Error occurred during search

Hello,
I'm getting the following error when I use the search in the Portal:
Error occurred during search: com.sapportals.wcm.WcmException: error: communication with preprocessor failed;index=teste,location=cdphl815:30203 (Errorcode 42)
That's probably an indexing error:
Indexing document failed. Preprocessor: failed (Errorcode 6800)
But I don't know what to do to fix this.
Please... help me!!
Thanks
Luisa

Hi Luisa,
It might help:
Trex Administration Tool:
http://help.sap.com/saphelp_erp2004/helpdata/en/23/92bd4016c0cc38e10000000a155106/frameset.htm
General TREX Configuration :
http://help.sap.com/saphelp_erp2004/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
Post-Installation Activities :
http://help.sap.com/saphelp_erp2004/helpdata/en/8b/1cc83edf72e16be10000000a114084/frameset.htm
Hope it helps,
Yoav

Similar Messages

WM: Error occurred during storage section search (FGWM05 001)

HI friends
              i done GRN 101(movement type) with mb31 for production order ..based on TR Iam trying to create transfer order i have
the below error. where i missed the configuration
"Error occurred during storage section search (FGWM05 001)"
    Message no. L3 041
Diagnosis
    No storage area search has been defined for this material and this
    storage type.
Procedure
    Contact your system administrator! Note down the material and the
    storage type listed within parentheses in the error message.
with regards
dinesh
Edited by: code acess on Jun 28, 2011 8:30 AM

Hi
In WM customizing Please check for your warehouse/Storage type combnation the storage section search is on and valid.
IMG>Logistics Execution>WM>Strategies>Storage section search
if there is no entry then maintain it. The nest error may be storage bin. Make sure that you create storage bin for whsno/storage type/storage section combination by using LS10 or LS01N)
Hope it helps
Karthik

Getting error as "Error occurred during your search, contact your system administrator" while using talent search in portal (TREX)

Hello Experts,
     We are facing an issue like when our Talent specialist are trying to use talent search through their portal they are getting an error like "Error occurred during your search, contact your system administrator" as shown below.
     We have checked in our backend and for all the talent specialist search results are showing successfully.
     Anyone of you kindly help us to get this sorted out.
Thanks & regards,
Sakthi

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

RC-00118: Error occurred during creation of database

adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.

Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Error occurred during Oracle Enterprise Manager 12c (12.1.0.3) installation

Hello all,
I ran into some error during installation. And I need your help in solving this problem. The error occurs during Step Configure (Configuration assistant "Repository Configuration" has failed) and the Repository Configuration in the Installation Progress Details view.
And the error is shown below is from ViewLog and from the terminal where I launched runInstaller. Thank you all in advance for your helps.
ViewLog:
INFO: oracle.sysman.top.oms:Completed Prereq check
INFO: oracle.sysman.top.oms:The plug-in Plugins Prerequisites Check has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Repository Configuration
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.RepositoryConfiguration
INFO: oracle.sysman.top.oms:Classpath = /test/vince/em_install/oem_mgr/oms/sysman/jlib/emprereqkit.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emCoreSDK.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/omsConfig.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emcore_client.jar:/test/vince/em_install/oem_mgr/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcucommon.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emagentSDK.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcu.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Inside perform method
INFO: oracle.sysman.top.oms:Running the Schema Action...
INFO: oracle.sysman.top.oms:Setting required properties
INFO: oracle.sysman.top.oms:REPOS_USER: SYSMAN
INFO: oracle.sysman.top.oms:SYS_USER: SYS
INFO: oracle.sysman.top.oms:CONNECT_STRING: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:ORACLE_HOME: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:mgmtTabLoc :
INFO: oracle.sysman.top.oms:confDataTabLoc :
INFO: oracle.sysman.top.oms:defaultDataFileLoc :
INFO: oracle.sysman.top.oms:ad4jDataTabLoc :
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:The required parameters are set for schemamanager
INFO: oracle.sysman.top.oms:Starting both repos upgrade and transx loading in parallel
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: create oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:create_process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:The command run for transx is /test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) -action transx -repos_user SYSMAN -dbUser SYS -mwHome /test/vince/em_install/oem_mgr -mwOraHome /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:processing arguments
INFO: oracle.sysman.top.oms:compiling arguments for validation
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms: Enter SYSMAN repository password :
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:Verify :
INFO: oracle.sysman.top.oms:Enter password for: SYSMAN
INFO: oracle.sysman.top.oms:   done checking required user credentials...
INFO: oracle.sysman.top.oms:done creating arguments...
INFO: oracle.sysman.top.oms:creating logger..
INFO: oracle.sysman.top.oms: Connection exception in action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: no action logger file name from previous session
INFO: oracle.sysman.top.oms: action logger filename after search: emschema.log
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:already exists: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:oracleHome: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:connect_string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:done connection validation without error
INFO: oracle.sysman.top.oms:action to perform is: transx
INFO: oracle.sysman.top.oms:action to be performed:TRANSX
INFO: oracle.sysman.top.oms:action is transx - non RCU based action
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log.TRANSX
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms:newly created: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:process_id:132hgzixoqx34
INFO: oracle.sysman.top.oms:Initialization...
INFO: oracle.sysman.top.oms:Driver: oracle.jdbc.driver.OracleDriver
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:transx_retCode:255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-65096: invalid common user or role name
File:/test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql
Statement:CREATE USER SYSMAN IDENTIFIED BY ****** DEFAULT TABLESPACE MGMT_TABLESPACE   QUOTA UNLIMITED ON MGMT_TABLESPACE TEMPORARY TABLESPACE TEMP
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
Terminal:
PLUGIN_DEP_LIST={}
PLUGIN_PURGE_LIST={}
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 5
Percent Complete: 30
Percent Complete: 55
Percent Complete: 80
RCU-6130:Action failed - RCU-6134:Error while trying to execute JDBC action.
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor                      : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Connected As                    : SYS
RCU Logfile                     : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/rcu.log
RCU Checkpoint Object                   : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component                       Status Logfile
EM Repository Creation Configuration            Failed No log created
EM Repository Init Configuration                Failed No log created
EM Repository Common            Failed /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/em_repos_common.log
Repository Creation Utility - Create : Operation Completed

You are using DB12 as EM repository which is not certified. From the log, ORA-65096: invalid common user or role name , some people have reported similar issue while using DB12 as their repository.
If this not the case then log an SR with oracle support and upload the logs:
- $ORACLE_HOME/sysman/log/schemamanager zipped
- $ORACLE_HOME/cfgtoollogs/ zipped
- central inventory logs

Problem: An error occured during the uploading process.

Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.

Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png

FATAL ERROR occurred during installation

Trying to install a HP Officejet 4500 G510g-m onto a HP Desktop PC with Windows Vista.
Error message reads:
Fatal error message during installation
An error occurred during installation of assembly
'Microsoft.vc90.MFC,version="9.0.21022.8",publickeytaken=1fc8b3b9 a1e18e3b",processor architecture="x86",type="win32".'
"Fatal error"
"MSI.netdevicemanager40"
Error logs reads:
+0000000000000958722048/s/Now launching=x:/hpzmsi01.exe -m netdevicemanager40 -I xxx -f 'x:/hpwwins26.dat" - validate No at" -validate No
X:/Network64.msi failed with return code 1603
When searching for the code 1603, I found a trouble shooting number (c02455020)
When I run the program regsvr32 Atl.dll it came up with
DII Register Server failed with error code 0x2002801c
But the com product was already registered, the computer has been re-started 12 times. So I cannot understand why I cannot install the complete printer, why is telling me that only the basics can be installed. I purchased and ll-in-one because I need it all not just a printer.
Be so kind to enlighten me.
My father's patience has ended, and before he packs it back into the box, I am willing to troubleshoot it with you.
Please help.
Thank you.

Hello Techiizz
Try the following article. It covers the Fatal Error 1603 and should help resolve your problem.
MSI Fatal Error 1603
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Error occurred during character conversion in SXMB_MONI

Hello Experts,
Good Day!
I would like to seek your help here. When i used tcode SXMB_MONI to search for messages i get this error : Error occurred during character conversion.
So far no problem with the program. Its work for all other dates. Just for one particular day and specific time period, im geting this error.
Does anyone know what is this error means? Please reply..
Thanks for your help.
Looking forward for ur replies..

Hi Presheela,
Basically this problem occurs when ur payload contains any special characters like '&' ,'>'...etc .So you have to take care of how to deal with these characters in XI.
Refer the following documentation:
How to Work with Character Encodings in Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Regards,
Vinod.

An error occured during the executin of the DETERMINE_ENGINE_RELEASE i

Hi,
         while installing EHP1 on java(Netweaver 2004s) using EHPInstalled we are stopped with this error in configuration stage
An error occured during the executin of the DETERMINE_ENGINE_RELEASE phase could not detect as java release return code condition sucess evaluate to false for process java for ACTION_VERSION
Please help us how to resolve this issue.
Thanks in Advance

Hi,
I am getting the same error while upgrading to EHP4 and so not starting a seperate thread...
I am pasting the log...
Kindly suggest...
This file is DETERMINE_ENGINE_RELEASE_DER_01.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[/softcd_dump/EHPI/java/log/DETERMINE_ENGINE_RELEASE_DER_01.LOG]/>
<!PATTERN[DETERMINE_ENGINE_RELEASE_DER_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Feb 9, 2010 9:41:22 PM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_ENGINE_RELEASE has been started.
Feb 9, 2010 9:41:22 PM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDetectEngineRelease.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:73) [Thread[main,5,main]]: Checking AS Java release using version command.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:146) [Thread[main,5,main]]: The tool has not been found in location: /usr/sap/D50/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:80) [Thread[main,5,main]]: Checking AS Java release using jspm tool.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:114) [Thread[main,5,main]]: The tool have been found in location /usr/sap/D50/DVEBMGS00/j2ee/JSPM.
Feb 9, 2010 9:41:22 PM [Info]:       com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41) [Thread[main,5,main]]: AS Java process ID 4, name com.sap.sdt.jspm.main.Jspm has been started.
Feb 9, 2010 9:41:22 PM [Info]:       com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54) [Thread[main,5,main]]:   Command line: /softcd_dump/EHPI/jvm/jre/bin/java -cp .:/usr/sap/D50/DVEBMGS00/j2ee/JSPM/lib/sdt_jspm.jar com.sap.sdt.jspm.main.Jspm -rootdir=/usr/sap/D50/DVEBMGS00/j2ee/JSPM -v
Feb 9, 2010 9:41:22 PM [Info]:       com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55) [Thread[main,5,main]]:   Standard out: /softcd_dump/EHPI/java/log/JSPM_ACTION_VERSION__DER_01.OUT
Feb 9, 2010 9:41:22 PM [Info]:                      com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:142) [Thread[main,5,main]]: Process ID 4 has been started.
Feb 9, 2010 9:41:22 PM [Info]:                     com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:198) [Thread[main,5,main]]: Waiting for process ID 4, name java to finish.
Feb 9, 2010 9:41:28 PM [Info]:                     com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:231) [Thread[main,5,main]]: Process ID 4, name java has been finished, exit code 1.
Feb 9, 2010 9:41:28 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Feb 9, 2010 9:41:28 PM [Error]:        com.sap.sdt.tools.procx.DefaultProcessAdapter.checkReturnCode(DefaultProcessAdapter.java:524) [Thread[main,5,main]]: Return code condition success evaluated to false for process java for action ACTION_VERSION.
Feb 9, 2010 9:41:28 PM [Error]:           com.sap.sdt.j2ee.tools.releasedetection.JSPMProcess.runVersionCommand(JSPMProcess.java:74) [Thread[main,5,main]]: Could not detect AS Java release.
Feb 9, 2010 9:41:28 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_ENGINE_RELEASE has been completed.
Feb 9, 2010 9:41:28 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/02/09 21:41:22.
Feb 9, 2010 9:41:28 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/02/09 21:41:28.
Feb 9, 2010 9:41:28 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:05.925.
Feb 9, 2010 9:41:28 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]
This is Trouble ticket.txt
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: SID
Hostname...........: saptr10
Install directory..: /usr/sap/SID
Upgrade directory..: /softcd_dump/EHPI/java
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: UNIX
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.24
Source release.....: $(/ER_CODE)
Target release.....: 710
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/DETERMINE_ENGINE_RELEASE ended in error.
Could not detect AS Java release.
Return code condition success evaluated to false for process java for action ACTION_VERSION.
More information can be found in the log file /softcd_dump/EHPI/java/log/DETERMINE_ENGINE_RELEASE_DER_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeDetectEngineRelease
com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetectionException
Could not detect AS Java release.
DETERMINE_ENGINE_RELEASE
INIT
PREPARE
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
Thanks,
RaHuL...

JSF problem - An internal error occurred during: "Updating JSP Index".

Hello Friends,
I am facing following problem in ecplise. Whenever I open JSP page or whenever I save my jsp page.
!ENTRY org.eclipse.core.jobs 4 2 2008-06-14 13:54:24.151
!MESSAGE An internal error occurred during: "Updating JSP Index".
!STACK 0
java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/TagLibraryInfo
     at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperCache.createNewHelper(TaglibHelperCache.java:112)
     at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperCache.getHelper(TaglibHelperCache.java:97)
     at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperManager.getHelperFromCache(TaglibHelperManager.java:43)
     at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperManager.getTaglibHelper(TaglibHelperManager.java:36)
     at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.addTaglibVariables(JSPTranslator.java:684)
     at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translateXMLNode(JSPTranslator.java:997)
     at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translateRegionContainer(JSPTranslator.java:843)
     at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translate(JSPTranslator.java:734)
     at org.eclipse.jst.jsp.core.internal.java.JSPTranslationAdapter.getJSPTranslation(JSPTranslationAdapter.java:131)
     at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchDocument.getJSPTranslation(JSPSearchDocument.java:112)
     at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchDocument.getPath(JSPSearchDocument.java:149)
     at org.eclipse.jst.jsp.core.internal.java.search.JavaSearchDocumentDelegate.<init>(JavaSearchDocumentDelegate.java:30)
     at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchSupport.createSearchDocument(JSPSearchSupport.java:401)
     at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchSupport.addJspFile(JSPSearchSupport.java:295)
     at org.eclipse.jst.jsp.core.internal.java.search.JSPIndexManager$ProcessFilesJob.run(JSPIndexManager.java:262)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:58)
I am using Ecplise 3.2.0
JSF 1.1
Tomcat 5.5
JSP2.0
Any solution for this?
Thanks & regards
Abhijai

Abhijai wrote:
java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/TagLibraryInfoThis exception is been thrown if the given class was available in classpath during compile time, but not during run time. The solution is obvious: make sure that the given class (or at least the JAR file with the given class) is available in the classpath during run time.
By the way, why did you think that this problem is related to JSF?

Error 1935.An error occurred during the installation of assembly 'Microsoft.VC90.ATL or 'Microsoft.VC80.ATL'

The OS is Windows Server 2008 R2
I can't install any programs (like backup agents) that require these components:
Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) or the
Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
I've tried unregistering the Windows Installer and reregistering it, starting from a clean boot scenario,
This is the error message:
Product: Microsoft Visual C++ 2005 Redistributable (x64) -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please
refer to Help and Support for more information. HRESULT: 0x80070BC9. assembly interface: IAssemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Seems like there are thousands of entries when you google this error but not too many solutions.
The only microsoft support KB entry that deals with this error only is for Windows 7, so the Fix It tool can't be run:
http://support.microsoft.com/kb/970652

Hi All
I have the Same_D_n_Problem.... However, I WAS able to download and install the VC++ 2005 Redist x_64 after removing the one that was there.... Didn't help :(
Tried removing, then installing using a CleanBoot - no luck
REinstalled VC++2005 Redist. No problem but cannot install SQL 2008 R2
Soooo... have traced the SQL Installer log file - and one can get to the entry by searching for 1935 - then looked back for what I think is the begining of the problem - I have marked this with ********************* here is the LogFile excerpt:
2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\Services\SSIS Server - OK.
2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA - OK.
2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA\CurrentVersion - OK.
2010-12-29 22:08:59 Slp: ------------------------------------------------------------
2010-12-29 22:08:59 Slp: D:\SQLInstal\x64\FixSqlRegistryKey_x86.exe exit code: 0
2010-12-29 22:08:59 Slp: Completed Action: FixSqlRegistryKey, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: PostMsiTimingConfigAction
2010-12-29 22:08:59 Slp: The object state property 'workflow' is null/empty. *********************
2010-12-29 22:08:59 Slp: Error: Action "PostMsiTimingConfigAction" failed during execution.
2010-12-29 22:08:59 Slp: Completed Action: PostMsiTimingConfigAction, returned False
2010-12-29 22:08:59 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: ExecuteCloseWorkflow
2010-12-29 22:08:59 Slp: Workflow to execute: 'CLOSE'
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Skipping Action: ProduceStatusLogs
2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
2010-12-29 22:08:59 Slp: Condition "Is the datastore flag /Scenario/GlobalFlags/AreProductFeaturesSupported set" did not pass as it returned false and true was expected.
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: FinalizeProgressStatus
2010-12-29 22:08:59 Slp: Completed Action: FinalizeProgressStatus, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: RebootMessageAction
2010-12-29 22:08:59 Slp: Completed Action: RebootMessageAction, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Skipping Action: FinishPage
2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to EditionUpgrade" did not pass as it returned false and true was expected.
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Skipping property RequireMode of class: StopAction
2010-12-29 22:08:59 Slp: Input of property will not be set due to the following failed restriction(s):
2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to ComponentUpdate" did not pass as it returned true and false was expected.
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: CloseUI
2010-12-29 22:08:59 Slp: Stop Action
2010-12-29 22:08:59 Slp: Completed Action: CloseUI, returned True
2010-12-29 22:08:59 Slp: Completed Action: ExecuteCloseWorkflow, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: PassPidBackFromComponentUpdate
2010-12-29 22:08:59 Slp: Pass the flag CuPidDisplayed to the main setup
2010-12-29 22:08:59 Slp: ENU value specified, trying to pass the value to main setup
2010-12-29 22:08:59 Slp: PID value specified, trying to pass the value to main setup
2010-12-29 22:08:59 Slp: SQMREPORTING value is specified in CU workflow, trying to pass the value to main setup
2010-12-29 22:08:59 Slp: Completed Action: PassPidBackFromComponentUpdate, returned True
2010-12-29 22:08:59 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2010-12-29 22:08:59 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2010-12-29 22:08:59 Slp: Sco: Attempting to get registry value CustomerFeedback
2010-12-29 22:09:00 Slp:
2010-12-29 22:09:00 Slp:
2010-12-29 22:09:00 Slp: ----------------------------------------------------------------------
2010-12-29 22:09:00 Slp:
2010-12-29 22:09:00 Slp: Error result: -2068052081
2010-12-29 22:09:00 Slp: Result facility code: 1212
2010-12-29 22:09:00 Slp: Result error code: 1935
2010-12-29 22:09:00 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey
2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
2010-12-29 22:09:00 Slp: Sco: Attempting to get registry value DW0201
2010-12-29 22:09:22 Slp: Submitted 1 of 1 failures to the Watson data repository
2010-12-29 22:09:22 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2010-12-29 22:09:22 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2010-12-29 22:09:22 Slp: Sco: Attempting to get registry value CustomerFeedback
Would be great to hear others' thoughts on this
Cheers
Martin

An error occurred during the initialization of the view manager - Web IC

We just upgraded our CRM Dev system from 4.0 to 5.0. We've already done this once on our Sandbox. However, in our Dev environment, I execute CRM_IC. Select my profile and then get an exception.
An error occurred during the initialization of the view manager
An exception has occurred
Exception Class CX_SY_REF_IS_INITIAL
Text: Dereferencing of the NULL reference
Program: CL_BSP_WD_VIEW_MANAGER========CP
Include: CL_BSP_WD_VIEW_MANAGER========CM003
Source Text Row: 86
This is the line of code that the exception occurs. I debugged through, but not sure what the problem is.    It seems like it should have something to do with the runtime profile, but I can't seem to find anything wrong. This problem doesn't happen in the sandbox, but we are on a slightly higher support pack in our Development environment.
    get own initial rep view reference
      INITIAL_REP_VIEW = REPOSITORY->GET_INITIAL_VIEW( ).
Any ideas? I've already search OSS.
Thanks, Cat

Thirumala,
Thank for your reply. I already recompiled CRM_IC. I'm trying to execute the standard Webclient and still getting the error. I also reactivated CRM_IC_DT_REP and CRM_IC_RT_REP, but no luck.   I went to SICF and made sure all the services starting with CRM_IC were activated too. Any other suggestions?
Thanks,
Cat

IMessage A error occurred during activation

iMessage an error occurred during activation - when trying to log into imeesage

TThere's a long thread on this forum about your problem but you will have to search for it.

Error occurs during the rendering of jsp component log file?

Hello. I am having troubles on locating the log file for this particular error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Error occurs during the rendering of jsp component.
Exception id: 11:59_31/07/07_0004_19351950
See the details for the exception ID in the log file
I searched all folders on my drive, using the exception id as keyword to search files that contains part of the id (0004_19351950), but to no avail. I wanted to see the log for me to identify the problem. Any ideas where I can look for it? or, better yet, what can be a solution to this runtime error?
I'm using the 2004s developer environment version. Thanks in advance.

hi Arnold,
Go to Java Developer role -> expand Portal Tools folder -> click on Portal Logviewer. Put the exception id in the text-box corresponding to search -> click on search all files. Open the file that is displayed in the search result and make a search with the id again to refer to the exact line.
N.B: if you don't have Java developer role, using user admin, assign that role to you first
Cheers.......

1st compile after install - Error occurred during initialization of VM

Complete message text:
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
To re-cap:
1. Install J2SE Development Kit 5.0 Update 10.
Error message received during finalization.
Error 1722. There is a problem with this Windows Installer package.
A program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor.
2. It appears to have worked. Re-install attempt says "Already installed".
3. Attempt to compile.
Basic error occurs.
See message text above.
4. Observe Registry Keys appear faulty for JDK.
For key HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Development Kit
Add Key 1.5
Add Strings JavaHome="C:\Program Files\Java\jdk1.5.0_10"
MicroVersion="2"
Add Key 1.5.0_10
(contents same as above)
Modify
Change String CurrentVersion="1.5"
5. Re-Attempt 3. Same Results.
6. Uninstall, Restart, Install again. Results of step 1 re-occur.
7. Re-Attempt 3. Same results.
8. Re-Attempt 4, then 3. Same results.
9. "Modify" via Settings+Control Panel+Add/Remove Programs.
Install Complete (!)
10. Restart.
11. Re-attempt 3. Same results.
12. FYI:
JAVA_HOME=C:\Program Files\Java\jdk1.5.0_10
CLASSPATH=.;C:\Program Files\Java\jre1.5.0_09\lib
PATH=C:\Program Files\Java\jdk1.5.0_10\bin; (various and asundry other paths)
Following file verified:
C:\Program Files\Java\jre1.5.0_09\lib\rt.jar contains java.lang.Object class file
13. Post to forum.
Thanks in advance for any help you may provide.

You have a (some?) mismatches in the machine, probably in the filesystem, environment variables, and Registry.
Recommendation:
Uninstall all Java installations. Remove residual files and directories.
Remove all classpath and other Java-related environment variables
Make sure that the path env is cleaned.
Edit the Registry - remove HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft
Scan (search) files for "java" or "sun" names and validate that the files found are one you want to keep, otherwise delete them.
Download a new copy of the offline installation version of whatever Java you want, and install - after reading the Installation Instructions.

Error occurred during search

Similar Messages

Maybe you are looking for