Error occurred during post handling RS_AFTER_IMPORT for UPDR L

Hi friends,
I need your help for 2 issues related to transport
I am getting error while transporting the request from BW DEV to BW QAS..Please help me regarding this issue..
1.)Error occurred during post handling RS_AFTER_IMPORT for UPDR L
       The errors affect the following components:
      BW-WHM (Warehouse Management)
2.)Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
       Error when activating update rule
       IC=0CRM_PROD IS=0PR_IL_PROREF_ATTR error when checking update rules.
Friends these are the two issues im facing while doing the transports._i have checked the update rules in the BW DEV it is working fine._please give some solutions to overcome this issues.
Thanks
Gnana Baskar

Hi Gnana,
Since u r telling tht the update rules are working fine in the Dev system, request u to perform some checks:
1. The Update rule needs to be in active version.
2. The InfoObjects used in the target InfoProvider should be present in the QA system/attached to the request in which u r transporting the changed Update Rule.
3. Manually add objects, if needed all the Before/After objects in the new request and reactivate the Update rule, if it asks for a request give this new request number.
4. Compare the data model in Dev and QA system and try finding the disconnect between them.
Hope this helps.
Regards,
Kunal Gandhi

Similar Messages

Transport Error occurred during post-handling RS_AFTER_IMPORT for ISCS L

Hi,
We are moving cube 0IC_C03 of material stocks/movements
from Dev to Quality and we are facing problem while transporting the Transfer Structure 2lis_03_BF. Other two TS moved successfully.
The transporting is failing with the below error:
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L"
We tried moving couple of times , still it was failing with the same error and even we tried to activate in Quality with the activate program .It say " there is no Transfer structure to activate.".
BW system is 3.1 c with service pack 18.
Your help greatly appreciated
Thanks,
Sudharani

Hi there,
Have you checked that DataSource is activated and replicated in your R3 Quality system? Check in BW for your source system if 2LIS_03_BF is there.
Hope this helps,
Regards,
Carlos

Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR

Hi,
I have to import composite role from development to QAS system.I have generated profile for each role in developemnt & create transport of composite role & moved it in QAS.But in QAS it finished with Return code 8 & I found profiles are not moved in QAS for all single roles.
Error is as follows.
Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Please advice if anybody faced such kind of issue.
Regards
Santosh

Rephrased a'la Julius:
> To avoid the problems during the subsequent import into a target client, the AGR_NUM_2 table can be maintained as customizing for the clients (plural) in the source development system where the roles are maintained. If more than one client is used for role development, a number range gap of 50000 between the clients should be sufficient to prevent profile name collisions (otherwise you have much bigger problems anyway...).
>
> This is because the system ID (sy-sysid) is used as an attribute in the generated profile's name, but not the client (sy-mandt). > The value set in the AGR_NUM_2 tables determines the current number per client of the next sequential number to be used for profile generation. The customer can initialize this number to insert an additional attribute per client to achieve unique generated names within client specified ranges.
Something like that
Cheers,
Julius

Error occuring during activation on iMessage for my ipad

I am trying to recover my old text messages and when I am trying to log in on my iPad there's error occurring during activation. Please help.

I have raised this issue with apple support this week too after my Facetime and iMessage stopped working on Saturday.
Been very interesting to read the ever increasing number of comments and issues being raised on this one (more than 500 views and dozens of replies so far).
My post is here:
imessage and Facetime sign in activation error iPad ios8.1.2
What is especially interesting about your post is that you had your iPad Air replaced in November 2014 in the UK. I bought my iPad Air originally in October 2014, and had to have it replaced in an Apple Store in Bristol in November after the original stopped charging. This does make me wonder if there is a batch of faulty iPads? Mmm...
I have raised a fully escalated support case with Apple on this, and their latest response is that a 'patch' or fix is being investigated by their engineers and to wait a week or so at which point they might be releasing it to affected users - or even across every users.
I wish there was a way to get this to Apple's attention and the wider media as well, but I don't know how best to do that.
I guess the best thing we can do is keep hassling Apple for a response and raising support cases

Error occuring during import of certificate for SSO configuring in BI

Hi,
I am configuring the SSO with logon ticket for BI system.
I downloaded the certificate from portal server.
But while importing this certificate on R/3 server it shows error
"Error occurred during import"
Message no. TRUST008
Please suggest me any solution on it.
Thanks & Regards,
Vishal.

Hi Vishal,
Probably the certificate already exists - see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0077873d-0b01-0010-1abb-cfbf21d1aa43 page 4.
Hope it helps
Detlev

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

"An error occurred during activation. Try again." Can't log into iMessage on Macbook for past two weeks.

iMessage worked fine on my Macbook until about two weeks ago. I can use iMessage for gMail, but my iCloud account is inactive and I get the error message "An error occurred during activation. Try again." when I try to log in with any apple ID. It works fine currently on my iMac and my iOS devices.
I have tried many suggestions, including checking the serial number, various time & date configurations, trying an alternate Apple ID, restarting, signing in and out of iCloud, and inspecting the keychain.

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Reset the NVRAM.
Step 12
Reinstall OS X.
Step 13
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

HT2311 error occured during the installation of assembly 'Microsoft.VC80.CRT.type="win32.version="8.050727.6195",publicKey Token="Ifc8b3b9a 1e 18e3b",processorArchitecture="x86"". Please refer to Help and Support for more information. HRESULT:0x80070005.

Dear all please explain how to solve my problem while installation of my win 8 laptap. The following error message is coming as uder:
error occured during the installation of assembly 'Microsoft.VC80.CRT.type="win32.version="8.050727.6195",publicKey Token="Ifc8b3b9a 1e 18e3b",processorArchitecture="x86"". Please refer to Help and Support for more information. HRESULT:0x80070005.
Pl explain as early as possible.
Thanking for your early reaction.
From
Chevuri

Your desired fast response is more likely if you had posted this in the WIndows forum, not the iTunes for Mac forum. I will request it be moved.

Error occured during selection for the DS 0CRM_SALES_ACT_1 in RSA3.

Hi Experts,
I have transported the DS - 0CRM_SALES_ACT_1 i from Dev. to QA system and in RSA3 it throwing an error message saying that 'error occured during selection'.
I have checked the respective tables of this datasources all the records are there and also check the table SMOXHEAD_S and the table is not having this datasource.
Any idea why the error is coming and is this because of the table SMOXHEAD_S empty for this datasource.
OR
Shall i activate this DS using RSA5 tcode in the development system and then create a new request and tranport the request to QA system?...Shall we do this in the development system?.
Thanks in advances for yousuggestion.
Regs,
VACHAN

Hi Vachan
The entry in SMOXHEAD_S for your datasource must match the entry in SMOXHEAD exactly.   Check in your dev box to be sure - the entry is there but it is missing in QA.
I wrote this program which copies the entry from SMOXHEAD to SMOXHEAD_S.
Run the program at your own risk your CRM QA box. If the entry is there already then it will do nothing.
Please post to say if it works for you.
Good luck,
Guy
report zbi_fix_extractor.
data: ld_datasource type smoxhead-datasource value '0CRM_SALES_ACT_1',
        ls_smoxhead   type smoxhead.
*.check that the smoxhead_s table is empty
select single * from smoxhead_s into ls_smoxhead
    where datasource = ld_datasource.
if sy-subrc ne 0.
*..only do if there was no entry in the shadow table
    select single * from smoxhead into ls_smoxhead
      where datasource = ld_datasource.
    if sy-subrc eq 0.
       insert into smoxhead_s values ls_smoxhead.
    else.
       write 'no data available in SMOXHEAD for datasource'.
    endif.
else.
      write 'no change made: entry already in SMOXHEAD_S'.
endif.

"An error occurred during upload" iMovie for iOS

HI, I was wondering if anyone could help? I was trying to make a movie for my Father's 67th birthday. I created the movie with a mixture of videos and photos from my phone, with some text on some and some music to accompany it. When I try to "save to camera roll" it comes up with the message, "An error occurred during export". I have no idea why this is happening. I have tried all the other options - YouTube, Facebook, iMovie theatre, and they all don't work. With those options the say that the movie is uploading but it doesn't actually do anything. Fortunately I was able to show him through AirPlay and previewing the movie but I want it on my camera roll so that he can have a copy and my family can. Anybody got any suggestions? This is an example of what it shows me!

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

Error occured while posting the job schedule for JDBCAdapter

Hi Experts,
In Application Log in Path: "/usr/sap/<SID>/DVExxxx/j2ee/cluster/server1/log", I see the error:
#/Applications/ExchangeInfrastructure/AdapterFramework/Services/Util
##com.sap.aii.af.service.scheduler.SchedulerManagerImpl.postJobScheduleOthers(String, int)
#J2EE_GUEST#0##n/a##f7956e1f6b4711e0b851001e0b5d3ac8#SAPEngine_Application_Thread[impl:3]_23##0#0
#Error#1#com.sap.aii.af.service.scheduler.SchedulerManagerImpl#Plain
###error occured while posting the job schedule for JDBCAdapter_9f0584b1bcb33b94b67ada456233bcb8 with 2#
Frequently are created Lock's and I need remove them in Visual Admin.
Any idea about this error?
Tks in advance.

Hi,
After applying the SP 23 Patch Level 08, LOCK JDBC problems stopped.
But now when a network error or database error, the JDBC Sender Communication channels that were open to connection, are blocked.
Even following the instructions in [SAP Note 1083488 - XI FTP_JDBC sender channel stop polling indefinitely (04_04S)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083488] the problem continues.
I've already set the parameter "taskTimeout" and selected the option "Disconnect from Database After Each Message Processing" but not resolved.
Any ideas?
Thanks in advance.

I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

An error occurred during the installation of assembly 'policy e0.Microsoft.VC80.CRT.type="win32-policy" version "8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'. Please refer to Help and Support for more information. H

An error occurred during the installation of assembly 'policy 80.Microsoft.VC80.CRT.type="win32-policy" version+"8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: x...
Encountered during reinstall of iTunes. Any ideas?

It is a big issue for many users. There is no clear fix yet, but some users have had success with some of the solution on this thread.
https://discussions.apple.com/message/16751339#16751339

Help "An error occured during the installation of assembly 'Microsoft.VC.80.CRT,version="8.0.50727.4053",type="win32".publicKeyToken="1fc8 b3b9a1e3b".process orArchitecture="x86"".Please refer to Help and Support for more information. HRESULT: 0x800736FD.

Help - I keep getting this message when trying to install iTunes on my computer - I have tried it on 2 different computers - one with Windows 7 and one with Vista - getting same message for both.
"An error occured during the installation of assembly 'Microsoft.VC.80.CRT,version="8.0.50727.4053",type="win32".publicKeyToken="1fc8 b3b9a1e3b".process orArchitecture="x86"".Please refer to Help and Support for more information. HRESULT: 0x800736FD.
Thanks

HRESULT: 0x800736FD
Are you running Vista or Windows 7, josh?

Error occurred during post handling RS_AFTER_IMPORT for UPDR L

Similar Messages

Maybe you are looking for