"error occurred while loading content" ?

Curious if anyone is having the same problems with their Apple TV.
It first started when we tried to rent episodes from Apple. We'd purchase the episode, it would be ready for veiwing, and after about 5 mintutes the "error occured while loading content". We'd go over to netflix and I could watch old episodes of various tv shows without a problem. Downloading a movie rental in HD would also take up to 5 or 10 minutes.
I checked our wireless modem - everything was working fine.
I reset the network settings on the Apple TV and checked that it was up to date. Also reset all the username/password stuff.
That did the trick for about a week and now we're having the same problem.
Thoughts anyone?
Thanks

I'm somewhat convinced that errors on the network (or for that matter over HDMI) can cause corruption of the Apple TV. In such cases restarting the Apple TV by removing ALL the cables for 30 seconds, usually does enough to reset things.

Similar Messages

HT1498 Error occurred while loading content

Rented movie. Downloaded. Now will not play.

When you rent a movie on the device it loads a portion and then will start to play as it continues to load. There is no storage so each time it will need to reload. Best to verify network first
What is your speed via speedtest.net
Check istumbler or netstumbler for interference
Make sure you're using ISPs DNS (settings - network - DNS should be automatic)

Apple TV2 throwing "An error occurred while loading this content"

Hi
I have purchased an Apple TV2 recently and tried to watch rental movies. Preview of all the movies working fine but after rental is consistently giving error "An error occurred while loading this content". I have 8Mbps line and can rent movies from my PC and also from iPad. But Apple TV is giving this error.It also gibe similar error while trying to watch video podcasts of bigger size. I have done the recent apple TV update but no luck. Frustrating. Any help from any one. I have now rentals on my Apple TV that can not viewed and going to expire in 3 weeks.
Regards
Anil

are you renting these movies directly from the appleTV or are you renting/downloading from iTunes on a computer then streaming to appleTV?

ATV2: Error occurred while loading this content

This error started appearing out of the blue today. And I'm nearly at my wits end with this, because no solution I could possibly think of makes any difference. I would get this error intermittently once a month or so, but unplugging ATV2 and doing a cold start would usually resolve this.
Any ideas? Anyone?
Symptoms:
"An error occurred while loading this content" appears
It appears exclusively for movies, TV shows and music in my iTunes library
It affects all media - nothing in my iTunes library will play
Streaming of purchased content form iTunes store is not affected by this error
I am able to play my iTunes content on my Mac
I am able to play my iTunes content on a different Mac via HomeSharing
I am unable to play any media stored in my iTunes library on my ATV. Period.
What I've tried (to no avail):
Power cycled my cable modem (DOCSIS 3 compliant)
Power cycled my AirPort
Power cycled my Mac
Power cycled my ATV2
Logged out of iTunes store on Mac and ATV2 and logged back in
Turned off Home Sharing on Mac and ATV2 and started it up again
My setup:
I have a 25+ mbps cable internet
Airport Extreme is my main router
Mac is connected to AE via ethernet (it houses my iTunes library and has WiFi shut off)
ATV2 is connected to AE via ethernet as well
Both Mac and ATV2 have reserved IP addresses on Airport Extreme and always get the same IP, no conflicts
Both Mac and ATV2 have a good connection speed when tested
All software and firmware is up to date and Mac, AE and ATV2

You are definitely NOT the only one here with this MAJOR issue: http://discussions.apple.com/thread.jspa?threadID=2615363
I have the same issue, and I have a 6MB AT&T Elite Pro DSL service that I have always had since purchasing my ATV2 in October. Never have I had these issues until the 4.2 update. Horrible software bug and it keeps coming back up. TV shows, movies, etc. No rhyme or reason. Some shows new, some old. Some movies HD, some SD. It is almost as if the Apple TV rolls a die and if I get an odd number, I get the error message. Even number, it plays through...
Why would Apple continue to release software updates that do not address these issues? We have to keep leaving Apple feedback on this issue that is big enough that over 13,000 views on their own message board confirm this problem since the 4.2 software update a few weeks ago...
Tell your friends: http://www.apple.com/feedback/appletv.html

An error occurred while loading this content apple tv 2

I get "An error occurred while loading this content" when trying to view a rental movie. Not all of them but a few rentals. I wonder why only a few?

Has any other fixes been found. Since I updated to the latest iOS I've been having a similar problem. It doesn't matter what I stream through either. I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix.
I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows. I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on. Frustrating to say the least.

An error occurred while loading this content - only with iPhone not iPad

I know this issue has been discussed to death with no real solution in sight but my case is slightly different:
1. On my new iPad, I select AppleTV (not mirroring), open Safari, then to YouTube and play any HD video. Immediately, the video will be streamed to the AppleTV with no hassle.
2. I do the same on my iPhone 4, 4S or 5 and all I get is "An error occurred while loading this content. Try again later". This occurs without fail.
If I use Jasmine YouTube client, streaming will work perfectly but alas, this app is prone to the error message "Youtube has restricted feeds for this video" and thus, I can't use this.
If I use the new google youTube app, only the audio gets streamed to the AppleTV. I have to use mirroring and the video does not fill the TV screen but leaving a dark border all round. The streaming is not smooth either. The previous youTube app by Apple works perfectly - never had an issue. As soon as iOS6 came along, I end up with all these problems.
Is there a solution to all this? Currently, I use only my iPad for streaming YouTube videos but I really want to use my spanking new iPhone 5 but can't.
I am so sad.
Can anyone help or am I doomed to use only my iPad for this? I am soooo disappointed with the iPhone 5 due to this.

Has any other fixes been found. Since I updated to the latest iOS I've been having a similar problem. It doesn't matter what I stream through either. I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix.
I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows. I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on. Frustrating to say the least.

"error occurred while loading this content" ... ATV2 not even 24hrs old...

I just bought this ATV2. I am using AT&T internet with an EDGE250AEW wireless router and a Motorola modem.
I'm attempting to rent movies with my ATV2 and watch them. After a myriad of times of trying to just sign into my iTunes account via ATV2, I finally was able to rent a movie.
When I click on the movie to rent, I'll press "PLAY" and it will give me the message "error occurred while loading this content".
I realize my internet connection is slow (1.5M) so I am renting in SDef ... but that still shouldn't be preventing me from even being able to rent a movie.
I attempt to watch a movie preview ... and a 2 minute movie preview takes over 5 minutes to load ... and it wont start playing until it's completely loaded. Bollocks!
I have updated my software, I have rebooted, I have restarted, I have recycled ... no avail.
Is this a PORT opening issue? I dont know what is going on but it's REALLY frustrating to have a 100 dollar paper weight.
I AM able to use home sharing and watch movies from my Macbook iTunes to the ATV2 ... but rentals from the store via the ATV2 doesn't work.
help please

You are definitely NOT the only one here with this MAJOR issue: http://discussions.apple.com/thread.jspa?threadID=2615363
I have the same issue, and I have a 6MB AT&T Elite Pro DSL service that I have always had since purchasing my ATV2 in October. Never have I had these issues until the 4.2 update. Horrible software bug and it keeps coming back up. TV shows, movies, etc. No rhyme or reason. Some shows new, some old. Some movies HD, some SD. It is almost as if the Apple TV rolls a die and if I get an odd number, I get the error message. Even number, it plays through...
Why would Apple continue to release software updates that do not address these issues? We have to keep leaving Apple feedback on this issue that is big enough that over 13,000 views on their own message board confirm this problem since the 4.2 software update a few weeks ago...
Tell your friends: http://www.apple.com/feedback/appletv.html

I have no problem connecting my i-phone programs to my tv through apple tv. but one program from an application from appstore don't go through apple tv. It says an error occured while loading the content.This is just for one program. All other works good.

My apple TV works fine with my I-Phone 4s. But one program from one of the application I downloaded from the app store dont work. When I load that a message comes "an error occured while loading this program" This is only for one program all other most of the time works good. Any one knows why ?

Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden

Apple tv error occured while loading this content

error occured while loading this content

Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden

An error occurred while loading this content / Apple tv 3

please i need help i cannot stream rented movies on my apple tv 2 or 3 .. this message occured (an error occurred while loading this content

Has any other fixes been found. Since I updated to the latest iOS I've been having a similar problem. It doesn't matter what I stream through either. I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix.
I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows. I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on. Frustrating to say the least.

WPC Error- Cannot render container : An error occurred while loading the do

Dear All
we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
following messgae appera when we open up a page to edit in WPC
Cannot render container : An error occurred while loading the document from the resource content
we found this exception in error log in Server..
couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
#1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
#1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
#1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
     at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
     at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
Please tell us how to fix this error
regards
Buddhike

Need to upgarde to SP14

INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI'

Hi
I got the below error message while installing the Oracle 11g R2 Database Grid software on Oracle Linux 6.4 OS using vnc viewer.
"INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'."
Please let me know how to overcome this error and proceed with the installation.
Contents of the error log file:
java.lang.NullPointerException
at oracle.sysman.oii.oiin.OiinNetOps.addNICInfo(OiinNetOps.java:144)
at oracle.sysman.oii.oiin.OiinNetOps.computeNICList(OiinNetOps.java:109)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:76)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:90)
at oracle.sysman.oii.oiix.OiixNetOps.getFullHostName(OiixNetOps.java:49)
at oracle.install.library.util.MachineInfo.getFullHostName(MachineInfo.java:109)
at oracle.install.library.db.RAC92Info.is92RACPresent(RAC92Info.java:115)
at oracle.install.ivw.crs.view.InstallTypeGUI.onEvent(InstallTypeGUI.java:120)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:458
oracle.install.commons.flow.FlowException: [INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'.
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:510)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: java.lang.NullPointerException
at oracle.install.library.crs.CRSInfo.getDefaultIPAddressForGNSVIP(CRSInfo.java:584)
at oracle.install.ivw.crs.view.GridPlugPlayInfoUI.onEvent(GridPlugPlayInfoUI.java:373)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
... 12 more
---# End Stacktrace #-----------------------------

Hello,
It's a Bug.
Try selecting all languages and give a try ...
Bug 9632373: UNEXPECTED ERROR OCCURRED WHILE LOADING THE VIEW 'GRIDPLUGPLAYINFOUI'
<Moderator Edit - deleted MOS Doc content - pl do not post such content - it is a violation of your Support agreement>
Thank you

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

"error occurred while loading content" ?

Similar Messages

Maybe you are looking for