Error occurs during creation of Quotaion with reference to Inquiry
Dear All,
When i am create Quotaion with reference to Inquiry for Export Customer it shows the Error:
Exchange rate of EUR in INR for date 00.00.0000 could not be determined
Message no. V1449
Diagnosis
You have entered a currency for which no valid exchange rate could be determined for the pricing date.
Procedure
Check whether a valid exchange rate for this currency exists for 00.00.0000.
If this is not the case, define an exchange rate in Customizing, providing you have the authorization to do this.
Also when click on error it shows another message like:
Flow control: Entry SAPMV45B, RANF, R1, * , * , * is missing in T185
Message no. V0102
I also maintained Exchange rate for EUR to INR & also for INR to EUR.
When i am create direct quotaion without reference it will create.
Plz give me Solution on the above problem.
Award pts for useful answer.
Thx & Regards,
Pankaj
Message was edited by:
Pankaj Mahajan
Pankaj,
Have you done below?
In the customer master >sales area data> sales tab page, check what is the exchange rate type maintained. Default is "M".
Now, go to SPRO>General Settings>Currencies>Enter exchange rates and under this node, check the value for USD to INR for the Echange rate type maintained in the customer master.
ALSO Create new Inquiry & Quotation after saving exchange rate..and see if error is occuring..
Reward if this helps...
Regds
MM
Similar Messages
-
Error occurs during creation of Quotaion with reference to sales Order
hi all,
I have creating a new sales organization ID88 while i have the old sales org of ID10.When i try to create the sales order reference to the sales quotation,i have received an error mentioned "
Material xxx does not exist in storage location 5201 F100" then flw by another error
"Flow control: Entry SAPMV45B, RANG, R0, * , * , * is missing in T185"
FYI, the F100 is the storage location for ID10. The material xxx is created under the sales org ID88 with plant 5201 sloc F120.
Please kindly advise me on this.
Thank you.
Kah feiHi Mahajan,
I'm using the refence to the sales order, so it shud be the same before i manage to create the sales order i already receive that both error.
And i have check my material master, i have not extend my storage location to F100, the system kept on prompt me to enter that sloc.
Furthermore,MMBe will not show up to sloc F100,while for sloc F120 it will be up to the level of batch.
Thank you. -
Oracle R12 Clone failing with RC-00118 Error occurred during creation of...
Im encountering the above error message i have seen the below thread which looks like the same issue, i was wondering if someone could confirm if the clone process requires an off-line backup on the source system for the clone process to work. Currently i'm using a tape backup which runs overnight, the system is up at the time of backup.
RC-00118: Error occurred during creation of database
Thanksthanks for quick response, its a hot backup.
the steps ive followed are
1. adpreclone on source
2. apps,db,inst directories deleted on destination. (after services have of course been shutdown)
3. oracle variables removed from path
4. backup restored from tape
5. deleted program files/oracle/inventory directory
6. on cmd window run set PERL5LIB=
followed by perl adcfgclone.pl dbTier
is there anything ive missed? -
RC-00118: Error occurred during creation of database
adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Error occured during creation of oracle snapshot
Dear All,
I am getting error messange in my SAP Inbox in t.code SBWP.
In SBWP, the nessage text is as follow.
=============================
Error occured during creation of oracle snapshot (Creation aborted)
(Log see also transaction SLG1, Object ORASNAP, Subobject ORASNAPCR)
Oracle snapshot creation program aborted
Error while copying from oracle view to SAP table
Oracle view SAP$KCBFWAIT
SAP table ORA_SAPKCBFWAIT
Return code (ORA-....) 942
You tried to work with the name of a table or view that does not exist in the database
The table does not exist on the database. A table name or view name was used that does not exist on the database.
===============================
I also check in T.Code SLG1, but i am not getting the reason for this error.
Regards,
NisitHi,
Check each of the following :
the spelling of the table or view name.
that a view is not specified where a table is required.
that an existing table or view name exists.
Contact the database administrator if the table needs to be created or if user or application privileges are required to access the table.
Also, if attempting to access a table or view in another schema, make certain the correct schema is referenced and that access to the object is granted.
Regards
Krishna -
RC-00118: Error occurred during creation of database Raised by oracle.apps.
Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again. -
RC-00118: Error occurred during creation of databas
On 11.5.9 with windows, while running the clone with the following command:
perl adcfgclone.pl dbTier
The following error occurs:
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506616 bytes
Fixed Size 452152 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u1/TEST/testora/testdata/system01.dbf'
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.zexsa.com"
ERROR at line 1:
ORA-01109: database not open
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:658)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:479)
I found note no. 375389.1 similar to this issue.
Any body guide me, about solution no-1, how i can apply it.
after running perl adcfgclone.pl dbTier
my DB is on above mentioned stage....SQL*Plus: Release 10.2.0.4.0 - Production on Sun Feb 13 21:52:19 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 1271540 bytes
Variable Size 427821324 bytes
Database Buffers 633339904 bytes
Redo Buffers 11309056 bytes
Database mounted.
SQL> recover database using backup controlfile until cancel;
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [],
SQL> -
An error occurred during creation of the central repository. (BODI-300020)
I am trying to create a central repository for Data Service, the following error appear
Creating repository... (BODI-300026)
Reading SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms.sql>. (BODI-20002)
Reading SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms_content.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms_content.sql>. (BODI-20002)
Reading SQL file <C:\BO\DataServices_12\Admin\repo\options.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\Admin\repo\options.sql>. (BODI-20002)
Verifying repository... (BODI-300077)
Importing objects... (BODI-300036)
Adding Data Quality new substitution configuration... (BODI-300133)
An error occurred during creation of the central repository. (BODI-300020)
It's a sql DBMS, and the default user language is spanish, during the installation was the same issue.
The first installation user language was english and everything was ok, then the default user anguage was set to spanish and the jobs crashed because an english format was sent to the al_history table. I tried to recreate the repository and an error ocurrer during the creation.
has someone faced the same problem?what is the version of Data Services ? if its 12.2, then there was a bug that is fixed in 12.2 SP1 (12.2.1.0), apply the SP1 or it would be better if you apply the latest fix pack for 12.2 i.e 12.2.1.2
the problem was with date format used in insert was different than the user's default date format. -
Cloning Issue RC-00118: Error occurred during creation of database
Friends,
I execute following scripts on source system preclone.pl dbTier &perl adpreclone.pl appsTier
then take the cold source backup and transfer on another machine for cloning but when i am executing cloning script on db tier i am getting below mention error after 50% completion. I have very limited time and i cant go back on source system for fresh backup, please help me to sort out his issue.
-------------------ADX Database Utility Finished--------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyData
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDat
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyData
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier
at sun.reflect.NativeConstructorAccessorImpl.newInstan
at sun.reflect.NativeConstructorAccessorImpl.newInstan
at sun.reflect.DelegatingConstructorAccessorImpl.newIn rce)
at java.lang.reflect.Constructor.newInstance(Unknown S
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneP
at java.lang.Thread.run(Unknown Source)
Hopes you will support.
Regards
Irfan Ahmadplz check :
http://doganayn.blogspot.in/2013/11/rc-50004-fatal-error-occurred-in.html
Rapid Clone Failed While Running "Adcfgclone.pl dbTier": ORA-01194 and RC-00118 (Doc ID 375389.1)
Troubleshooting RapidClone issues with Oracle Applications R12 (Doc ID 603104.1)
Troubleshooting RapidClone issues with Oracle Applications 11i (Doc ID 364565.1)
Regards,
Haafiz -
Net Price Calculation During Creation of PO with Reference to Contract
Hi,
While trying to Create Purchase Order through ME21N transaction ,
For a line item When Contract and Contract Item is given as Reference then the Net Price of PO is calculated automatically , When Tried to Debug Standard code the Function Module "PRICING" is used to calculate this value.
But i cannot use this FM as it has lot of Enhance ment Points / Spots .
Please let me know if there ia any Function Module which Provides the Net Price for PO , When Contract and Contract Item is provided as reference.
This Net Price is picked from Contract based on Scales and Number of Condition Types maintained in the Contract.Hi
See SAP Note 201830 - Calculation of the net price of an item. Although it's for SD, I think that it could help you to understand how to do in MM (so, change V/06 by M/06, ie: pricing condition, V/08 by M/08 ie: pricing procedure).
I hope this helps you
Regards
Eduardo -
JRE 1.4 US only - Error occurred during initialization of VM
JAVA.EXE in JRE give that message Error occurred during initialization of VM with throwing NullPointerException
This is NOT happening when using JRE international
OR sdk - which is almost like JRE international but
for some unknown reason WITHOUT the SERVER
directory which is a bug for itself.I am getting a report from a customer that seems to match the symptoms you describe i.e. they see
Error occurred during initialization of VM
java.lang.NullPointerException
Did you find out what was causing this. I seem unable to reproduce the problem with the 1.4.0 US JRE. -
Error occurs during Asset Master Record Creation.
Hello SAP Gurus,
The error occurs during asset master record creation.
Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
ERROR: - as below
u2003
SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
*Message no. AA613*
*Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
Procedure
Maintain the assignment of the periods for the period control entered.
Proceed
If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
Please find enclosed attachment for clear description of the error.
Please share your experiences regarding this subject.
Thanking you in anticipation.
Regards,
Suresh.
09986375966Hi,
have you generated the period controls properly? If not, the error is raised correctly by the system.
To generate period controls go to:
IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls / or you can use OA84
Regards,
Markus -
Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
m_fields = NewArrayList()
Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
Next i
'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
stream = File.OpenWrite("D:\MyTestReport2.rdlc")
Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
' Causes child elements to be indented
writer.Formatting = Formatting.Indented
' Report element
writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
writer.WriteStartElement("Report")
writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
writer.WriteStartElement("ReportSections")
writer.WriteStartElement("ReportSection")
writer.WriteElementString("Width", "11in")
writer.WriteStartElement("Body")
writer.WriteElementString("Height", "5in")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Tablix")
writer.WriteAttributeString("Name", Nothing, "Tablix1")
writer.WriteElementString("Top", ".5in")
writer.WriteElementString("Left", ".5in")
writer.WriteElementString("Height", ".5in")
writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
writer.WriteStartElement("TablixBody")
' Tablix Columns
writer.WriteStartElement("TablixColumns")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixColumn")
writer.WriteElementString("Width", "1.5in")
writer.WriteEndElement() ' TableColumnNext fieldName
writer.WriteEndElement() ' TablixColumns' Header Row
writer.WriteStartElement("TablixRows")
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", fieldName)
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows") Since Rows tag in header is not closed not need to open fresh tag
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
'writer.WriteElementString("Value", fieldName)
writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow
writer.WriteEndElement() ' TablixRows'End of Details Rows
writer.WriteEndElement() ' TablixBody
writer.WriteStartElement("TablixRowHierarchy")
writer.WriteStartElement("TablixMembers")
writer.WriteStartElement("TablixMember")
' Group
writer.WriteElementString("KeepWithGroup", "After")
writer.WriteEndElement() ' TablixMember' Detail Group
writer.WriteStartElement("TablixMember")
writer.WriteStartElement("Group")
writer.WriteAttributeString("Name", Nothing, "Details")
writer.WriteEndElement() ' Group
writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixRowHierarchy
writer.WriteStartElement("TablixColumnHierarchy")
writer.WriteStartElement("TablixMembers")
'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
writer.WriteStartElement("TablixMember")
writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixColumnHierarchy
writer.WriteElementString("DataSetName", "tbdataset")
writer.WriteEndElement() ' Tablix
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' Body
writer.WriteStartElement("Page")
' Page Header Element
writer.WriteStartElement("PageHeader")
writer.WriteElementString("Height", "1.40cm")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Textbox1")
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", Nothing, "ABC CHS.")
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TextBox
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' PageHeader
writer.WriteEndElement() ' Page
writer.WriteEndElement() ' ReportSection
writer.WriteEndElement() ' ReportSections' DataSources
writer.WriteStartElement("DataSources")
writer.WriteStartElement("DataSource")
writer.WriteAttributeString("Name", Nothing, "tbdata")
writer.WriteStartElement("DataSourceReference")
writer.WriteEndElement() ' DataSourceReference
writer.WriteEndElement() ' DataSource
writer.WriteEndElement() ' DataSources'DataSet
writer.WriteStartElement("DataSets")
writer.WriteStartElement("DataSet")
writer.WriteAttributeString("Name", Nothing, "tbdataset")
writer.WriteStartElement("Query")
writer.WriteElementString("DataSourceName", Nothing, "tbdata")
'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
writer.WriteElementString("CommandText", Nothing, "TableDirect")
writer.WriteEndElement() ' Query'Fields
writer.WriteStartElement("Fields")
ForEach fieldName In m_fields
writer.WriteStartElement("Field")
writer.WriteAttributeString("Name", Nothing, fieldName)
writer.WriteElementString("DataField", fieldName)
writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
writer.WriteEndElement() ' FieldNext
writer.WriteEndElement() ' Fields' rd datasetinfo
writer.WriteEndElement() ' DataSet
writer.WriteEndElement() ' DataSets
writer.WriteEndElement() ' Report' Flush the writer and close the stream
writer.Flush()
stream.Close()
'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
Dim ms AsNewMemoryStream(myByteArray)
'Supply Stream to ReportViewer
ReportViewer1.LocalReport.LoadReportDefinition(ms)
ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races -
Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SGIs this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway -
ERROR ODI-40837: An error occurred during the creation of the schema
Hi I am trying to test an xml file server and keep getting the following error.
ERROR ODI-40837: An error occurred during the creation of the schema: ODI-40738: A SAXException was caught while reading the model saying: Expected 'DOCTYPE'.
JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml&ro=true&DOD=YES
anybody could help as i dont find any blog or documentation about this error?.
Thanks
Edited by: user626688 on May 31, 2013 1:26 PMThere seems to be some problem with your xml file. Please work with support channel to investigate this issue.
You can also check the xml driver parameters details at http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH
Maybe you are looking for
-
Will the Nano 7 work with bluetooth on my truck?
Got the new Nano7 for the holidays; having trouble getting it linked to the bluetooth in my vehicle (2010 GMC PU). Any ideas? GMC was no help.
-
Hi experts, I have encountered some problem in declaring an event type as a map. For some reason, when I use the sample provided by oracle: <wlevs:event-type type-name="AnotherEvent"> *<wlevs:property>* <-- this requires a name but since I am using a
-
Hello, I am working on the ESS Cats Webdynpro for Java Application wherein the Data Entry Section of the Cats Table has the 'Total' Sum column which has 3 0's after the decimal rather than 2.....I found the ListViewerSlim.java file where the table is
-
Where can I find a sql server 2000 driver which supports JDBC 2.0?
Where can I find a sql server 2000 driver which supports JDBC 2.0? Thanks! Paul.
-
Hi Guys, I have the below mentioned data that I want to represent in a single stacked bar chart. Dept Name No. of Managers A 5 B 2 C