Error occurred in UPDATE_INFOCUBE

Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Routine r0012_0IR_VAL_RET, return code = 4 without error message. See Note 1530791
i have check the routine in update rule, there is no syntax error on all update rule, all infoobject, infocube and transfer rule is activcated. I have also reactivated 0REQUEST infoobject and try again, but still same error, please advice.
We are on SAP_BW 702 SAPKW70209
Edited by: Ming Jun Lai on Feb 28, 2012 5:17 AM

similar issue is discussed in this http://forums.sdn.sap.com/thread.jspa?threadID=2099901

Similar Messages

Error has occurred in UPDATE_INFOCUBE

Hi All,
Iam working on SRM (Bidding Engine) area, i have used the standard info Cubes and DSO only.
Data Flow is Info Cube 0SR_BIDC1 is getting updated through three DSO: 0BBP_BID, 0BBP_QUO, 0SR_BIDO1.
Out of which when iam updating the data from these three DSO, data is getting updated sucessfully through two ODS with out any error but with one DSO i.e., 0BBP_BID it is giving me the error Error has occurred in UPDATE_INFOCUBE.
when i check in the step by step analysis it is giving me this message:
*Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
    The error message(s) was (were) sent by: Update rules*
can anybody suggest me the approach how i can proceed further.
Regards
Prabhakar

Hi Kishore,
Yes, there is a start routine in the update rules. i have checked the code, but in that routine only one field is refered for the updation Processing Status of the BID (0BBP_PROBID)
Code is as follow's:
LOOP AT DATA_PACKAGE.
    IF DATA_PACKAGE-bbp_probid = 'I1009'.
bid invitation is held*
      DELETE DATA_PACKAGE.
    ENDIF.
ENDLOOP.*
Please check this one, an early reply is appreciated.
Regards
Prabhakar

Has occurred in UPDATE_INFOCUBE

Please help this Error.
Wrror has occurred in UPDATE_INFOCUBE" and the fix!
Rgds,
Mohan

hi
error in Update_infocube,Rsau499
brconnect update stats on an infocube
can you give clear information

I set up family sharing wrong, so i left family sharing and joined the right way agin but an error occurred and now it tells me I'll have to wait 364 days to rejoin again! How can I reset my account so I can use it again?

WWhen I set up family sharing i did it with me as family organizer, but as my spouse is the organizer I had to leave the "family" I created and join his. But while setting it up an error occurred, and the screen went blank. Now I tried to join his family sharing again, and my phone keeps telling me I can't because accounts can only join families twice a year.
I Don't really want to wait 364 days from now, is there a way in which I can reset my accoint so I can join family sharing again?
Apple support doesn't have a solution for me yet!
KInd regards

This morning I looked at my family sharing account again an IT WORKS NOW! Think Apple has done a reset to my account, though I'm not exactly sure why! So I hope it works for you guys as well!

Internal error occurs in background job scheduling

Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
Viven

What is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell?

Error occurs while activating a 'Write Optimized' DSO.

I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSO

Hi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth

A generic error occurred in GDI+ while assing tiff image file to Bitmap and Image

Hi,
I am getting "A generic error occurred in GDI+" error while reading the tiff image file to Bitmap or Image.
Below is my sample code.
string filePath=@"c:\Images\sample.tif";
Bitmap bmp=new Bitmap(filePath); // here getting exception
int totalpages=bmp.GetFrameCount(.....);
etc......
I tried using Bitmap.FromFile() and also from FromStream() even for Image also but there is no use.
Moreover i m having full permissions for the file path and the tiff file is having multiple pages.
Can anyone help me to solve this issue please.
Thanks & Regards,
Kishore
Kishore

Make sure that the Tif file is valid (can other software open it)? If you are able to save a Tif using GDI+, try saving that Tif, then opening it. Part of me wonders if there is something about that specific Tif that GDI+ doesn't like.
You could also try using WIC to open the TIF, perhaps you would have better luck there.

Error Occured while Invoking a BPEL Process from JAVA

Hi.....
When initiating a BPEL process from JAVA the code is working fine and the Process is getting initiated.But while using that code in J2EE project as a java code and while calling that method Error is occuring.....
Here by i am attaching my JAVA Code which runs as an applicateion and package which runs in Server....
JSP and Java Method Used:
JSP Code:
===============
<%@ page import=" bo.callbpel" %>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>FEATT - I30</title>
</head>
<body>
<%
String input=request.getParameter("dnvalue");
callbpel p=new callbpel();
String Output=p.Initiate(input);
out.print("The Input Given to the BPEL Process is : "+input);
%>
 
<%
out.print("The Reply from BPEL Process is : "+Output);
%>
</body>
</html>
Java Code:
package bo;
import com.oracle.bpel.client.Locator;
import com.oracle.bpel.client.NormalizedMessage;
import com.oracle.bpel.client.delivery.IDeliveryService;
import java.util.Map;
import java.util.Properties;
import oracle.xml.parser.v2.XMLElement;
/*import javax.servlet.RequestDispatcher;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest ;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession; */
//import java.util.*;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
public class callbpel {
 public String Initiate(String value){
 String replyText=null;
 String input = value;
 System.out.println(input);
 String xmlInput= "<ns1:AccessDBBPELProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/AccessDBBPEL\"><ns1:input>"+input+"</ns1:input></ns1:AccessDBBPELProcessRequest>";
 String xml="<ns1:BPELProcess1ProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/BPELProcess1\">";
 xml=xml+"<ns1:input>"+input+"</ns1:input>";
 xml=xml+"</ns1:BPELProcess1ProcessRequest>";
 try{
 Properties props=new Properties();
 props.setProperty("orabpel.platform","ias_10g");
 props.setProperty("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory");
 props.setProperty("java.naming.provider.url","opmn:ormi://157.227.132.226:6003:home/orabpel");
 props.setProperty("java.naming.security.principal","oc4jadmin");
 props.setProperty("java.naming.security.credentials","oc4jadmin");
 props.setProperty("dedicated.rmicontext", "true");
 Locator locator = new Locator("default", "bpel", props);
 String uniqueBpelId = com.collaxa.cube.util.GUIDGenerator.generateGUID();
 //System.out.println(uniqueBpelId);
 //java.util.Map msgProps = new HashMap();
 System.out.println("After creating the locator object......");
 IDeliveryService deliveryService =(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME);
 System.out.println("Before creating the NormalizedMessage object......");
 NormalizedMessage nm = new NormalizedMessage();
 System.out.println("After creating the NormalizedMessage object.*.*.*...");
 //msgProps.put("conversationId",uniqueBpelId);
 //nm.setProperty("conversationId",uniqueBpelId);
 nm.addPart("payload", xml);
 System.out.println("Before creating response object......");
 NormalizedMessage res = deliveryService.request("BPELProcess1", "process", nm);
 System.out.println("After calling the BPELProcess1 .*.*.*...");
 Map payload = res.getPayload();
 System.out.println("BPEL called");
 XMLElement xmlEl=(oracle.xml.parser.v2.XMLElement)payload.get("payload");
 replyText=xmlEl.getText();
 System.out.println("Reply from BPEL Process>>>>>>>>>>>>> "+replyText);
 catch (Exception e) {
 System.out.println("Exception : "+e);
 e.printStackTrace();
 return replyText;
While Creating and Object for the Class callbpel and Whilw Calling that Method
callbpel p=new callbpel();
String Output=p.Initiate(input);
Its throwing an Error:
Error Occured is:
After creating the locator object......
Before creating the NormalizedMessage object......
After creating the NormalizedMessage object.*.*.*...
Before creating response object......
Apr 24, 2008 9:12:00 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.NoClassDefFoundError: javax/ejb/EJBException
 at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:76)
 at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:254)
 at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:83)
 at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:53)
 at bo.callbpel.Initiate(callbpel.java:55)
 at org.apache.jsp.output_jsp._jspService(output_jsp.java:55)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:331)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:874)
 at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
 at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
 at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
 at java.lang.Thread.run(Unknown Source)
For Running JSP i am Using Eclipse 3.2.0 and apache-tomcat-5.5.25
Please Provide me a Solution......
Thanks in Advance.....
Regards,
Suresh K

Have got the same problem. Scenario at my end is little different though.
I am trying to invoke a BPEL process from an ESB Service.
I am trying to look into it..
However, would be grateful, if someone can give some insight into this since many are running into this issue without being able to fix.
Ashish.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Error occurred in deployment step 'Add Solution': A timeout has occurred while invoking commands in SharePoint host process.

Hi,
I am deplyoing a solution which has custom web parts- vwp- appln pages, event receivers.
It was working fine till last week. I was able to deploy the solution and able to see the web parts and func. was working.
But now from the last 2 days onwards, when I tried to depoy this soution, I am getting the error
"Error occurred in deployment step 'Add Solution': A timeout has occurred while invoking commands in SharePoint host process "
may i know why am getting this error.
note: my dev machine- Win Srvr 2012 - VS 2012- SP 2013 - SP D 2013 was having soem issues with the space in C drive.
once i have done the index reset few months back and i started getting space in C:\ Drive is 0 bytes.
so what my infra. team has done is , increased the space in drive to 150 GB[ it was a VM ].
help is appreciated !

What is current disk space on your drives
Delete ULS logs and other log files from server id not needed
could be related to ChannelOperationTimeout
http://msdn.microsoft.com/en-us/library/ee471440(v=vs.100).aspx
Also, don't forget to restart Visual Studio
Goto the following regustry key: HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools
Add the following as a DWORD (wont be there by default)
ChannelOperationTimeout
REG_DWORD that specifies the time, in seconds, that Visual Studio waits for a SharePoint command to execute. If the command does not execute in time, a SharePointConnectionException is thrown.
The default is 120 seconds.
http://social.technet.microsoft.com/wiki/contents/articles/21052.como-resolver-o-erro-error-occurred-in-deployment-step-activate-features-a-timeout-has-occurred-while-invoking-commands-in-sharepoint-host-process-pt-br.aspx
If this helped you resolve your issue, please mark it Answered

Error occurred in deployment step 'Activate Features': A timeout has occurred while invoking commands in SharePoint host process.

Error 1 Error occurred in deployment step 'Activate Features': A timeout has occurred while invoking commands in SharePoint host process.
0 0 myProjectAssetsLists
am getting the above error when i deploy my farm solution which is actually a "farm solution import package" template.
i am deploying this to a new site collection and once its features are activated this will provision few doc libs and splists in the targeted site.
any help is appreciated.

try below link:
http://msdn.microsoft.com/en-us/library/ee471440.aspx
http://sujeetrec.blogspot.in/2013/12/sharepoint-2010-deployment-timing-out.html
Increase the timeout that Visual Studio waits for SharePoint to deploy a feature:
Create: [HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools] ChannelOperationTimeout DWORD
The value is a timeout in seconds. The default is 120 (2 minutes).
Full details on this switch and others are here:
http://msdn.microsoft.com/en-us/library/ee471440.aspx

Error Occured while processing a Request-openning a another coldfusion page from old page link

in one page there is dynamic link in that i want to open anather page...
code is compiled ok and page is at place where i refered a link but it gives error 'error occured while processing a request'
Error Diagnostic Information
An error has occurred.
HTTP/1.0 404 Object Not Found
this error shows please help me...
i am new in coldfusion.
Thanks.

Hi Salvatore,
This is a very wide error. You did not provided any other info as specified by Michael. Just a wild guess, this sort of error occurs generally when classpath or java_home properties are not set correctly. But, as i said it is very wide, some more info will be useful.
Regards
Chander Kararia

Rep-1401: formula name : Fatal Pl/SQL error occured

Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
Thanks

Thanks for ur reply.
I used nvl too, but the same error occurred.
For the information in my question I by mistake typed
t_val := (f_val + 1)/s_val; --> this gives the above fatal error.
but when the value of f_val = zero and s_val is zero why it gives fatal error when i divide, i used nvl on both the variable while dividing but still got the same error.
but if s_val is greater than zero then no error occurs.
please help me, I feel it is a bug.

Rep-1401 : Fatal PL/SQL error occured

Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
Thanks

The best way to handle this is to just add an exception handler that handles a zero divide.
EX:
function...blah
var3:=var/var2...
EXCEPTION
when zero_divide then
var3:= 0;Zero Divide is a built-in exception to handle cases just like this - so if you run into it, you can set it to whatever you want

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Error occurred in UPDATE_INFOCUBE

Similar Messages

Maybe you are looking for