Error occurred in accounting - check the costing in the ERP system

Hi Experts,
i am experiencing error in cproject preliminary costing. please refer below error.
i have the choosed the costing variant as ad hoc cost estimation in controlling for easy cost planning. i need to create a quotation from cproject.
Please sugeest me what is missing?
thanks in advance,
Prabu
Error occurred in accounting - check the costing in the ERP system
Message no. DPR_FIN_GECCO026
Diagnosis
Errors occurred in costing in the ERP system.
Procedure
Check the costing log for costing in the ERP system:
Call costing:
If it is preliminary costing, the hyperlink for calling the ad hoc cost estimate can be found in the Costing view.
If it is costing for an account assignment object (after transfer), the hyperlink for calling Easy Cost Planning can be found in the Services view.
In costing, choose Revaluate All Items. The costing log is then generated with the error messages.
Procedure for System Administration
This message has the number DPR_FIN_GECCO026.

Hi,
Check the configuration.
Create and Change Controlling Scenario
Define Controlling Scenario
Settings for Easy Cost Planning
Assign Cost Elements and Activity Types
Regards
Ravindra

Similar Messages

IW172 : Error occured during Budget Check see Cost Protocol

Hello Guru's
While creating Capital Reservation in the Network i am getting the error " IW172 : Error occured during Budget Check see Cost Protocol" In making reservation we don't book any cost in the reservation.The Resv is charged by making SR.The amount is still available against the WBS Element.Please suggest what needs to be done.
From
Aashutosh

Check whether the following note helps you:-
Note 551677 - Process order: Availability control against WBS element
G. Lakshmipathi

The error occurs by correspondence check (WinVerify Trust) of the signature when Windows Installer with the digital signature is executed.

The following errors occur by correspondence check (WinVerify Trust) of the signature when Windows Installer with the digital signature is executed.
"Error 1330. A file that is required cannot be installed because the cabinet file C:\<tool>\Data1.cab has an invalid digital signature. This may indicate that the cabinet file is corrupt. Error 8230 was returned by WinVerifyTrust."
Please teach the following of Error 8230.
1) Occurrence condition.
2)Approach to avoiding.

So I found my own answer to the issue. The error was being caused by an the following xml in the assertion:
<ds:Reference URI="">
The value of URI attribute must have a '#' followed by the same value of the ID attribute in the parent 'Assertion' element (in our case a random string):
<saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" ID="a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe" IssueInstant="2012-03-12T14:33:25.986Z" Version="2.0">
<saml:Issuer>ISSUER_NAME</saml:Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
*<ds:Reference URI="#a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe">*
How this is related to the digital signature is beyond me, though I admit I'm very new to saml and digital signing. However I spent a great deal of time investigating my certs and how I was creating the signature, which it seems is unrelated to the actual issue. I also wasn't able to find any docs specifying that this attribute was required, though I might have just missed it.

Error occured in accounting message - Controlling cockpit

Hi All,
I have an item / Cproject and a project in PS linked to it. After the role requirement is done, system gives following messages in the PPM system.
Error occurred in accounting - check the costing in the ERP system Display Help
Maintain an activity type for cost/revenue rate R1
Maintain an activity type for cost/revenue rate ZB_ENG_S_TCAS
For last 2 messages I know that the activity type assignment to cost/revenue rate is needed. But for first message when I go to correct the entry in controlling cockpit it gives a message - Enter a valid value for the settlement type.
The settlement rule was created for PS project with settlement type FUL. Still this message is not getting cleared from the RPM system and from the controlling cockpit even after precessing it.
Can any one please let me know what can be done to solve this?
Regards,
Gaurav

Hi Yemi,
Controlling cockpit is accessed to view the error details in the accounting integration. This can be accessed through two ways.
1) In Project-->Accounting tab
2) Through tcode - COCPCPR
You can try the second method to view the error details.
And coming back to your query on project profile config in PS, as Pramod said, by standard SAP delivers a standard profile in SAP PS for cProjects-->PS integration. You can find the same in the below SPRO path.
Project System-->Structures-->Operative structure-->Work Breakdown structure(WBS)-->Create Project profile
Project profile name : CPR0001
This project profile is used when an automatic PS project is created through accounting integration.
Hope this helps.
Regards,
Ravi

Error occurred during budget check

Good Morning PS Gurus<
We are unable to increase the quantity of the matearil
in project & save. It’s throwing error
Error occurred during budget check, see cost protocal
Message Number :IW172
Diagnosis:
An error occurred during budget availabilty check
Procudure:
Display the cost determination log for the order or network plan for more detailed information.
We do’t have budget in our project. I checked budget TL ( it said warning message:1)
Please throw light on this issue.
Thanks
PY

Hello Team,
When i select the network-activityà extrasà logsà cost calculation.
It said WBS <<PRO1234> do't exist CJ021
Please help.
Thanks
PY

Error occured during budget check while planning in network activity

Dear All,
i have created a project with 4 WBSE. i have assigned budget to one of these WBSE and released that project. than i want to do planning in next WBSE this is giving error while saving this planning as Error occured during budget check, see cost.
i have created user status for budgeting like if we have not budgeted than WBS is not able to release. i have added availability control as Forbidden while not budgeted but this not effective.
please suggest me some thing to remove this problem
thanks
Sunil

hi,
In WBS you can Plan and budget to group WBS , the below wbs will consume budget form top.
Proj>WBS1(Group WBS- Plan/Budget) it is applicable for below all wbs elements say WBS2>WBS3
When you are determining Hierarchy you should create WBS in same levels then only you can allocate Budget.
If you wan to allocate budget for WBS2 and WBS3 separately.
Proj
WBS1
WBS2                    WBS3
     WBS2A                   WBS3A
          WBS2B                    WBS3B
               WBS2C                         WBS3C
Proj>WBS1 (it will no more act as Group wbs element) then you can directly plan and budget for below wbs elements WBS2 and WBS3.
Below hierarchy will consume budget from as displayed above.
Note: In you case as per my understanding return budget make zero, then plan and budget the same it will work.
Thanks and regards
Sadiq

Activity terminated because errors occurred during package checks

Hi Experts,
i am working on File to Proxy scenario.while i am trying to activate genarated proxy objects i am getting below eror.
Activity terminated because errors occurred during package checks .
anybody pls resolve the issue.
regards,
bhuvan.

Hi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana

TS3297 Error message: 'Cant connect to the itunes store. An unknown error occured (-3212) please check you have an active internet connection and try again'. Help !

Can someone help me please ? I was using itunes (downloading albums etc) just half an hour ago. I had a pop up asking me if i'd like to download the latest version of itunes, which i accepted. When the update had finshed downloading, i then restarted my computer, as i usually would. Tried to re access the itunes store, and received the following error message: 'Cant connect to the itunes store. An unknown error occurred (-3212) please check you have an active internet connection and try again.
Needless to say, i have an active internet connection and cant see any reason why this would be happening, it has never happened before ?
Any help would be appreciated.

Do you have PeerBlock installed/ > TS3297 Error message: 'Cant connect to the itunes store.

HT5570 I got an error message when I tried to download a song and it didn't download but my account balance was lowered by the cost of the song. What gives?

I got an error message when I tried to download a song and it didn't download but my account balance was lowered by the cost of the song. What gives?

Apple has announced they are currently experiencing issues with iTunes store purchases... give it some time to clear up.

An error occurred in Accounting

Hi All,
We've performed the accounting integration for cProjects 4.0 with R/3 4.6C and it is working well.
However, on opening a project, we face the following warning:
An error occurred in Accounting (system G46590).
But on executing COCPCPR, I do not see any error or warning message.
Any suggestions on why this message?
Regards,
Vivek Pandey

Hi Vivek,
May be this is for earlier project created using some wrong config...
I suggest you to create a new project and check back..
May be you can use controlling cockpit to see all earlier projects and find out which project is giving you error..
Niranjan
Let mw know if it helps !!!

Error in Remote Web Access - "An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server."

I have set up the RWA and I can log in to the web console with my server account. However when I click on any of the shared folders I get this error:
An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server.
Does anyone know how to troubleshoot this?
Regards,
Maciek

I had this very same issue with one of our customer's servers that was running Windows Server Essentials. I ended up calling Microsoft about the issue. I hope this helps someone. This originally appeared on my blog: http://techspeeder.com/2014/01/14/remote-web-access-error-an-unexpected-error-occurred/
Troubleshooting Steps:
1. We were getting unexpected errors while accessing shared folders remotely
2. The tech found IIS handlers were missing
3. She went to IIS > server level ( parent level) and added managed handler mapping :
Name: svc-Integrated-4.0
Request path: *.svc
Executable: System.ServiceModel.Activation.ServiceHttpHandlerFactory, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
4. Added script mapping:
Name: svc-ISAPI-4.0_64bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll
Name: svc-ISAPI-4.0_32bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework32\v4.0.30319\aspnet_isapi.dll
5. Ran IISreset.
6. We were able to access resources in Remote access, then.

Proxy Activity terminated because errors occurred during package checks

Hi,
When i am activating the client proxy class in ECC system after assigning it to the package,i am getting the below error.With local object($TMP) its working fine. I tried creating package using se80 as well as from sm30 using view V_TDEVC also and the package is created with no restrictions also .Kindly suggest what needs to be done to fix the issue.
Activity terminated because errors occurred during package checks
Message no. EU839
Diagnosis
Dictionary objects can only be activated if the package check is swithch ed on - provided they do not contain any package check errors.
You will receive a list of the package check errors if you execute the package check within the appropriate dictionary tool. To do this, use the respective menu entry in the first menu of theen; corresponding dictionary tool.
Procedure
Keep note of the setting for the package check (system-wide property) in your SAP System; this setting defines in which form the package concept is to be applied.
In particular, check whether the package in which the incorrect dictionary object is located has sufficient usage applications. Then, if necessary, create the missing usage applications.
As soon as the package check errors have been removed, you must again activate the dictionary object.
Thnx,
Goutham

Hi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana

Message no. DPR_FIN_GECCO024 Error occurred in accounting - see link controlling cockpit (cProjects)

Hi, everyone
I'm integrating PS( which is on IDES system ECC6 PH6) with cProjects( which is on DEV system ECC6 PH6 PPM 5.0). I've done customizing in DEV and IDES. The Controlling Method is Multilevel Controlling (Structure Element, Automatic).
When I'm saving a project with status 'to be transferd', the warning message appeared and I'm failing to assign PS Project automaticlly. But manual assignment works fine.
Error occurred in accounting - see link controlling cockpit (cProjects)
Message no. DPR_FIN_GECCO024
Diagnosis
Errors occurred when transferring to accounting.
System Response
DPR_FIN_GECCO 024
Procedure
Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. In the cockpit, you can create a variant with your Project Management project under Selection Variant Orders Project Management. The errors that occurred are then displayed. If no messages are displayed in the controlling cockpit, they have already been processed or deleted. If this is the case, trigger the transfer again.
No more messages are displayed once the transfer has been carried out successfully (that is, no errors occurred).
Here is the problem：
In this Message, I was told to Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. But actually, I can not find the Controlling Cockpit (Project Management) link on the Accounting tab page. It was missing.
I don't konw what‘s the problem with the missing Controlling Cockpit and how to deal with this warning message getting automatic PS assignment done.
By the way, I've done IDES test, cProjects and ERP system were integrated on the same system with RFC destination NONE. And that works fine on IDES, so I guess I've done the right customizing in the ERP system( IDES).
Best Regards，Yemi

Hi Yemi,
Controlling cockpit is accessed to view the error details in the accounting integration. This can be accessed through two ways.
1) In Project-->Accounting tab
2) Through tcode - COCPCPR
You can try the second method to view the error details.
And coming back to your query on project profile config in PS, as Pramod said, by standard SAP delivers a standard profile in SAP PS for cProjects-->PS integration. You can find the same in the below SPRO path.
Project System-->Structures-->Operative structure-->Work Breakdown structure(WBS)-->Create Project profile
Project profile name : CPR0001
This project profile is used when an automatic PS project is created through accounting integration.
Hope this helps.
Regards,
Ravi

An unexpected error occured. PDFMaker was unable to produce the adobe PDF

"An unexpected error occured. PDFMaker was unable to produce the adobe PDF." When trying to print PDF from Publisher (MS Office 2010) version 14.0.6129.5000 32bit. I am able to print to PDF Printer. I am using Adobe Acrobat 10.1.5.
Windows 7 64bit.

All I know to suggest off hand is to update to the latest Acrobat (10.1.7). You might also check your job settings and check to see if a log file was created that might give you some idea of what failed.

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing!

Error occurred in accounting - check the costing in the ERP system

Similar Messages

Maybe you are looking for