Error occurred while getting a schedule list.The system cannot find the fil
Hi all,
If i open the "packages shedule status".I am getting error like "Error occurred while getting a schedule list.The system cannot find the file specified".How to fix this issue?.Anyone have idea please share.
Thanks in advance
AD
Hi Venkii,
This kind of error message is usually fixed by deleting all entries in tblSchedule table and in tblScheduleHist table in SQL, and then deleting all schedules in the Scheduler server (Control Panel --> Scheduled Tasks)...
Hope it will help...
Kind Regards,
Patrick
Similar Messages
-
Hello All
I have TMG server installed on windows 2008 R2 64x with 3 network adaptor (Lan,Premiter and External), but for some reason the clients on premiter Network cant get ip addresses from dhcp which located on LAN. i have done
ipconfig /release
ipconfig /flushdns
ipconfig /renew
but no success...... also uninstalled premiter network adaptor and reinstall network adaptor still no success.....getting this error.
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified
by the way My Lab is based on Hyper-v
any help would be much greatfull
thanksHi,
Have you checked the TMG logging?
You could try the troubleshooting steps in the thread below.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/an-error-occurred-while-releasing-interface/4261cacb-e924-4d74-a349-4f3b898c27a9
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
I am getting error on creating even the empty web application project. The error message is as given below:
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
I am using following build of Visual Studio:
Visual Studio Professional 2013. Version 12.0.30723.00 Update 3
Looks like it is the problem with the installation of the visual studio. But I can't take risk of re-installing now because it would stop my going on development work.
Any would help to resolve this would be appreciated.
P.S. I am also having Visual Studio 2010 and Visual Studio 2012 Ultimate on my system.
Regards, RandeepHello Randeep,
Will you get the same error when creating any other apps, like C# WinForm?
If only web application project has the problem, you can try the following to reset the templates:
Please open Windows Explorer, and navigate to <Visual Studio Installation Path>\Common7\IDE (by default is C:\Program Files \Microsoft Visual Studio 12.0\Common7\IDE);
Delete the ItemTemplatesCache, ProjectTemplatesCache folder;
Open Visual Studio Tools/Developer Command Prompt for VS2013
under Start menu -> All Programs -> Microsoft Visual Studio 2013 -> Visual Studio Tools (run it with Administrator privilege: right-click the program -> Run as administrator);
Run the devenv /InstallVSTemplates switch;
Run the devenv /Setup switch
If all your projects get this error, please try repair the installaiton from control panel first. By the way, can you use Visual Studio Web projects before you get this error? And have you tried to use the Visual Studio Update 4, I see you still used
Update 3, is there any reason for you to still use the Update 3 version?
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.good
-
Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support -
System error 3 has occurred. The system cannot find the path specified
Enterprise Manager 12c Release 2 - 12.1.0.2.0
Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
Deployment Phase Name: Secure Agent
Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
Recommendation:
Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
Any ideas? thanksI installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
ssh WinHost
The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
oracle@WinHost's password:
Last login: Wed Sep 19 17:26:40 2012 from SomeHost
oracle@WinHost ~
$ cygrunsrv -h
Usage: cygrunsrv [OPTION]...
Main options: Exactly one is required.
-I, --install <svc_name> Installes a new service named <svc_name>.
-R, --remove <svc_name> Removes a service named <svc_name>.
----------------- blah blah blah ------------------------------------
Report bugs to <[email protected]>.
oracle@WinHost ~
$ date
Thu, Sep 20, 2012 10:10:01 AM
oracle@WinHost ~
$ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
oracle@WinHost /cygdrive/c/oracle/product/emagent12
$ ls -la
total 0
drwx------+ 1 oracle None 0 Sep 20 09:55 .
drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
Thanks -
Getting Error- Desktop\WSDL1\main.wsdl The system cannot find the path spec
Hai to every one !
iam using wsdl file which is downloaded "wsdlzip" file from wsnavigator to my desktop.
Extracted zip file .
i used main.wsdl file as adaptive webservice model in webdynpro application.
I developed application then iam not getting output , facing error like
java.io.FileNotFoundException: Desktop\WSDL1\main.wsdl (The system cannot find the path specified)
could any body help me on this.Hi Eswar,
While importing WSDL using Adaptiver WS did you use the WS destinations. If yes, then did you create WS Destinations in the Visual Administrator?
You need to provide the url of the webservice in WSDestinations in Visual Administrator. It should be the url of the webservice in which the webservice is deployed and not the desktop URL.
the url will be like this
Ex: http://host:50000/OrderRequestForEBasis/Config1?wsdl
This url you can get by going to
http://host:port/wsnavigator in which server your webservice is located.
Thanks,
Gopi -
when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what. -
I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine -
I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.
Nevermind I fixed it. Thank you.
-
I used to open the link" http://supportdocs.sonybiz.net/indexes/pi%5CLFS%5CMay_2004%5C00035186.pdf" in firefox earlier. Now I use version 5.0. Recently I noticed that such links in pdf are not opening with firefox and getting an error that "The system cannot find the file specified. " But the same is opened in other browsers. I do not know whether it is a settings problem or limitation of firefox.
It is very much helpful if someone can help me in resolving this issue.That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf -
Error when running Get-DatabaseAvailabilityGroupNetwork "The system cannot find the file specified."
Exchange 2013 CU7 on Windows 2012.
I have a 3 server DAG (newly created) and the EAC lists each server with Is Operational = Yes.
When I run Get-DatabaseAvailabilityGroupNetwork on any of the 3 servers I get:
[PS] C:\>Get-DatabaseAvailabilityGroupNetwork
Could not load file or assembly 'Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
+ CategoryInfo : NotSpecified: (:) [Get-DatabaseAvailabilityGroupNetwork], FileNotFoundException
+ FullyQualifiedErrorId : [Server=<servernameremoved>,RequestId=11e182c9-cb4a-4f48-b985-dc4be7ef97ef,TimeStamp=2/23/20
15 10:00:53 PM] [FailureCategory=Cmdlet-FileNotFoundException] 586ECE82,Microsoft.Exchange.Management.SystemConfig
urationTasks.GetDatabaseAvailabilityGroupNetwork
+ PSComputerName : <servername FQDN removed>
Any suggestions?Try to run below command and see what it shows.
Get-DatabaseAvailabilityGroupNetwork -server node1.domain.com
BR/Deepak -
DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
Can I know what this mean? It completely fail all entire job.
Backup was on half way go, it already took about 3TB data and it fail.Hi Oneoa,
Please verify the antivirus exeptions. Look at this two links for more information:
http://technet.microsoft.com/en-us/library/ff399439.aspx
http://support.microsoft.com/kb/928840
I hope this solves your problem, please post your progress so I may assist you further.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com -
I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003
I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.
Maybe you are looking for
-
How to configure a proxy server for Windows Azure Tools in Visual Studio 2013
Hi Visual Studio/Azure Tools team I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. U
-
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would b
-
Volume button not working in vibe x2
Hi my device is lenove vibe x2-apafter upgrading to lollipop my phones volume button not workingwhile incoming call coming not able to put in silent mode also.this is serious problem, please fix it. please realse the update asap.
-
I wanted to get the following reports in SAP against projects 1. Management report 2. Tax report 3. Statuatory report 4. Compliance (employee hours) report. Are are standard reports available in SAP for the above four report requirements?
-
Hello, I got ipad 3 I can't hear anything withou headphone