Error of "File not found" while installing RAC

Hello Firends,
After succsssfully installing and running cluster manager on both the nodes ( it is 2-node Cluster), when I try to install oracle software, an error message window poped up stating the following message.
"File Not Found
/mnt/cdrom/Disk2/stage/components/oracle.pk2.proc/9.2.0.1.0/Datafiles/bin.1.1.jar"
Every time I ignore mesage it gives me another error message for differnt file name. So I stoped the installation.
According to this message it seems that there is no such file on the CD ( DIsk2) . I have a downloaded version of 9.2.0.1 from this site.
Please give me some suggestion on this.
Any type of response is highly appreciated.
Thanks
Bhsvin

Similar Messages

Error "Specifed Key not found" while installing Oracle 11g R2 db

Hi,
I am new to installing oracle 11gr2 DB. While installing at the stage of "install product" during the process of .Copy files its throwing the following error
*Specified Key not found
Please help me solving this problem. Your help is much appreciated.
Thanks in advance.

979400 wrote:
Hi ..
I am getting the "Specified Key not found" while installing Oracle 11 g r2 on windows 8 (64 bit) and below is the installation log , Please help me .
Number one - you are hijacking someone else's thread. Please read the forum FAQ. The link to that is conveniently located in the upper right corner of this very page.
Number two - no oracle product is certified to run on Window 8. If you want to run an Oracle product, you need to use an OS which Oracle has certified for said product.
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
     at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
     at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
     at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
     at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
     at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
     at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
     at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
     at oracle.install.commons.util.Application.startup(Application.java:869)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
     at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
     at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
     at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #-----------------------------
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:16
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
     at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
     at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
     at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
     at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
     at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
     at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
     at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
     at oracle.install.commons.util.Application.startup(Application.java:869)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
     at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
     at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
     at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #-----------------------------

Files not found while installing Oracle 9iAS Rel 2 on Win2K

Hello,
When installing Oracle 9iAs Release 9.2.0.1.0 on Windows 2000, the installation pops up windows 'File not found' for a number of files like -
jarfiles.1.4.jar, jarfiles.1.2.jar.
I checked out and the files are not avialable in the installation. The setup disks are proper.
What could be the problem?
Regards,
Mandar

The release date has slipped. We've found some issues which must be fixed before we can release on Windows. Hopefully we will have it soon.
I understand that there is a high level of anticipation. I appreciate everyone's patience.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management.

ERROR: OUI files not found at their expected location. while cloning 11.5.9

Dear Friends,
Getting error when cloning 11.5.9 from PROD to DEV:
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
I applied the patch 5035661 also but still the error exists.
Please let me know the fix.
[appldev@betestoracle bin]$ perl adcfgclone.pl appsTier
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Enter the values for the new APPL_TOP Context:
Does the target system have more than one application tier server node (y/n) [n] ?:
Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
Target system APPL_TOP mount point [apps/applprod/prodappl]:/apps/DEV/devappl
Target system COMMON_TOP directory [apps/applprod/prodcomn]:/apps/DEV/devcomn
Location of JDK 1.3.1 on the target system [usr/java/jdk1.3.1_10]:
The new context file has to contain port numbers related to target system.
Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:n
Clone Context uses the same port pool mechanism as the Rapid Install
Once you choose a port pool, Clone Context will validate the port availability.
Enter the port pool number:[0-99]
50
Checking the port pool 50
done: Port Pool 50 is free
Web Listener port is 8050
Complete port information available at /apps/DEV/devappl/admin/out/PROD_betestoracle/portpool.lst
Backing up /apps/DEV/devappl/admin/PROD_betestoracle.xml to /apps/DEV/devappl/admin/PROD_betestoracle.xml7.bak
Creating the new APPL_TOP Context file from :
/apps/DEV/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/apps/DEV/devappl/admin/PROD_betestoracle.xml
Log file located at /tmp/CloneContext_05131045.log
Please enter the APPS password:
apps
Running Rapid Clone with command:
perl ./adclone.pl java=/apps/DEV/devcomn/util/jre/1.1.8 mode=apply stage=/apps/DEV/devcomn/clone component=appsTier method=CUSTOM appctxtg=/apps/DEV/devappl/admin/PROD_betestoracle.xml
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
Starting application Services for PROD:
Running:
/apps/DEV/devcomn/admin/scripts/PROD_betestoracle/adstrtal.sh APPS/<appspwd>
Regards,
DB

ERROR: OUI files not found at their expected location.Please see these docs.
Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1] -- adcfgclone.pl appsTier fails with "ERROR: OUI files not found at their expected location"
Preclone DBtier Fails: Error: Oui Files Not Found [ID 739589.1]
Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite [ID 812294.1]
Application Management Pack for Oracle E-Business Suite Release 2.0.x Troubleshooting Guide [ID 412044.1]
Thanks,
Hussein

Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi. The program is built so a file dialog will pop up and ask for the destination of the file. Eventhough there is a file in the specified directory, an error is returned. Running open file+.vi by itself returns no error with the same file designation. Any clues?

noviceak,
Welcome to the NI Discussion Forums.
I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi). I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file? Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder. You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly. While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
I hope this helps and again, welcome to the community.
Regards,
Simon H
Applications Engineer
National Instruments
http://www.ni.com/support/
Message Edited by Simon H on 01-18-2007 08:01 PM
Message Edited by Simon H on 01-18-2007 08:03 PM
Attachments:
LV4 File Dialog.png ‏3 KB

Error 15 file not found.

I was able to install arch linux on a 2 GB flash drive. But I cannot boot into arch linux from the grub menu. I greeted by a message like "error 15 file not found"
my menu.lst file looks like
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
/etc/fstab file looks like
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
#UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
#UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
#UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
#UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
and result of #blikd is
/dev/sda1: UUID="edc30674-5e24-46ae-865c-647b5af6a1ca" TYPE="ext4"
/dev/sda5: UUID="8045e664-17ad-4bfd-8b5e-56d7f17fbcdd" TYPE="swap"
/dev/sdb1: UUID="aae9fb61-b5ec-40b5-a3dd-232c9a77f29b" TYPE="ext2"
/dev/sdb2: UUID="15eb5a8a-dddc-4b28-8183-f81d450b78d5" TYPE="swap"
/dev/sdb3: UUID="9157e8a3-c1bd-499a-95fe-524cd9c07d0e" TYPE="ext3"
/dev/sdb4: UUID="f1a9a9ad-8344-4eb5-be91-1af155c756e4" TYPE="ext3"

Here is the result of my fdisk -l /dev/sdb
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 100 102384 83 Linux
/dev/sdb2 101 356 262144 82 Linux swap / Solaris
/dev/sdb3 357 1533 1205248 83 Linux
/dev/sdb4 1534 1926 402432 83 Linux
Last edited by manish411 (2012-01-14 05:24:14)

Solaris 10 boot error 15 file not found

During a reboot to one of our solaris 10 servers when it reboots it comes up with this error message
Findroot (pool_rpool,0,a)
     Filesystem type is zfs, partition type 0xbf
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
loading '/platform/i86pc/multiboot -B $ZFS-BootFS' ....
Error 15: File not found
press any key to continue...
The grub file menu.lst content is as follows
#pragma ident   "@(#)menu.lst   1.2     10/06/11 SMI"
default 0
timeout 10
# Uncomment the following line to enable GRUB splashimage on console
splashimage /boot/grub/splash.xpm.gz
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Oracle Solaris 10 1/13 s10x_u11wos_24a X86
findroot (pool_rpool,0,a)
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
module /platform/i86pc/boot_archive
#---------------------END BOOTADM--------------------
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Solaris failsafe
findroot (pool_rpool,0,a)
kernel /boot/multiboot -s
module /boot/amd64/x86.miniroot-safe
#---------------------END BOOTADM--------------------
During a shell session using a recovery disk i mount the rpool to /a , if I do a zpool status it comes back that rpool mirror-0 with both disks are online
rpool          ONLINE
mirror-0      ONLINE
c0t0d0s0      ONLINE
c0t1d0s0      ONLINE
However if I do a zpool import it shows
rpool          UNAVAIL     insufficient replicas
mirror-0     UNAVAIL     insufficient replicas
     c0t0d0s0 FAULTED   corrupted data
     c0t1d0s8 UNAVAIL    corrupted data
This is highly confusing
Any help would be much appreciated

What's confusing to me is that the second disk in this mirrored root pool shows c0t1d0s0 in one output and c0t1d0s8 is another output. I hope this is a typo. Otherwise, you need to find out why this device path changed. Its look like the primary disk is faulted. FMA will tell you if the disk is faulted and whether the second disk's device path changed. You will have to boot from media or an install server.
Thanks, Cindy

IPlanet 6.0 and struts (Extension of file not found, while displaying stati

i am trying to launch the strut appln in iPlanet 6.0 when i am making a reqest for jsp i am getting a message saying Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content . i do not have any clue on this why i am getting this message.
Could anybody help me regarding this

Hello,
I am experiencing the same problem too. My jsp accesses a javabean. I
noticed, most of the times, I thought, it happened when session was timed
out. But it also happended before the time-out too. I had it set as default
at 30 minutes.
If you find out a solution or some high lights please let me know.
Thanks a lots.
ThuThien Ho
[email protected]
(703) 428-2856
Jordi Lucas wrote:
Hi all,
I have the following problem.
When I try to execute a jsp, the server responds:
Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content
This problem doesn't ocurred with all jsp's, it seems that only ocurrs
with the jsp's that call EJB's or JavaBean's.
Anyone has encountered with the same problem?
Any idea?
We are using Iplanet Application Server 6.0 SP3 and IPlanetWebServer 4.1
SP7.
Thanks in advance !
Jordi Lucas Essi Projects
Ingeniero de desarrollo
[email protected] t +34 977 221 182
http://www.essiprojects.com f +34 977 230 170

Preverify doesn't work. Always return error 2 "File not found"

Hello,
I have this configuration:
- Latest JDK and JRE
- Ubuntu Linux 7.10 64 bits
- NetBeans 6RC2 Mobility Pack
When I try to build a project, NetBeans returns:
Preverifying 6 file(s) into /home/alfredbaudisch/NetBeansProjects/GameBuilderDemo2/build/preverified directory.
java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
Then I downloaded WTK 2.5.2 by myself and tried to build it using the toolbar:
Creating project "GameBuilderDemo2"
Place Java source files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/src"
Place application resource files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/res"
Place application library files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/lib"
Settings updated
Project settings saved
Building "GameBuilderDemo2"
java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
Build failed Any suggestion?
Thanks.
Edited by: AlfredBaudisch on Nov 25, 2007 1:36 PM

The problem was that WTK was not accepting JRE 64-bits, then I installed JRE 32-bits and set up WTK to look for it.
I wrote an article about the platform Ubuntu + NetBeans 6:
http://mobiledeveloper.auriummobile.com/index.php/2007/11/25/perfect-java-development-platform-with-ubuntu-710-and-netbeans-6/
Edited by: AlfredBaudisch on Nov 25, 2007 6:47 PM

Grub Error 15: File not found

I am using Tobias Powalowski's 2008.10 archboot to install archlinux
everything seems fine, except with "setting password", and i skipped that.
after rebooting, grub comes up with an error 15: File not found
It appears that grub find /vmlinuz but not /kernel26.img..
anyone help? thank you.
Some information below
==== grub shows =======
root (hd0,0)
File system type is ext2fs, partition type 0x83
kernel /vmlinuz26 root=/dev/disk/by-uuid/06370655..91 ro
[Linux-bzImage, setup=0x3000, size=0x1be2e0]
initrd /kernel26.img
Error 15: File not found
Press any key to continue...

actually i find there is no kernel26.img in /boot/
ls /boot
System.map26 grub lost+found vmlinuz26
where can i get kernel26.img?

When I Update My Nano, I get error message, "file not found"

When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

Try these basic troubleshooting steps one at a time.
The Five Rs.

I am having a terrible time trying to convert my Quick Time file to an AVI file to use in a powerpoint presentation. Any suggestions? I am getting Error .43 file not found?

I am having a terrible time trying to convert my QT file to an AVI file so I can use in PowerPoint. I am getting Error 43 File not Found, any suggestions?

Hi Jenna,
The error your getting suggests a file path problem.
How are you embedding the movie in PP and where is the movie file located relative to the PP file? Are you getting this error within PP when the slide containing the embedded video is displayed?
If you embed a movie and then move it or change its name then PP will generate this error.
Alastair.

Error code "File not found Result code = -43" PLEASE HELP!

I keep getting this error message: "File not found Result code = -43" when trying to load instruments from the media tab. Does anyone know why this is happening and know how to fix this problem? I'm in the middle of a project and need help! Thanks.

So, I've narrowed down the problem to happening with the following steps (could someone possibly try this and see if the same problem is happening?)
If I load an instrument track and its blank and select a GARAGEBAND loop from the media list, I get the error message.
If I load a new instrument track and select any other instrument from the media list (besides a Garageband instrument) everything loads fine, AND THEN if I select a Garageband instrument from the list, it loads fine with no error.
If I select "No plug-in" in the channel strip after this, and try to load a Garageband loop, I get the error message and all other instruments from the media lists fail to load until I select "no-plugin" again from the channel strip and select an instrument from the media list BESIDES a Garageband instrument and then go from there (and can then load a Garageband instrument).
Is anything like this happening to anyone else? Does anyone have any ideas why this would be happening?

Run-time error 53 File not found (makes BI Publisher quite unuseable!)

Upgraded to BIP v 10.1.3.3.2
Open a template with the template builder
Load a source XML file
Proceed to choose Insert-> Field....
Microsoft message pops up:
Microsoft Visual Basic
Run-time error '53':
File Not Found.
This error, according to Microsoft and other technical sources SHOULD actually tell you what the file is that isn't found, however when run through the template builder, it never tells you any file name, just the above error message!
I saw one other post on this forum about this problem, and it was related to the Java Home, so I went to TOOLS-> OPTIONS and my java home there is:
C:\Program Files\Java\jre1.5.0_12
So this should be high enough JRE version.
ANy suggestions? What file or *.DLL can it not find? We have many people at a client (and me!) that have this issue.
-Greg

Pradeep,
I am not trying to utilize the desktop template builder to log onto BIP enterprise.
I am using it in an E-business suite environment, not a standalone BIP enterprise reporting environment. I simply use it right now to develop templates when I have valid XML to work with.
Many other features are working, but any features that seem to be new such as repeating group, conditional region, conditional format, the insert field palet, among others.
ANY feature that requires a .net service to be kicked off works only 10% of the time.

Getting error "Http 404 not found" while accessing CUCM GUI..

Hi,
Please help um getting error "Http 404 not found" while accessing CUCM GUI. Yesterday it was running fine bt nw its showing dis error.
Please find attached screenshot for ur referance.
Thanks & R's
Harish

Hi Aaron,
I have restarted dat service bt still the issue is persisting.
Now its showing attached error.
Thanks and R's
Harish

Error of "File not found" while installing RAC

Similar Messages

Maybe you are looking for