Error occurs while generating the Query

Hi Experts,
When I am trying to generate the Query, an error message is displayed as ' Error in generated report (Selection screen is too large) '.
Query is develoed using Quick list viewer.
Need ur assistance to overcome the Error.

hi,
Try to remove some fields from selection screen as well as output and check.

Similar Messages

No Data Shown because an error occurred while running the query

Discoverer 10gR2 using Plus on Firefox:
I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
All parameters except the extra "Model" are shared between the sheets.
When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
Booooo.
Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
Has any body run into this behavior? Is there an answer?
-- Ron Olcott, Business Intelligence Product Manager

What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
John DIckey

Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3

Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.

Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server

Hi Team,
Greetings of the Day!!!!!
I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
An error occurred while preparing the query "..........."
Please help me to resolve this issue.
Regards,
Brijendra Pandey

Hi Fanny,
I had reviewed the job history. I am getting below message where as table is exist in the database.
Message
Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE
DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE DB provider "MSDASQL" for linked
server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412). The step succeeded.
Regards,
Brijendra Pandey

Error when creating SharePoint WebPart - "An error occurred while generating the project"

I am getting a Error in Visual Studio when I create a SharePoint Web Part.. "An error occurred while generating the project. Please see the Visual Studio Output window for more information."
I have checked the Output window and there is noting in it. When I click OK I get the next error that states "Object reference not set to an instance of an object".
After I click oky.. There seems to be files missing in the project menu..
I am using Visual Studio 2013 Ultimate and SharePoint 2013 Enterprise. These run on Windows Server 2012 R2..
This mind boggling.. Hope someone can help me..
Thanks

Hi,
For better troubleshooting, I suggest you do as the followings:
Create a new clean project. In this projcect, you can just create a new web part to check whehter it works.
Debug the project step by step and try to find which object reference not set to an instance of an object.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

An error occured while generating a new report template

I have installed the Crystal Reports 2008 V2 and also the support pack. Installed the SAP Integration Kit XI 3.1 and the latest service pack 2.7. When I try to use the SAP Tool bar from Crystal Report , I can connect/see the queries but when I select any query to create a report I am getting an error message
"An error occured while generating a new report template". Any advise ? How do I turn on the trace in the client ?
Thanks,

Hi,
Did you update your Fix Pack...
Here is solution for Client...
To turn tracing on for client applications, you can use the following steps:
1. Click Start > Settings > Control Panel > System > Advanced > Environment Variables button.
2. Under the User Variables, add the following variable and value:
For Enterprise XI:
Variable Name: BOE_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logs
For Crystal Analysis, Crystal Enterprise, and Crystal Reports version 10 and earlier:
Variable Name: CRYSTAL_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logging
Regards,
Bashir Awan

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

An error occurred while preparing the installation. Try running the application again

I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
      "Kernel Cache" = "/.IABootFiles/kernelcache";
      "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!

Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck.

Workflow Activity "Lookup Value" returns An error occured while enumerating the filter using [//WorkflowData/customvalue]

I want to generate an Accountname using EmployeeID, FirstName and LastName via a workflow.
I'm using the Granfeldt Workflow Activity Library (https://fimactivitylibrary.codeplex.com/)
I'm using the FIM Powershell Workflow Activity (https://fimpowershellwf.codeplex.com/)
Steps:
Passing the EmployeeID, FirstName and LastName to the powershell Activity, generating a logonid based on logic.
Add-PSSnapin FIMAutomation
$EmployeeID = $fimwf.WorkflowDictionary.EmployeeID
$Forename = $fimwf.WorkflowDictionary.Firstname
$Lastname = $fimwf.WorkflowDictionary.Lastname
'logic creating a custom logonid here
==> This works
Returning data back to the workflow via that powershell script:
$fimwf.WorkflowDictionary.Add('NewAccountName',$newlogonid)
==> This works
Using Lookup Value Activity to read the Workflow data and update the [//Target/AccountName] fails.
This gives an error:
An error occurred while enumerating the filter 'string' .
(where string is the actual generated userid that I've got back from the powershell script. Example dab2563)
I tried with only [//WorkflowData], then this gives the error:
Index was outside the bounds of the array.
Any hints to solve this?
Kind regards,
David

The Lookup Activity is for looking up an object in the FIM Service. Seems like thats not what you're trying to accomplish.
For updating the target of the workflow, just use the built-in Function Evaluator. The Lookup WF was not built for that and it is failing because you have not specified a valid XPAth lookup filter, such as /Person[AccountName='BillG']
Regards, Soren Granfeldt
blog is at http://blog.goverco.com | facebook https://www.facebook.com/TheIdentityManagementExplorer | twitter at https://twitter.com/#!/MrGranfeldt

Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

VLD-0917: An unknown error occured while generating FACT

I'm trying to move my OWB repository from machine_1 to machine_2 this is what I did:
1. Export of the OWB metadata for the entire project. (machine_1)
2. Import of the OWB project in machine_2, import is successfull.
3. Configure locations for the source/target schemas (double, triple checked)
4. deploy the objects...
Here comes the problem: all tables referencing shared tables from other locations (i.e. modules), fail to generate with error
VLD-0917: An unknown error occured while generating FACT.
An unknown error occurred while generating FACT.
Error details: java.lang.NullPointerException.
following is the Design Center client log for the error:
**** Exception when generating ****
java.lang.NullPointerException
at oracle.wh.repos.sdk.environment.WBEnvironmentHelper.getDbLinkName(WBEnvironmentHelper.java:775)
at oracle.wh.service.impl.generation.common.WBGenerationUtils.isSameInstance(WBGenerationUtils.java:355)
at oracle.wh.service.impl.generation.ddl.TableGenerator.getMapSchemaName(TableGenerator.java:914)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKey(TableGenerator.java:1047)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKeys(TableGenerator.java:894)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generatePhysical(TableGenerator.java:612)
at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:463)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generate(TableGenerator.java:145)
at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:306)
at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generateAUX(DDLGeneratorManager.java:186)
at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generate(DDLGeneratorManager.java:101)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:423)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Even more, this happens when I create a new FACT and a new shared table (located in another location) so it isn't the repository metadata being imported. If I remove the constrainsts referencing tables in other schemas then deployment is successfull.
Repository resides in an oracle database 10g r2 and OWB is 10.2.0.3 running on a cluster machine with AIX 5...
Any ideas how to solve this or a possible workaround?
Thanks,
German

Hi,
I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
Any idea what might be happening here?
Best Regards,
--oswaldo.
[osantos]

VLD-0917 - unknown error occured while generating (OWB10R2)

I have two cubes which I'm trying to drop via the control center, so that I might add a new version with a new dimension. However, when I try deploying the drop, I get the "VLD-0917 - unknown error occured while generating <cubename>" together with:
An unknown error occurred while generating <cubename>. Error details: java.lang.NullPointerException.
Any ideas?
ed

Hi,
I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
Any idea what might be happening here?
Best Regards,
--oswaldo.
[osantos]

Error occurred while generating PDF. Reason: ERROR_PDF_CONVERSION

I get an error generating my PDF whenever someone's name has a special character's in their name such as accents and diacritics.
Is this a bug or how do I properly set the charset for the <cfhtmltopdf> tag. I didn't have this issue with Coldfusion 9 and cfdocument. Any help in this regard would be much appreciated.
version: Coldfusion 11 Update 3 on Windows Server 2008 R2 on IIS 7.5
SEE STACK TRACE BELOW
coldfusion.document.webkit.PDFgErrorHandler$ServiceManagerConversionException: Error occurred while generating PDF. at coldfusion.document.webkit.PDFgErrorHandler.handleConversionError(PDFgErrorHandler.java:1 88) at coldfusion.document.webkit.HttpPDFRequestHandler.requestPDFGeneration(HttpPDFRequestHandl er.java:113) at coldfusion.tagext.lang.HtmlToPdfTag.processPDFgRequest(HtmlToPdfTag.java:1331) at coldfusion.tagext.lang.HtmlToPdfTag.handlePDFgConversionRequest(HtmlToPdfTag.java:1466) at coldfusion.tagext.lang.HtmlToPdfTag.convertToPDF(HtmlToPdfTag.java:1413) at coldfusion.tagext.lang.HtmlToPdfTag.doEndTag(HtmlToPdfTag.java:1551) at cfcfhtmltopdf_createPDF2ecfm2090701148.runPage(c:\inetpub\wwwroot\myapp.com\includes\docs \cfhtmltopdf_createPDF.cfm:25) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246) at coldfusion.tagext.lang.IncludeTag.handlePageInvoke(IncludeTag.java:736) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:572) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2986) at cfmethods2ecfm1148258034$funcSAVEPROXY.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\docs\ methods.cfm:472) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:420) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2424) at cfmethods2ecfm1658643382$funcPROCESSSTEP.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\mem berResults\methods.cfm:377) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:251) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:480) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:42) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:142) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:30) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:156) at coldfusion.xml.rpc.CFCServlet.doPost(CFCServlet.java:348) at javax.servlet.http.HttpServlet.service(HttpServlet.java:646) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:199) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:314) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61) at java.lang.Thread.run(Unknown Source)

Does anyone have any suggestions?
I've tried:
adding charset meta tags to the top of my outputted HTML contents that comprise the PDF
I've tried adding the <cfprocessingdirective pageencoding="utf-8" /> but doesn't seem to help.
#encodeForHTML(pdfHTMLVariable)# and even just tried encoding the individual variables that contained the special characters but that didn't seem to help anything as encoding them still won't work I'm assuming if the Charset is mis-matched.
Does the <cfprocessingdirective pageencoding="utf-8"> just have to be within the CFC method or does it need to be within the <cfhtmltopdf> tag?
Any input or things to try would be much appreciated as this is a regression for our app.
**As a side note: I would still just use CFDOCUMENT, but there was a different issue where the images were outputting a RED X where the image is supposed to be. Which from what I have been able to uncover has something to do with the server certificate not being trusted or something. However, our SSL provider is listed in the ROOT Certificate Authorities so not sure what's going on with that. Those images were being output with cfimage action of writeToBrowser .
I'd really like to fix the encoding issue does this have anything to do with language packs or missing languages of that sort? My app displays the page just fine when the UTF-8 charset meta tag is set.

Error occurs while generating the Query

Similar Messages

Maybe you are looking for