Error occurred when view the data from physical layer

Hi ,
I have created system DSN like "demo1" for excel file. After that i import the excel file into administration tool.
after that i want to view the data from physical layer. At that time ,I am getting following error .
Please resolve this issue.
Thanks in advance,

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Similar Messages

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

Error occured while extracting the data from BSIK Table

Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,

Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Raw Read Error Rate, Errors occurred while reading raw data from a disk

hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
Mohammad

Hello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

[SOLVED] Error occur when viewing youtube videos firefox 14.0.1

'''''PROBLEM SOLVED!'''''
Error occur when viewing youtube videos firefox 14.0.1, any solution? tired of reading/finding exact solution.
This is annoying me.
Application Basics
Name
Firefox
Version
14.0.1
User Agent
Mozilla/5.0 (Windows NT 6.1; rv:14.0) Gecko/20100101 Firefox/14.0.1
Profile Folder
Show Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Crash Reports
about:crashes
Memory Use
about:memory
Extensions
Name
Version
Enabled
ID
RealPlayer Browser Record Plugin
15.0.4
false
{97E22097-9A2F-45b1-8DAF-36AD648C7EF4}
Important Modified Preferences
Name
Value
browser.cache.disk.capacity
1048576
browser.cache.disk.smart_size.first_run
false
browser.cache.disk.smart_size_cached_value
911360
browser.places.smartBookmarksVersion
4
browser.startup.homepage_override.buildID
20120713134347
browser.startup.homepage_override.mstone
14.0.1
extensions.lastAppVersion
14.0.1
network.cookie.prefsMigrated
true
places.history.expiration.transient_current_max_pages
46736
privacy.sanitize.migrateFx3Prefs
true
Graphics
Adapter Description
Intel(R) HD Graphics
Vendor ID
0x8086
Device ID
0x0046
Adapter RAM
Unknown
Adapter Drivers
igdumdx32 igd10umd32
Driver Version
8.15.10.2119
Driver Date
4-21-2010
Direct2D Enabled
Blocked for your graphics driver version. Try updating your graphics driver to version 8.15.10.2202 or newer.
DirectWrite Enabled
false (6.1.7600.16699)
ClearType Parameters
ClearType parameters not found
WebGL Renderer
Blocked for your graphics driver version. Try updating your graphics driver to version 8.15.10.2202 or newer.
GPU Accelerated Windows
0. Blocked for your graphics driver version. Try updating your graphics driver to version 8.15.10.2202 or newer.
JavaScript
Incremental GC
1
Library Versions
Expected minimum version
Version in use
NSPR
4.9
4.9
NSS
3.13.5.0 Basic ECC
3.13.5.0 Basic ECC
NSS Util
3.13.5.0
3.13.5.0
NSS SSL
3.13.5.0 Basic ECC
3.13.5.0 Basic ECC
NSS S/MIME
3.13.5.0 Basic ECC
3.13.5.0 Basic ECC

Do you have all pop-up blockers disabled?
FYI: Please lose all the formatting in your posts.Simply makes it very difficult to follow.

'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

One of the following steps should help.
Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Web Content: > "Enable Plug-ins".
       or
    Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box beside
   "You are currently in the HTML5 trial".
4. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes beside all items.
    Check the box beside "Remove all website data".
    Click "Reset".
5. Turn off Extensions, if any.
    Safari > Preferences > Extensions
     Now try YouTube.
Best.

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

Failed to execute with the error Error occurred when starting the parser: t

Dear All
I am getting this error
""A database error occurred. The database error text is: The MDX query SELECT { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
I already implemented note 1032461

Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu....

Error occurred when view the data from physical layer

Similar Messages

Maybe you are looking for