Error occurred during character conversion in SXMB_MONI

Hello Experts,
Good Day!
I would like to seek your help here. When i used tcode SXMB_MONI to search for messages i get this error : Error occurred during character conversion.
So far no problem with the program. Its work for all other dates. Just for one particular day and specific time period, im geting this error.
Does anyone know what is this error means? Please reply..
Thanks for your help.
Looking forward for ur replies..

Hi Presheela,
Basically this problem occurs when ur payload contains any special characters like '&' ,'>'...etc .So you have to take care of how to deal with these characters in XI.
Refer the following documentation:
How to Work with Character Encodings in Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Regards,
Vinod.

Similar Messages

  • SMQ2 (Inbound Queue) : Error occurred during character conversion

    Hi,
    In SMQ2 an Inbound Queue has failed with status text "Error occurred during character conversion". The XML message inside this queue is in waiting status with status text " Scheduled for Outbound Processing" .
    Even after cancelling this message from SXMB_MONI, and reposting the PO, still again the queue and the XML message inside the queue are in same status.
    As this is in XI production system, requesting to provide some suggestion ASAP.
    Thanks,
    Mateen.

    The queue status is still sysfail. There is only 1 message waiting in the queue.
    I think that the queue might be locked for some reason and after unlocking the queue and restarting the message, the message will get processed successfully.
    But before working on this I want to make sure that the queue is locked.
    Do you or anyone else know how and from where can I check whether the queue is locked or unlocked?
    Regards,
    Mateen.

  • Benefits Service - Error occurred during currency conversion from  to USD

    I am attempting to run the add beneficiaries service in employee self servie and receive the following error message "Error occurred during currency conversion from blank to USD
    Has anyone come across this error before?

    Both are set up properly.  This error only happens on some US teammate records.  It seems to occur after we do a refresh of our QA environment from our produciton environment

  • SXMB_MONI-system error occured during persist

    Hi Friends
    While running the SXMB_MONI tcode in my XI system i am getting this error:
    "system error occured during persist"
    I am on a production system please reply ASAP.
    Thanks

    Hi Aquarin,
    then it is really strange.........
    in RWB, see the status of Integration Engine - is it green or not...........i think it will not be green..........if it is not green, then see in the below messages, if you get any error message....................
    just go to SICF and check all the services are running or not..........
    in RWB, see in message monitoring what is happening to messages during the last 2 hours.............
    Regards,
    Rajeev Gupta

  • I can't install iTunes on Windows 7. "An error occurred during installation of assembly"

    I recently purchased an iPhone 4s. This product requires me to insall iTunes on my pc, which runs Windows 7 64bit. However, when installing iTunes I keep recieving the same error message-- An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version='8.0.50727.4053',publicKey Token="1fc8b3b9a1e18e3b". ProcessorArchitecture="amd64"      HRESULT: 0x800736B3
    I've already looked over many previous forum posts and haven't been able to find a suitable solution to this yet. I had iTunes on my computer previously but deleted it after I had freezing trouble. I have ensured that all old files have been removed. Bonjour gave me some trouble but I think I have dealt with that now. Also, I have been experiencing some failures with windows update-- service pack 1 for windows seven and some security updates mostly-- which I am yet to solve. I really have no idea what to do as I would like to run my iPhone on the latest iOS. If anybody could help me I would be forever grateful.
    Thanks, heattr.

    I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
    BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

  • #550 4.4.7 QUEUE.Expired; message expired ## With LastError "A storage transient failure has occurred during content conversion." In submission Queue. (Exchange 2013)

    Greetings,
    We seem to be having a problem with some users who are attempting to send e-mails from within the organisation to an external domain. Not all users are affected, and not all outgoing e-mails have this issue.
    Some e-mails get stuck in the submission queue. This is the error message in Last Error : "A storage transient failure has occurred during content conversion."
    Days later, the internal user who send the message gets a #550 4.4.7 QUEUE.Expired; message expired ## NDR.
    We did have some initial configuration issues, but these were fixed more than a week ago :
    - The external FQDN during EHLO was set to the wrong address, now pointing to the correct one.
    - SPF record was updated with new IP adress.
    Here is some additional information on the issue :
    - Not on any blacklists - checked using dnsbl.info
    - Telnet to remote servers works from exchange server, connections are accepted and can send mail.
    - Outbound SMTP test ran using Microsoft Remote Connectivity Analyser : Passed with both External (Static) and Smarthost IP.
    - This seems to happen only with emails that have an attachment and that are transfered, but only for the affected users. 
    - If content from these e-mails is manually copied over to a new email, email is sent to destination without problem.
    Configuration information :
    - Exchange 2013 running on Windows 2012 Datacenter with all latest updates.
    - Outgoing e-mail is sent via smarthost. Only one outbound transport rule is active.
    - Using internal DNS server.
    - There is only one mailbox database.
    Thank you for taking the time to read this!

    On Wed, 16 Jan 2013 15:31:14 +0000, Ipigi wrote:
    >Sorry, I often get some terms mixed up when I explain things as our users use the French version of outlook.
    >
    >E-mails are not transferred, but forwarded manually from their outlook. Message format in outlook is set to HTML and not Rich Text when they foward the e-mail.
    Do they forward the message as an attachment?
    >When forwarded internally, this is in the internet headers :
    >
    >Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: binary
    Within your organization I'm prety sure that messages will use TNEF.
    What does the message contain at the external recipient's side?
    >It really seems to me that Exchange is not converting RTF to Plain Text. The first link you provided states in it's final paragraph that Exchange should be doing this conversion.
    If you can, try creating a mail-enabed Contact for one of the external
    recipients and set the message format on that.
    >If I disabled TNEF as that link suggests, offending messages will get stuck in the submission queue again.
    >
    >I thank you for your help so far. This is not an issue I've had with any previous installations/migrations of Exchange that I have done.
    >
    >Please let me know if you need any additional information.
    Have you tried UNsetting TNEF on the remote domain?
    Set-RemoteDomain Default -TNEFEnabled $null
    That should leave it up to the client to determine the format. It's
    probably not what you're after, but see it makes a difference in the
    format.
    Rich Matheisen
    MCSE+I, Exchange MVP
    --- Rich Matheisen MCSE+I, Exchange MVP

  • SOAP to proxy scenarion  error An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP

    Hi all
    My scenario is soap to proxy scenario .while testing using soap to proxy i am getting " An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP:  in sxmb_moni sap pi .
    Some times this interface is failing and some time its successfully processing.
    While testing with successful xml data also i am getting the same error in sxmb_moni.
    I modified the proxy inbound code where passing error message  and still i am getting the same message.
    Please suggestion the same  for error solving.
    Regards
    Ravi.

    Hi,
    I'm facing the same problem.
    I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
    FP_GET_LAST_ADS_TRACE return following:
    Begin operation:
    Render, elapsed time = 16 ms.
    #   End operation: Render, elapsed time = 89 ms.
    #   Begin operation: UsageRights, elapsed time = 89 ms.
    #   End operation: UsageRights, elapsed time = 97 ms.#
    ...and the error string of FP_GET_LAST_ADS_ERRSTR is:
    ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
    Any idea what the problem might be?

  • MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant  to repair damaged index did not work

    After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
    This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
    Following this instruction resulted in the same failure message being repeated continuously.
    How do I proceed to upgrade the Mail app.?

    If doing as the alert directs (relaunching Mail) has no effect, see below.
    The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
    ☞ All your incoming mail accounts are on an IMAP or Exchange server
    ☞ You store sent messages on the server
    ☞ You don't have any "On My Mac" mailboxes
    Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
    If you know that the conditions above are satisfied, continue as follows.
    Quit Mail if it's running. Back up all data.
    Open the Library folder in your home folder by holding down the option key and selecting
              Go ▹ Library
    from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
    Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
    Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
    If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

  • Error -1073807253 occurred at VISA Read in transient SR830.vi VISA: (Hex 0xBFFF006B) A framing error occurred during transfer.

    Hi,
    I am have written a program with labview to make transient c-v measurement using a stanford research SR830 lockin amplifier. The program seems to be runing fine, but sometimes it is givvibg an error:
    Error -1073807253 occurred at VISA Read in transient SR830.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF006B) A framing error occurred during transfer.
    Error -1073807253 occurred at VISA Read in transient SR830.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF006B) A framing error occurred during transfer.
    but if I press ok, the program again starts running. What might be the poblem? BTW I googled a bit and I see that in the labview topic "RS-232 Framing Error with HP 34401A Mulitmeter" by pkennedy32 this is what is said about framing error:
    ""Framing Error" in an RS-232 context means a very specific thing - when the receiver was expecting a stop bit, the line was not in SPACE condition. This can be the result of:
    1... Baud rate mismatch (although other problems would likely crop up first).
    2... Data Length problem, If I send 8 data bits and you expect 7, the stop bit is in the wrong place.
    3... Parity setting mismatch - If I send 7 data bits + parity and you expect 7 data bits and no parity, the stop bit is in the wrong place.
    4... Mismatch in # Stop bits - If I send you 7 Data bits + parity + one stop bit, and you expect 7 data bits + parity + TWO stop bits, the second one might not be correct, although most devices do not complain about this.
    But, I must say that this is the same com port setting that I use to measure c-v hysterysis, but I never gt this error there.
    I attach the program herewith for your kind perusal. Please help me resolve this issue.
    Thanks in advance.
    Solved!
    Go to Solution.
    Attachments:
    transient SR830.vi ‏94 KB
    csac.vi ‏8 KB
    sr830 initialize1.vi ‏15 KB

    @Dennis Knutson  you are right I checked the read indicator in backslash mode, and instead of a \n it is sending \r. So I changed the \n in my write strings to \r. But, if I keep the CLOSE VISA outside my loop instead of inside as you suggested, the termination character appears to come in the middle of the read string instead at the end. And since the read terminates at the \r so it is displaying some junk value before the \r, but if I put the CLOSE VISA outside the loop and play along with the bytes at the read buffer, I see the whole read string with the \r  at the end of the string. But, whenever the values are in exponential form (when close to zero) like 6.938839 e-5, I always get a time out error whatever be the timeout that I put at the VISA initialize. And subsequently, if I stop the program and run it again the machine program hangs and I donot get any reading. Then after I close it again and start, sometimes it hangs for some more or starts working. If I put an arbitrarily large byte count at the READ VISA, then I always get the time out before the operation completed error.
    @ Ravens Fan I have removed the CSAC VI altogether and taking the CH! And CH” reading separately, instead as one string. So, no more issues with that.
    I use the control at the delay so that I can choose how much delay I want to set, and I use the math operation because I am using adding up the delay time to keep track of the time elapsed. Because in the end I have t plot a time vs. CH! And CH” readings.
    I am not sure but probably I am making some silly errors. Please help me out. 
    Attachments:
    transient SR830-2.vi ‏103 KB
    sr830 initialize1.vi ‏15 KB

  • IDOC to File --- Error occurred during back-routing Error in communication

    Hi All,
    I am doing a IDOC to File (File Content Conversion) Scenario in which I have mentioned the field separator and end separator.. When i trigger the IDOC, i am only getting the first field value in the output. I am getting the following error
    "- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
      <SAP:P1>,IHS_BS</SAP:P1>
      <SAP:P2>,com_IHS_B07_BS,,</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>"
    My port and receiver are mentioned in "IDXNOALE" so that I can ignore the Acknowledgments. Please help as the error still persists..
    Thanks
    Anju

    Try this thread:
    ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5

  • IPad+iMessage 'error occured during activation'

    hi there.
    i'm trying to connect my ipad to my imessage account which i have on my iphone.
    I've researched the problem and i have updated onto the latest iOS 7 update, reset network setting back to factory, put time to auto (everything short of wiping my ipad completely which im reluctant to do)
    can anyone help me as my iphone tends to run out of battery mid conversation and obviously that's inconvenient
    thank you!!! 

    I assume that you saw this troubleshooting article, but did you see that you should toggle the settings on and off for Messages after each attempt?
    If you see "Waiting for Activation", "Activation unsuccessful", or "An error occurred during activation"
    These messages occur when your iPhone is trying to activate your phone number with iMessage or FaceTime.
    To resolve these status messages, follow these steps. After each step, turn FaceTime and iMessage off and on again in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Make sure that you have a cellular network connection with your cellular provider. You need a cellular network connection to activate iMessage and FaceTime with your iPhone phone number.
    Go to www.apple.com in Safari to make sure that you have a data connection. You need a data connection to activate iMessage and FaceTime with your iPhone phone number.
    Make sure that you can send and receive SMS. You need a valid SMS messaging plan to activate FaceTime and iMessage.
    Make sure that FaceTime hasn't been restricted: tap Settings > General > Restrictions > FaceTime.
    Set iPhone to the correct time zone: tap Settings > General > Date & Time.
    Note: If Set Automatically is on but the incorrect time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
    Contact your carrier to verify that there are no restrictions, blocks, or filters on text messages. Restrictions, blocks, or filters on text messaging will prevent iMessage and FaceTime registration from completing.
    If "Waiting for Activation" still appears after you perform these steps, turn FaceTime and iMessage off and on in Settings > Messages and Settings > FaceTime. You may need to wait up to 24 hours to complete activation. Most attempts will take less than an hour, but some attempts may take up to 24 hours. If your issue isn't resolved after 24 hours, please contact Apple for assistance. If you've recently performed a remote wipe on your iPhone, wait 24 hours from the time you performed the remote wipe, and then turn iMessage off then back on.You can still activate iMessage and FaceTime with your Apple ID when these status messages appear. You can see that you've activated FaceTime and iMessage with your Apple ID by tapping:
    Settings > FaceTime > You can be reached by FaceTime at:
    Settings > Messages > Send & Receive > You can be reached by iMessage at:

  • Iam getting an Error [Error occured during activation process]

    Hi ALL,
    Iam trying to load the data in DSO from CSV file,I am facing an Error as [Error occured during activation process] please suggest
    Thanks & Regards
    Sameer Khan

    Hi Sameer,
    let us play the gussing game as there is no clear error statement...
    Activation error: May be due to some special character (like # ! etc), you can include them in RSKC or correct that record from PSA.
    SID Error: Load and Activate your Master Data.
    There may be lot many situations...hope to have your exact error posted so that more elobrate help can be provided.

  • Length error occurred during in IMPORT statement

    Dear Friends,
    (length error occurred during in IMPORT statement),when im using the SUBMIT syntax..can i know what is the reason.
    Thanks
    Rajkumar.A

    Hello,
    I would like to know how did you solve the issue as i came across the same issue.
    Thanks,
    FBK

  • RC-00118: Error occurred during creation of database

    adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
    The environment settings are as follows ...
    ORACLE_HOME : /u04/d01/tech_st/11.2.0
    ORACLE_SID : JCLONE
    TWO_TASK :
    PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
    LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
    Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
    The log information will be written to
    /u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
    Creating the control file for JCLONE_oracle database ...
    SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1071333376 bytes
    Fixed Size 1348968 bytes
    Variable Size 427821720 bytes
    Database Buffers 629145600 bytes
    Redo Buffers 13017088 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01159: file is not from same database as previous files - wrong database id
    ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
    ERROR at line 1:
    ORA-01109: database not open
    ORA-01507: database not mounted
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1071333376 bytes
    Fixed Size 1348968 bytes
    Variable Size 427821720 bytes
    Database Buffers 629145600 bytes
    Redo Buffers 13017088 bytes
    Database mounted.
    BEGIN dbms_backup_restore.zeroDbid(0); END;
    ERROR at line 1:
    ORA-01119: error in creating database file
    '/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
    ORA-06512: at line 1
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1071333376 bytes
    Fixed Size 1348968 bytes
    Variable Size 427821720 bytes
    Database Buffers 629145600 bytes
    Redo Buffers 13017088 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01159: file is not from same database as previous files - wrong database id
    ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
    ERROR at line 1:
    ORA-01109: database not open
    Error Running create/replace library with adupdlib.sql
    ORA-01109: database not open
    PL/SQL procedure successfully completed.
    File created.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    exit_code=0
    Checking for errors ...
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected.
    ORACLE instance shut down.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    .end std out.
    .end err out.
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : oracle
    sDbDomain : jtl.co.ke
    sDbPort : 1524
    sDbSid : JCLONE
    sDbUser : apps
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
    Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
    Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
    Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    RC-00118: Error occurred during creation of database
    Raised by oracle.apps.ad.clone.ApplyDatabase
    StackTrace:
    java.lang.Exception: Control file creation failed
    at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
    at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
    at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
    at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
    at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
    at java.lang.Thread.run(Thread.java:595)
    Current database Version is 11.2.0.2
    Apps Version is 11.5.10.2
    RUP version is 6
    Forms Patchset version is 19
    Please advise how to resolve this error ?
    Regards
    Mohammed.

    Please refer to these docs/links.
    Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
    Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Error 1935 an error occurred during installation of assembly component

    I get this message when trying to install Lightroom 4.3
    error 1935. an error occurred during installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}  hresult 0X800700C1
    I've tried installing with antivirus software shut down.  I've reset the file system transaction log.  I turned off the .net framework v 3.0 in the programs and features section of control panel.  The only thing I haven't tried is deleting the .net framework because the other articles were unclear as to exactly what and how to delete them. 
    Please help!

    that looks like an ms error.
    attach a screenshot, if you're not sure.

Maybe you are looking for