Error occurres when exporting in CS4

Hey all,
Here's my problem. Adobe Fireworks CS4 either crashes or I get a "Could not complete your request. An internal error occurred."  I've tried uninstalling the program and re-installing...no success.  I've also tried using different fonts hoping it was a corrupt font - no success. I've checked (and rechecked) links and slices, but they're all accounted for and going to assigned layers properly. This file is 1.15 meg. large and have exported other files after problems with this particular file started and they exported fine. I am using Windows Vista Operation system. Any pointers or advice would be greatly appreciated.

Also make sure that none of your slices or pages have illegal characters in them, like asterisks, etc. Also double chaeck your page names to be sure there are no empty spaces in the page names, especially leading or trailing spaces.
HTH

Similar Messages

  • Error message when exporting

    keep getting error message when exporting 12 min project from premier pro ,
    never had this problem.
    Adobe tech used remote access to assist me with something and changed settings etc.

    WHAT error message?
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?

    Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?
    I'm using FCPX 10.2
    Yosemite 10.10.3
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free

    It appears Apple's latest update has solved the issue. Whew!
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free
    Yosemite 10.10.3
    FCPX 10.2

  • I receive error message when exporting or converting pdf to word

    i receive error message when exporting or converting pdf to word

    Me too and I cannot find online support of any kind. It was hard enough to get to find this forum. Is there a tech support chat or phone number anyone can provide? Thanks!

  • Quicktime pro error -43 when exporting

    trying to export produces error -43. poster in another forum said the error went away when running as administrator.
    anyone have any info or experience with this problem and a work around or fix?
    much appreciated,
    tcb

    I get the same error, "-43" -> when exporting, there doesnt seem to be a reasonable solution either. Quicktime *****

  • 'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

    'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

    One of the following steps should help.
    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:  > "Enable Plug-ins".
           or
        Internet Plug-ins >  "Allow all other plug-ins
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes beside all items.
        Check the box beside "Remove all website data".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • OS Status error -9459 when exporting slideshow

    I've put together a 17 minutes slideshow in iPhoto using the scrapbook theme. I've received this error twice now - once when using the default "display" size export to mp4 and a different time when using a more customized export to .mov using no compression.
    After the first error, I rebooted and the export worked. I am trying a reboot again to see if I can export again with the new settings.
    Anyone know why I'm getting this error and what it means?
    "The operation couldn't be completed.
    (OSStatus error -9459.)"

    You may have a damaged library. Try the following: backup and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select the last three options.
    Click to view full size
    This topic has considerable discussion on that particular error message and possible fixes: Error 9459 Potential Fix
    Also Apearl reported in this topic, http://discussions.apple.com/message.jspa?messageID=11195681#11195681, setting the Energy Saver to never sleep would avoid that error message when exporting the slideshow. Not a fix, but a workaround.
    Also if you search the iPhoto forum for 9459 you'll find many more topics covering the problem and some potential fixes.

  • Error -108 when exporting movie iMovie??????

    error -108 when exporting movie iMovie??????

    As a guess, try right-clicking on your Event and see if it allows you to Optimize Media. If it does, choose Optimize - Full.
    Your export should now work.

  • Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

    Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
    so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
    I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
    Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
    It think it gives this error message when i reach 24% everytime during export.
    So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
    anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
    Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
    Taphabit

    boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
    NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
    OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
    is there any way of preemptively avoiding it in future projects?
    thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

  • Unable to create volume - error message when exporting

    Hello - relatively new Mac and iphoto user here.
    I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over. What's going on? I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
    I would move them to my external hard drive but I'm having trouble with it too. It won't even show up. When I run a disk utility on it it says it can't be verified. Sigh. So that's a whole other issue that will probably take something like Disk Warrior to clean up.
    In the meantime, I'm trying to move images to the thumb drive then I'm putting the thumb drive in my other computer and moving the images from the thumb drive to it's external hard drive A long process when you can only move about 20 images at a time from iphoto.
    I'm just trying to move a good bit of old photos out of iphoto on the Mace because I'm scared that the program or even my entire computer is going to crash and I'm going to have data loss.
    What can I do about the "unable to create volume" message? And what's with the "file in use" error message when I try to move the images off a file folder on the desktop.
    Is there a better way to move 1GB of photos all at once to the thumb drive?

    Welcome to the Apple Discussions.
    Seems to be two issues complicating things here:
    I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over.
    What format is that wee drive? Mostly there are FAT16 or FAT 32 and there is a limit to the number of objects they can have on the root of the drive. The workaround is to export to a Folder on the desktop and copy that over.
    Which brings us to:
    I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
    You will sometimes get this message when you try to export two files +with the same name+ to a Folder. As you know your camera is well capable of producing many files called something like DSC_1234.jpeg. In iPhoto these will be in separate folders, so no problem. However, when you go to export them to the Folder on the desktop if iPhoto continues the export one will overwrite the error.
    Solution: Give the Pics a title (Photos -> Batch Change) and a sequential number. Then when you export, in the export dialogue you have the option to use the Title as filename.
    Regards
    TD

  • Error 541 when exporting to PDF

    Post Author: BCLin
    CA Forum: Other
    Hi,Our application is using Crystal Report VCL (version 9) component for exporting reports.I have a customer reported that he got an error message "Not enough memory for operation" when exporting the report to PDF. I opened the .rpt file sent in by the customer in XI, and tried to export the report in XI to PDF, failed due to "memory full". By deleting something in the report header and reset the database location, it now can be exported within XI, but it is still failed to be exported to PDF through my application, the error message is changed to "Error: 541 Error detected by export DLL...", but it is no problem to export other .rpt files through my application.  It seems there are differences between those .rpt files cause above problems, but what are they? Can somebody here tell me what do I need to check to find out the differences? Thanks in advance.

    turn down the little triangle next to the 'red' error message--you sholud then see what the (2) problems are

  • Error 2 when installing Fireworks CS4 Trial?

    Hey, I keep getting the Error: Error 2 when ever I try to install Fireworks CS4 Trial, downloaded from Adobe.
    Installing: Adobe Fireworks CS4
    Adobe Exstention Manager CS4
    After its pretty much done, it say's finished but with Error's, hit view info, and I keep getting Error 2.
    Tried dowloading the trial from other sites, and that still doesnt work.
    All my Adobe products of CS3 have been uninstalled.
    Problem help?

    Fixed it!  Yay
    I've got to say - I owe it all to a guy called Justducky on macosx.com.  Still, here's the story.  After search around I found his post about a similar problem with Dreamweaver.  He dug, and delved and worked on permissions etc but nothing worked.
    Finally he got down to the solution:
    Uninstall everything Adobe.  I mean everything.  AIR, flashplayers if you can.  Everything.  Delete .plist and .pref files that have adobe in the name (carefully).
    Create a new account that has admin privileges (not convinced this was necessary but don't know Macs enough to confirm)
    Safe Boot and log into the new account
    Install Fireworks.
    And there you go, it works.  Simple eh?  As an extra precaution when installing Fireworks I only did the bear minimum.  I didn't install Air, Media Player, Bridge etc.  I have done now and they work.
    You can read the full account of JustDucky's journey here
    Hope this works for you too!

  • ICC error Message when Exporting PDF

    I hope someone can answer this for me, I searched the web and could not find anything like this. The Newspaper I work for had their Ink supplier create a custom ICC profile for their press. I set up Indesign to use the profile in the color settings as well as when exporting to PDF. Now when I export I get a error message stating "Version 4 ICC Profiles will be converted to Version 2 ICC profiles during PDF Export" most of the time the color on the pdfs come out fine, but there have been a few where the color changes/shifts. Does anyone know why this message appears and is there a way to fix it? I will be doing alot of testing to see if I can get the message to not come up.
    Thanks
    -Dustin Bell

    I'm not sure you'll find exactly the answer you are looking for, but there's a lot of information accessible through this search:
    http://www.google.com/search?q=%22icc+profiles%22+%22version+4%22
    It's some sort of incompatibility issue with the new standard.
    Peter

  • Error message when exporting to qt, Please Help!!

    I am getting file I/O error message when trying to export a 52 minute wedding project to quicktime. I tried different quictime settings, but nothing helps. Please hep me out with this issue it is driving me crazy.
    Thanks

    Ok, I have trashed my final cut preferences, I checked and my external hard drive is set to mac osx extended. I ran disk utility, I exported to quicktime movie using current settings with movie self contained checked and I get the error message right away. Then I did it without self contained checked and it goes to 21% and I get the error message. Everytime it says this: File I/O error, that is all it says. What does this mean? What can I do next? I have a deadline for this project. I have alot of memory left on my external hard drive. This has never happened before. Thanks for all your help guys.
    D.T.

  • Error -1309 when exporting 720 resolution (Quicktime format)

    Any insight on why I keep getting error -1309 when I try to export at higher definitions? First of all, it consumes my computer for 6 hours (for a 20 minute video)! But then I come back and I've been knocked out...have to start all over again!

    50G on the computer, have tried to output / write to the internal hard drive and an external 500G hard drive. Same error keeps popping up.

Maybe you are looking for