Error occurred in derivation rule
Dear All,
After saving the billing document, & it is not realesed to A/c. Document.My client came across the following error;
Error occurred in derivation rule. See long text
Message no. K/111
CO-PA Characteristic Derivation
Diagnosis
Step 0031 Category --> Item Category Dummy
No entry in a derivation rule was found for the specified source fields.
The derivation rule was set up so that an error message appears when this happens.
The required derivation rule entry would need the following source fields:
Customer
31970063
Procedure
Create an entry in a derivation rule for these source field values. Make sure that entries exist for all the valid source field values. If the derivation should not always be carried out, you can also define a derivation rule so that no error message appears if a derivation rule entry does not exist.
Maintain entries
Maintain derivation strategy
Waiting for the response.
Thanks & Regards,
SPT
Hi,
Check value fields assigned to each condition types and take a help of FICO consultant.
Use this link to understand what configuration steps need to be taken accross.
http://help.sap.com/saphelp_46c/helpdata/en/7a/4c38e14a0111d1894c0000e829fbbd/content.htm
Thanks,
Swamy H P
Similar Messages
-
"Error occurred in derivation rule" & "No commitment item entered in item".
Unable to create Purchase Request (PR) and the following error message shows
"Error occurred in derivation rule. See Long Text"
Diagnosis
Fund From Commitment Item
No entry in a derivation rule was found for the specified source fields.
The derivation rule was set up that an error message appears when this happens.
The required derivation rule entry would need the following source fields:
Commitment Item
xxxxxxx
Procedure:
Create an entry in a derivation rule for these source field values. Make sure that entries exist for all the valid source field values. If the derivation should not always be carried out, you can also define rule so that no error message appears if a derivation rule entry does not exist.
Can any one help how to find out the root cause of the error and solve this issue
Regards,
GBI was able to duplicate your error by creating the following.
I went to transaction FMDERIVE and created a derivation rule and named it "Fund From Commitment Item".
On the definition tab, I selected committment item (COMMIT_ITEM) for the source field and the target field selected (FUND).
The condition tab was left blank. NOTE: On the attribute tab I selected the option "Issue Error Warning If No Value Found).
I entered no rule values (F9) within the rule (for example such as commitment item XXXXXXX = fund YYYYY) and saved.
After creating this derivation rule, I get the same error message because there were no values in the derivation rule (the source commitment item used was not found in the rule).
If Fund is a field that is always keyed manually then I would not have such a derivation rule.
But you may have some exceptions (like we do) and in the case of exceptions you can populate the derivation rule with those exceptions... i.e. whenever commitment item XXXX is used then the fund should be equal to YYYY further using your conditions and attributes for your custom needs. -
Error occurred in derivation rule. See long text ; Message no. K/110
I am facing the below error when posting document in FI
Error occurred in derivation rule. See long text
Message no. K/110
CO-PA Characteristic Derivation
Diagnosis
Step 0166 5400: Profit Center in Inventory Posting
No derivation rule entry was found for the specified source values valid
on 02.04.2014.
The derivation rule was defined so that an error message is displayed
when this occurs.
The system could not find a rule entry valid on 02.04.2014 for the
following source fields:
Product Group
Procedure
Create a rule entry for these source values and make sure that rule
entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you
can also change the derivation rule so that no error message is
displayed if a rule entry is missing.
Maintain entries
Maintain derivation strategy
In KEDE:
In KEDR:
Please help me what might be the reason.Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
Error occurred in derivation rule in SAP
Hi All
i am trying to post the document as well to create the new PR i am getting the below error messge as
'Error occurred in derivation rule. See long text
Message no. K/101
Diagnosis
: Fund From Commitment Item
No entry in a derivation rule was found for the specified source fields.
The derivation rule was set up so that an error message appears when this happens.
The required derivation rule entry would need the following source fields:
Commitment Item
350801
Procedure
Create an entry in a derivation rule for these source field values. Make sure that entries exist for all the valid source field values. If the derivation should not always be carried out, you can also define a derivation rule so that no error message appears if a derivation rule entry does not exist.Hi Krishguna,
You need to check your derivation rule, T. Code: FMDERIVE for Fund then activate the trace, this will help you why fund is not deriving from commitment item, or tell us the detail of derivation for fund you have set.
Thanks
Javed -
Error occurred in derivation rule. See long text, Message no. ABADR100,
Hi
I am making some testing and I have the following message , which is about the functional area. I did not use the FM derive:
Error occurred in derivation rule. See long text
Message no. ABADR100
Diagnosis
SAP - Original Generic 4.7 Ver: Funded Program fro
No derivation rule entry was found for the specified source values valid on 22.06.2011.
The derivation rule was defined so that an error message is displayed when this occurs.
The system could not find a rule entry valid on 22.06.2011 for the following source fields:
Financial Management Area/Functional Area
Z001/6000
Procedure
Create a rule entry for these source values and make sure that rule entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you can also change the derivation rule so that no error message is displayed if a rule entry is missing.
please helpHi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
Error while defining derivation rules in FMDERIVE
We are currently on ECC6. While defining Funds Mgmt .... activated the derivation rules in FMRULES. But when I try to define the derivation rules in FMDERIVE .. I get the following error: Syntax error in program "RFMDERIVE003 ".
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RFMDERIVE003 " in include
"RFMDERIVE003 " in
line 32:
"The Dictionary structure or table "FMDERIVE003" is either not active o"
"r does not exist."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
How can the same be rectified. Kindly help.
Thanx
ShivajiHi,
Check the OSS note Note 644974 - Syntax error in program RFMXPR47. Looks like table FMDERIVE is missing.
Regards,
Sanjay -
CRM Order: Error occurred during determination of profitability segment
Hello All,
I have created a Trade promotion in CRM, and maintained the determination condition and Discount condition for the combination of
Customer /Sales org /Product.
I have maintained settings for CO-PA in connected SAP ECC
When i create a sales order in CRM , trade promotion is determined in the order and also discount is considered in the order pricing.
When i save the order in CRM, an entry in the outbound queue of CRM is created with destination pointing to ECC, which is having the status: SYSFAIL.
The description of the error is :" Error occurred during determination of profitability segment "
Suppose when if i remove the trade promotion which was determined in the order and then save the order i dont get this error.
Hence could you please help me providing additional settings which should be done if we want to have TPM also.
Regards,
NaveenLong Text message
An error has occured in the system ECPCLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
Error occurred during determination of profitability segment (Notification E IAOM 025)
Error occurred in derivation rule. See long text (Notification E K/ 111)
I pressed F8 to see the derivation strategy , but how do i figure out which characteristic/char value is missing / has the error.
Best Regards
Meghna -
Derivation Rule Problem - Sales Order -CHALLENGE TO ALL SD CONSULTANTS
Hi Friends
I am stuck on i very critical issue, i am not able to solve it, I am SD consultant, i wrote this issue on FI forum also, but i did not get complete solution, they write me back it is SD issue.
When i create a new sales order and click enter, a small screen open and message displayed on it "Error occurred in Derivation Rule, See long text"
And when try to save sales order in display incompletion log. When i press on edit to complete it message display " Item 10 ... Missing data- Profitability Segment No.
When i press on complete data - Account Assignment screen open (Business Area 9900)
Would you please send me solution with complete path to fix this problem
If you can give your email address, i will send you screen shot of the problem.
I have tried KEDR transaction issue also but nothing happened.
This is BIG challenge to all SD consultants now. Send me step by step solution
If you send my your email id, i will send actual error saved in word format.
Thanks
Rajesh
Email: [email protected]Good luck!
to get a solution you need to provide the members of this forum with details regarding your PA set-up.
PA is normally very customer driven, so not standard.
Without information regarding your structure there you will not get any solution.
GL
Hein -
Derivation Rule Problem - Sales Order
Hi Friends
I am SD consultant, i wrote this issue on SD forum also, but it is related to FICO.
Please send me solution with complete path.
When i create a new sals order and click enter, a small screen open and message displayed on it "Error occured in Derivation Rule, Seee long text"
And when try to save sales order in display incompletion log. When i press on edit to complete it message diaplay " Item 10 ... Missing data- Profitability Segment No.
When i press on complete data - Account Assignment screen open (Business Area 9900)
Would you please send me solution to fix this problem
If you can give your email address, i will send you screen shot of the problem.
Thanks
Rajesh
Email: [email protected]Hi Waman
I ckeck the transaction code /nKEDR there which entry i should select and in type of prfatibity Which one i should select Costing based or Accounting based.
I tried on selecting IDEA and Accounting based and eleased but still i getting same error.
My problem is still pending, please send next step to solve this issue
Thanks
Raj
Email: [email protected] -
COPA Derivation rule Error Message no. KE0C133
Hi
We have Fiscal Year 2010(April To March) and we are maintaining the derivation rule for the cost center in KEDR
Ane we are facing following error (Cost center validity is maintained from 01.04.2010 To 31.12.9999)
If we maintain validity period in from 01.04.2009 To 31.12.9999, then system is allowing to maintain derivation rule.
What you suggest in this Case ?
Derivation error :
Characteristic value DIC APOPS01DMU does not exist for characteristic COPA_KOSTL (Cost center)
Message no. KE0C133
Diagnosis
The characteristic "COPA_KOSTL" ("Cost center") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" DIC APOPS01DMU") is not valid in CO-PA.
System Response
The data is not consistent and therefore cannot be transferred to CO-PA.
Procedure
With the function Maintain Characteristic Values, you can add characteristic values to those that are valid.
Thanks
NileshHi,
I understand you are checking derivation rule by transaction KEDR.
When you check Derivation, you can input "Derivation Date" in the bottom of Characteristic Popup screen. Please consider what the system check the validity period for e.g. cost center with using "Derivation Date".
Additionally, for CO-PA planning, please consider that CO version also have "Derivation date".
Hope tis helps. -
Error ocurred in the derivation rule
Hi Guys
I am trying to create a sales order. But having this error
(error ocurred in the derivation rule) Msg no. K/111
How do I fix this please.
ThanksHi
The error desciption means that the issue is in the derivation rules for the source fields.
No entry in a derivation rule was found for the specified source fields.
The derivation rule was set up so that an error message appears when this happens.The required derivation rule entry would need the missing source fields.
Please click on the error message which should give you the missing source fields list. Maintain configuration in tcode KEDE and KEDR for the these fields and save,
Let me know if there are any issues. Hope this helps.
Karthik -
Error in derivation rule when posting vendor's invoice against int. order
Hi all,
I am trying to post an invoice using FB60 against an internal order. I get the message 'Errror in derivation rule' (ABADR01). The long message states 'No entry in a derivation rule was found for the specified source fields.'.
Why do I see this message, and what can I do to correct the situation?
Any help is appreciated..
PaulHi,
It's a message from CO-PA. It means that the system could not derive the characteristics from the source field of the original document. You have to check the integrity of your rules in KEDR transaction.
Regards,
Eli -
Cost model derivation rules error
Hey PS upgraders,
We are upgrading 4.6c to 6.0. When I m uploading the cost model from 4.6c to 6.0 thru CKCM , derivation rules are missing in 6.0.
Does any one come across this kind of issue in 6.0.
Thanks,
Krishna Reddy
Edited by: krishna.gujju on Jun 17, 2010 11:59 PMHi guys,
any idea! -
Error during automatic settlement rule creation
Hi Gurus,
For the investment project, I maintained as follows, first level WBSE - Only planning element - no settlement. 2nd level WBSE - settled to AuCs. For level three & below settled to Superior WBSE. I had created the Settlement type with '5'. When I am executing CJB2 to create the Settlement rules automatically, I am getting the following error message for level 3 & below WBSE.
Enter a valid value for the settlement type :
Message no. KD199
Diagnosis
The system found a settlement type settlement type in the settlement rule which either does not exist or is unsuitable for the sender.
Procedure
If possible, enter a suitable settlement rule. Remember that the rules for preliminary settlement ("PRE") of capital investment measures are different from those for period settlement ("PER") of other settlement senders. Periodic settlement only makes sense for capital investment measures. They must not have any "PER" rules.
To enter an investment profile (in the control data for an order or WBS element) or to remove it. However, first delete the PER or PRE rules (in the settlement rule) and er zu in internal orders, you can first change the investment profile and then adapt the rules before you save.
Error(s) during creation of settlement rule :
Message no. ORB509
Diagnosis
Errors occurred during the check on settlement receivers.
System Response
Processing stopped.
Procedure
Check whether the:
Specific receiver Account assignment e actually exists
Settlement profile Z7 permits account assignment to the specified receiver
can anyone help me where I am making mistake or what is the procedure to be adopted for such scenario.
somebody else also had discussed the same issue in this forum but there is no answer for this.
thanks in advance
Vinodhhi Sreenivas,
Thanks for your reply,
I tried this, system is giving the following error now
Could not find a superior WBS element for WBS element
Message no. CJ115
Diagnosis
The system could not find a superior element for a WBS element while it was executing the function 'Derive structure'
System Response
Processing stopped.
What could be the reason ?
thanks in advance,
Vinodh -
Derivation rule to maintain while posting physical inventory diff
Hi SAP GURUS,
Could you please me its very urgent!
My user are doing the monthly physical inventory,but for some components,when they are tring to post the physical inventory diff ,its giving an error " ERROR OCCUR IN THE DERIVATION RULE" .
Please suggest me where i need to maintain this derivation rule for the fsource field.Thanks in advance.
Regards
ReddyCheck with the Movement type useing for that posting the Physical diff and also check the document for the same.
Maybe you are looking for
-
How to trace an ApEx page processes(anonymous PL/SQL) submited by any user?
Dear Friends; can I trace an ApEx page processes (anonymous PL/SQL code step by step) submitted by any user? could you explain in detail, please? regards Siya Edited by: sak on Feb 3, 2012 1:07 AM
-
I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the erro
-
Bug in scrollbar event triggering?
In LabVIEW 8.6, I am trying to fire an event when I finish moving the scrollbar of an array indicator. I use the "mouse up" event to avoid having the event structure fire constantly the entire time I am moving the scrollbar. However, there seems to
-
Hello, Is it possible to restrict tcode SM13 to provide display only access ? If so, how can this be achieved? Thank you for your response.
-
Hi, this morning all of our remaining XP machines are unresponsive for up to 30 minutes after startup until MsMPEng crashes[1]. It looks like an update either last nicht or this morning introducted this problem. The affected machines run FEP 2012 4.3