Error occurred while configuring vision acqusition.
Hi all,
I am trying to incorporate a camera in my VI. I have done this before using labview 8.5 and vision acquisition. Now I am trying from another machine which has labview 2011. I tried 2 USB camera with vision acquisition and both failed. It shows a red cross mark near the cameras and I am not able to rectify this, I read some threads and people suggested to check in the measurement and automation application. I checked there and the camera is not active there too. I am trying to make sure that the USB cameras use the IMAQ drivers but still i get this error. Am looking forward to a possible solution from this forum.
Attachments:
p1.jpg 47 KB
p2.jpg 74 KB
Hello Pram,
The red x symbol on the camera means that it has failed to correctly initialize. This can occur if the driver is not compatible, has not been installed, the hardware is defective, or some other communication errors are occuring.
Here is a link to KnowledgeBase with troubleshooting instructions for using a USB Camera with LabVIEW.
Troubleshooting USB (DirectShow) Camera Installation Problems:
http://digital.ni.com/public.nsf/allkb/c1bc2d93adc392bb8625768c0060afe7
Cheers,
Joel
Motion PSE
National Instruments
Similar Messages
-
Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard
am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest. I go to add roles and features and select essentials. The config wizard says it is Updating and Preparing the Server and
That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again. I don't seem to find anything in the log to indicate why it fails.Hi boe_d,
Based on your description, did you mean that this error was occurred in process of installing the Windows Server
Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
message.
In addition, please add
ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
Experience role
http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
can find any error that depend on the Essentials Experience Role setup time.
Hope this helps.
Best regards,
Justin Gu -
Hi there,
My Mac OS X Server 8.2 got buggered after I did the following steps:
Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
Clicking the Off button in the Profile Manager section of the Server.app
Clicking the On button of the same
Clicking on asks if I want to create a new directory master, but I know that one already exists. Trying to continue confirms this. So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
I've done this enough times while watching the system log to see the actual error thrown, which is:
Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
"Creating Open Directory master"
), NSLocalizedDescription=A child action failed}
I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
Here's a similar threads:
https://discussions.apple.com/message/19237429#19237429
Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups). It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
Clean up steps:
Delete the DNS zone (and all entries).
Turn off all server services
Delete all file server sharepoints
Change the host name at Hardware => SRV => Network tab. This runs the Change Host Name program.
Close Server.app
Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
Delete the /Library/Server directory
Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
Delete all the entries in the Login keychain
Reboot (probably don't have to)
Re-download and install Server.app
Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
After Server setup, confirm that the host name from step 4 is what I want.
Running "changeip -checkhostname" shows "Success". I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager. Then, go destroy the open directory that already exists. Then create the domain via the Profile Manager enabling process. At present, this only seems work to for a "private" domain. Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method.
Any advice or clues you can throw my way would be most appreciated.
Thanks,
KimHad the same problem found the answer here:
https://discussions.apple.com/thread/3264944?start=0&tstart=0 -
An unexpected error occurred while configuring the Network Bridge
Windows XP Pro SP2, a new TP61 6460 6WG, all Win updates, all Lenovo updates.
Everything works fine except... when I'm trying to create a network bridge I always get the following: An unexpected error occurred while configuring the Network Bridge.
This is not the situation described in Microsoft's Knowledge Base KB309640 (http://support.microsoft.com/kb/309640/en-us). I have no ICS, no ICF.
Any ideas?I had the same problem and was really frustrated. I was about to pull my hairs out but then i was finally able to solve it. The solution is deleting some files of WMI repository. The complete details can be found on my blog http://cheatppc.blogspot.com/2008/07/unexpected-error-has-occured-while.html
Hope this solves the problem. -
I need help with Mavericks Server: an error occurred while configuring your server. I
I need help with Mavricks Server, I get the following: an error occurred while configuring your server. I have deleted the Server.app several times along with the associated com.apple and Server folder. Any more help would be appreciated.
There are usually some log files around, related to the installation. See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.
-
An error occurred while configuring your server
The following actions failed or were not attempted:
Configuring network
Starting push notification server.
DNS is killing me. I am an accountant.
I have a new out of the box mac mini server.
I want clients (real people with pcs and macs) to have external internet access to wiki, email and other nice services.
I do not want to serve DNS to the world; I just want to get past the installation configuration with a suitable DNS.
I am not at all clear whether I want Open Directory and from that whether I need DNS at all.
When this machine is set up it will be accessed only from outside on the public internet, including for admin matters by me; no "internal/local" users at all.
I do have a choice of domain names. I was trying papakilo.net and server as the machine name.
I can go in to change the papakilo.net domain records - though whether I can set up a reverse dns I am not clear.
I will buy a time machine if that is what it takes to have the firewall security managed by the server itself; I am assuming this would remove a level of expertise I do not want to acquire more than already.
I have spent many hours on here and in google, reading, watching videos etc looking for the answer to what to enter into "Primary DNS name"?
Where I am working right now has a dynamic IP but it doesn't change often and is fine for testing because I can keep checking what it is.
The final location will have (does have) a fixed ip address.
I bought Max Server many years ago, perhaps version one or two or whatever and had the same experience: within minutes I was unable to use the system.
So. The adverts said this was now easy. (I never learn).
If I knew what to type in to the DNS boxes and what to change on papakilo's domain DNS would I be further along?
I was looking forward to the joys of VPN set up and the like, not this.
Somewhat disappointedly as I had high hopes only to find extensive DNS reading is required to know what to type into the very first dialogue box.
Wonder if I should set up the canonical server.papakilo.net in the internet based DNS record so that the install routine can find it... is that the first problem?
And is the second problem to point the external i.p address back to the dynamic one in use at this location?
And will that facilitate the reverse lookup?
And will I have to wait for the propagation time to find out if this works -
or can I use actual i.p. addresses while I wait?
Some sympathetic help would be much appreciated please, and I promise I won't tell everyone how simple tax is.
Best wishes,
AnthonySpecial thanks to JeroenHolland for this post
http://discussions.apple.com/thread.jspa?threadID=2357325&start=0&tstart=15
where he says this: (I have edited in my own data to replace previous content)
So:
< External DNS server of your ISP >
------------Time Capsule--------------
< Local DNS server running on your Mac Mini >
I think the above is truly brilliant for its clarity of presentation. It is simple, but attempt writing that description in words and see how the caveats make it look complex.
snip/snip/ I haven't done the time capsule stuff yet. Clearly I need DNS set up and here below is the clearest description I have found:
Then the next step is to setup the DNS Service in Server Admin.
First the Settings tab:
"Accept recursive queries" basically is a whitelist of which computers are allowed to use the DNS server. In a local DNS server, 'localnets' is okay. Localnets allows all IP adresses in the same range as the IP adress of the DNS server to access it.
Actually all that was already entered by default, so ok was all I needed click.
"Forwarder IP Adresses" are the IP addresses of the DNS servers that should be used if the requested URL-name (hostname/domainname/etc) is NOT in the list of the DNS server.
(So if the DNS server gets a request for "www.google.com", and the zone "google.com" isnt in its Zone list, the request gets forwarded to those Forwarder DNS servers.)
Again sheer simplicity or presentation in words I understand (and not Dutch this is where I understand that I can use my isp's DNS numbers from standard Network setup in system prefs, so this is the link between internal DNS and external DNS - I just could not see it before. "Forwarder" means "my isp's DNS numbers".
The last thing is the Zones.
I understand that you're setting up your own webserver. With subdomains.
Primary Zone Name should be: papakilo.net.
Nameserver Zone should be: papakilo.net.
Nameserver Hostname should be: news.papakilo.net
Machine:
* Machinename: new.papakilo.net.
* Ip Address: 192.168.1.103
CNAME Alias:
* Alias name: www
* Destination: news.papakilo.net.
Clearly I have populated the quotation with my own data to see if I can and for later reference.
So with my broken system I have no Open Directory so when I click Groups it says I have to set up Open Directory first and now with the above entered I do that and create some users.
The only thing remaining seems to me external access as I can access using local ip addresses.
Anthony
Message was edited by: Anthony Mellor -
Hi,
I'm trying to configure UC560 using CCA.After configuring all the parameters and when i press APPLY CONFIGURATION, the following dialog box appears.
Kindly suggest.Untick the "Use PKI Client Certificate when available" in the Site Properties. I would create a self-signed certificate for the DP. Don't forget to Update DP for all your boot images when you are finished.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Almost all of my service bus has the following issue. The error message I have from the Management Portal was "An error occurred while retrieving the Service Bus namespace configuration information. Please try again later." This happen for almost
2 days.
Anyone face the same issue? how to resolve this?Hi,
If you create a new one, did you receive the same issue? If that, I suggest you submit a ticket at:
http://www.windowsazure.com/en-us/support/contact/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error Occured while working with the configuration (scanning)
Hi
We are trying to open the configtool for our double stack NW04s system.
When we go to the mapped drive on our PC and then try to open the configtool from
usr/sap/<SID>/DV*/j2ee/configtool/configtool.bat,
it prompts if you wnat to use the default settings?
We confirm that and the it throws the screen,
Error Occured while working with the configuration (scanning)
Msg:Error while connecting to DB
The system log file in the configtool dir shows the following:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[.\system.log]/>
<!PATTERN[system.log]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
#1.5# #1196814000546#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5# #1196814001671#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#sqltrace.xml#SQLTraceLogger#
#1.5# #1196814001671#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#default.trc#com.sap.engine.core.configuration#
#1.5# #1196814001984#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store Y:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1196814001984#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store Y:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1196814001984#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store Y:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1196814001984#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store Y:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1196814001984#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store Y:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1196814002687#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1196814002687#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1196814005531#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1196814008750#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/trace#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1196814008765#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/trace#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1196814008796#/System/Database/sql/trace##com.sap.sql.trace.SQLTrace#######Thread[main,5,main]##0#0#Info#1#com.sap.sql.trace.SQLTrace#Java#com.sap.sql.trace_1602#com.sap.sql.log.OpenSQLResourceBundle#SQLTrace: Using implementation .#1#LOGGING#
#1.5# #1208285013687#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5# #1208285014343#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#sqltrace.xml#SQLTraceLogger#
#1.5# #1208285014359#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#default.trc#com.sap.engine.core.configuration#
#1.5# #1208285014734#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1208285014734#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1208285014750#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1208285014750#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1208285014765#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1208285015562#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1208285015562#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1208285025421#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1208285028484#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/trace#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1208285028500#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/trace#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1208285028593#/System/Database/sql/trace##com.sap.sql.trace.SQLTrace#######Thread[main,5,main]##0#0#Info#1#com.sap.sql.trace.SQLTrace#Java#com.sap.sql.trace_1602#com.sap.sql.log.OpenSQLResourceBundle#SQLTrace: Using implementation .#1#LOGGING#
#1.5# #1209352055340#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5# #1209352056511#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1209352056543#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1209352056574#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1209352056590#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1209352056605#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1209352095105#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209352095121#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209352137840#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1209352147558#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209352147636#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[main,5,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester cannot establish the connection. (sapdev)#jdbc:as400://sapdev/SAPBIDDB;transaction isolation=read uncommitted;data truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor hold=false;true autocommit=true#<null>#
#1.5# #1209352503465#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5# #1209352504152#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1209352504168#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1209352504168#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1209352504183#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1209352504199#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1209352529746#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209352529777#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209352562215#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1209352570090#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209352570136#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[main,5,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester cannot establish the connection. (sapdev)#jdbc:as400://sapdev/SAPBIDDB;transaction isolation=read uncommitted;data truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor hold=false;true autocommit=true#<null>#
#1.5# #1209352718777#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352718824#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352718855#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352718886#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352719261#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352719371#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352719418#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352719449#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352719527#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352719558#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352719605#/System/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Warning##Java#SAP_LOGGING_FORMATTER_ERROR##Attempting to change a formatter on active log ! The reset() method must be called first!#1#.
system.log#
#1.5# #1209352719636#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352720371#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1209352720418#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1209352720465#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1209352720511#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1209352720543#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1209352721152#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1209352727933#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209352727949#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[AWT-EventQueue-0,6,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester cannot establish the connection. (sapdev)#jdbc:as400://sapdev/SAPBIDDB;transaction isolation=read uncommitted;data truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor hold=false;true autocommit=true#<null>#
#1.5# #1209352728043#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352728058#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352728090#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352728105#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352728183#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352728230#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352728230#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352728230#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352728230#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352728230#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209352728246#/System/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Warning##Java#SAP_LOGGING_FORMATTER_ERROR##Attempting to change a formatter on active log ! The reset() method must be called first!#1#.
system.log#
#1.5# #1209352728246#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209352728261#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###Properties for connect through secure store not set. Please check your connect properties. Trying to connect via plain user/password.#
#1.5# #1209352728277#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209352728277#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[AWT-EventQueue-0,6,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0019#com.sap.sql.log.OpenSQLResourceBundle#Exception of type caught: .#2#com.sap.sql.log.OpenSQLException#Value "" is not allowed for parameter url.#
#1.5# #1209354285746#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5# #1209354286340#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1209354286355#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1209354286355#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1209354286371#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1209354286386#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1209354300496#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209354300511#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209354316699#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1209354326121#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209354326183#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[main,5,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester cannot establish the connection. (sapdev)#jdbc:as400://sapdev/SAPBIDDB;transaction isolation=read uncommitted;data truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor hold=false;true autocommit=true#<null>#
#1.5# #1209355441965#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5# #1209355442324#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1209355442324#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1209355442324#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1209355442324#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1209355442324#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1209355447043#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209355447058#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209355456355#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1209355463668#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209355463902#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[main,5,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester cannot establish the connection. (sapdev)#jdbc:as400://sapdev/SAPBIDDB;transaction isolation=read uncommitted;data truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor hold=false;true autocommit=true#<null>#
#1.5# #1209355555965#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355555965#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355555965#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355555965#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355555996#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355556011#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355556011#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355556027#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355556027#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355556027#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355556027#/System/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Warning##Java#SAP_LOGGING_FORMATTER_ERROR##Attempting to change a formatter on active log ! The reset() method must be called first!#1#.
system.log#
#1.5# #1209355556027#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355556058#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1209355556074#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1209355556074#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1209355556074#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1209355556074#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store E:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1209355556183#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1209355562949#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209355563074#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[AWT-EventQueue-0,6,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester cannot establish the connection. (sapdev)#jdbc:as400://sapdev/SAPBIDDB;transaction isolation=read uncommitted;data truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor hold=false;true autocommit=true#<null>#
#1.5# #1209355563105#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355563121#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355563136#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355563136#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355563215#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355563215#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355563215#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355563215#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355563215#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355563246#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209355563277#/System/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Warning##Java#SAP_LOGGING_FORMATTER_ERROR##Attempting to change a formatter on active log ! The reset() method must be called first!#1#.
system.log#
#1.5# #1209355563293#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209355563293#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###Properties for connect through secure store not set. Please check your connect properties. Trying to connect via plain user/password.#
#1.5# #1209355563308#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#com.sap.sql.log.OpenSQLResourceBundle#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209355563308#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[AWT-EventQueue-0,6,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0019#com.sap.sql.log.OpenSQLResourceBundle#Exception of type caught: .#2#com.sap.sql.log.OpenSQLException#Value "" is not allowed for parameter url.#
#1.5# #1209391763428#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5# #1209391765569#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_jsse.jar#
#1.5# #1209391765585#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
w3c_http.jar#
#1.5# #1209391765585#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_ssl.jar#
#1.5# #1209391765600#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_jce.jar#
#1.5# #1209391765600#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store X:
sapmnt
BID
global
security
lib
tools
iaik_smime.jar#
#1.5# #1209391772256#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209391772272#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5# #1209391781647#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure store.#
#1.5# #1209391797319#/System/Configuration/Logging##com.sap.tc.logging.APILogger.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#resource bundle name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5# #1209391797366#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[main,5,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester cannot establish the connection. (sapdev)#jdbc:as400://sapdev/SAPBIDDB;transaction isolation=read uncommitted;data truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor hold=false;true autocommit=true#<null>#
#1.5# #1209391819319#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209391819319#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.tc.logging.ListFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209391819335#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209391819335#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209391819381#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209391819381#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209391819381#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209391819381#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#default.trc#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209391819381#/System/Configuration/Logging##com.sap.tc.logging.APILogger.Log[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#Log#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209391819381#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#sqltrace.xml#com.sap.sql.trace.SQLTraceXMLFormatter#com.sap.sql.trace.SQLTraceXMLFormatter#
#1.5# #1209391819381#/System/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Warning##Java#SAP_LOGGING_FORMATTER_ERROR##Attempting to change a formatter on active log ! The reset() method must be called first!#1#.
system.log#
#1.5# #1209391819397#/System/Configuration/Logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the has been changed from to )!#5#formatter#FileLog#.
system.log#com.sap.tc.logging.ListFormatter#com.sap.tc.logging.ListFormatter#
#1.5# #1209391819428#/SystHi Dorothea,
Thanks for the reply. The property rdbms.connection is already set to jdbc/pool/<sid>.
This is the file content for config.properties.
#Generated by Config Tool
#Wed Oct 17 20:18:08 EDT 2007
rdbms.maximum_connections=5
system.name=BID
secstorefs.keyfile=/sapmnt/BID/global/security/data/SecStore.key
secstorefs.secfile=/sapmnt/BID/global/security/data/SecStore.properties
secstorefs.lib=/sapmnt/BID/global/security/lib
rdbms.driverLocation=/usr/sap/BID/SYS/jdbc/tbx/jt400.jar
rdbms.connection=jdbc/pool/BID
rdbms.initial_connections=1
We are using the toolbox driver.
The configtool gui opens up properly.
We tried editing the password for the admin/password/BID...
in the secure store but still comes back with the same error.
We did not change the the jdbc/pool/BID/Password as we were not sure.
What should jdbc/pool/BID/Password correspond to? We are putting in the J2EE_ADMIN passwords as the admin/user/BID is J2EE_ADMIN
If we change the password for the jdbc/pool/BID/Password, we believe we should be using the password for the jdbc/pool/BID/User, which in this case is SAP<SID>DB or SAPBIDDB.
We have verified the passwords for this user SAPBIDDB on the i5/OS and they look ok to us.
To verify, also logged in the portal using J2EE_ADMIN and the password given here in the configtool.
Still the same error persists.
Thanks
Sap Ques -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
"An error occurred while updating the configuration"
I recieved an Apple Airport Base Station in the mail today. I got it second hand, and I performed a hard-reset since I didn't have the password and stuff. I wanted to update it properly before I started using it.
I have followed the guides in here point by point, but all I get when I am trying to connect with the AirPort Admin Utility is the error in the topic: "An error occurred while updating configuration".
I've been surfing and googling for hours now, and can't seem to find the solution to this.
The Base Station has a model no. M8440, and that's all I know about it. First I thought it was the Snow, then the Graphite and now I don't know. The reason I get confused is because I've read about all these different colored lights.
Here's a description of my Base Station - in case someone recognized it, and can help me identify it:
- It's one of those "UFO's"
- It's all white, with a silver Apple-logo
- It's got three ports: Modem, WAN and LAN
- It's got three lights - ALL WHITE all the time.
I've tried to download firmware - the last I tried was called AirPortFW4.0.9.img - but when I try to run it by clicking it I get the error "The destination folder "AirPort whatever firmware whatever" is on a locked volume.
My computer is a 2,0 HGz MacBook Pro, and int the AirPort Admin Utility the Base Station is said to be V4.0 dev with IP 192.42.249.13 - so it seems to be hard-resat all right...
Please folks...help me out!I've also encountered the same problem with an older dual ethernet airport.
I first started having problems with the original one about 8 months ago, and after spending a ridiculous three hours on the phone with AppleCare they sent me out a refurbished replacement. That one worked fine for about 5 months, but then started dropping the signal again, before becoming "unfindable". I went through the same processes, (soft reset, then hard reset etc.) which sometimes solved the problem. I eventually I took it to an Apple Store and of course, it worked fine once I got there. Strange thing is, I took it home and it continued working without incident...for a month. When it happened again, I decided to forgo all the the diagnostic work and just take it back to the store. Sure enough, it fixed itself again, then broke again a few weeks later (now).
Unfortunately, I just had knee surgery and can't get down there now, (which was getting ridiculous anyway), so I went through everything again for the first time on the MBP. I ended up getting the "An error occurred while updating the configuration" message, and after reading this thread started up the old TiBook. The reconfig worked on there, but it still isn't visible on either computer. In fact, it then becomes inaccesible even through LAN on the TiBook through either the AirPort Admin or the dropdown, though it did appear on the MBP via AirPort Admin. However, it says the software on the airport cannot be uploaded or changed due to out of date software on my computer, and suggests I go to apple.com/support to update my computer's software, which is already current. It does however say that I may be able to change the settings and so forth, which I was able to do. Unfortunately, it still does not show up anywhere else on either computer, no matter how much I tinker with the settings.
Any ideas? I suppose I'll just stick with built-in ethernet till I am mobile again.
MacBook Pro 15 Intel Duo Core 2.16GHz 2GB/100GB Serial ATA drive@7200rpm Mac OS X (10.4.7) '02 Titanium Powerbook G4 1GHz 1GB/60GB/Superdrive (currently awaiting a new hard drive) -
*Error occured while working with configuration (scanning)*
Hello Experts,
I am unable to open any of the java tools (config tool, Visual admin tool, NWA) and even web channel.
when i try to connect to DB through Config tool, I get the error as
Error occured while working with configuration (scanning)
Msg: Error occured: Secure store lib Dir does not exists
,hostname>\sapmnt\<SID>\SYS\Global\security\lib\tools.
After restarting the server it works but the next day the same problem appears.
Our environment
Application :CRM 2007
Os:win 2003
Db:Mssql 2005
Could anyone help me analyse the root cause and fix the issue.
Thanks & Regards,
Ajay Kumar.Hello juah,
Thanks for the reply..
uninstalling antivirus server it is working fine, I think antivirus is stopping that server service.
But with antivirus same problem appears every day. should i edit bootstrap.properties and change the location of the libraries from
xx\sapmnt\J2E\SYS\global\security\lib\tools to C:\usr\sap\J2E\SYS\global\security\lib.
Regards
Ajay -
"An error occurred while reading the configuration"
I updated my Time Capsule (1tb, old) with the new software last night (to 7.4.1 from 7.3.2). The upgrade process seemed to work fine. I then tried to go into the TC with Airport Utility 5.4.1 and when I click on the TC, I get a message that says, 'An error occurred while reading the configuration. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-5). I've rebooted the TC. I have plugged into it directly.
It now asks me for my password. I type it in and then I get the message. Any suggestions? Downgrade? Re-run the upgrade? Reset the TC?foohan,
I had this same error, and I did have to reset (hold down the reset button for 5 seconds) my AirPort Extreme and Time Capsule to get past it. I noticed two things, though.
1. If I tried to connect to my Time Capsule from Finder, I got an error. But if I clicked the "Connect As" button, it asked for my password again, and I could get to all of my files to back them up.
2. All of my files were still on my Time Capsule after I reset it. I use it for remote file storage, not Time Machine, so I can't tell you if Time Machine backups will pick up where they left off.
Hope this helps. -
CRITICAL: Error occured while working with configuring .in WAS deploytool
Hi,
I have installed developer workspace WAS edition SP11.
I had given a master password to all the users created while installation.
But now for deployement and visual administration that password is not working.
So i started deploytool to enable Superadmin.
It allows me to change the value but when i save it,
it throws error stating:
<b>"CRITICAL : Error occured while working with configuration"</b>
and then deploytool stops abruptly.
Unless I enable superadmin, i wont be able to reset all my passwords.
How do i proceed??
AbhiJeet..Hi all and Abhijeet especially,
have you found the cause of this problem? I'm experiencing exactly the same thing. What's to be done about this?
<u>excerpt from configtool log file:</u>
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
at
com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:337)
at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:59)
at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:608)
at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
at
com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
... 5 more
Message was edited by: Chee Choong Ching
Maybe you are looking for
-
why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7. I'm sure it did when I first got my computer. Could it be that I have lots of other photo software that may be interferi
-
Boris Title Crawl Stop at last line
I have the Boris Title Crawl that comes with FCP version 6. I have a "Credits" list at the end of the video with my company at the last line. TC continues (while the music is playing) until the last line scrolls off of the screen (I am using "Roll")
-
S2S VPN only works in one direction
I'm very new to cisco devices but we recently acquired a catalyst 2911 device for our co-lo cabinet and I am trying to get a site-to-site vpn connection working between the facility and my offices network as well as a remote access VPN for me to use
-
My MacPro is having the sleep problem again after I installed and unstilled Adobe Photoshop Elements 13. It had been working fine for the last few months until the Adobe software. I have worked with 2 Apple advisors and 1 Apple sr. advisor. But they
-
Webex Meetings Server emails w/Exchange 2010
Can someone tell me the correct format for entering the email address in Webex Meetings Server for sending notification emails? I can get them working internally with Exchange 2010 but they seem to come from [email protected] Does this mean I need