Error of copy Movement type

When i want to copy a movement type from 551 to z55 for different scrap, I can not find z55 in the choose list in the transaction MB1A , but when i put the number in the field,it works.
How can i make it display in the choose list?

HI
Goto,   OMJJ -
> Movement types -
>  Select your Movement type -
> Go in to details -
> For your movement type....Go to  Allowed Transaction ....and pl. check there MB1A is maintained as allowed transaction...
Reward if useful
regards
S.Baskaran

Similar Messages

  • Error when using Movement type 561 both in MIGO and MB1C

    I am getting the following error when performing movement type 561
    Check table 003M: entry DB   does not exist
    I am using IDES system and learning SAP MM my self... i googled ans searched for this error and couldnt find a solution so please help me..

    Hi,
    WE document type not set for new company code, you are using.
    Set for WE document type for accounting document
    Again Use t.code: OMBA
    Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval. Now in next screen, click u201Cinsert intervalu201D
    & then enter
    u2026u2026u2026Number range numberu2026Year u2026u2026u2026......From Number .............................To Number.
    (For example)-----502011--
    5000000000u2026u2026u2026u2026u2026u2026u2026u2026. 5099999999
    And save.
    Again use t.code: OMBA
    Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWEu201D and you will have new screen and enter Number range u201C50u201D and save.
    Now use t.code: OMBA
    Click u201CGoods Receipt Document Typeu201D
    Next screen assign u201CWEu201D document type to MIGO_GR t.code and save.
    Regards,
    Biju K

  • How to copy movement types

    hello sdn users
    this is deepak
    did any one of u worked on a movement type which is copied from the standard
    how to copy movement types
    please help it was asked in an interview
    thanking u in advance

    Hi,
    Select the movement type and go to next screen. Give range as 101 to say Y01.
    then you can specify target mvt types between this range. You cannot specify new mvt type as Z01 in this case.
    hope it clarifies.
    Seema

  • Error in MIGO Movement type 101 E is not planned.(Entry is not copied over)

    Hie Experts,
    I had created a process order for XYZ material. Now i want to assign this goods receipt to sales order. For this i am trying to go MIGO with mvt type 101 & special stock indicator as 'E'(order stock). I am facing the error as "Movement type 101 E is not planned. (Entry is not copied over)".
    Can anyone help to solve this error.
    Regards,
    Piyush

    Hie,
    Thanks for your valuable response. But, my scenario is like this. I am doing goods receipts against PRODUCTION Order.
    I want to take this stock as Sales order stock(Special Stock).
    Can u pl help me for this scenario.
    Regards,
    Piyush

  • Copy Movement type - Urgent

    Hi,
    When I copy mvt. 309 and name it as z09 or 909 system giving me error message that
    Specify the key within the work area
         Message no. SV 033.is there any setting where I can define number range for mvt.
    Regards,
    Chetan.

    Hi
    Pl see this link may help you
    New movement type
    regards
    rb

  • Error UCD1038 regarding Movement Type after upgrade

    During testing for the BW upgrade and implementation of BPC, the SEM-BCS data collection resulted in an unexpected and unnecessary error: Maximum selection does not contain value 600 of subassignment Movement Type; Message no. UCD1038.
    Both before and after upgrade the task log shows Source records with the movement type but with no value in transaction currency, local currency and group currency. But after the upgrade these records also appear in the Target log where there had previously been excluded.
    SAP Note 1583871 was implemented without any noticeable improvement.
    The SEM-BCS data collection uses load-from-datastream with a source databasis that is virtual cube reading data from the ECC leading ledger. The source data is unchanged and before the upgrade the error did not occur.
    The SAP components before the upgrade are:
    SAP_ABA        700       0021 SAPKA70021     Cross-Application Component       
    SAP_BASIS      700       0021 SAPKB70021     SAP Basis Component               
    PI_BASIS       2006_1_7000011 SAPKIPYM11     Basis Plug-In (PI_BASIS) 2006_1_700
    ST-PI          2008_1_7000004 SAPKITLRD4     SAP Solution Tools Plug-In        
    SAP_BW         700       0023 SAPKW70023     SAP NetWeaver BI 7.0              
    FINBASIS       603       0003 SAPK-60303INFINFINBASIS 603                      
    BI_CONT        703       0016 SAPKIBIIQ6     Business Intelligence Content     
    SEM-BW         603       0003 SAPK-60303INSEMSEM-BW 603                        
    ST-A/PI 01N_700BCO 0000      - Servicetools for other App./Netweaver 04
    The SAP components after the upgrade are:
    SAP_ABA        701       0007 SAPKA70107     Cross-Application Component 
    SAP_BASIS      701       0007 SAPKB70107     SAP Basis Component         
    PI_BASIS       701       0007 SAPK-70107INPIBBasis Plug-In               
    ST-PI          2008_1_7000004 SAPKITLRD4     SAP Solution Tools Plug-In  
    SAP_BS_FND     701       0007 SAPK-70107INSAPSAP Business Suite Foundation
    SAP_BW         701       0007 SAPKW70107     SAP Business Warehouse      
    FINBASIS       604       0007 SAPK-60407INFINFINBASIS                    
    BI_CONT        704       0007 SAPK-70407INBICBusiness Intelligence Content
    CPMBPC 750 0006 SAPK-75006INCPMBPC CPM Business Planning and Consolidation
    SEM-BW 604 0007 SAPK-60407INSEMBW SEM-BW
    ST-A/PI 01N_700BCO 0000      - Servicetools for other App./Netweaver 04
    Any help resolving this are greatly appreciated.

    Hi Dan,
    This can be resolved by activating modification as suggested in the note 1074599.
    Suresh Jayanthi.

  • Copying Movement Type

    Dear Friends
    I want to create a good receive movement type copying 101. We want to do this for segregating  GR operation on the basis of MT.
    Can you tell me the deatails for creating a movement type and required assignments thereby?
    Thanks Chandra

    Hi Chandra.
    If you still want to create a new movement type.
    Tcode: SPRO -- Materials Management -- Inventory management and phy. inv -- Movement types -- Copy, Change Movement Types.
    Then select the relevant from the field selection list for that movement type.
    Then give the reference movement type in 'from' field and 'to' field will be ur new material number.
    Then everything will be copied from the reference mvt type, if anything is to be changed, change and save.
    Also go through the link [http://help.sap.com/saphelp_47x200/helpdata/en/a5/63319343a211d189410000e829fbbd/frameset.htm
    Regards
    Abhijit Gautam

  • Error when copying movie file

    I get an error when trying to backup an iMovie file to an external hard drive.
    Unexpected error occurred. Error code -1309.
    Wattsup w/ that??
    J.

    Yes, reformatting will unfortunately wipe out the contents of the drive.
    FAT32 has some limitations that make it not a good choice for storing movie clips. The biggest drawback is that the file size is limited to 2 GB, so if your movie clip is too long, you simply cannot store it on that drive.

  • Error: Master Copy for Type Definition Could Not Be Found

    See screenshot below please. The typedef is there (I navigated to it via windows explorer and it's not greyed out in the code), and my FPGA VI is not broken, which uses the exact same control. I also created these constants by right clicking and choosing create constant, so it's not as if I'm loading the wrong enum. Has anyone seen this before?
    CLA, LabVIEW Versions 2010-2013
    Solved!
    Go to Solution.
    Attachments:
    untitled.PNG ‏30 KB

    Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
    Here's what I did:
    Removed auto-populating folder from project (doubt this mattered, still broken after this)
    Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
    The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
    Just in case the names give any insight, they are:
    Older:  NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
    Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
    I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
    I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
    I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
    CLA, LabVIEW Versions 2010-2013

  • Error while copying a movement type

    Hi all,
    I want to create an movement type alternate to 501which will only update the qty not the value.
    1. For  this I have copied movement type 501 through t code OMJJ.
    2. While copying I changed the target movement type as "Y01".
    3. Selected the option of "Copy all dependent entries"
    Now i wanted to modify/delete some dependent entries to get the desired result, but unable to do so.
    such as in section "Update control / WM movement types" , I want to have only 3 lines and want to delete all other lines of special stocks, but unable to do so.
    Similarly with field "Account grouping", system not allowing me to delete any entries.
    Please suggest.
    BKR

    Hi,
    You just need to delete two items from the customizing view, go to next step, that will be okay!
    Regards
    Tao

  • GL assignment to the new movement type copied from101(GR of purchase order)

    Dear friends,
    user need another movement type copied from 101 due to diffierent GL assignment needed for the new movement type.
    while below is the only combination for PRD(cost (price) diffierences) is OBYC. and the first row is the current GL assignment for 101.
    My question is :  How do I  assign diffierent GL  for the newly copied movement type ,say Z01.
    General modification       Debit          Credit
                                         530000       530000
    PRA                              530050       530050
    PRF                               530000       530000
    Thanks in advance,
    Linda

    Hi,
    Go to t code OMJJ and locate your movement type Z01. Then go to  Account Grouping on the left pane  and create a new account modifier there. Then give the same account modifier in OBYC settings and assign the GL account against it. 
    Thanks,
    Atal

  • Movement type error for Service Processes

    Hi All,
    We are working on service scenario with CRM5.0 and R/34.6c.
    The problem that we face is as follows,
    Whenever we make a service confirmation with products with item cat group BANC the movement type is correctly determined as 261 but whenever our service confirmation contains the products with item category NORM, the R/3 system returns the error that the movement type 291 is not found for the business area.
    Regards
    Rekha Dadwal

    The error was due to the material type. We changed the material type and now it works fine

  • Movement type 651(copy Z651) make it reduce consignment stock like 632 does

    I copied movement type 651 to Z651 in order to have an inspection type attached.
    Now it needs to post the consigment stock (special stock W) like movement type 632 does.
    I cannot use 632 because it does not create an inspection lot.
    How can I make my Z651 reduce the consignment stock?

    Hi,
    Generally  by using movement type 651, you post returns from a customer with a return delivery in Shipping to blocked stock returns. Special stocks are not possible for this movemnt type and the special stock for consignment is K. Hence Z651 will not fulfill your requirement. Please use 632 and create inspection lot manually using the T-code QA01.Thanking you.

  • Movement type 561 and GL Account 24301000

    Hello guys,
    I am trying to upload inventory through MB1C but receiving following error:
    "field selection for mvmnt type 561 / GL AC 24301000 differs for settlement period (003)"
    Can anybody help me how to fix this.
    Thanks

    Hi,
    The field selection for Movement type 561 is not matching with the field selection of G/L AC 24301000. This is causing the problem.
    Go to Tcode: OMWB, in this transaction you can check the difference between the field selection of movement type 561 and G/L AC, then change the field selection accordingly in SPRO for movement type (MM - Inventory -- Movement types -- copy movement types and Tcode: FS00 -- input the G/L account and company code, press enter -- click on tab- create/bank/interest, double click on the field status group, then check the settlement period whether it is suppressed, optional, required in both cases. They should be same in movement type and G/L field selection.
    Hope this helps.
    Thanks,
    Viswanath

  • Movement type and Value string

    Hi,
    I have copied movement type 101 to Z02. Is it possible to change the value String from WE01 to something else. My purpose is to post to a different account instead of GRIR while MIGO for free goods. So please don't suggest me to change in OBYC as the change is going to effect every MIGO which we don;t want to happen. Any ideas?
    Thanks

    The value strings contain keys for the posting transactions that can       
    lead to G/L account updates in the case of an FI-relevant posting. These   
    value strings are predefined by SAP. You cannot change value strings or    
    the transactions they comprise in Customizing. For each of these posting   
    transactions, you can set up automatic postings in dependence on the       
    other influencing factors.                                                                               
    The value string controls the process of G/L account determination for     
    transactions/events of the movement type (see unit Valuation and           
    Account Assignment), whereas the quantity string controls the updating     
    of the material master fields.                                                                               
    In SAP R/3, the value string WA01 is assigned to various goods issues      
    and other goods receipts. Further differentiation in the automatic         
    account determination process for these different movements is             
    accomplished via the account grouping code.

Maybe you are looking for