Error ocurred while mingling data

iTunes can't sync my contacts because of this error while mingling data. Any suggestions? I tried checking all the options in the advanced section "Replace Information on This iPhone" and syncing again with no luck.

Open isync in the applications folder.
Open the isync preferences and reset sync history.
Then choose "Replace Information on This iPhone" in the advanced section of the info tab.
Now try syncing the iphone.
Hope this helps.

Similar Messages

  • Cannot sync calendars... error occurred while mingling data???

    Error message after iPhone update:
    iTunes could not sync calendars to the iPhone...... 's iPhone because an error occurred while mingling data.
    A bug?
    I have a stock iPhone.
    What gives?

    Carl Jonsson wrote:
    Error message after iPhone update:
    iTunes could not sync calendars to the iPhone...... 's iPhone because an error occurred while mingling data.
    A bug?
    I have a stock iPhone.
    What gives?
    There was recently a tech article about this but I can't seem to find it. I remember it because of the odd use of the word mingling. The problem seemed to be triggered by Calendar events that have a blank title field. You may have accidently created one.

  • When syncing my iphone i get a msg, "itunes could not sync calendars to the iphone because an error occurred while merging data"   I sync my calendar to outlook.  My iphone calendar has all and the most updated information.  Outlook shows only recurringMY

    I'm at a loss as to what to do. Any help is appreciated.  When syncing my iphone I get an message, "itunes could not sync calendars to the iphone because an error ocurred while merging data" I sync my calendar to outlook.  My iphone calendar has all and the most updated information.  Outlook calendar only shows my recurring events. 

    hi there,
    i've found a great & simple solution for this problem
    just open your iCloud acc on iPhone
    turn off calendars (it wil ask you to keep info or not - KEEP IT!)
    and turn back on (MERGE!)
    now SYNC it..
    and that's it
    PS in my case it was contacts so the procedure is the same..

  • I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

    I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

    One thing that might help.
    1. open itunes preferences from the edit menu and click on the devices tab.
    2. check the box to disable syncing for iphones connected to itunes and click ok.
    3. Then click the button to reset sync history.
    4. Now click ok to close the preferences window.
    5. connect the iphone to itunes and go to the info tab.
    6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
    7. then click apply on the bottom right of itunes.
    This will overwrite any events on the iphone, including any events that has become corrupted.
    Hope this helps

  • I am getting error "An error ocurred while installing updates (103) when I try to do update for OSX

    Whenever I try to update an OSX Update, I get the error message "An error ocurred while installing updates." (103).  Has anyone encountered any such error?

    Try each of the following steps.
    Step 1
    If you're trying to install more than one update, do the updates one at a time.
    Step 2
    Triple-click anywhere in the line below on this page to select it:  
    /Library/Updates
    Right-click or control-click the highlighted line and select
    Services ▹ Open
    from the contextual menu. A folder should open. Move the contents to the Trash. You may be prompted for your administrator password.

  • SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

    Anyone can help with the below issue please? Much appreciated.
    We have about 2k+ messages in sys.transmission_queue
    Telnet to the ports 4022 is working fine.
    Network connectivity has been ruled out.
    The firewalls are OFF.
    We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
    GRANT
    CONNECT ON
    ENDPOINT <broker> <domain\serviceaccount>
    Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
    Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
    The
    connection was
    closed by the
    remote end,
    or an
    error occurred while
    receiving data:
    '64(The specified network name is no longer available.)'

    We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
    Microsoft SQL Server 11.0.2100.60
    Service Broker Diagnostic Utility
    An internal exception occurred: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    P  29830                                 Could not find the connection to the SQL Server that
    corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
    The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
    no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
    back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
    When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
    Once, we are able to nail down the root cause, I will share more information.

  • Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

    I have set-up an ECT in SPD2013 on SP2013.  It is a SQL Data source called ProjectWebApp.   I have BCS/SSS set-up.  I can create an ECT OK in SPD.  I can add the ECT to a custom list.
    The problem is when I add a new item in the list the following error message appears in red
    An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
    I cannot filter or return any results.  There is data in the DB.
    Another test I do is to try and create a new App/List using the "External List" template.  When
    I select the ECT a red message appears "External Content Types are not available".  which is odd since I can add an ECT to a list as mentioned above.
    Any ideas?
    Tx
    Andrew
    Andrew Payze

    Hi Andrew,
    Please try the option Allow unlimited length in document libraries in the column settings:
    http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
    If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
    http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
    Please provide error message in ULS log for further troubleshooting.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • An error ocurred while loading this content! Ive using my ATV for more than 6 months and last week i update the sw and since then i have rented two movies and keep seeing the same message. I have reset the ATV two times without success. Any suggestions?

    I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
    ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
    I restarted the ATV - no success
    I reset my wireless - no success
    I reset my ATV - no success
    netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
    Any ideas?

    I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
    ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
    I restarted the ATV - no success
    I reset my wireless - no success
    I reset my ATV - no success
    netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
    Any ideas?

  • TS2634 My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What

    My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What can I do next since it doesn't give me even one clue as to what the error would be?

    Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted :  a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone.  I deleted that event, then went through the calendar resync one by one, and all seems OK now.
    In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them.  It would be nice to have a similar way to work with Calendar!
    Thanks for pointing me to the right article.

  • Itunes wont inport anythig it show listings but comes up with error ocurred while converting (song title ) the required file cannot be found using windows 8

    itunes wont inport anythig it show listings but comes up with error ocurred while converting (song title ) the required file cannot be found using windows 8

    iTunes cannot convert protected WMA tracks. There may also be problems if it can't get full access permissions. What exactly are you trying to do when the error occurs?
    tt2

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • Message "iTunes could not sync contacts to iPhone because an error occurred while committing data"

    Hello all. I recently replaced the HD in my MacBook Pro. Just after, I retrieved my old files from the Time Machine backup, which I made just before the replacement. During the first sync of my iPhone via iTunes and while I was trying to sync my contacts I saw the message "iTunes could not sync contacts to iPhone because an error occurred while committing data". After that, I lost my iPhone contacts (I have them only from iCloud). The only problem is contacts, all the others (Calendars, Apps) are normally syncing. Does anybody has a solution? Thanks in advance!

    hello,
    There was a similiar posting that I have seen from others and they found out that the back up was bad. https://discussions.apple.com/message/6139533#6139533
    I would use a previous backup (earlier one) to the one you have tried to just do.

  • Error occurred while merging data

    I'm a newbie to the mac world but have been using my IPhone and loving it. However when I plugged in the Iphone to my new IMac I get this:
    Itunes could not sync calendars to the iPhone because an error occurred while merging data.
    I started getting that same message a few weeks ago on my PC, but just figured it was because of a soon to be replaced pc was...well soon to be replaced. Any thoughts?

    Hello everyone. I am sorry to see your having this issue today. Posted below are some troubleshooting steps that may assist with troubleshooting.
    1. As stated try Reset Sync History.
    On a Windows. Open iTunes. Go to Edit- Preferences-iPhone-Reset Sync History and Confirm
    On a Mac- go to Applications-iSync- Then open iSync Prefs. Then reset sync history and confirm.
    Now attempt to sync data again.
    2. Make sure any data thats on the iPhone that is not in one of the programs on the PC is there now. As this second option will erase that data you manually added unless it already exists on the PC/Mac
    Go to Info- scroll down to Advanced. and put a check mark into Contacts or Calendars. Depending on what is causing the issue. Attempt to Sync again. Check results. If this works normal syncing can take place.
    3. Test Syncing on another USB Port
    4. Reboot the PC/Mac and Sync again
    5. If possible and you do not care about the data on iPhone and assuming it is backed up. Try to sync using another user account or another PC. This will help isolate it to a possible user issue or PC issue and sometimes even an iPhone issue itself.
    6. Try syncing with just the iPhone USB Cord, then try with Dock. See if results are any different.
    Let us know how this works out.

  • "...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?

    I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
    Today I accepted the latest upgrade to my iPhone software.
    Since it installed, it will not sync.
    It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone."  After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
    Has anyone else run into this Undocumented Feature of the latest upgrade?
    As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
    Thanks to anyone who can help!
    Steve Callender

    Tried rebooting the phone, and now it works.
    Guess there's 2 lessons here -
    Boot again when installing new SW, even if the phone reboots itself during installation, and
    Boot to see if that fixes a problem before posting it.
    Steve

  • Error: An error occurred while skipping data rows

    I am constantly getting error message “Error: An error occurred while skipping data rows”. Here is my scenario:
    I am pulling data from a text flat file which is Vertical Bar {|} delimited. My data source files naturally come without headers (no column names on first row). So what I did to bypass
    this is –
    I used a control file to supply the header names when I developed my package. This control file’s column names have corresponding column order used in the data source files.
    I then added an expression to my Flat File Connection Manager so that the system should automatically pick up new incoming files (files without headers).
    Now when I try to run my package I am receiving “Error: An error occurred while skipping data rows”. Could this be due to the fact that the system is expecting the column names which I
    entered when I developed the package while this new file does not have any headers, or could it be something different? There is very little information on the internet about this kind of error message. The only meaningful information that I have found is
    from the link below but unfortunately the case explained there is not the same as my situation.
    http://social.msdn.microsoft.com/forums/sqlserver/en-US/a790460b-9ef5-482b-b219-f55c05fa30d3/error-occured-while-skipping-data-rows
    I’m also aware that one can get the same error if the specified delimiter type on their package is different from the one on the flat file. Still that is not the case in my situation. Can
    someone please kindly help me troubleshoot this.
    Many thanks,
    Mpumelelo

    I have managed to address my problem. I did not have to manually enter some nearly 2000 column names by hand. Here is what I have done. I will explain it in detail for the benefit of those who might face the same problem but have no answers on how to work
    around it.
    I have maintained the column names from the control file because it was important for me to do this in the interest of some data flow components further down the pipeline. It therefore means that my package Flat File Source components have column names
    on both the External Column and Output Column sides.
    When I configured the Flat Files Source component using the control file I left the option “Column names in the first row” ticked as shown in the picture below. This is the default selection from Microsoft.
    I then went to my flat file connection manager; right clicked it and selected “Properties” to get something like shown below. You will notice that property “ColumnNamesInFirstRow” is down as “True” because when configuring my flat file manager I left
    that selection ticked. To address my problem I changed property “ColumnNamesInFirstRow” from “True” to “False” and saved my package.  This means that during runtime the package will not use the first row as column names but will use the already predefined
    column names which I entered from the control file. Please note that selecting the option of not using the first row as column names should be done from the Properties selection instead of the Flat File Source component. Changing this property from the Flat
    File Source component automatically changes all the metadata whereas doing this from the Properties selection leaves the metadata on the Flat File Source component unchanged.
    Mpumelelo

Maybe you are looking for