Error :: ODBC Unable To Open Database And Windows Photo Gallery. How do I fix?
I get an ODBC error when I try to get photos in the organizer of Photoshop 4. It just started. What is wrong?
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Similar Messages
-
I have bridge open, but it opens images in Windows Photo Gallery
I have been trying to open some images, but it won't open them in Photoshop, If I double click on a raw image it opens it in Windows photo gallery. I have to right click to get it to go to camera raw, what has happened.
Sorry just assumed you would realise it was PS CC.
It was opening the NEF files in camera raw,but today it stopped and started opening them in that photo gallery, I don't know how to change it back. I went to prefences in Bridge and it has photo gallery next to the NEF files, but doesn't look like I can change them. -
Elements 9 Opening with from Windows Photo Gallery
I have just installed Elements 9 which was an upgrade from my previous Elements 7, which was the successr to 6 which was pre-installed on my laptop.
I have retained Elements 7 as the new install process indicated that it would stay on the system but in effect lie dormant. However my problem now is that when using the 'Open With' command in Windows Photo Gallery it still defaults to PSE7 and not automatically go to 9 which I want. I have tried finding a way to set PSE9 as my default but can't seem to work that. If I delete the PSE7 version on my laptop will that affect my use of 9 as it was an upgrade.
Can any one help perhaps please.
Many thanks
RobNo need to delete PSE7.
In the Open With dialog click Browse.
Then navigate to the PSE9 folder and select the PSE9 editor.exe file.
That should do it. -
Upgraded to 23.0.1 and now bookmarks toolbar only shows open tabs and not bookmarks. How to I fix?
Running Win 7 Home Premium. When I upgraded to Firefox 23.0.1, the Bookmarks Toolbar no longer shows my bookmarks which are in Bookmarks Toolbar but shows open tabs. If I uncheck "View Bookmarks Toolbar" the blank toolbar disappears, open tabs stay in there position. If I recheck "View Bookmarks Toolbar" a blank toolbar reopens but open tabs are on the toolbar. I tried to move a bookmark to the toolbar but all it does is open a tab of the location of the bookmark I tried to position on the toolbar.
hello, please try to restore the default toolbar set as it's described in [[Navigation buttons like back, home, bookmarks and reload are missing]]
-
My IMac turns off unexpectedly in both Mac & Windows mode. I've repaired disc and permissions using the Snow Leopard install disk and cleared the cache without help. Any ideas how to prevent this?
The HAT test detected no problems. Perhaps one of the peripherals, e.g., the backup disk, is causing the problem. I'll try to run the MAC without peripherals for a few days and see what happens, unless you have other suggestions.
Thanks -
People are unable to open my e-mail attachments. How can I fix this ?
I have just switched from a pc to a mac. I have been attaching j-pegs to the e-mails via the safety pin icon to my e-mails. Recipients can see the images on their computers but cannot open them to save or copy them. Am I doing something wrong?
From the Mail menu bar, select
Edit ▹ Attachments ▹ Always Send Windows-Friendly Attachments -
After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"
Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3. I tried ADE 4 but no better. I have an older PC using Vista and ADE 2 and that will download okay but it is constantly being used so it is not convenient. Does anybody know what's wrong? Thanks.
Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day -
Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastianExcellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.) -
I cant run tds220 (driver for oscilloscope).
Error message:
VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
Furthermore
I cant run Visa INteractive control.
Error message:
"Unable to open session to "ASRL1::INSTR" Return value 0xBFFF0072 Status name VI-ERROE-RSRC-BUSY . VISA csnnot currently access this resource."
Then change ports, this message appears for another port.
Thanks for answer.
GitaThe port is open by another resource. You note that you should also get an error if you try to access the port in hyperterminal. Try rebooting your computer and the first thing you try is opening a VISA session with Visa Interactive control(VISAIC).
If that fails, then you have a driver accessing your ports.
If it works then it was just two applications that were trying to access your port (LabVIEW and VISAIC are seperate apps even thought they both may be using VISA.)
Closing VISA sessions:
LabVIEW will only *automatically* close VISA sessions if you have this option set: Tools>>options>>Automatically close VISA sessions.
Otherwise you need to explicitly call a Visa close on the resource. -
"Error 1002097 Unable to Load database" while starting an Essbase App.
Hello Essbase Experts,
I am getting below error while starting an Essbase Application:
"Error 1002097 Unable to Load database"
Below is an extract from the Essbase Application Log:
[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
delay.
[2012-04-04T14:14:04.821-19:14] [RPA] [ESM-5] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure other processes do not
access Essbase files while Essbase server is running.
[2012-04-04T14:14:04.821-19:14] [RPA] [MBR-89] [WARNING] [1][] [ecid:1333566842161,0] [tid:2058170128] Unable to open
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for database
[RPA][2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database [RPA]
[2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
[2012-04-04T14:14:04.835-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
Please sugest pointers to start the application.
Thanks,
KK*[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file*
Solution would be easy ...like if the Essbase Agent is stopped using the services.msc (services panal)on Windows while a process is currently running, or if there has been an abnormal termination of the Essbase Agent, orphaned ESSSVR processes can be left. Shuting down the Essbase server using ESSCMD or MaxL then Check Task Manager confirm the ESSBASE.exe process later by this ESSSVR.exe processes should end if still NO then Do an "End Process" on any ESSSVR.exe process that is still running. Start the Essbase service and start the application.
ESSSVR.exe is process which keep application Alive (bad thing is if u have many applications running similarlly u have same numbe of ESSSVr .exe will be running in task master ..but u cant find out which one belongs to which application :( )
Reasons
looking at your error i can say , First of all you need to know what is Lock in EAS ? and what locks exist
(right-click on Essbase Servername, EDIT->LOCK and EDIT->LOCKED OBJECTS, and if your database/outline appears in there, unlock it.)
Check any antivirus- and backup software that may be scanning / running on your Essbase folders as that can lock the files and any ESSSVR process stays when the Essbase Agent is stopped
More over another chance of getting error is when you have you page and index files in different location and rest otl, rep.csc script in another drive .. usually while taking back up in OTL,csc drive u do get created index file and page file even u have page and index file in diffrent drive so doe to this u get this error unable to load database
Hope this give u some idea -
[SQLSTATE 22001] (Error 8152)Unable to open Step output file.
Hi,
I have configured the backups from our SQL Server instance to tape directly with out storing in the local drive, so that the disk space allocated for storing the backups in the local drive is saved.
but i end up with the below error.
Executed as user: CORP\devsqlservice. select DATABASE_NAME = db_name(sd.database_id) from sys.databases sd where -- ONLINE
sd.state = 0 and sd.is_read_only = 0 group by sd.database_id order by 1 [SQLSTATE 01000] (Message 0) String or binary data would be truncated. [SQLSTATE 22001] (Error 8152)Unable
to open Step output file. The step failed.
I am clueless , why i face this error, Do any one of you face such problems in backup (scheduled backups) job.
hemadriHi Hemadribabu,
>>”string or binary data would be truncated”
As my research, the error above could occur in the case of passing string or binary data, whose length is larger than received object. So I recommend you to run the Transact-SQL script in SQL Server query window to check if this kind of issue exists, or
you can post your entire script for further analysis.
>> “unable to open step output file”
In addition, as for the error above, this issue can be caused by two reasons below.
1. The path of the output file is invalid. To fix the issue, please follow the steps below.
a. Double click on the SQL Agent job.
b. Switch to Steps tab, and click Edit.
c. Click Advanced option.
d. Change the path under Output file or delete the path. For a UNC path, you can
map a network drive and use the network drive instead.
2. Your account doesn’t have access to the folder. Transact-SQL job step runs as the owner of the job step, or as the SQL Server Agent service account. So please check the type of the job step and the account which your job step runs as, and make sure that
it has access to the folder. For more information about the process, please review the similar thread:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/7610b484-98b7-42dc-816f-dbc884e84c6d/backup-database-permission-problem
Regards,
Michelle Li -
Mac Manager: Unable to open databases
I'm running the 10.4 upgrade and Mac Manager. I'm suddenly unable to open the MM admin program and am given the following error:
Unable to open databases on "OurServer" because of an unknown error: A disk error has occurred
I've tried rebuilding the databases by following the directions in Article 88023, but that hasn't changed anything. I still can't open MM and our users are unable to login.
Any help would be greatly appreciatedI have 5 buildings that are still using MM. We recently upgraded the servers from 10.2.8 to 10.3.9. When I try to admin MM on the 10.3 servers from my laptop with 10.4.7 I get an error, something like, unable to access database, folder not found.
However if I run MM admin from a 10.3 workstation it works fine. have you tried to admin MM from a different workstation?
iBOOK G4 Mac OS X (10.4.7) -
User unable to open Database in RSC 3.1
Hey Everyone
I've got a user whose unable to open a database in RoboSource Control 3.1. She receives no error and RSC just sits there like DB connection was never opened. She can open other databases.
I've tried different accounts on her machine and the database won't open for them either, but her account can open the database from other machines. I've repaired and uninstalled/reinstalled RSC but to no avail. I originally thought this to be a cache problem, but since it's affecting other accounts I'm no longer sure.
Has anyone seen something like this before?
Thanks!I am out of the office until 27-07-2009.
If you require assistance please contact the helpdesk at
[email protected] or +1 709 724 8529.
Thanks
Note: This is an automated response to your message "[RoboSource Control]
User unable to open Database in RSC 3.1" sent on 7/24/2009 8:43:06 PM.
This is the only notification you will receive while this person is away.
This e-mail may contain confidential information and the sender does not waive any related rights and obligations. If you are not the intended recipient please notify the sender and discard it. -
Unable to open RPD in Windows 8 (OBI 11.1.1.7)
Hello All,
I am unable to open RPD in Windows 8 (OBI 11.1.1.7).
Just the command prompt opens up and then hangs and end up with error.
[nQSError: 47077] NQSConfig.ini file was not found. Make sure your enviroment is set-up properly.
I installed 32 bit client but that did not work.
Can someone give me any pointer?
Regards,
KNcheck this
Error: nQSError:47077 Error When Installing OBIA 7.9.6.4 in OBIEE 11.1.1.7 (Doc ID 1549631.1)
Maybe you are looking for
-
Billing doc error due t copa standard quantity
Hi I am facing an issue .this is regarding the error while releaseing a billing doc the errortranslating the quantity to the COPA standard quatity. in material master i checked the unit of measure is SET and in copa KEA6 VVAUM( Alt Uom) Error transl
-
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run
-
Hi, I want to check if a member exists but I think I have an error in my script: m = member("titel." & group & "_" & pid) -- debugger says m = <void> if not(voidp(m)) then -- condition is true when m is <void>!? What am I doing wrong here? TIA
-
LabVIEW 8.0, Crystal report - PDF
Has anyone tried developing a crystal report, and calling it in LabVIEW 8.0 via .NET dll so it prints a pdf report similar to printing a standard report? Kudos always welcome for helpful posts
-
With the automatic addition of an update on both home & work computers, attachments went from being identified & opened as appropriate files, even when identified as .doc or .pdf, etc., all become .ashx (see details below)