"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Similar Messages

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

Error occurred when view the data from physical layer

Hi ,
I have created system DSN like "demo1" for excel file. After that i import the excel file into administration tool.
after that i want to view the data from physical layer. At that time ,I am getting following error .
Please resolve this issue.
Thanks in advance,

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

Raw Read Error Rate, Errors occurred while reading raw data from a disk

hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
Mohammad

Hello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Can i load transactional Data from ge DS without having load M Data before

Hello,
I want to load transactional data from a generic data source.
I just want to know whether it would be successful, after the master data of 0material i load in the PSA couldn't be loaded in the infoObject (000000XXXXXXX -> material number error) by the DTP (see Thread BI - BI general - User arnaud).
If i can load the transactional data without having loaded the master data in the info Object, is it possible that it loads also the master data simultaneous.
Thank you very much for helping
AR.

Loading transactions before master data can result in data elements not being populated in the InfoProvider in some cases, hence the "Best Practice" recommendation to load master data first.
For example, if you have update/transformation rules that go read master data to get additional data to enhance the transactional data, or you map master data attributes during the transaction load, the master data attributes could be missing values if you don't load master data first.

Problem in loading transactional data from to 0MKT_DSO1(ods) to 0MKTG_C01

Hi,
I am trying to load lead transaction data to the standard Crm lead management cube from ODS.There is a problem while loading transaction data from 0MKT_DSO1(ods) to the infocube 0MKTG_C01 as the field 0STATECSYS2(CRM STATUS) is set to 10 in ods -meaning incorrect transaction. This feild is not there in the infocube.
There is a routine in the cube that deletes data records with (0statecsys2) set to 10.
THIS field is not coming in the transaction.
so, where can i see the master data in crm source system? and why is that feild getting set to 10 ?
thanks in advance!

Thanks for the reply..
I have checked the Fact table which shows
1. packet Dimension
2. Time dimension
3. Unit dimension.
I have kept the 0CALDAY as the time characteristics.
Sample data i have loaded from ODS to Cube.
Sample data in ODS.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
I have loaded this data in Cube with Full Upload.
Data in Cube.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
Again i am loading the same data to cube
Data in cube after loading.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
800001___________12/02/2009____15
The data is duplicated and it is not cumulating.
Am i missing anything on this.
Pls help..
Thanks,
Siva.

BPC 7.5 NW: Loading transaction data from infocube

Hello, I am trying to load transaction data from an infocube into a BPC application using a package based on /CPMB/LOAD_INFOPROVIDER.
The master data (cost center and cost element) are already loaded. As they are compounded, we have added in the key the CO area (eg ID=0CO_AREA+ID)
I am facing an issue that the system ads leading 0 in front of the values of those master data comming from the cube.
So the data looks like CO_AREA00000000000cost_center.
As the data where correctly loaded in the dimensions (CO_AREAcost_center), the loading fails.
How can we remove those 'O'?
Thanks!

Hi Anton,
We use this in most of our projects; since auditing is one of the important requirements.
You should enable the auditing for selective categories only. With each transaction data entered, it will keep a log, which can increase the size a lot, and hence impacting the performance.
If you are enabling the log, you should frequently purge the audit data as well. However, you should take a backup of this and then purge it.
Hope this helps.

Load transaction data from R3 (FI, CO, HR, MM...) to BPC 10 directly

Hi everyone,
Anyone know if is it possible to load transaction data from ECC (FI, CO, HR, MM...) to BPC 10 directly? There is a documment titled "How to Implement Delta Loading of Transaction Data from ECC and BW 7.3 into BPC using Delta Initialization in BPC 10NW" but only refers to load data from BW.
Thanks&Regards,
Fernando.

Hi Fernando,
BPC NW 10.0 has DM packages that allow load of Master and Transaction data directly from ECC system, but it's very limited. I.e. just a couple extractors are supported right now.
Regards,
Gersh

Error while loading transaction data from an Infoprovider Mapping C_ACCT

Hi Gurus,
We are implementing BPC Consolidation for NetWeaver 7.5, and we're facing the following situation:
We have loaded master data from 0RC_ACCOUNT (group account) to our dimension C_ACCT without a problem, but when we run the loading package from an infoprovider 0FIGL_C10 (Transactional Data), the following error message appear:
Dimension: Member C_ACCT: 000 not valid
We already check data in source InfoProvider and there's no record with 000 account value.
Any suggestions?
Thanks in advance
Best Regards
Abraham Méndez

Rad,
See if SAP note# 492647 & 849501 is of some help in your scenario.

BPC:NW - Best practices to load Transaction data from ECC to BW

I have a very basic question for loading GL transaction data into BPC for variety of purposes, would be great if you can point me towards best practices/standard ways of making such interfaces.
1. For Planning
When we are doing the planning for cost center expenses and need to make variance reports against the budgets, what would be the source Infocube/DSO for loading the data from ECC via BW, if the application is -
YTD entry mode:
Periodic entry mode:
What difference it makes to use 0FI_GL_12 data source or using 0FIGL_C10 cube or 0FLGL_O14 or 0FIGL_D40 DSOs.
Based on the data entry mode of planning application, what is the best way to make use of 0balance or debit_credit key figures on the BI side.
2. For consolidation:
Since we need to have trading partner, what are the best practices for loading the actual data from ECC.
What are the typical mappings to be maintained for movement type with flow dimensions.
I have seen multiple threads with different responses but I am looking for the best practices and what scenarios you are using to load such transactions from OLTP system. I will really appreciate if you can provide some functional insight in such scenarios.
Thanks in advance.
-SM

For - planning , please take a look at SAP Extended Financial Planning rapid-deployment solution: G/L Financial Planning module. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is free to licensed customers of SAP BPC. This RDS leverages the 0FIGL_C10 cube mentioned above.
https://service.sap.com/public/rds-epm-planning
For consolidation, please take a look at SAP Financial Close & Disclosure Management rapid-deployment solution. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is also free to licensed customers of SAP BPC.
https://service.sap.com/public/rds-epm-fcdm
Note: You will require an SAP ServiceMarketplace ID (S-ID) to download the underlying SAP RDS content and documentation.
The documentation of RDS will discuss the how/why of best practice integration. You can also contact me direct at [email protected] for consultation.
We are also in the process of rolling out the updated 2015 free training on these two RDS. Please register at this link and you will be sent an invite.
https://www.surveymonkey.com/s/878J92K
If the link is inactive at some point after this post, please contact [email protected]

An error occurs when trying to exit from ALV report

Hi,
I have a report which imports and display in ALV data from an excel file. Unfortunately when I'm trying to exit I receive an error as I copied below.
Runtime Errors         MOVE_TO_LIT_NOTALLOWED_NODATA
Date and Time          17.10.2008 08:39:18
Short text
     Error at assignment: Overwritten protected field.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because it
      has
     come across a statement that unfortunately cannot be executed.
Error analysis
     A new value is to be assigned to the field "<L_BOX>", although this field is
     entirely or partly protected against changes.
     The following are protected against changes:
     - Character literals or numeric literals
     - Constants (CONSTANTS)
     - Parameters of the category IMPORTING REFERENCE for functions and
     methods
     - Untyped field symbols not yet assigned a field using ASSIGN
     - TABLES parameters if the actual parameter is protected against changes
     - USING reference parameters and CHANGING parameters for FORMs, if the
     actual parameter is protected against changes and
     - Accesses using field symbols if the field assigned using ASSIGN is
     protected (or partially protected, e.g. key components of an internal
     table with the type SORTED or HASHED TABLE) against changes
     - Accesses using references, if the field bound to the reference is
     protected (or partially protected) against changes
     - External write accesses to READ-ONLY attributes,
     - Content of a shared object area instance accessed using a shared lock
     (ATTACH_FOR_READ).
Trigger Location of Runtime Error
     Program                                 SAPLSLVC_FULLSCREEN
     Include                                 LSLVC_FULLSCREENF02
     Row                                     686
     Module type                             (FORM)
     Module Name                             MARKS_SAVE
How can I solve the problem ?
Thanks
Stefan

Hi ,
Please check the GUI status you are using for the ALV.
Looking at the code what i feel is that the error occurs when the user action is the code &SAL' or '&ALL'.
Please put a break point at the statement and see why is the error occurring
Regards,
Arun

Load transaction data from ECC to BPC 10.1 using US GAAP starter kit SP3

I need to understand a bit more the process to load transactional data into BPC 10.1. We have US GAAP Starter Kit SP 3. Below is an screenshot from the config guide:
It explains how transactional data can be extracted from ECC system to the SAP Netweaver BW data source 0FI_GL_10 and then transform it
to get it loaded into BPC. The Objects /PKG/FC_C01 and PKG/FC_DS01 are just mentioned here as reference because they come in the RDS for Financial Close and Disclosure Management, which not all companies have.
I believe the upwards data flow should be from Data Source 0FI_GL_10 to Data Store Object 0FIGL_O10 and then to InfoCube 0FIGL_R10. There is also a data flow that goes from 0FI_FL_10 to InfoCube 0FIGL_R10. Can anyone with experience with US GAAP starter kit answer this?
Thank you.

Hello, we were able to load actuals to our environment with the US GAAP Starter Kit, SP03. I followed the Operating Guide document up to section 5.2 and ran the Consolidation Data Manager Package with no issue. We are using the A20 Input and A20 Consolidation process flows based on flows F00, F10, F20, F30, F99, etc... According to the documentation, the Statemnet of Cash Flow and Changes in Equity should be automatically calculated and available from the changes
in Balance Sheet accounts once Consolidation is completed . However, when I ran the corresponding reports, they bring no data.
We loaded actual data for the whole 2013 and Jan 2014. Our intention is
to run the first consolidation for Jan 2014. The closing balance for period 12.2013 in flow 99 was copied to flow 00 2014 (opening balance). Flows 20 and 30 were updated with the corresponding balance sheet movements (increase/decrease), according to the delivered controls in the starter kit. However, cash flow is still showing no results.
I found the following text in the operating guide, but I am not clear if I am missing a step. Can you please clarify? This is telling me that I need to copy my 01.2014 opening balance (F00) to 12.2013 closing balance (F99, which is done by the copy opening data manager package, but in the opposite direction, from Y-1 F00 to Y F99) and in addition to also copy that balance to 12.2013 F00 (previous year opening balance)??
"5.2.2 First Consolidation
When operating the consolidation for a given Scope for the first time in the application, it is necessary to populate and process the prior year-end time period for this Scope, in addition to the first required consolidation period. This is because the flows dedicated to the scope change analysis are properly populated by the consolidation engine provided that at least one automatic journal entry has been detected in the consolidation used as opening consolidation, which by default is the prior year end (December, Y-1). To accomplish this, it is recommended that you copy all input-level opening data of the first required consolidation (flow “F00”) into the closing data (“F99”) and opening data (“F00”) of the prior year-end time period, including intercompany breakdowns.
This breakdown by intercompany in the balance sheet triggers automatic eliminations, which are carried over to the closing position. After the consolidation process, the closing data of the prior year
end time period will contain the appropriate source data for the opening data of the following consolidation, notably the opening automatic journal entries.

"Error occurs when loading transaction data from other model" - BW loading into BPC

Similar Messages

Maybe you are looking for