Error Occurred while saving the purchase order

Dear Experts,
While changing PO and Schedule Agreement using T.Code : ME22, ME32 we are facing below error message.
Problem occurred While altering and saving the purchase order.
Error message FGV004 - "SYST:date 00.00.0000 is not permitted" is generated
when modifying an Scheduling Agreement that does not have a Delivery
Schedule using ME32L.
Please Kindly help to fix this error as soon as possible.
Thanks in Advance.
Prasath Manoharan

hi,
In addition to above..
I also checked for the SAP note...
It shows only one note regarding MM...
pls check the sap note 355827..
As per this note you need to add few corrections...pls take help of basis consultant..
Regards
Priyanka.P

Similar Messages

  • Error occured while saving the user account information

    I'm trying to install LiveCycle ES 2 with PDF Generator on a Windows 2008 server wtih SQL Server 2005.  When I run the configuration manager I get an error in the step where you add the administrator user credentials for generator.  The error I'm receiving is ALC-PDG-080-032-Error occured while saving the user account information.  Has anyone seen this issue before?  Any ideas on what the problem may be?

    Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
    Good luck, and please report your findings,
    Hunt

  • Error occured while Saving The Project

    I have a project that is giving me a 'unknown error occurred while saving the project. Select 'Save As' from the file menu and save the project to a new location'.
    It would seem that maybe it's saying that it's out of room but I'm saving on a harddisk that has over 1T of space left. I tried to do as they said and create another folder and save in a new location but  it gives me the same error.
    Has anyone dealt with this.? I have a wedding project that I can't make any changes to. It was doing this before and after I updated to Adobe 4.2.
    Using:
    Adobe Premiere Cs4
    Matrox RXT2
    6 Rams of memory
    4T system
    Windows Vista 64 Bit
    Nividia GEForce 9600

    Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
    Good luck, and please report your findings,
    Hunt

  • An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

    Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
    Does anyone know what could cause this error message?
    Thanks a lot for any hint.
    Sergey

    Hi Henry,
    I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
    I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
    Please let me know if this is unusual for this version.
    Regards,
    Arvind E

  • An error occurred while saving the following file

    I want to build an app but I get this message:
    An error occurred while saving the following file:
    C:\Acquire U6 DS&FTP\Acquire U6 DS&FTP.vi
    Nothing more, absolutely nothing more.
    Before that I could build it without problems, now I can't. The file in the message is the main file (by the way it runs fine). I've tried creting a new project but it doesn't work.
    I really hope somebody can help me.
    Thanks,
    JuanM

    What's changed in your code?  Have you tried undoing anything or reverting back to a pervious version?
    Reese, (former CLAD, future CLD)
    Some people call me the Space Cowboy!
    Some call me the gangster of love.
    Some people call me MoReese!
    ...I'm right here baby, right here, right here, right here at home

  • Error message while saving the sales order

    hi all,
    i have maintained a material material master, sold to  etc  pr00 conditions maintained, schedule line is determined correctly  but i am still getting this message while saving the order
    "Product 234345 does not have schedules assigned. Contact system administrator
    Message no. ZV276"
    can anybody help?
    Sa

    Suman,
    i would suggest you please sit with your abaper he can might be solved your issue.
    because Message no. ZV276 seems to be comes from user-exit which you implement for VA01/VA02 Tx.
    Amit.

  • MS Word 2007 - An error occurred while saving the Normal Template

    Good Morning... 
    I have a user that is getting the following error. I can resolve the issue if I delete the old normal.dotm and let it create a new one however this users has a lot of custom building blocks and she didn't have a good backup. From what I've been reading and what other coworkers say i'm close to just telling her that she'll need to start over however I thought I would reach out one last time to see if anyone may have a way to "export/recover" the building blocks out of the current normal.dotm file and then "Import" them back into a new normal.dotm. This user has Office 2007Thanks
    This topic first appeared in the Spiceworks Community

    Hi,
    Can you try the following steps and let us know if it works?
    1. Create a folder in your c: drive (say c:\myjdevhome)
    2. Invoke the command prompt, set JDEV_USER_HOME=c:\myjdevhome
    3. cd to JDEV_HOME\jdeveloper\jdev\bin
    4. Start the jdev (jdev.exe).
    5. Run/Debug your application.
    -Arun

  • Error While saving the Production Order

    Dear Experts
    Pls let me know why am getting the below error while saving the production order after release..
    PSFC_STD_LAYOUT does not exist
    Message no. SSFCOMPOSER004

    Dear,
    Please check have you assigned the scheduling profile in work scheduling view of materail master?
    Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
    Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
    Regards,
    R.Brahmankar

  • When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

    I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
    Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

    So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

  • When ordering a project I'm getting a message " an error occurred while contacting the Apple online store. Please try again"  Can anyone please tell me why I might be getting this message and how to fix the problem.  Thank you

    When ordering a project I'm getting a message " an error occurred while contacting the Apple online store. Please try again"  Can anyone please tell me why I might be getting this message and how to fix the problem.  Thank you

    I've got the same problem.
    It wasn't the case before the upgrade to v 9.2 (Iphoto 11) yesterday.
    The previous solution preferences - advanced - "select a store" (last option) doesn't solve it anymore.
    Thanks!

  • TS3297 An error occurred while contacting the store appeared in in-app purchase

    An error occurred while contacting the store appeared in in-app purchase

    Update: I am not sure what fixed it but immediately after posting this question I was able to successfully order. Maybe I needed to log in with my Apple ID to establish a connection another way? Anyway. Solved.

  • An error occurred while preparing the installation. Try running the application again

    I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
    When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
    This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
    I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
    I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
    Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
    Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install  PROJECT:Install-846
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA  PROJECT:InstallAssistant-476.8
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
    Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
    *****This is where the timer starts saying “”About a minute remaining”*****
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
    Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
    Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
    Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
          "Kernel Cache" = "/.IABootFiles/kernelcache";
          "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
    Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
    That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
    By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
    Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
    Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
    Thanks in advance!

    Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
    I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
    First, my specs
    Secondly, I am running an aftermarket 500 GB drive.
    Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
    And finally, here is the seeminly unavoidable error message.
    Also, other things I've tried now are
    installing it from the "show package contents area",
    mounting said DMG and trying to install from there.
    installing a package file called "upgradeos.pkg"
    no luck.

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

    Hi all,
    I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
    "an error occurred while generating the report. the application will exit" and Certification tool just crushes
    I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
    Can't insert images into post because of not verified account so imgur:
    http://imgur.com/ptT0cU3

    Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
    Another member has same question.
    https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
    If you want to test your app, you can also send to beta store and you can get response from the testers.

Maybe you are looking for

  • Using Find My iPhone with Snow Leopard and iPhone 4S

    I just upgraded my family's three iPhones from 3GS to 4S. I have a family MobileMe account and would like to continue to use Find My iPhone. I cannot upgrade my OSX on my Macbook Pro past Snow Leopard without rendering a professional app that I use f

  • Alt text for photos not appearing

    Hi, I tagged a large document in InDesign (because Acrobat Pro's feature is too unpredictable). I assigned alt text to all the photos, but when I hover my cursor over them while viewing the exported PDF, only some are showing up. It turns out that la

  • Keynote converts RGB to CMYK in PDF mode

    Is there a way to keep an exported Keynote file in the RGB mode when creating a PDF file? If not, Apple needs to think about this option. Not all PDF files are meant to be print documents. This is really compromising a design we are working on.

  • Updatemanager fails with "unknown subcommand getdocument" message

    When I run update manager it fails with following message: unknown subcommand getdocument Stack Trace: com.sun.swup.client.engine.solaris.CollectionFileException: Unknown subcommand getdocument. at com.sun.swup.client.engine.solaris.PatchCollection.p

  • Submit Warning Live Cycle Form (with Chunk)

    Hi, I have created some pdf forms with Live Cycle Designer and save them in my database as base64 string. I created XDP with formdata and CHUNK of this pdf form from database and show this XDP on browser. This all works fine. but when user tries to C