Error occurred during the phase IMPORT_PROPER
Hi All,
We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
SAPKITLRBA)
Also, below is the SLOG of the system:
ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
cpafisr5 20110602203531
STOP MAIN IMPORT ST6 I 20110602203833 INUP
cpafisr5 20110602203531
ERROR: stopping on error 16 during MAIN IMPORT
STOP imp all ST6 0016 20110602203833 INUP
cpafisr5 20110602203531
START MAIN IMPORT ST6 I 20110602203943 INUP
cpafisr5 20110602203943
START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
cpafist0
STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
cpafist0
START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
cpafisk0
HALT 20110602204020
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
exist!
ERROR: EXIT(16) -> process ID is: 10932
WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
The same add-on and support packages we successfully installed in its respective developement system and in other systems as well. However, request you all to kindly assist in resolving the error.
Thanks in advance.
Regards,
Indraneel Upponi
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
Does this file exist on this location ? It seems buffer insoncistency from the error message.
Regards,
Subhash
Similar Messages
-
The import was stopped, an error occurred during the phase DDIC_ACTIVATION
Dear all,
When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
The import was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPKB70019, tp step A, return code
0008
Notes on phase DDIC_ACTIVATION
In this phase the imported Dictionary objects are activated. This phase
can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called.
o TP_FAILURE: The program tp could not be executed. For more
information, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: The tp step DDIC activation could not be performed
successfully. To see the cause of the error in the activation log,
choose Goto -> Log -> Queue.
If you import two or more Support Packages in one queue, and you do
not activate them in the correct sequence, activation errors may
occur. In this case, the activation errors disappear when you repeat
the activation run. To do this, choose Support Package -> Import
Support Package Queue.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
Hope anyone can help. Thanks!
B.R
MichaelP762713 wrote:>
> Hi ,
>
> This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
>
> these were the structure deleted from system afterwards patches were installed successfully.
>
> /1PYXXFO/SAP_PAYSLIP_____L0001
> /1PYXXFO/SAP_PAYSLIP_____T0001
> /1PYXXFO/SAP_PAYSLIP
>
> /1PYXXFO/SAP_PAYSLIP_____L0020
> /1PYXXFO/SAP_PAYSLIP_____T0020
>
> You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
>
> Thanks..
> Mohit
>
> Edited by: mohit gupta on Sep 23, 2009 9:15 AM
Hi, mohit
I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
A part of the queue log as below:
Field name KEY is reserved (Do not use structure as include in DB table)
Field name PRIOR is reserved (Do not use structure as include in DB table)
Field KEY: Component type or domain used not active or does not exist
Exactly one field SPRAS of type LANG: Selection as text language possible
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name KEY is reserved (Do not use structure as include in DB table)
Field name PRIOR is reserved (Do not use structure as include in DB table)
Field KEY: Component type or domain used not active or does not exist
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name KEY is reserved (Do not use structure as include in DB table)
Field name PRIOR is reserved (Do not use structure as include in DB table)
Exactly one field SPRAS of type LANG: Selection as text language possible
Enhancement category for table missing
who can help me ?
thank you very much
BR.
Michael
Edited by: Michael Hong on Sep 23, 2009 12:36 PM -
Error occured in the phase MOVE NAMETABS while updating patch.
Hi Gurus
When i implementing a SP15 to SP16 in a queue, i got the Dump.
Please help me in this issue.
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package ALL, tp step "6", return code 0008
Notes on phase IMPORT_PROPER
In this phase repository objects and table entries are imported. This
phase can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called.
o TP_FAILURE: The program tp could not be executed. For more
information on this, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: A tp step could not be executed. To find the cause
of the error, see the appropriate log, such as the import log.
If the cancelation message contains a tp step 6, N or S, the step in
question is independent of the transport request. You can find these
logs under the node Import steps not specific to transport request
in the log overview.
Alternatively, you can find these logs in the following files in the
log directory of your transport directory (usually:
/usr/sap/trans/log):
- tp Step 6: P<YY><MM><DD>.<SID>
- tp Step N: N<YY><MM><DD>.<SID>
- tp Step S: DS<YY><MM><DD>.<SID>
You can display these files using the report RSPUTPRT or by calling
transaction AL11.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Regards,
GaneshHi jazz,
I want to update the patch SAPKA70016 for SAP_ABA component.
Queue log
System : ISP
tp path : tp
Version and release: 372.04.36 700
Activate inactive nametabs
End date and time : 20081215012202
Ended with return code: ===> 8 <===
TP request log is
START CMDIMPORT ISP L 20081222014354 DDIC usirs254 20081222014354043
STOP CMDIMPORT ISP L 20081222014401 DDIC usirs254 20081222014354043
START DD IMPORT ISP H 20081222014540 DDIC usirs254 20081222014540574
STOP DD IMPORT ISP H 20081222014616 DDIC usirs254 20081222014540574
START DD ACTIVATION ISP A 20081222014617 DDIC usirs254
START tp_getprots ISP J 20081222014617 DDIC usirs254
STOP tp_getprots ISP J 20081222014723 DDIC usirs254
STOP DD ACTIVATION ISP A 20081222014723 DDIC usirs254
START imp all ISP 20081222014723 DDIC usirs254 20081222014723434
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O ISP S 20081222014723 DDIC usirs254 20081222014723434
START tp_getprots ISP S 20081222014723 DDIC usirs254 20081222014723434
STOP tp_getprots ISP S 20081222014726 DDIC usirs254 20081222014723434
STOP DISTRIBUTION OF DD-O ISP S 20081222014726 DDIC usirs254 20081222014723434
INFO TBATG CONVERSION OF ISP N not needed DDIC usirs254 20081222014723434
START MOVE NAMETABS ISP 6 20081222014726 DDIC usirs254 20081222014723434
START tp_getprots ISP P 20081222014726 DDIC usirs254 20081222014723434
ERROR ALL ISP 6 0008 20081222014743 DDIC usirs254 20081222014723434
STOP tp_getprots ISP P 20081222014747 DDIC usirs254 20081222014723434
STOP MOVE NAMETABS ISP 6 20081222014747 DDIC usirs254 20081222014723434
ERROR: stopping on error 8 during MOVE NAMETABS
START INFORM SAP-SYSTEM OF ISP Q 20081222014747 DDIC usirs254 20081222014723434
START tp_getprots ISP Q 20081222014747 DDIC usirs254 20081222014723434
STOP tp_getprots ISP Q 20081222014748 DDIC usirs254 20081222014723434
STOP INFORM SAP-SYSTEM OF ISP Q 20081222014748 DDIC usirs254 20081222014723434
STOP imp all ISP 0008 20081222014748 DDIC usirs254 20081222014723434
START CMDIMPORT ISP L 20081222015155 DDIC usirs254 20081222015155637
STOP CMDIMPORT ISP L 20081222015158 DDIC usirs254 20081222015155637 -
Error occured during the execution of the JSPM_main phase
Hi,
When ever I try to Start JSPM i get the following error saying that Cannot detect system kernel under the directory c:\usr\sap\EPD\sys directory and also error occured during the execution of the JSPM_main phase.
Can any one help me in this regard.
Thanks in advance.
Thanks
VenuHi Anand,
Please find the log file below.
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\EPD\JC20\j2ee\JSPM\log\log_2007_04_03_16_57_45\JSPM_MAIN_1_01.LOG]/>
<!PATTERN[JSPM_MAIN_1_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
#1.5#C000AC190C09000000000016019B539300042D33A14D91C0#1175599679640#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:720)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:720)#Java###Phase has been started.#1#JSPM/JSPMPhases/JSPM_MAIN#
#1.5#C000AC190C09000000000017019B539300042D33A14DD040#1175599679656#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:721)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:721)#Java###Phase type is .#1#com.sap.sdt.jspm.phases.PhaseTypeJSPM#
#1.5#C000AC190C09000000000018019B539300042D33A1531000#1175599680000#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.gui.DialogController.showInitDialog(DialogController.java:560)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.DialogController.showInitDialog(DialogController.java:560)#Java###Starting Initialize dialog...##
#1.5#C000AC190C0900000000001E019B539300042D33A15C5AE8#1175599680609#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.gui.SystemInitializer.initializeDataModelAndLogging(SystemInitializer.java:462)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.SystemInitializer.initializeDataModelAndLogging(SystemInitializer.java:462)#Java###Detecting system parameters...##
#1.5#C000AC190C0900000000001F019B539300042D33A15C5AE8#1175599680609#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.trace.JspmExtLoggingManager.logReferenceToExtLog(JspmExtLoggingManager.java:167)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.trace.JspmExtLoggingManager.logReferenceToExtLog(JspmExtLoggingManager.java:167)#Java###You can find additional information in log file .#1#C:
usr
sap
EPD
JC20
j2ee
JSPM
log
log_2007_04_03_16_57_45
DETECT_SYSTEM_PARAMETERS_01.LOG#
#1.5#C000AC190C0900000000002D019B539300042D33A1AA1558#1175599685703#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.gui.SystemInitializer.initializeDataModelAndLogging(SystemInitializer.java:483)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.SystemInitializer.initializeDataModelAndLogging(SystemInitializer.java:483)#Java###Detection of system parameters has finished.##
#1.5#C000AC190C0900000000002E019B539300042D33A1AA4FF0#1175599685718#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.gui.DialogController.execute(DialogController.java:470)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.DialogController.execute(DialogController.java:470)#Java###Initialize dialog has been processed.##
#1.5#C000AC190C0900000000002F019B539300042D33A1AA4FF0#1175599685718#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.gui.DialogController.loginDialog(DialogController.java:1043)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.DialogController.loginDialog(DialogController.java:1043)#Java###Starting dialog...#1#LogIn#
#1.5#C000AC190C09000000000039019B539300042D33AA43E180#1175599830000#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.gui.DialogController.loginDialog(DialogController.java:1048)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.DialogController.loginDialog(DialogController.java:1048)#Java###Dialog has been confirmed by the user.#1#LogIn#
#1.5#C000AC190C0900000000003A019B539300042D33AA467D78#1175599830171#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.j700.deploymentmgr.DeploymentManagerImpl#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.deploymentmgr.DeploymentManagerImpl#Java###Checking connectivity for SDM server on host , port ...#2#aprins02#52018#
#1.5#C000AC190C0900000000003B019B539300042D33AA539CD8#1175599831031#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.j700.deploymentmgr.DeploymentManagerImpl#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.deploymentmgr.DeploymentManagerImpl#Java###Connection to SDM server on host , port is valid.#2#aprins02#52018#
#1.5#C000AC190C0900000000003C019B539300042D33AA65F810#1175599832234#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.deployedsdu.DeployedComponentsProvider.refresh(DeployedComponentsProvider.java:192)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.deployedsdu.DeployedComponentsProvider.refresh(DeployedComponentsProvider.java:192)#Java###Detecting components of the J2EE engine...##
#1.5#C000AC190C0900000000003D019B539300042D33AA65F810#1175599832234#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.trace.JspmExtLoggingManager.logReferenceToExtLog(JspmExtLoggingManager.java:167)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.trace.JspmExtLoggingManager.logReferenceToExtLog(JspmExtLoggingManager.java:167)#Java###You can find additional information in log file .#1#C:
usr
sap
EPD
JC20
j2ee
JSPM
log
log_2007_04_03_16_57_45
DETECT_SYSTEM_COMPONENTS_01.LOG#
#1.5#C000AC190C09000000000052019B539300042D33B5C8DEE8#1175600023265#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.trace.JspmExtLoggingManager.logError(JspmExtLoggingManager.java:275)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.jspm.trace.JspmExtLoggingManager.logError(JspmExtLoggingManager.java:275)#Java###Error during operation. For more information about the operation, see the previous message. For more information about the error, see the next messages.##
#1.5#C000AC190C09000000000053019B539300042D33B5C91D68#1175600023281#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.trace.JspmExtLoggingManager.logMaximumLogSeverity(JspmExtLoggingManager.java:258)#######Thread[main,5,main]##0#0#Warning#1#com.sap.sdt.jspm.trace.JspmExtLoggingManager.logMaximumLogSeverity(JspmExtLoggingManager.java:258)#Java###There are some WARNING messages in the child log .#1#C:
usr
sap
EPD
JC20
j2ee
JSPM
log
log_2007_04_03_16_57_45
DETECT_SYSTEM_COMPONENTS_01.LOG#
#1.5#C000AC190C09000000000054019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:748)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:748)#Java###Exception has occurred during the execution of the phase.##
#1.5#C000AC190C09000000000055019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.tools.proc.OsProcessController.startProcess(OsProcessController.java:285)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.proc.OsProcessController.startProcess(OsProcessController.java:285)#Java###java.io.IOException: CreateProcess: C:/usr/sap/EPD/JC20/exe/disp+work -V error=2##
#1.5#C000AC190C09000000000056019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.tools.proc.OsProcessController.startProcess(OsProcessController.java:284)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.proc.OsProcessController.startProcess(OsProcessController.java:284)#Java###Error while executing process C:/usr/sap/EPD/JC20/exe/disp+work.##
#1.5#C000AC190C09000000000057019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:130)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:130)#Java###Could not start process C:/usr/sap/EPD/JC20/exe/disp+work.##
#1.5#C000AC190C09000000000058019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.j2ee.tools.kernel.KernelRetriever.getCommandOutput(KernelRetriever.java:240)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.tools.kernel.KernelRetriever.getCommandOutput(KernelRetriever.java:240)#Java###disp+work executable file cannot be run.##
#1.5#C000AC190C09000000000059019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.j2ee.tools.kernel.detect.DetectKernelComponent.detectKernelComponentFromExeDirectory(DetectKernelComponent.java:767)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.tools.kernel.detect.DetectKernelComponent.detectKernelComponentFromExeDirectory(DetectKernelComponent.java:767)#Java###Could not detect current system kernel in the C:
usr
sap
EPD
JC20
exe directory.##
#1.5#C000AC190C0900000000005A019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.j630.sysinfo.ExeDirLocator.determineMultipleKernels(ExeDirLocator.java:435)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j630.sysinfo.ExeDirLocator.determineMultipleKernels(ExeDirLocator.java:435)#Java###Could not detect central instance kernel in directory C:
usr
sap
EPD
JC20
exe.##
#1.5#C000AC190C0900000000005B019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.j2ee.tools.kernel.detect.DetectKernelComponent.detectKernelComponentsFromSystem(DetectKernelComponent.java:464)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.tools.kernel.detect.DetectKernelComponent.detectKernelComponentsFromSystem(DetectKernelComponent.java:464)#Java###Could not detect system kernel under the C:
usr
sap
EPD
SYS directory.##
#1.5#C000AC190C0900000000005C019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.j2ee.tools.kernel.detect.DetectKernelComponent.detectComponentsFromSystem(DetectKernelComponent.java:554)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.tools.kernel.detect.DetectKernelComponent.detectComponentsFromSystem(DetectKernelComponent.java:554)#Java###Could not detect version information of the current system kernel.##
#1.5#C000AC190C0900000000005D019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.deployedsdu.DeployedComponentsProvider.refresh(DeployedComponentsProvider.java:220)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.jspm.deployedsdu.DeployedComponentsProvider.refresh(DeployedComponentsProvider.java:220)#Java###Could not detect deployed components.##
#1.5#C000AC190C0900000000005E019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.jspm.gui.SystemInitializer.initializeBusinessObjects(SystemInitializer.java:676)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.jspm.gui.SystemInitializer.initializeBusinessObjects(SystemInitializer.java:676)#Java###Cannot initialize application data.##
#1.5#C000AC190C0900000000005F019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:792)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:792)#Java###Phase has been completed.#1#JSPM/JSPMPhases/JSPM_MAIN#
#1.5#C000AC190C09000000000060019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:793)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:793)#Java###Start time: .#1#2007/04/03 16:57:59#
#1.5#C000AC190C09000000000061019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:794)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:794)#Java###End time: .#1#2007/04/03 17:03:43#
#1.5#C000AC190C09000000000062019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:795)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:795)#Java###Duration: .#1#0:05:43.640#
#1.5#C000AC190C09000000000063019B539300042D33B5C95800#1175600023296#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#Java###Phase status is .#1#error#
Thanks
Venu -
An error occured during the executin of the DETERMINE_ENGINE_RELEASE i
Hi,
while installing EHP1 on java(Netweaver 2004s) using EHPInstalled we are stopped with this error in configuration stage
An error occured during the executin of the DETERMINE_ENGINE_RELEASE phase could not detect as java release return code condition sucess evaluate to false for process java for ACTION_VERSION
Please help us how to resolve this issue.
Thanks in AdvanceHi,
I am getting the same error while upgrading to EHP4 and so not starting a seperate thread...
I am pasting the log...
Kindly suggest...
This file is DETERMINE_ENGINE_RELEASE_DER_01.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[/softcd_dump/EHPI/java/log/DETERMINE_ENGINE_RELEASE_DER_01.LOG]/>
<!PATTERN[DETERMINE_ENGINE_RELEASE_DER_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_ENGINE_RELEASE has been started.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDetectEngineRelease.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:73) [Thread[main,5,main]]: Checking AS Java release using version command.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:146) [Thread[main,5,main]]: The tool has not been found in location: /usr/sap/D50/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:80) [Thread[main,5,main]]: Checking AS Java release using jspm tool.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetector.detectEngineRelease(EngineReleaseDetector.java:114) [Thread[main,5,main]]: The tool have been found in location /usr/sap/D50/DVEBMGS00/j2ee/JSPM.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41) [Thread[main,5,main]]: AS Java process ID 4, name com.sap.sdt.jspm.main.Jspm has been started.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54) [Thread[main,5,main]]: Command line: /softcd_dump/EHPI/jvm/jre/bin/java -cp .:/usr/sap/D50/DVEBMGS00/j2ee/JSPM/lib/sdt_jspm.jar com.sap.sdt.jspm.main.Jspm -rootdir=/usr/sap/D50/DVEBMGS00/j2ee/JSPM -v
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55) [Thread[main,5,main]]: Standard out: /softcd_dump/EHPI/java/log/JSPM_ACTION_VERSION__DER_01.OUT
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:142) [Thread[main,5,main]]: Process ID 4 has been started.
Feb 9, 2010 9:41:22 PM [Info]: com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:198) [Thread[main,5,main]]: Waiting for process ID 4, name java to finish.
Feb 9, 2010 9:41:28 PM [Info]: com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:231) [Thread[main,5,main]]: Process ID 4, name java has been finished, exit code 1.
Feb 9, 2010 9:41:28 PM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Feb 9, 2010 9:41:28 PM [Error]: com.sap.sdt.tools.procx.DefaultProcessAdapter.checkReturnCode(DefaultProcessAdapter.java:524) [Thread[main,5,main]]: Return code condition success evaluated to false for process java for action ACTION_VERSION.
Feb 9, 2010 9:41:28 PM [Error]: com.sap.sdt.j2ee.tools.releasedetection.JSPMProcess.runVersionCommand(JSPMProcess.java:74) [Thread[main,5,main]]: Could not detect AS Java release.
Feb 9, 2010 9:41:28 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_ENGINE_RELEASE has been completed.
Feb 9, 2010 9:41:28 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/02/09 21:41:22.
Feb 9, 2010 9:41:28 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/02/09 21:41:28.
Feb 9, 2010 9:41:28 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:05.925.
Feb 9, 2010 9:41:28 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]
This is Trouble ticket.txt
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: SID
Hostname...........: saptr10
Install directory..: /usr/sap/SID
Upgrade directory..: /softcd_dump/EHPI/java
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: UNIX
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.24
Source release.....: $(/ER_CODE)
Target release.....: 710
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/DETERMINE_ENGINE_RELEASE ended in error.
Could not detect AS Java release.
Return code condition success evaluated to false for process java for action ACTION_VERSION.
More information can be found in the log file /softcd_dump/EHPI/java/log/DETERMINE_ENGINE_RELEASE_DER_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeDetectEngineRelease
com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetectionException
Could not detect AS Java release.
DETERMINE_ENGINE_RELEASE
INIT
PREPARE
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
Thanks,
RaHuL... -
Errors occurred during the extraction(Generic Extraction)
Hi All,
I am facing problems in solving BW Production issues .
The following are the Problem details.
Actually there are two Datasources connected to BW System One is from R/3 and other is from CRM.
The problem is with Delta Request which has been failed in ODS while uploading Data from R/3 in Background Scheduling but other DataSource is loading perfectly into BW System.
Its a generic extraction created based on View.
When i checked BW Side the error is displaying as follows: Error occurred in the Data Selection.
Error occurred in the Source System.
No Data has been extracted from R/3 into BW.
But when i checked R/3 (Source system)
Firslty i executed RSA7 for checking Delta Records. The records are 0 for the Datasource.
I executed RSA3 with Full UpdateMode, the number of records extracted were displayed
when i checked with Delta Update Mode its giving the following error.
Errors occurred during the extraction
Message no. RJ 012
Diagnosis
There was an error during the extraction phase of the extractor. An exception 'error_passed_to_mess_handler' has been triggered.
Procedure
Check the function module and the call from the extractor check program
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BW. The number of the records received in BW is checked against this information.
Regards,
Chakri
Message was edited by: Chakri
Message was edited by: ChakriHi,
If Idoc are already sent to BW then goto Monitor in BW and in Details tab note the Idoc no in OLTP, and goto R?3 and BD20 tcode and give the Idoc no and execute it.And see the records are came or not in BW.
Thanks
Reddy -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Problem: An error occured during the uploading process.
Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png -
I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
It then gives me an error log of ;
2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
2015-04-23 14:44:06Z: Info: Exitcode = 0
2015-04-23 14:44:06Z: Info: Logging ended.
I have installed this software succesfully on other machines previously.....Hi RyanWelsh78,
This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?) -
i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
PLEASE HELP!!
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
Hi,
I am trying to download the latest 10.0 itunes, however I keep getting this error message. I have a new iphone 4s so when I plugged it into the laptop it said i need to uninstall and reinstall the latest itunes.
I contacted support which they advised me to uninstall the itunes on my dell laptop, which I have done however I keep getting the same error message. "An error occured during the assembly "Microsoft VC80.CRT, version =8.0.50727.4053",type ="win32",publickey Tokens="1fc8b3b9a1e18e3b",process orArchitecture="x86". Please refer to help and support for more information. HRESULT: 0x800736FD.
Please can you advise on what best to do? The laptop is a 32bit windows 7.HRESULT: 0x800736FD.
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736fd, or some other number? (If they're another number, what number are you getting?) -
Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problemExactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7.
Maybe you are looking for
-
Parent-Child Unbound Transformation from Linear Structure
Hi , We need to convert the linear people structure into Parent-Child relation with unbounded depth using XQuery. To give in detail, we have the XML schema as <?xml version="1.0" encoding="UTF-8"?> <schema xmlns="http://www.w3.org/2001/XMLSchema" tar
-
My screen goes black everytime i click an app
Everytime i clcik an app it downloads but then it goes black and it send me back to my Home Page! What do i do to fix this?
-
When I charge my iPad using the cord that came with it, there's not much heat in the charger part, but if I use an extension cord with it, the charger gets almost too hot to handle. I went into the Apple store to buy a longer cord so I could charge
-
Delegated Administrator Force UID to Email local Part on account creation
I would like to force the login id on account creation to be the same as the email local part. So essentially mail local_part = uid. I think I can make the field non editable by editing the JSP and xml templates or Security.properties however I don't
-
How do I keep file menu open after CheckBox has been selected?
The following represents a written code for a menu with checkboxes. I would like the menu to stay open after a check box has been selected. Does anyone have a suggested modification for this to occur? Thanks, JR public class NewJFrame extends javax.s