ERROR : OCR id mismatch, when running root.sh on node2

Hi,
We are using 2 node RAC setup in our project. Before start installation, i am verified pre-requisite using runcluvfy.sh, and everything passed. I am able to install and run ./root.sh on node1 successfully, but when i am trying to ./root.sh on node2 it's keep on failed. I am sharing ocssd.log below :
[    CSSD]2009-07-13 20:23:33.095 >USER: Oracle Database 10g CSS Release 10.2.0.1.0 Production Copyright 1996, 2004 Oracle. All rights reserved.
[    CSSD]2009-07-13 20:23:33.095 >USER: CSS daemon log for node dc3-linux1, number 2, in cluster dc3-linux
[ clsdmt]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=dc3-linux1DBG_CSSD))
[    CSSD]2009-07-13 20:23:33.098 [2537999104] >TRACE: clssscmain: local-only set to false
[    CSSD]2009-07-13 20:23:33.104 [2537999104] >TRACE: clssnmReadNodeInfo: added node 1 (dc3-linux5) to cluster
[    CSSD]2009-07-13 20:23:33.109 [2537999104] >TRACE: clssnmReadNodeInfo: added node 2 (dc3-linux1) to cluster
[    CSSD]2009-07-13 20:23:33.113 [1115699552] >TRACE: clssnm_skgxnmon: skgxn init failed, rc 1
[    CSSD]2009-07-13 20:23:33.113 [2537999104] >TRACE: clssnm_skgxnonline: Using vacuous skgxn monitor
[    CSSD]2009-07-13 20:23:33.114 [2537999104] >TRACE: clssnmInitNMInfo: misscount set to 60
[    CSSD]2009-07-13 20:23:33.116 [2537999104] >TRACE: clssnmDiskStateChange: state from 1 to 2 disk (0//dev/raw/raw2)
[    CSSD]2009-07-13 20:23:35.122 [1115699552] >TRACE: clssnmDiskStateChange: state from 2 to 4 disk (0//dev/raw/raw2)
[    CSSD]2009-07-13 20:23:35.178 [2537999104] >TRACE: clssscSclsFatal: read value of disable
[    CSSD]2009-07-13 20:23:35.178 [2537999104] >TRACE: clssscSclsFatal: read value of disable
[    CSSD]2009-07-13 20:23:35.178 [1136679264] >TRACE: clssnmFatalThread: spawned
[    CSSD]2009-07-13 20:23:35.178 [1147169120] >TRACE: clssnmconnect: connecting to node 2, flags 0x0001, connector 1
[    CSSD]2009-07-13 20:23:35.179 [1147169120] >TRACE: clssnmconnect: connecting to node 0, flags 0x0000, connector 1
[    CSSD]2009-07-13 20:23:35.179 [1147169120] >TRACE: clssnmconnect: connecting to node 1, flags 0x0001, connector 0
[    CSSD]2009-07-13 20:23:35.182 [1147169120] >TRACE: clssnmConnComplete: msg src=1 dst=2 seq=4 type=6 birth=1 state=3 name=()
*[    CSSD]2009-07-13 20:23:35.182 [1147169120] >ERROR: ASSERT clssnm.c 7611*
*[    CSSD]2009-07-13 20:23:35.182 [1147169120] >ERROR: clssnmConnComplete: OCR id mismatch* (1219530032, 231710834)
[    CSSD]2009-07-13 20:23:35.182 [1147169120] >TRACE: clssscctx: dump of 0x0x5d23c0, len 3792
[    CSSD]2009-07-13 20:23:35.182 [1147169120] >TRACE: 0x0x5d23c0 90 23 68 00 00 00 00 00 - 80 80 61 00 00 00 00 00 .#h...
So please help me to resolve this issue.
Thanks

Hi,
Thanks for your reply. I am using Red Hat Linux 4 x86-64 and Oracle 10gR2
Herewith i am attaching my configuration details.
runcluvfy.sh:
*~~~~~~~~*
$ ./runcluvfy.sh stage -pre crsinst -n dc3-linux5,dc3-linux1 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "dc3-linux5"
Destination Node Reachable?
dc3-linux5 yes
dc3-linux1 yes
Result: Node reachability check passed from node "dc3-linux5".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
dc3-linux5 passed
dc3-linux1 passed
Result: User equivalence check passed for user "oracle".
Checking administrative privileges...
Check: Existence of user "oracle"
Node Name User Exists Comment
dc3-linux5 yes passed
dc3-linux1 yes passed
Result: User existence check passed for "oracle".
Check: Existence of group "oinstall"
Node Name Status Group ID
dc3-linux5 exists 504
dc3-linux1 exists 504
Result: Group existence check passed for "oinstall".
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
dc3-linux5 yes yes yes yes passed
dc3-linux1 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Interface information for node "dc3-linux5"
Interface Name IP Address Subnet
eth0 10.77.242.56 10.77.242.32
eth1 192.168.1.1 192.168.1.0
Interface information for node "dc3-linux1"
Interface Name IP Address Subnet
eth0 10.77.242.60 10.77.242.32
eth1 192.168.1.2 192.168.1.0
Check: Node connectivity of subnet "10.77.242.32"
Source Destination Connected?
dc3-linux5:eth0 dc3-linux1:eth0 yes
Result: Node connectivity check passed for subnet "10.77.242.32" with node(s) dc3-linux5,dc3-linux1.
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
dc3-linux5:eth1 dc3-linux1:eth1 yes
Result: Node connectivity check passed for subnet "192.168.1.0" with node(s) dc3-linux5,dc3-linux1.
Suitable interfaces for the private interconnect on subnet "10.77.242.32":
dc3-linux5 eth0:10.77.242.56
dc3-linux1 eth0:10.77.242.60
Suitable interfaces for the private interconnect on subnet "192.168.1.0":
dc3-linux5 eth1:192.168.1.1
dc3-linux1 eth1:192.168.1.2
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
dc3-linux5 1.96GB (2056192KB) 512MB (524288KB) passed
dc3-linux1 1.96GB (2056192KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
dc3-linux5 29.14GB (30556108KB) 400MB (409600KB) passed
dc3-linux1 33.14GB (34752680KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
dc3-linux5 8GB (8385920KB) 1GB (1048576KB) passed
dc3-linux1 8GB (8385920KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
dc3-linux5 x86_64 x86_64 passed
dc3-linux1 x86_64 x86_64 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
dc3-linux5 2.6.9-67.0.7.ELsmp 2.6.9-11.EL passed
dc3-linux1 2.6.9-67.0.7.ELsmp 2.6.9-11.EL passed
Result: Kernel version check passed.
Check: Package existence for "binutils-2.15.92.0.2-13"
Node Name Status Comment
dc3-linux5 binutils-2.15.92.0.2-24 passed
dc3-linux1 binutils-2.15.92.0.2-24 passed
Result: Package existence check passed for "binutils-2.15.92.0.2-13".
Check: Group existence for "dba"
Node Name Status Comment
dc3-linux5 exists passed
dc3-linux1 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
dc3-linux5 exists passed
dc3-linux1 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
dc3-linux5 exists passed
dc3-linux1 exists passed
Result: User existence check passed for "nobody".
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.
After i did above check, then started installation on node 1 and done ./root.sh on node 1, it went successfully and+
started ./root.sh on node 2, it end with failure.+
root.sh on node1:
*~~~~~~~~~~~*
# sh -x ./root.sh
+ /opt/oracle/crs/install/rootinstall
WARNING: directory '/opt/oracle' is not owned by root
+ /opt/oracle/crs/install/rootconfig
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/opt/oracle' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: dc3-linux5 dc3-linux5-priv dc3-linux5
node 2: dc3-linux1 dc3-linux1-priv dc3-linux1
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/raw/raw2
Format of 1 voting devices complete.
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
dc3-linux5
CSS is inactive on these nodes.
dc3-linux1
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
root.sh on node 2:
*~~~~~~~~~~~*
# ./root.sh
WARNING: directory '/opt/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/opt/oracle' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: dc3-linux5 dc3-linux5-priv dc3-linux5
node 2: dc3-linux1 dc3-linux1-priv dc3-linux1
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
ocssd.log on node 2:
*~~~~~~~~~~~~~*
[    CSSD]2009-07-13 19:39:11.075 [1157658976] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_LclLstnr_dc3-linux_2))
[    CSSD]2009-07-13 19:39:11.076 [1157658976] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_dc3-linux1_dc3-linux))
[    CSSD]2009-07-13 20:23:33.095 >USER: Oracle Database 10g CSS Release 10.2.0.1.0 Production Copyright 1996, 2004 Oracle. All rights reserved.
[    CSSD]2009-07-13 20:23:33.095 >USER: CSS daemon log for node dc3-linux1, number 2, in cluster dc3-linux
[ clsdmt]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=dc3-linux1DBG_CSSD))
[    CSSD]2009-07-13 20:23:33.098 [2537999104] >TRACE: clssscmain: local-only set to false
[    CSSD]2009-07-13 20:23:33.104 [2537999104] >TRACE: clssnmReadNodeInfo: added node 1 (dc3-linux5) to cluster
[    CSSD]2009-07-13 20:23:33.109 [2537999104] >TRACE: clssnmReadNodeInfo: added node 2 (dc3-linux1) to cluster
[    CSSD]2009-07-13 20:23:33.113 [1115699552] >TRACE: clssnm_skgxnmon: skgxn init failed, rc 1
[    CSSD]2009-07-13 20:23:33.113 [2537999104] >TRACE: clssnm_skgxnonline: Using vacuous skgxn monitor
[    CSSD]2009-07-13 20:23:33.114 [2537999104] >TRACE: clssnmInitNMInfo: misscount set to 60
[    CSSD]2009-07-13 20:23:33.116 [2537999104] >TRACE: clssnmDiskStateChange: state from 1 to 2 disk (0//dev/raw/raw2)
[    CSSD]2009-07-13 20:23:35.122 [1115699552] >TRACE: clssnmDiskStateChange: state from 2 to 4 disk (0//dev/raw/raw2)
[    CSSD]2009-07-13 20:23:35.178 [2537999104] >TRACE: clssscSclsFatal: read value of disable
[    CSSD]2009-07-13 20:23:35.178 [2537999104] >TRACE: clssscSclsFatal: read value of disable
[    CSSD]2009-07-13 20:23:35.178 [1136679264] >TRACE: clssnmFatalThread: spawned
[    CSSD]2009-07-13 20:23:35.178 [1147169120] >TRACE: clssnmconnect: connecting to node 2, flags 0x0001, connector 1
[    CSSD]2009-07-13 20:23:35.179 [1147169120] >TRACE: clssnmconnect: connecting to node 0, flags 0x0000, connector 1
[    CSSD]2009-07-13 20:23:35.179 [1147169120] >TRACE: clssnmconnect: connecting to node 1, flags 0x0001, connector 0
[    CSSD]2009-07-13 20:23:35.182 [1147169120] >TRACE: clssnmConnComplete: msg src=1 dst=2 seq=4 type=6 birth=1 state=3 name=()
[    CSSD]2009-07-13 20:23:35.182 [1147169120] >ERROR: ASSERT clssnm.c 7611[    CSSD]2009-07-13 20:23:35.182 [1147169120] >ERROR: clssnmConnComplete: OCR id mismatch (1219530032, 231710834)
[    CSSD]2009-07-13 20:23:35.182 [1147169120] >TRACE: clssscctx: dump of 0x0x5d23c0, len 3792[    CSSD]2009-07-13 20:23:35.182 [1147169120] >TRACE: 0x0x5d23c0 90 23 68 00 00 00 00 00 - 80 80 61 00 00 00 00 00 .#h.......a.....
Please help me to resolve this issue.
Thanks
Edited by: user11361775 on Jul 13, 2009 11:58 PM
Edited by: Anandhan on Jul 16, 2009 2:54 AM

Similar Messages

Error when running root.sh after 11.g2 standalone rac installation

OS: redhat 5.8
After completing the installation, when running root.sh , I get error:
[root@vmorarac1 oracle]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/oracle
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Unrecognized character \x03 in column 3 at /u01/app/11.2/oracle/perl/lib/5.10.0/File/Basename.pm line 1.
Compilation failed in require at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.
BEGIN failed--compilation aborted at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.

Based on error messages you are getting it narrows down to perl issue and invalid character present in perl script.
Have you or someone modified the perl script? Usually it is required to modify the scripts to point toproper perl location. Sometimes when you modify the script, the text editors could insert some characters in wrong encoding, etc. So I suggest to do comparison to perl scripts from the nodes with the same psu levels where installation was sucessfull., just compare filesize and if its different, then you could possible copy right scripts over current ones.
The GI installations are very hard to investigate remotely, there could be too many things that can be wrong, so oracle support is your friend.
As general thing I always recommend to install latest PSU before root.sh script execution.
Ed Rudans
erudans.blogspot.com

11gR2 RAC install fail when running root.sh script on second node

I get the errors:
ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
[main] [ 2012-04-10 16:44:12.564 EDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
I have tried the fix solutions from metalink note, but did not fix issue
11GR2 GRID INFRASTRUCTURE INSTALLATION FAILS WHEN RUNNING ROOT.SH ON NODE 2 OF RAC USING ASMLIB [ID 1059847.1

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

Error -17300 is generated when running selected step

Error -17300 is generated when running selected step (with ot without process model).
Using TestStand 2.0.1f1
See BMP file for error dialog.
I was trying out the example in the Resource Library - TestStand | Process Models | Running Selected Steps via Execution Entry Point -Test UUTs or Single Pass
(link http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2B756A4E034080020E74861&p_node=DZ52222&p_source=external ). This example is a 1.0.1 example but the web page does say that it should work in 2.0.x
I followed the readme file to use from "Execute" menu:
I have attached the resulant SequentialModel.seq file.
The modifications to the SequentialModel.seq file appears to wo
rk, but when I tried to run 'Run Selected Steps Using' menu item. I got the error message -17300 displayed. (see ErrorScr.bmp attached). The only way to close the execution was to launch Task manager and 'End Task'.
I have attached a small demo sequencefile.
To try example:
Move the SequentialModel.seq to 'C:\TestStand\Components\User\Models\TestStandModels'.
Launch TestStand Sequence Editor and open 'Debug Example1.seq'.
This is how to generate error condition-
1. Run the sequence file from menu Item Execute | Single Pass. You should get a full run with test result, it fails but that doesn't matter.
2. Select Steps 1 and 3 in Main of MainSequence. Run Selected Steps using Single Pass. Again sequence executes correctly.
3. Now run the same selected steps using the new menu item Execute | Selected Test(s). Again the sequence executes again.
4. With Steps 1 and 3 still selected. Run Selected Steps using Single Pass (as in 2 above). This time the error -17300 will be gener
ated.
I also tried running the sequence first doing step 1 (as above), then step 3, then repeating step 1 and this was ok. So the problem appears to be in interactive only.
Any clues as to whats going on and how to resolve it.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏174 KB
Debug_Example1.seq ‏19 KB
ErrorScr.bmp ‏915 KB

Hi,
TestStand 2.0.1f1
Attached is a SequentialModel.seq that will run selected steps in a new execution using the process model. (It started life based on the inital
demo example)
When either Test UUT's or Single Pass is selected a check is made to determine if there is an initial selection.
If there isn't then the normal Test UUT's or Single Pass sequence is run.
If there is then a new sequence file is created with a new MainSequence. The selected steps are cloned and inserted to the new MainSequence. Also
the Setup and Cleanup groups are also cloned. Likewise the FileGlobal Defaults are copied to the FileGlobals of the new Sequencefile and also the
Locals.
Any Sequences contained in the SequenceFile are cloned to the new sequencefile (except the MainSequence, SequenceFileLoad and SequenceFileUnLoad).
In addition, as the Steps are cloned any break point are also set in the new sequence file.
The new sequence file is executed in a new execution using the process model entry point with the break on first step controlled from the menu
option.
One thing I am assuming is that there is only one element in the RunState.InitialSelection.SelectedSequences array.
Question: Under what circumstances will there be more than one selected sequence?
I had one problem, I tried my SequentialModel.seq with the demo auto.seq. This contains the SequenceFileLoad and SequenceFileUnload.
When I run this demo with a few steps selected, it run ok but when I closed the results window the UnloadFile callback was executed.
I found an option that can be set with the Engine.ReleaseSequenceFileEx which should have stopped the UnloadFile callback from running. But it
made no difference.
I then came across SequenceFile.UnloadCallbackEnabled() and using this function it did disable the Unload callback and this worked.
Question: So, Why didn't setting the Option in the Engine.ReleaseSequenceFileEx work?
Limitation using this SequentialModel.seq,
1) Any precondition to a step's execution based on the result of an early steps are not check when cloning the selected steps. Therefore this has
to be done manually when making the selection.
2) All Sequences in the SequenceFile are cloned to the new sequencfile. (May not be a problem when SequenceFile contains only a few sequences.)
3) The selections are limited to the MainSequence. If steps are selected in a Subsequence then these would be copied to a new MainSequence and
this would be run. Providing this doesn't require any parameters passed from the original caller then this should still run. The problem will
arise if parameters are required.
4) This is not really a limitation - If a full run of the SequenceFile using Test UUT's or Single Pass is required then the user must ensure no
steps are selected.
What I whould like to happen is the ability to make a selection in SubSequence calls either one or two levels down from the MainSequence. The new
execution setup would contain those steps in the MainSequence that are required to call those selected steps in the lower levels.
Would welcome any comments on my SequentialModel.seq attached and answers to my questions.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏233 KB

10g R2 RAC on Solaris 10 error when running root.sh

hi, I am installing Oracle 10g rac on Solaris 10 with two nodes. In the end of the installation of RAC when a run root.sh I get the error bellow.
# /opt/crs/oracle/product/10.2.0/crs/root.sh
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Failed to upgrade Oracle Cluster Registry configuration

I have done this install using a pair of T2000's and a 65XX SAN. The install doco is not straight forward. I had to compile a number of Metalink notes to eventually get the disk partitions sorted. Of particular help was Note:271621.1.
Since I am not a Solaris admin, the next bit is caveated as "This is how I did it" and maybe not how anyone else would have done it. These things were not explicitly noted, but gleaned through a bit of reading:
1) you need to throw away the first cylinder of each LUN. I did this by creating the first partition as a single cylinder.
2)then create s4 (or whichever slice you desire) as the rest of the space allocated to that LUN.
3) Repeat this for each LUN presented
4) I created a directory /san under which I then created the character mode (raw) interface for each of ocr, vote.
5) For asm, and for no other reason than being self documenting, I created /san/asm and created character mode interfaces to each of the LUN's for datadg and fradg
6) repeat steps 1-5 on the other box
I took quite some time (2 days) to extract all this and assemble it to a working system. But has always been stable.
Regards,
Kevin Crowley
Principal Consultant
Pacific DBMS P/L

How to capture error messages for BCP when running through XP_CMDSHELL

XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.

Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

Error in the Informatica when running the DAC load( Prebuilt Analytics)

Hi All,
Please help me with the below issue with the informatica i am getting when running the DAC load:
Below are the details:
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST(F0006.MCRP10 AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST(F0006.MCRP14 AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST(F0006.MCRP01 AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST(F0006.MCRP15 AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST(F06.MCRP16 AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,---------------------------Table name should be F0006
CAST(F0006.MCRP12 AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST(F0006.MCRP27 AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST(F0006.MCRP03 AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST(F0006.MCRP23 AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST(F0006.MCRP24 AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST(F0006.MCRP12 AS CHAR(10)) AS STATE_REGION,
CAST(F0006.MCRP04 AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
As mentioned in the SQL the table name should be F0006 instead F06, I have checked the Source Qualifier transformation and below is the SQL issued
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST($$FLEX_ATTRIB_1_CHAR AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST($$FLEX_ATTRIB_2_CHAR AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST($$FLEX_ATTRIB_3_CHAR AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST($$FLEX_ATTRIB_4_CHAR AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST($$FLEX_ATTRIB_5_CHAR AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST($$FLEX_ATTRIB_6_CHAR AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST($$FLEX_ATTRIB_7_CHAR AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST($$FLEX_ATTRIB_8_CHAR AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST($$FLEX_ATTRIB_9_CHAR AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST($$FLEX_ATTRIB_10_CHAR AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,
CAST($$FLEX_ATTRIB_11_CHAR AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST($$FLEX_ATTRIB_12_CHAR AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST($$FLEX_ATTRIB_13_CHAR AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST($$FLEX_ATTRIB_14_CHAR AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST($$FLEX_ATTRIB_15_CHAR AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST($$FLEX_ATTRIB_16_CHAR AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST($$FLEX_ATTRIB_17_CHAR AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST($$FLEX_ATTRIB_18_CHAR AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST($$FLEX_ATTRIB_19_CHAR AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST($$FLEX_ATTRIB_20_CHAR AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST($$STATE_REGION AS CHAR(10)) AS STATE_REGION,
CAST($$COUNTRY_REGION AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
The error code and error message in the workflow monitor says:
Message Code: VAR_27028
Message: Use override value [F06.MCRP16] for mapping parameter:[mplt_BC_SDE_JDE_InternalOrganization_BusinessUnits.$$FLEX_ATTRIB_10_CHAR].
Some how it is overridng all the values so please let me know what i can do.
Thanks in Advance

Oracle Support

My DAQ program uses Traditional NI-DAQ in Visual C++ 6.0. I get error-10609 at SCAN_Start when run

My data acquisition program uses Traditional NI-DAQ in Visual C++ 6.0. When I run the program, I get error -10609 at the SCAN_Start that states
A transfer is already in progress for the specified resource, or the operation is not allowed because the device is in the process of performing transfers, possibly with different resources.
Why do I receive this error?

Hi,
TThe error -10609 can result from several situations in which the device's resources are already in use.
A Measurement & Automation (MAX) test panel is already open.
If you open a test panel window for your device and attempt to run your application, you can get this error. If this is the case, close the MAX test panel.
An AI Clear function was not used at the end of the previous acquisition.
If you do not call the AI Clear function after performing your acquisition, the resources remain open. Be sure to call this function, inputting your taskID, at the end of the acquisition.
Multiple programs are accessing the device.
If you have multiple VIs accessing the device, or perhaps a LabVIEW VI and another application, the resource will be taken and you will receive the error. You can only run one application accessing the specific resource (for example, analog input on channel 0) at a time
I hope this helps...and have a Great Day!
George

11gR2 RAC installation in AIX fails while running root.sh on node2

Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
Regards

HI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian

Error when running root.sh on node1...

Oracle10GR2 RAC
RHEL 4 64bit
Hi,
I am almost through the clusterware installation. However, I am at the part where I have to run the root.sh scripts. When I run in on my first node I get the following message:
[root@galapagos home]# ./root.sh
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
/crs/home/bin/crsctl.bin: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No s uch file or directory
Failure initializing entries in /etc/oracle/scls_scr/galapagos.
Do I need to worry about this? I'm pretty sure it is suppose to be error free.
Any help would be appreciated.
Thanks.

Apparently, you are missing a c++ library. Please check to see if you have a library by name some thing like 'compat-libstdc++-*'
$rpm -qa |grep c++
libstdc++-devel-32bit-9-200407011229
libstdc++-3.3.3-43.41
compat-libstdc++-lsb-4.0.2_20050901-0.4 #-----This may be missing
libstdc++-devel-3.3.3-43.41
gcc-c++-3.3.3-43.41
HTH
Thanks
Chandra Pabba
PS: After posting this message, I have seen you second post...please ignore..
Message was edited by:
ChandraP

Installing Clusterware/ASM Grid 11.2.0.1, errored out when running root.sh

Working through the installation of Clusterware/ASM Grid using 11.2.0.1.
After running the first root.sh script, no problems. On the second one, getting this error:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/grid/1120/grid/crs/install/roothas.pl line 413.
Any ideas of how to get this running?

Hi guys,
I'm having this problem on the second node and in the /var/log files I'm getting these errors.
Can any one help?
Regards,
Ahmed
May 26 16:05:37 node su(pam_unix)[7567]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.
May 26 16:05:37 node su(pam_unix)[7571]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.
May 26 16:05:37 node su(pam_unix)[7570]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.
May 26 16:05:37 node su(pam_unix)[7583]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.

Error when running root.sh

I got the following message when I ran root.sh, at the end of installing 9ias on linux 6.2.
' Please delete any log and trace files previously created by the oracle enterprise manager intelligent agent. These files may be found in the directory used for storing other net8 log and trace files. If such files exist the OEMIA might not restart '
Does any one have any idea of the locatinof the log and trace files, mentioned in this message, or why I got this message
pam

Apparently, you are missing a c++ library. Please check to see if you have a library by name some thing like 'compat-libstdc++-*'
$rpm -qa |grep c++
libstdc++-devel-32bit-9-200407011229
libstdc++-3.3.3-43.41
compat-libstdc++-lsb-4.0.2_20050901-0.4 #-----This may be missing
libstdc++-devel-3.3.3-43.41
gcc-c++-3.3.3-43.41
HTH
Thanks
Chandra Pabba
PS: After posting this message, I have seen you second post...please ignore..
Message was edited by:
ChandraP

Vb error 'run-time error '13', type mismatch when starting SAP BEX Analyzer

Dear experts,
I encountered the above error whenever I opened the BEX analyzer either from the start program or call sap transaction 'RRMX'.
My desktop is currently running BEX 3.50 with patch level 5 and office XP and my SAPGUI version is SAPGUI 6.4 compilation 2, patch level 11.
I have tried installed and reintalled SAPGUI and also downloded the latest patch from the net but still having the same problem.
Any input/help will be greatly appreciated.
Thank you,
NCW

I managed to solve the problem by uninstalling some of the recent Microsoft XP security patch (released in April '05). So, I think the problem is due to the security patch.
Just hope that there will be a fix by SAP so that we can still have the uptodate security patches.

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

OAF 12.2.4 - 500 Internal Server Error java.io.IOException when running a page from Jdeveloper

Hi All,
I face the following error message in the web browser when I try to run a simple page from JDeveloper:
500 Internal Server Error java.io.IOException
The message is the same when I run the Hello World test from the Tutorials project.
Here is the error stack:
500 Internal Server Error
java.io.IOException
        at oracle.apps.fnd.common.WebRequestUtil.validateContextPrivate(WebRequestUtil.java:559)
        at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:334)
        at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:237)
        at _OAErrorPage._jspService(_OAErrorPage.java:337)
        [/OAErrorPage.jsp]
        at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.5.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
        at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
        at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
        at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:280)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:68)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:214)
        at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:871)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:816)
        at _OA._jspService(_OA.java:130)
        [/OA.jsp]
        at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.5.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
        at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
        at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
        at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:226)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:127)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:116)
        at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
        at java.lang.Thread.run(Thread.java:662)
This is JDeveloper 10.1.3.5.0 from patch p19170592_R12_GENERIC.zip
The OAF release is 12.2.4
JDEV_USER_HOME is set to C:\Olivier\R12\jdev1224\jdevhome\jdev
The .dbc file looks fine.
I connect successfully to database.
I tried to reinstall JDeveloper.
I performed many searches on MOS, OTN, Google, etc...
I tried to change the Startup Settings (Host Name, IP Address settings) of the Embedded OC4J Server Preferences.
I am stuck.
Any ideas?
Thanks,
Olivier

Hi Peddi,
Thanks for your reply.
I checked again the .dbc file.
I downloaded again the file from $INST_TOP/appl/fnd/12.0.0/secure to <JDEV_USER_HOME>\dbc_files\secure
This file worked fine for JDeveloper for 12.2.3.
I went again through "Oracle Application Framework Developer's Guide Release 12.2.4 July 2014" but could not find any part related to .dbc file having changed from previous release.
I tried to comment out the parameter APPS_JDBC_URL in .dbc as per MOS note "Troubleshooting JDeveloper setup for Oracle Applications (Doc ID 357218.1)"
But I still face the issue.
According to the note "Configuring JDeveloper For Use With Oracle Applications 11i and R12 (Doc ID 330236.1)", I have added the following debug parameters in the project properties:
-Djbo.debugoutput=console -Djbo.logging.trace.threshold=9 -Djbo.jdbc.driver.verbose=true -Djbo.jdbc.trace=true
It generated the following OC4J server detailed log showing more error messages (in red below):
[extract]
15/02/04 17:13:56 [553] Successfully logged in
15/02/04 17:13:56 [554] JDBCDriverVersion: 11.2.0.2.0
15/02/04 17:13:56 [555] DatabaseProductName: Oracle
15/02/04 17:13:56 [556] DatabaseProductVersion: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options
15/02/04 17:13:56 [557] Root application module, oracle.apps.fnd.framework.toolbox.tutorial.server.HelloWorldAM, was created at 2015-02-04 17:13:56.283
15/02/04 17:13:56 [558] setConnectionReleaseLevel - Set connection release level to 0
15/02/04 17:13:56 [559]
<ICX_SessionValues_Diagnostics - ICX Cookie = 4tzlN3OR7BSoTLXf4grnQylQ4l>: WebRequestUtil.validateContext is called.
15/02/04 17:13:56 [560] SQLState(42000) vendor code(2248)
15/02/04 17:13:56 [561] java.sql.SQLSyntaxErrorException: ORA-02248: invalid option for ALTER SESSION
ORA-06512: at "SYS.DBMS_SESSION", line 164
ORA-06512: at line 6
15/02/04 17:13:56 [562] at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:94)
15/02/04 17:13:56 [563] at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:147)
15/02/04 17:13:56 [564] at oracle.jdbc.driver.DatabaseError.createSqlException(DatabaseError.java:206)
15/02/04 17:13:56 [565] at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:456)
15/02/04 17:13:56 [566] at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
15/02/04 17:13:56 [567] at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
15/02/04 17:13:56 [568] at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
15/02/04 17:13:56 [569] at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
15/02/04 17:13:56 [570] at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
15/02/04 17:13:56 [571] at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:213)
15/02/04 17:13:56 [572] at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1075)
15/02/04 17:13:56 [573] at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
15/02/04 17:13:56 [574] at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
15/02/04 17:13:56 [575] at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
15/02/04 17:13:56 [576] at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:9259)
15/02/04 17:13:56 [577] at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
15/02/04 17:13:56 [578] at oracle.apps.fnd.sso.SessionMgr.loadInstalledLanguages(SessionMgr.java:4119)
15/02/04 17:13:56 [579] at oracle.apps.fnd.sso.SessionMgr.getInstalledLanguages(SessionMgr.java:3872)
15/02/04 17:13:56 [580] at oracle.apps.fnd.sso.Utils.getBaseInstalledLangCode(Utils.java:1491)
15/02/04 17:13:56 [581] at oracle.apps.fnd.sso.Authenticator.<clinit>(Authenticator.java:45)
15/02/04 17:13:56 [582] at oracle.apps.fnd.sso.Utils.<clinit>(Utils.java:675)
15/02/04 17:13:56 [583] at oracle.apps.fnd.sso.SSOManager.canUpgradeToUserSession(SSOManager.java:3000)
15/02/04 17:13:56 [584] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
15/02/04 17:13:56 [585] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
15/02/04 17:13:56 [586] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
15/02/04 17:13:56 [587] at java.lang.reflect.Method.invoke(Method.java:597)
15/02/04 17:13:56 [588] at oracle.apps.fnd.common.WebRequestUtil.validateContextPrivate(WebRequestUtil.java:557)
15/02/04 17:13:56 [589] at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:369)
15/02/04 17:13:56 [590] at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.validateIcxCookie(Unknown Source)
15/02/04 17:13:56 [591] at oracle.apps.fnd.framework.OASessionCookieHelper.validateIcxSession(Unknown Source)
15/02/04 17:13:56 [592] at oracle.apps.fnd.framework.OASessionCookieHelper.initializeApplicationModule(Unknown Source)
15/02/04 17:13:56 [593] at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.initializeApplicationModule(Unknown Source)
15/02/04 17:13:56 [594] at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(Unknown Source)
15/02/04 17:13:56 [595] at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
15/02/04 17:13:56 [596] at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(Unknown Source)
15/02/04 17:13:56 [597] at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(Unknown Source)
15/02/04 17:13:56 [598] at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
15/02/04 17:13:56 [599] at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
15/02/04 17:13:56 [600] at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
15/02/04 17:13:56 [601] at _OA._jspService(_OA.java:72)
15/02/04 17:13:56 [602] at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
15/02/04 17:13:56 [603] at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
15/02/04 17:13:56 [604] at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
15/02/04 17:13:56 [605] at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
15/02/04 17:13:56 [606] at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
15/02/04 17:13:56 [607] at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
15/02/04 17:13:56 [608] at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
15/02/04 17:13:56 [609] at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:280)
15/02/04 17:13:56 [610] at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:68)
15/02/04 17:13:56 [611] at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:214)
15/02/04 17:13:56 [612] at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
15/02/04 17:13:56 [613] at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
15/02/04 17:13:56 [614] at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
15/02/04 17:13:56 [615] at _OA._jspService(_OA.java:81)
15/02/04 17:13:56 [616] at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
15/02/04 17:13:56 [617] at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
15/02/04 17:13:56 [618] at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
15/02/04 17:13:56 [619] at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
15/02/04 17:13:56 [620] at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
15/02/04 17:13:56 [621] at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
15/02/04 17:13:56 [622] at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
15/02/04 17:13:56 [623] at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
15/02/04 17:13:56 [624] at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
15/02/04 17:13:56 [625] at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:226)
15/02/04 17:13:56 [626] at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:127)
15/02/04 17:13:56 [627] at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:116)
15/02/04 17:13:56 [628] at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
15/02/04 17:13:56 [629] at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
15/02/04 17:13:56 [630] at java.lang.Thread.run(Thread.java:662)
15/02/04 17:13:56 [631] Could not load application module 'oracle.apps.fnd.framework.toolbox.tutorial.server.HelloWorldAM'.
15/02/04 17:13:56 [632] oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.io.IOException;
at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.validateIcxCookie(Unknown Source)
at oracle.apps.fnd.framework.OASessionCookieHelper.validateIcxSession(Unknown Source)
at oracle.apps.fnd.framework.OASessionCookieHelper.initializeApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.initializeApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(Unknown Source)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at _OA._jspService(_OA.java:72)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:280)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:68)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:214)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at _OA._jspService(_OA.java:81)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:226)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:127)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:116)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:662)
## Detail 0 ##
java.io.IOException
at oracle.apps.fnd.common.WebRequestUtil.validateContextPrivate(WebRequestUtil.java:559)
at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:369)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.validateIcxCookie(Unknown Source)
at oracle.apps.fnd.framework.OASessionCookieHelper.validateIcxSession(Unknown Source)
at oracle.apps.fnd.framework.OASessionCookieHelper.initializeApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.initializeApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(Unknown Source)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at _OA._jspService(_OA.java:72)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:280)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:68)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:214)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at _OA._jspService(_OA.java:81)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:226)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:127)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:116)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:662)
15/02/04 17:13:56 [633] In OADBTransactionImpl.rollback()
15/02/04 17:13:56 [634]      conn.rollback(); // JBO-JDBC-INTERACT
15/02/04 17:13:56 [635] Resetting AM=HelloWorldAM
15/02/04 17:13:56 [636] OAApplicationPoolImpl.setConnectionReleaseLevel was called with isReleased = true, isReserved = false
15/02/04 17:13:56 [637] setConnectionReleaseLevel - Set connection release level to 2
Regards,
Olivier

ERROR : OCR id mismatch, when running root.sh on node2

Similar Messages

Maybe you are looking for