Error occurs while changing Depreciation key
hi,experts
I changed the depreciation key to MANU and did some Manual Depreciation. now I want to change the depreciation key back and let it do automatic depreciation But while I was doing that via AS02, an error occured
*E 633 Manual depreciation not allowed with depreciation key ***.
Can you please provide some help if you can.
thanks a lot.
Hi Experts.
I have the similar isue .
I changed the depreciation key to MANU and did some Manual Depreciation. now I want to change the depreciation key back and let it do automatic depreciation But while I was doing that via AS02, an error occured
*E 633 Manual depreciation not allowed with depreciation key ***.
Can some one provide advice on this please .
Thanks
Ravi.
Similar Messages
-
Error occured while doing depreciation for an asset
Hi,
I could running the depreciation for an asset in AFAB t-code.
The msg is ""Testrun Completed successfully" and "No document were created for this run". I have purchased the asset for the month of April and wanted to run the depreciation for that month.
Please Advice.
Thanks
BnoyDear Bnoy,
If you look at the message itself saying Testrun completed successfully. So mean you are runnning depreciation posting program in TEST RUN mode, so it is understood not to post any document in system in real time and if any error occurs must show in simulation mode.
If you dont found any error in TEST RUN, next running time remove TEST RUN and execute the same again, here at this time system will post the document and asset explorer will get updated with posted values.
I hope this will help you to understand depreciation posting functionality, and you will be able to overcome the facing issue.
If you have any doubts feel free to share, you are welcome !
Regards,
Pankaj A Bhalerao. -
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
-
ORA-00607: Internal error occurred while making a change to a data block
hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start databaseDuh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC -
An error occurred while attempting to change modules
I installed Lightroom and when starting the program I get, "An error occurred while attempting to change modules." I get this message within the program when clicking on any of the top right menu items. Also, importing a photo is not listed in the file menu. I deleted the preference file and Lightroom folder in my user preference and reinstalled. I tried many reinstalls, it still has reoccurring error message. Anyone now a fix? I'm running 10.5 on a Core Duo with 2meg of RAM on a 320 gig hard drive with lots of room.
For what it is worth, I was unable to change to the Web and Print modules, and I was also unable to record new presets (though I had successfully done it many times before) though I could still use already created ones. I was baffled, but found a workaround using hints from this and other forums. Much thanks to those who provided me with a starting point as I never would have figured this out on my own.
My wife is a separate user on the same computer, and I tried switching our catalogues and preference files, ... nada. Looking at her folder structure under user/library/application support/adobe/lightroom, she had folders for Web Templates, Web Galleries, and Print Templates but I didn't. So, simply copying her folders (not creating new ones of the same name, which may still have worked) into my own lightroom directory worked.
Where I screwed up initially was tryiong to use my own presets under her install of lightroom and then creating new ones (which worked) but then trying to import them back into mine. I had the new presets working under my own install, but still couldn't create new ones under my own setup. Finally, I realized that it was the "Develop Presets" folder under my own install that was in some way corrupted and copied her Develop Presets folder into my own install and every thing was fixed. I could even copy the subfolders from my own Develop Presets folder directly back in without issue.
Hope this helps someone. -
An error occurred while attempting to change modules while starting up LR 4.1. New install on a new MBP first time trying to start up
Just a guess, but since everything is new, perhaps you have some sort of permissions problem.
Make sure your user has write access to all the locations mentioned in this link:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
Hal -
"an error occurred while attempting to change modules" when launching lightroom
I get the message "an error occurred while attempting to change modules" when I launch the app on my mac.
Every other adobe app works like Photoshop
I have followed all the troubling shooting steps in the link below, not one of them makes anything different. Except I tried the last one. I created a new account, simply logged in and launched the app and everything ran normally. No problem. However it doesn't say what to do if that works it just says try it.
Error changing modules | Lightroom
Obviously this means its going to be an issue with a support file in the one user account but what one?
I also can't un install lightroom either, when I go to the creative cloud plug in on my menu bar the uninstall says its unavailable but the others are fine.
Any ideas?I just found the answer for me.
I did step 5 on this support article:
Troubleshoot unexpected behavior | User account-specific | Adobe software | Mac OS
It is to repair the permissions on the hidden Library folders. -
Just tried to import a new CD into my iTunes music library, but get this error code "error occurred while converting file. You do not have the privilege to make changes"....any thoughts? Have not tried to change anything- only import CD ??
Do you have read& write permissions to your iTunes library?
See this thread: Re: "Error has occurred... You do not have the privilege to make changes." -
in Itunes 10.7.3 I get a message: error occurred while converting file. You do not have the privilege to make changes. This just started and I can not import my cds. Any thoughts?
Do you have read& write permissions to your iTunes library?
See this thread: Re: "Error has occurred... You do not have the privilege to make changes." -
Installed CC trial and opened LR, panels on left and right not appearing. keep getting an error message "an error occured while attempting to change modules" plus no import/export options.
Error changing modules | Lightroom
Mylenium -
Despite it is claimed in Adobe forum that Lightroom is fully compatible with OS Maverics on my MacBook Air IT IS NOT. A message "an error occurred while attempting to change modules" appears every time I try to open Lightroom. This happened immediately after upgrading to Mavericks. On my doughter's same machine Lightroom works perfectly. Can anyone help?
Surely the Adobe forums are the place for help with Adobe applications. The fact that the problem doesn't occur on your daughter's machine suggests that it's not an issue with Mavericks but a local problem on your own machine.
-
I installed Lightroom 5.6 (full version, not trial) on Mac, when starting I receive an error message "An error occurred while attempting to change modules".
I tried removing it and reinstalling but the same error comes up.
Anybody have any recommendations?A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020 -
"Error occured while converting the file. You do not have the privilege to make changes. 27" iMac 2013 late model
Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cds?
Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
Error occurs while activating a 'Write Optimized' DSO.
I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSOHi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth
Maybe you are looking for
-
I'm in a Hampton Inn trying to connect my apple tv to the wifi. Apple TV recognizes and says it's connected but doesn't ask for the password and is not actually connected because it can't download Itunes. How can I get the Apple TV to ask for a pas
-
The mechanism of Delete Row and Unto in program BCALV_GRID_EDIT
Hi Experts, Users need to Delete/Insert/Change a row in OO ALV report and the row can be Undo when the undo button is press. I find the example program in my system and finally get a program BCALV_GRID_EDIT. Most functions in this program meet m
-
Maintaining a hyperlink bookmark to another document
Hello, I have a word document that contains hyperlinks to a bookmarked location in a different word document (2007). The hyperlinked bookmark works great when in word. Opens up the 2nd document and goes straight to the bookmarked location. Once I
-
I have a QNAP-NAS server in a local network through ethernet and airport with afp. When I try to connect to it, for some reason the connection is not made and the 'wheel' in the lower right corner of the finder window will turn endlessly. The connect
-
HAI, WHICH IS THE DEMO OR EXAMPLE PROGRAM FOR SAP SCRIPT IN SAP THANK YOU