibdemo.bat D:\OraHome1\oradata\my9iService
You are prompted for the password for the sys as sysdba user.
The script takes approximately 15 minutes to run, depending on the machine specifications. It is normal to see some error messages while the script is running. In addition, when materialized views are being created in the database, the script will appear to stop; this is also normal. A clear message will tell you when the script has completed.
The log files (*.log) that are generated by the installation script are stored in the folder from which you ran the script.
Here's what
bi_checkconfig.bat -h ana -po 1521 -sid proiect -u bibdemo -p bibdemo -q
returned:
BI Beans Diagnostics(v1.0.2.0) 2/28/05
===============================================================================
JDEV_ORACLE_HOME .......................... = E:\OraDS
JAVA_HOME ................................. = E:\OraDS\jdk
JDeveloper version ........................ = 9.0.4.1.1.1436
BI Beans release description .............. = BI Beans 9.0.4 Production Release
BI Beans component number ................. = 9.0.4.23.0
BI Beans internal version ................. = 2.7.5.32
Connect to database ....................... = Successful
JDBC driver version ....................... = 9.2.0.4.0
JDBC JAR file location .................... = E:\OraDS\jdev\lib\patches
Database version .......................... = 9.2.0.6.0
OLAP Catalog version ...................... = 9.2.0.1.0
OLAP AW Engine version .................... = 9.2.0.1.0
OLAP API Server version ................... = 9.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in bibdemo
OLAP API JAR file version ................. = 9.2
OLAP API JAR file location ................ = E:\OraDS\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 2
Number of metadata measures ............... = 12
Number of metadata dimensions ............. = 8
Testing sample query for measures and dimensions
(S=Schema, C=Cube, M=Measure, D=Dimension)
1/21) Measure Budget ................... = Successful
S=BIBDEMO, C=BIBDEMO_BUDGET_CUBE, M=BUDGET
2/21) Measure Actual ................... = Successful
S=BIBDEMO, C=BIBDEMO_ACTUAL_CUBE, M=ACTUAL
3/21) Measure Close Price .............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_CLOSE
4/21) Measure Open Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_OPEN
5/21) Measure Low Price ................ = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_LOW
6/21) Measure High Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_HIGH
7/21) Measure Stock Volume ............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_VOLUME
8/21) Dimension Division ............... = Successful
S=BIBDEMO, D=DIVISION
9/21) Dimension Line Items ............. = Successful
S=BIBDEMO, D=LINE
10/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
11/21) Dimension Day .................... = Successful
S=BIBDEMO, D=DAY
12/21) Dimension Stock .................. = Successful
S=BIBDEMO, D=STOCK
13/21) Measure Costs .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.COSTS
14/21) Measure Promotion ................ = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.PROMO
15/21) Measure Quota .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.QUOTA
16/21) Measure Units .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.UNITS
17/21) Measure Sales .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.SALES
18/21) Dimension Channel ................ = Successful
S=BIBDEMO, D=CHANNEL
19/21) Dimension Geography .............. = Successful
S=BIBDEMO, D=GEOGRAPHY
20/21) Dimension Product ................ = Successful
S=BIBDEMO, D=PRODUCT
21/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
Metadata output location .................. = E:\OraDS\bibeans\bi_checkconfig\bi
_metadata.txt
To interpret this output, see the "Displaying Information about your Oracle9i Bu
siness Intelligence Beans Client Configuration" technical note, whose file name
is bi_checkconfig_tn.html
These diagnostics are captured in: E:\OraDS\bibeans\bi_checkconfig\bi_checkconfi
g.xml
now: i have created some new stuff:
1). user ana with roles:
-dba
-olap_dba
-connect
-resource
(same roles as bibdemo)
2).schema ana; tablespace ana (permanent), tablespace anatemp (temporary)
3).i have created some relational tables and i have inserted some data in them:
agent, aparat (cofee machines), beneficiar (clients), locatii (city), raport (REPORT), timp (time), tipaparat (types of cofee machines), tipbautura (products : types of cofee made by all the cofee machines), zone (state)
4). one fact table with:
- sold cantity (measure)
- id_bautura (id_product) primary key
- id_timp(id_time) primary key
- id_beneficiar (id_client) primary key
- id_agent primary key
- id_locatie (id_city) primary key
- id_aparat (id_cofee_machine)primary key
i have inserted some data also
5).dimensions:
AGENT_DIM :levels: codag(id_agent), numeag (agent name), telefag (agent phone number)from relational table agent
BENEFICIAR_DIM :levels: codben (id_client), denumire (client name), adresa (adress) ,codl (id_city) etc from relatinal table beneficiar (clients)
TIMP_DIM :levels: id, year, month from relational table timp (time)
TIPBAUTURA_DIM :levels: codbautura (id_product), numebautura (product name)from relational table tipbautura (products)
ZONA_DIM :levels: codzona (id state), numezona (state name), codoras (id city), numeoras (city name) with ierarhy id_state---id_city FROM 2 RELATINAL TABLES CITY AND STATE!!!!!!!! AM I ALOUD TO DO THAT?????
DO I NEED TO CREATE A DIMENSION FROM ONLY ONE TABLE???????
APARAT_DIM :LEVELS: codben (id client), codtip (id machine type), denumireap (machine type name), matricolap ((machine id) (FROM 2 RELATIONAL TABLES ALSO!!!!!!! FROM TYPES OF COFEE MACHINES AND COFEE MACHINES!!!!!
6). I HAVE NOW CREATED THE CUBE FROM THE FACT TABLE AND WITH ALL THE DIMENSIONS
7). summary advisor wizard NOT WORKING! IT NEVER STOPS!
8). I HAVE CREATED ALSO ONE materialized view FOR THE CUBE
IF I COMPILE IT... NO ERRORS
9). CUBE VIEWER NOT WORKING!!!!!!! IT ONLY APEARS A BELL!!!
NOW IF I RUN BI_CHECK CONFIG ON ANA AND ALSO ON BIBDEMO!!!!!!!!!!!!
IT SAYS:
1) An error occurred during olap API metadata retrieval. This is probably caused by inconsistent metadata.
============================================================================
oracle.express.ExpressServerExceptionError class: Unknown Error
Server error descriptions:
INI: System failure, Generic at TxsOqConnection::getDefaultDatabase
at oracle.express.olapi.data.full.ExpressDataProvider.getMetadataProviderInterface(ExpressDataProvider.java:1003)
at oracle.olapi.metadata.MetadataFetcher.initialize(MetadataFetcher.java:73)
at oracle.olapi.metadata.MetadataFetcher.<init>(MetadataFetcher.java:45)
at oracle.olapi.metadata.BaseMetadataProvider.<init>(BaseMetadataProvider.java:47)
at oracle.olapi.metadata.mdm.MdmMetadataProvider.<init>(MdmMetadataProvider.java:130)
at oracle.express.olapi.data.full.ExpressDataProvider.getDefaultMetadataProvider(ExpressDataProvider.java:964)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.getMdmMetadataProvider(MDMMetadataDriverImpl_92.java:1133)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.attach(MDMMetadataDriverImpl_92.java:810)
at oracle.dss.metadataManager.server.drivers.mdm.MDMMetadataDriverImpl.attach(MDMMetadataDriverImpl.java:125)
at oracle.dss.metadataManager.server.MetadataManagerImpl.buildObjectModel(MetadataManagerImpl.java:1092)
at oracle.dss.metadataManager.server.MetadataManagerImpl.attach(MetadataManagerImpl.java:969)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:876)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:799)
at BICheckConfig.checkConnection(BICheckConfig.java:277)
at BICheckConfig.main(BICheckConfig.java:1348)
I TRYED ALSO WITH USER ANA WITH ROLES:
- DBA
- CONNECT
-RESOURCE
- OLAP_USER
NOT WORKING! AND ALSO BIBDEMO NOT WORKING!
WHAT AM I MISSING? SHOULD I USE AW MANAGER? OR DO I NEED TO CREATE AN AMNALITIC WORKSPACE???
WHAT ARE THE STEPS TO CREATE A GOOD METADATA????Hi,
The issue here is if the whole catalog is corrupt or just one schema. So to try and determine the status of the catalog I would try:
1) Using OEM remove all the objects you created
2) I presume you created your database using the Database Configuration Assistant? You should have used the warehouse template
3) Make sure the following accounts are unlocked and also not expired : SH, OLAPSYS
4) Make sure the password for the SH schema is SH
5) Make sure the password for the OLAPSYS account is manager
6) Install the BIBDEMO schema that is shipped with BI Beans. This in the jdev_home/bibeans/bibdemo_schema
The installation process will remove SH schema from the OLAP catalog.
7)Once this is installed use JDeveloper to see if you can create a crosstab or graph.
8) If the BIBDEMO schema works try creating your new schemas one at a time.
9) Make sure the if you define the a dimension as type time it has END_DATE (column type DATE) and TIME_SPAN (column type number) defined. Otherwise don't define the dimension as type time.
Hope this helps
Keith Laker
Product Manager
Oracle Business Intelligence Beans -
RC-00118: Error occurred during creation of database
adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Error occurred during initialization of VM
im new to jdeveloper please anyone help me...
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\reir\AppData\Local\Temp\trustStore9189074039610736238.jks -javaagent:../modules/org.eclipse.persistence_1.1.0.0_2-1.jar -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Error opening zip file or JAR manifest missing : ../modules/org.eclipse.persistence_1.1.0.0_2-1.jar
agent library failed to init: instrument
Process exited.This issue is usally caused by missing rt.jar. It's a good idea to manually unpack libraries.
Look for your java library directory (usually jre<version>/lib) .
If you can see rt.pack and can't see rt.ajr -
make the follwoing (I consider you save this to a script file then run it and your JAVA_HOME is correctly set and you're using some sort of UNIX):
---------------------------------cut---------------------------------
#!/bin/sh
JH=${JAVA_HOME:-"/usr/java/jre1.5.0_04"}
UNPACK_EXE=$JH/bin/unpack200
if [ -f $UNPACK_EXE ]; then
chmod +x $UNPACK_EXE
PACKED_JARS="lib/rt.jar lib/jsse.jar lib/charsets.jar lib/ext/localedata.jar lib/plugin.jar lib/javaws.jar lib/deploy.jar"
for i in $PACKED_JARS; do
srcFile=${JH}/`dirname $i`/`basename $i .jar`.pack
dstFile=${JH}/$i
if [ ! -f $srcFile ]; then
printf "Error: Unable to find %s. Please, check out your installation.\n" $srcFile
exit 1
fi
$UNPACK_EXE $srcFile $dstFile
if [ ! -f $dstFile ]; then
printf "Error: unpack could not create %s. Please refer to the Troubleshooting\n" $dstFile
printf "Section of the Installation Instructions on the download page.\n"
exit 1
fi
rm -f $srcFile
done
else
printf "Error: unpack command could not be found. Please refer to the \n"
printf "TroubleShooting Section of the Installation Instructions on \n"
printf "the download page.\n"
printf "Please do not attempt to install this archive file.\n"
exit 2
fi
---------------------------------cut--------------------------------- -
Error occurred during initialization of VM. Could not reserve enough space
Dear All,
I am trying to install SAP NetWeaver 7.0 SR2 SP9 on Oracle 10.2 and platform is Windows 2003 32 bits. While installing, in t he restarting the JAVA Instance step, server0 node is getting shutdown. When I further analyzed dev_server0 log, I could get below useful information:
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 6008] JLaunchIAbortJava: abort hook is called
[Thr 6008] **********************************************************************
*** ERROR => The Java VM aborted unexpectedly.
*** Please see SAP Note 943602 , section 'Java VM crashes'
*** for additional information and trouble shooting.
[Thr 6008] JLaunchCloseProgram: good bye (exitcode = -2)
I referred the note mentioned above and it inturn referred to note# 940893. I followed many other sap notes also. However my above problem did not solve yet. I have checke my JAVA SDK version also. It is j2sdk1.4.2_11 and seems to be fine. My systems memory is 3 GB and I gave 20 GB as Virtual memory. I dont think that it should be a memory problem. However somewhere I am lost and can not get the grip over the problem to resolve it.
May I request all of you to kindly help me on above issue? Please let me know if you need any more information.
Waiting for your kind replies.
Regards,
FaisalDears,
Thank you very much for your replies. The heap size was 1024. I changed it to the below:
Heap Size=512 (earlier 1024)
Changed below paramters in configtool:
-Xmx512m (earlier 1024)
-Xms256m (earlier 1024)
Hope this information will be helpful to others as well.
Once again, I thank both of you to guide me in proper directions.
Regards,
Faisal -
Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support -
Hello all,
I ran into some error during installation. And I need your help in solving this problem. The error occurs during Step Configure (Configuration assistant "Repository Configuration" has failed) and the Repository Configuration in the Installation Progress Details view.
And the error is shown below is from ViewLog and from the terminal where I launched runInstaller. Thank you all in advance for your helps.
ViewLog:
INFO: oracle.sysman.top.oms:Completed Prereq check
INFO: oracle.sysman.top.oms:The plug-in Plugins Prerequisites Check has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Repository Configuration
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.RepositoryConfiguration
INFO: oracle.sysman.top.oms:Classpath = /test/vince/em_install/oem_mgr/oms/sysman/jlib/emprereqkit.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emCoreSDK.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/omsConfig.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emcore_client.jar:/test/vince/em_install/oem_mgr/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcucommon.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emagentSDK.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcu.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Inside perform method
INFO: oracle.sysman.top.oms:Running the Schema Action...
INFO: oracle.sysman.top.oms:Setting required properties
INFO: oracle.sysman.top.oms:REPOS_USER: SYSMAN
INFO: oracle.sysman.top.oms:SYS_USER: SYS
INFO: oracle.sysman.top.oms:CONNECT_STRING: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:ORACLE_HOME: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:mgmtTabLoc :
INFO: oracle.sysman.top.oms:confDataTabLoc :
INFO: oracle.sysman.top.oms:defaultDataFileLoc :
INFO: oracle.sysman.top.oms:ad4jDataTabLoc :
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:The required parameters are set for schemamanager
INFO: oracle.sysman.top.oms:Starting both repos upgrade and transx loading in parallel
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: create oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:create_process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:The command run for transx is /test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) -action transx -repos_user SYSMAN -dbUser SYS -mwHome /test/vince/em_install/oem_mgr -mwOraHome /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:processing arguments
INFO: oracle.sysman.top.oms:compiling arguments for validation
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms: Enter SYSMAN repository password :
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:Verify :
INFO: oracle.sysman.top.oms:Enter password for: SYSMAN
INFO: oracle.sysman.top.oms: done checking required user credentials...
INFO: oracle.sysman.top.oms:done creating arguments...
INFO: oracle.sysman.top.oms:creating logger..
INFO: oracle.sysman.top.oms: Connection exception in action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: no action logger file name from previous session
INFO: oracle.sysman.top.oms: action logger filename after search: emschema.log
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:already exists: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:oracleHome: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:connect_string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:done connection validation without error
INFO: oracle.sysman.top.oms:action to perform is: transx
INFO: oracle.sysman.top.oms:action to be performed:TRANSX
INFO: oracle.sysman.top.oms:action is transx - non RCU based action
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log.TRANSX
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms:newly created: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:process_id:132hgzixoqx34
INFO: oracle.sysman.top.oms:Initialization...
INFO: oracle.sysman.top.oms:Driver: oracle.jdbc.driver.OracleDriver
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:transx_retCode:255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-65096: invalid common user or role name
File:/test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql
Statement:CREATE USER SYSMAN IDENTIFIED BY ****** DEFAULT TABLESPACE MGMT_TABLESPACE QUOTA UNLIMITED ON MGMT_TABLESPACE TEMPORARY TABLESPACE TEMP
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
Terminal:
PLUGIN_DEP_LIST={}
PLUGIN_PURGE_LIST={}
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 5
Percent Complete: 30
Percent Complete: 55
Percent Complete: 80
RCU-6130:Action failed - RCU-6134:Error while trying to execute JDBC action.
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Connected As : SYS
RCU Logfile : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/rcu.log
RCU Checkpoint Object : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component Status Logfile
EM Repository Creation Configuration Failed No log created
EM Repository Init Configuration Failed No log created
EM Repository Common Failed /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/em_repos_common.log
Repository Creation Utility - Create : Operation CompletedYou are using DB12 as EM repository which is not certified. From the log, ORA-65096: invalid common user or role name , some people have reported similar issue while using DB12 as their repository.
If this not the case then log an SR with oracle support and upload the logs:
- $ORACLE_HOME/sysman/log/schemamanager zipped
- $ORACLE_HOME/cfgtoollogs/ zipped
- central inventory logs
Maybe you are looking for
-
Connecting to an external display using the setting optimised for built in screen?
i am having trouble connecting to an external display with the lid closed and the settings is optimised for built in display. it was working nicely until yesterday when i changed the resolution. and now i cant take it to optimised for built in displa
-
I am trying to write a script that will execute a batch file on a remote Windows server. This line below is basically what I'm trying to do and it works without error, however I would like to use a variable for the path\filename of the batch file. in
-
Hi, I am creating the desktops using PortalAdmin. The problem is that, although my pages are added to desktop properly, my portlets can not be added. The pages of the desktop are empty. I checked my database tables and see that PF_PORTLET_DEFINITION
-
URL to launch the navigation bar?
Hi guys, We were provided with an HTML5 app that handles the touch events for the entire page and we run it inside of the web overlay. To exit back to the library we use another overlay on top of the 1st one as a button with the link to goto://Applic
-
Ipod touch non si accende,lo schermo si illumina di bianco ma non succede nulla
ipod touch non si accende, si illumina di luce biancastra ma non va avanti;ho già fatto gli aggiornamenti e provato il ripristino totale