Error occurs when I open the tasks list in MS Project Professional 2013 from SharePoint 2013

Hi,
I have created a SharePoint 2010 workflow for a tasks list that updates a list item column if the Date Complete <= Today's date & Percentage Complete = 100%
I used 'Set Field in Current Item' in the workflow & the values are updated in the list for the current item.
However, when I open the tasks list in MS Project Professional 2013 from SharePoint 2013, then I get a error "We can't write task - taskname to the SharePoint site. This is either because tasks list is in read only mode or because this task has a column
that requires unique value."
If I remove the 'Set Field in Current Item' in the workflow, then the error does not occur. However, the 'Set Field in Current Item' in the workflow is required.
Please provide solution to this issue ASAP. Your reply will be greatly appreciated.
Thanks in advance

Hi Jack,
A shot in the dark here. I'm not convinced the error is from the workflow. What is the definition of the list item column in SharePoint? Have you set the column to requiring a unique vale? Look at the column definition.

Similar Messages

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

Error occurs when applying pre-install task of patch 9239089

Error occurs when applying pre-install task of patch 9239089
----------------------------------Pre-install Tasks--------------------------------------
4. Use SQL*Plus to run the script:
UNIX:
$ sqlplus /nolog
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name>
----------------------------------error message---------------------------------------
End of Creating PL/SQL Package AD_DBMS_METADATA.
DECLARE
ERROR at line 1:
ORA-20000: ORA-00933: SQL command not properly endedError in
ad_grants.Give_grants
ORA-06512: at line 685
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Thanks,
Jackie

Jackie,
$ sqlplus /nolog
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name> You need to run the script as follows (replace <APPS schema name> with apps):
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql appsThanks,
Hussein

An error occurred when connecting to the accounting system ID3DEV310

Hi Friends,
We are Implementing collaboration project 4.5 and want to link with project system in ECC 6.0. Both these are in the different servers.
I have done the configuration on both the servers and also maintain the RFC (ID3DEV310) in Object Links.
When I create or open the existing project I get the following error: "An error occurred when connecting to the accounting system ID3DEV310"
Costing Variant taken is PS01 (Project Planning).
Your reply would be highly appreciated.
Aryan

Hi Deepak,
I have assigned the RFC destination and web server to the object type: "0WBSELEMENT" only
Also the same has been done for define Object links for accounting integration "0FIN_INT_ERP_PS"
I have entered these specific to PS objects only.
Aryan

PARSE_APPLICATION_DATA Error during XML = ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789

Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
Ravi

Hello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi.

The firefox page comes up when i open the browzer. How do I keep this from happening??

The Firefox page comes up when i open the browser. How do I keep this from happening??

Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
For more on this:
http://www.thesafemac.com/eliminating-browser-redirects-and-advertisements/

I can't open the downloaded evaluation copy of Project Professional 2013. Asks me what program I want to use to open the file.

I can't open the downloaded evaluation copy of Project Professional 2013. Asks me what program I want to use to open the file.

I think you have downloaded .img file. If you want to install that program follow the given instruction.
download open source magic disc viewer software.
http://www.magiciso.com/tutorials/miso-magicdisc-overview.htm
After installation, right click on notification icon of magic disc, click Virtual CD/DVD ROM -> No Media -> Mount,
Select disc image file of project professional 2013.img.
Open My Computer -> select mount drive and install that program.

Taking exactly 10 min to open the task list using smartview

Hi All,
We are using hyperion smartview 11.1.2.2
when I connect to hyperion planning task list using smartview it is taking exactly 10 min to open the task but the same is taking only 3 seconds in our Production environment. Can someone help me out.
I have also followed the below but it did not help me out.
It might be that APS is timing out, I assume you are running OHS
if so stop OHS, go to <MIDDLEWARE_HOME>\user_projects\<instance_name>\httpConfig\ohs\config\OHS\ohs_component
edit mod_wl_ohs.conf
In there you will see something like
< LocationMatch ^/aps>
SetHandler weblogic-handler
WeblogicCluster <APS_SERVER>:13080
< /LocationMatch>
add
WLIOTimeoutSecs 3600
so it looks like
< LocationMatch ^/aps>
SetHandler weblogic-handler
WeblogicCluster <APS_SERVER>:13080
WLIOTimeoutSecs 3600
< /LocationMatch>
Save, start OHS and try again.
Below is our planning0.log
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE =   CONTEXTID = 0000K2RgbvYCsl95nfp2iZ1I4pUX00000x TIMESTAMP = 1377001701090
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
####<Aug 20, 2013 8:28:21 AM EDT> <Warning> <HTTP> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000K2RgbvYCsl95nfp2iZ1I4pUX00000x> <1377001701106> <BEA-101138> <ServletContext@30584151[app:PLANNING module:HyperionPlanning path:/HyperionPlanning spec-version:2.5 version:11.1.2.0] One of the getParameter family of methods called after reading from the ServletInputStream. Not merging post parameters.>
####<Aug 20, 2013 8:28:21 AM EDT> <Info> <WorkManager> <AMIWSP01> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000K2RgbvYCsl95nfp2iZ1I4pUX00000x> <1377001701106> <BEA-002936> <maximum thread constraint WatchManagerEvents is reached>
####<Aug 20, 2013 8:28:22 AM EDT> <Alert> <Diagnostics> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Tue Aug 20 08:28:21 EDT 2013)> <<WLS Kernel>> <> <> <1377001702028> <BEA-320016> <Creating diagnostic image in C:\Oracle\Middleware\user_projects\domains\AMIHYPRD\servers\Planning0\adr\diag\ofm\amihyprd\planning0\incident\incdir_69426 with a lockout minute period of 1.>
####<Aug 20, 2013 8:39:11 AM EDT> <Error> <WebLogicServer> <Planning0> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1377002351544> <BEA-000337> <[STUCK] ExecuteThread: '28' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "635" seconds working on the request "Workmanager: default, Version: 0, Scheduled=true, Started=true, Started time: 635907 ms
POST /HyperionPlanning/SmartView HTTP/1.1
Accept: */*
Accept-Language: en-US
Accept-Encoding: gzip
ORA_EPM_SVCLIENT_CLIENTIP: 10.101.6.194
ORA_EPM_SVCLIENT_EXTENSIONS: b78f60ca-e18b-401d-a10f-626c0118daf2;AF52322C-D60B-41f1-A8C8-0C299FBB0AA4
Content-Encoding: gzip
User-Agent: HttpApp/1.0
Content-Length: 212
Cache-Control: no-cache
Cookie: JSESSIONID=DtdJSTgFpg67nJ2wvxKncMtlvKFJvZn9Q5Ljj0y4t5nZGkDRbsvN!165491247; ORA_EPMWS_User=admin; ORA_EPMWS_AccessibilityMode=false; ORA_EPMWS_ThemeSelection=BpmTadpole
Connection: Keep-Alive
X-Forwarded-For: 10.101.6.194
Proxy-Client-IP: 10.101.6.194
X-WebLogic-KeepAliveSecs: 30
X-WebLogic-Force-JVMID: 165491247
]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-203 "[STUCK] ExecuteThread: '28' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
    com.hyperion.planning.olap.HspEssbaseMainAPI.EssGetCalcList(HspEssbaseMainAPI.java:???)
    com.hyperion.planning.olap.HspEssConnection.essGetCalcList(HspEssConnection.java:306)

In order to diagnose your problem you will need to download and install the below
Try clicking the tap problematic apps while the trace is running
Install the WPT (windows Performance Toolkit)
http://www.microsoft.com/en-us/download/details.aspx?id=30652
Help with installation (if needed) is here
When you have, open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following:
First level triage, CPU usage, Disk IO.
If your problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry) Please configure yours as per the below snip
Click Start
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called)
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

I have created a movie of vacation pictures on my windows movie maker (vista op system). When I open the timeline, select audio, and drag a tune from i-tunes, windows movie maker shuts down and no song is transferred. Are these systems incompatible

I have created a movie of vacation pictures on my windows movie maker. ( Windows vista) When I open the timeline, click on audio, and drag a song from itunes, windows movie maker shuts down, and the song is not transferred. Are these systems incompatible? Can I upload the movie to I tunes somehow and then add the music tracks? Thank you...

You may need to convert the file to mp3
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/HT1550
Correction, I was able to add m4a files to Windows Live movie maker in windows 7, but not sure about your version
Message was edited by: polydorus

Error Occur when trying to select Item List

Hi Experts,
Machine gets Hang when trying to select Item List in row level PO,SO ect as well as in item master Data when Pressing Star ( * ) .
and when trying to close this window then error occur as close the program and problem occur on server itself
Test Database is working fine.
worked around
1.Restarted the machine
2.Restarted services
using SBO 9.0 PL 7
OS-Window 7 Professional
Please Find the Two Error Attachments
Please help me
Thanks & Regards
Navnath

Hi
Check the below thread
SAPB1 Application Hang and Not responding when i serch item in any document
With Regards
Balaji Sampath

Help! SAP-LSO - LSO-AE "A Read-Write Error Occurred when checking in the Object"

Using version 14 of LSO-AE
WBT publishes fine
Error occurs during check-in to Master Repository
It seems to be a 3rd party WBT created by the NTSB, so I only have the SCORM 1.2 package, no source files unfortunately.
Thanks in advance for any advice that is offered!

Figured it out. Not that this forum helped! But here is the answer should anyone else have a similar problem on check-in. The standard setting for the LSO Repository is 100MB. Trying to check in anything larger than this, caused the above error. Increasing the configuration setting fixed the issue and allowed successful course check in without the above error.

An error occur when i delete the pointer memcache_get( ) returned (use libmemcached.dll in windows)

hi, every one, I meet a problem when I test the libmemcached in windows platform, the code I use is a example from internet.
but I move memcache_get() to a while cyclic, like this:
while(1)
char* result = memcached_get(memc,key.c_str(),key_length,&value_length,&flags,&rc);
if( MEMCACHED_SUCCESS != rc)
  printf("memcached_get fail [%d] [%s]\n", rc, memcached_strerror( memc, rc ));
  return -1;
       printf("memcached_get success [%d] [%s]\n", rc, result);
when I run this program, there will be a quick memory leak under both linux and windows platform, so I add a delete after print the result:
delete result,result=NULL;
this solve the memory leak under linux , but the program crash under windows in the delete sentence.
I don't known if it is because I use it in wrong way, I'll appreciate if you gave an advance or explain why this happened.

Hi,
Please refer to http://libmemcached.org/libMemcached.html for more information about libMemcached, you can get source code and document from that link, since this forum is discussing the issue
of azure, if this issue don't relate to azure, I suggest you post it to the
appropriate forum for a better help.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The below error occurs when are opening group policy management editor kindly suggest me what to do

Problem signature:
Problem Event Name:                        APPCRASH
Application Name:
mmc.exe
Application Version:
6.3.9600.16384
Application Timestamp:                     5215ef8f
Fault Module Name:
jscript9.dll
Fault Module Version:                        11.0.9600.17031
Fault Module Timestamp:                  530882eb
Exception Code:
c0000096
Exception Offset:
0000000000075a36
OS Version:
6.3.9600.2.0.0.272.7
Locale ID:
1033
Additional Information 1:                  ec0f
Additional Information 2:                  ec0f4898764fec44122dfe96fc36b0dc
Additional Information 3:                  4f6d
Additional Information 4: 4f6db505997e7dc082983dd077416716

Hi,
Would you please let me know edition information of the server where this issue occurred? Was it SBS 2011? Did
you remember which operation you had done before this issue occurred? For examples, install updates or third-party applications or any other?
On current situation, please run
sfc /scannow command to scan all protected system files and monitor the result. Please also check if all necessary Windows Updates were installed.
By the way, did you encounter any issue when open and use IE?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Got "Unknown error occured" when access to the Approval page in Project Server 2013

So long time find the solution, but cn't. Pls. help me

Hi,
Let's verify the following:
Whether the issue exists in all of the users? Done a test with a user with full control permission, compare the results.
What is the current SP\CU version installed on Server? deploy the latest CU, compare the results.
Whether the issue exists in other browsers, done a test in another browser, compare the results.
Whether all resources experiencing this error.
"An Unknown Error has occurred" is a generic error message. Please check ULS log for more detail information about the issue.
In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

When I Open the Acrobat XI I just purchased as download from Academic Superstore I get and error message that the serial number is invalid.

Is there something special I need to do when installing adobe Acrobat XI on my mac. I am getting an error that the serial number is wrong but I am entering the serial number provided be indent-e.com? anyone have any ideas?

Hi memegaines,
Are you still facing this issue?
Send me the serial number you are using via private message option: https://forums.adobe.com/thread/1184148
Also attach the screen shot of the error message, you must remove serial number from screen shot while you reply.
Regards,
Ajlan Huda.

Error occurs when I open the tasks list in MS Project Professional 2013 from SharePoint 2013

Similar Messages

Maybe you are looking for