Error of LabView 2010 sp1 installed on win7 64bit

I installed LabView 2010 sp1 in a brandnew machine with 64bit Windows7.
During the process of initialize LabView, an error message coms out.
Could anyone help to solve this problem?
Thank you so much!
Attachments:
Error.png ‏45 KB

That appears to be a problem with your .NET installation, not LabVIEW. I'd suggest repairing or reinstalling your .NET framework.

Similar Messages

  • Building App Gives Error 6 about 50 - 80 - 99% of the time. Windows7, LabVIEW 2010 SP1

    Hi
    First off here is a link to a discussion of the problem.  http://forums.ni.com/t5/LabVIEW/Error-6-occurred-when-building-an-Executable-in-Labview-2009/m-p/997...
    I have tried all the suggestions on this link with no luck.
    Background:   have been using LabVIEW 2010 without problems since Sept, then I started getting the error 6 with the following message.
    " Error 6 occurred at Delete in AB_Engine_Delete_Internal_Files.vi->AB_EXE.lvclass:Build.vi
    ->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller "
    This started on one project and is now occurring on another project.  Sometimes it builds 50% of the time, other times I can't get it to build at all.  I have upgraded to SP1, no change.
    Here are some things I have tried.
    Moved build directory to c:\a
    Renamed project, moved project right under c:\
    Disabled Google , disabled Win indexing, disabled Win7 user acct. Control, run LabVIEW as Admit all the time, win explorer closed
    mass compiling, closing the project, closing LabVIEW, re-booting
    Unistalled LabVIEW 2010 SP1 and re-install, twice.
    I believe I rebuilt my project in a new project.
    I moved my projects to a WinXP system laptop I have, and they never get Error 6 !  Short term fix, but I have to use Win7.  So I hope this means it is not my code.
    The funny thing is that this is totally random.  The unfunny thing is having to explain to a client I can't get my code to compile during a frustrating 95% of the time failure episode, yikes!
    Any help and suggestions would be welcome.
    BTW, the next step is to totally uninstall LabVIEW with a 'special' procedure and piece of code sent to me.  Don't want to, but am really at wits end.  Also waiting to hear back from my service ticket, but am desperate to have parallel solutions to try.
    Thanks
    Mark Ramsdale

    Thanks for the clarify.
    I also meant to post this link.  It has a lot of info, this is the link I tried most if not all of the suggestions for.
    http://forums.ni.com/t5/LabVIEW/Get-Error-6-about-50-of-time-when-building-Application/td-p/1242634
    By the way, I was told that uninstalling LabVIEW will not resolve the issue, dodged a time killer :-)
    It seems the error is caused by Win7 and file reserving.  Waiting to hear back on that.  Have an SR.
    Again, any suggestions welcomed, maybe some Win7 ideas from those who know more about it.
    mr
    Mark Ramsdale

  • Labview 2010 SP1 - How to install just the labVIEW and remote panel

    Hi all
    I am currently using a licensed version of LabVIEW 2010 SP1. It came up with 6 to 7 DVD’s each of them containing around 5 GB of data. Installing all these stuffs eats up around 30 GB of ma C drive.
    My project just deals with 2 EPOS controllers controlling 2 of maxon EC motors and these 2 EPOS controllers are communicating via USB port with the client PC. This client PC have to be monitored and controlled remotely by host PC containing the same LabVIEW version.
    To do this, do I have to install all of these 7 DVD’s or just enough to download the “LabVIEW for education 2010 SP1” from the NI website, available in the below link “http://search.ni.com/nisearch/app/main/p/ap/tech/lang/en/pg/1/sn/n8:28,ssnavdl/”
    Awaiting for your reply  friends.
    Thanks in advance

    Duplicate Post

  • Labview 2010 SP1 silent install

    Hello,
       I have a student version of Labview 2010 SP1. I have located an article on how to perform a silent install using v2008 (http://digital.ni.com/public.nsf/allkb/AA2371E815A418DD86257169005F2D99?OpenDocument). I was wondering if anyone had a 'spec file' or silent install file for 2010 SP1? If not has anyone tried creating a .MSI using WinInstall?
    We are trying to push it out using Group policy to one of our small teaching labs. I was going to create a startup batch to accomplish this.
    Thank you
    ZoeTaite

    OK...after some reading I see you can generate a 'spec file' that will help with the silent installation of the Labview 2010 SP1 software via group policy. Is there a way to to modify the nisuite.xml to automatically register the software? Like I mentioned we are pusing this out to a student lab and I don't want to provide the SN (even though it comes up when you launch it).
    ZT

  • Labview complet 2010 SP1 installé mais ne démarre plus

    Après une période de non utilisation je m'apercois que :
    labview complet 2010 SP1 installé mais ne démarre plus parce que message demande disc: Ni labview run-time engine 7.1.1 ???????

    Salut abgs_fr,
    J'ai récupé ton projet et recréé ton executable...Sur mon poste cela fonctionne. Essai l'executable que je t'ai fourni en pièce jointe.
    Est ce que tu effectues l'exécution sur un poste possédant l'environment LabVIEW ou seulement le Runtime?
    Cordialement.
    JB 
    Jean-Baptiste C.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Téléchargez dès maintenant toutes les présentations techniques !
    Pièces jointes :
    Print.zip ‏1622 KB

  • Application crashes in Windows 7 64bit made in Labview 2010 sp1 f2 with Fault module name%3A lvrt.dll%2C version 10.0.0.4033 and exception code c0000005

    I build an application exe and then its installer along with run time environment.
    The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash. 
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AGMS.exe
    Application Version: 1.3.0.0
    Application Timestamp: 4c24e8f5
    Fault Module Name: lvrt.dll
    Fault Module Version: 10.0.0.4033
    Fault Module Timestamp: 4c9273f4
    Exception Code: c0000005
    Exception Offset: 00005310
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
    Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: Dell System XPS L502X
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
    Memory: 8192MB RAM
    Available OS Memory: 8106MB RAM
    Page File: 3457MB used, 12753MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
    Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
    Language: English (Regional Setting: English)
    System Manufacturer: LENOVO
    System Model: HuronRiver Platform
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
    Memory: 4096MB RAM
    Available OS Memory: 4010MB RAM
    Page File: 1359MB used, 6658MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
    This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
    Now as I see it, it could be a Run-time environment mis-match error.
    For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
    I checked DEP, for all 3 PCs and it was set to the following
    Turn on DEP for essential Windows programs and services only (first option).
    I am confused. I can not find a solution for this and it is really frustrating.

    But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
    Since from the picture you can see its including the support installers from '\Program Files (x86)\'
    The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
    I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
    Yes I did reboot every time after I ran the installation.
    Still getting the same error.

  • Can not Open exe file that is created by Labview 2010 SP1

    Hi Everyone,
    My Operating system is XP .. I installed .net latest version but I can not open exe file. I try to open  exe file, then  crashes , quits without seeing any interface.
    I tried with another computer whose o.s is xp too. I can open exe file. I saw it is created by Labview 2010 Sp1
    I dont know what the difference is. I attached config file. 
    Attachments:
    TPS65175 C (Vcom only).ini ‏1 KB

    burak35 wrote:
    [..]Do  I need any other components besides .Net? 
    That's a question only the provider of the application can answer.
    You could also take a look into the system event log if there is an indication for the reason of the application failing to start properly. It is possible that certain services are required for the application, but they do not run on the machine.
    Another point is possibly missing rights. So you might want to test the application once with the option "Run as Admin" (right click menu item on the application shortcut or the exe itself).
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • LabVIEW 2010 SP1: "Controls" pop-up palette "Select a control..." bug?

    I'm using LabVIEW 2010 SP1 (32-bit) and I noticed today that I cannot place my custom controls on a VI's front panel when I use the "Select a Control..." option on the "Controls" pop-up palette. I'm wondering if anyone else is having this same problem?
    Steps to reproduce the problem:
    1) Create a custom control, or download/save the attached custom control "Machine State.ctl" (< a strictly-typed enum control).
    2) Open a VI (new or existing).
    2.1) If the "Controls" palette is visible (pinned open), close it.
    3) Right-click with the mouse on the VI's front panel window to display the "Controls" pop-up palette.
    Note: DO NOT use the "Controls" option in the "View" menu here.
    Note: DO NOT pin open the Controls pop-up palette at this point.
    See my comments below in the "Notes" section.
    4) "Controls" palette > "Select a Control..." option
    5) Using the "Select the Control to Open" dialog, browse to, select and open the custom control file (e.g., "Machine State.ctl").
    At this point the on-screen cursor should show the outline of an instance of the custom control I just opened, but for me that doesn't happen; all I see is the "+" crosshair cursor, and left-clicking with the mouse on the front panel does not place an instance of the custom control on the front panel.
    Notes:
    * In step 3) above, if I open the VI's "View" menu and select the "Controls" option, or if I pop-up the "Controls" palette and pin the palette to keep it open, I can successfully use the "Select a Control..." option to browse to, select, open, and place an instance of my custom control on the VI's front panel. The failure only occurs when I use the "Select a Control..." option on the pop-up (unpinned) version of the Controls palette.
    * I can successfully drag-and-drop an instance of a custom control onto a VI's front panel from a Windows Explorer window, or from the LabVIEW project explorer window.
    * The host computer is running Windows 7 Enterprise x64 w/ SP1.
    Jim
    Attachments:
    MachineState.ctl ‏5 KB

    Just now I tried creating and using controls on five different computers, each running Windows 7 Enterprise x64 w/ SP1.
    On three of the systems the problem did not occur; I was able to place a user-defined control on the front panel using the "Select a control..." option on the controls palette.
    On two of the systems the problem still occurs. Upon further investigation, however, I learned that the hard drives in these two systems were cloned from a "master" hard drive image the IT department created. So I'm guessing there's some bad mojo on the master hard drive image, and that's what's caused this problem to show up on these two systems (and others).
    So for now, I'm just going to put up with having to use the old "drag-and-drop" method for placing user-defined controls on the VIs. Thanks for your feedback and assistance with this.
    Jim

  • Three way switch compaitable with labview 2010 SP1

    Hi,
    I am in need of three way switch  which is compaitable with  labview 2010 SP1.
    Plz help me ..
    thanks
    mahadev

    can u help me to upconvert the vi to LV2010. which manual are u talking abt?
    Attachments:
    3 position.llb ‏46 KB
    3switch.ctl ‏8 KB
    3switch.vi ‏16 KB

  • LabVIEW 2010 SP1 may not cleanly shut down

    Occasionally LabVIEW 2010 SP1 (32-bit, running on Windows 7) will appear to "hang" when the "Getting Started" window is closed.  The window disappears but the shortcut icon still appears in the Windows toolbar in the bottom of the screen.  Right-clicking and selecting "Close Program" does not work and Windows seems to think any VIs that have been recently closed are still open.  The program is still in the list in Task Manager and it can successfully be shut down all the way from there.
    This is more of an annoyance than an operational issue (I think) - is there something I am doing (or failing to do) that causes this problem? 
    Thanks in advance.

    Hello Unplugnow,
    Deleting the .ini file will not cause any issues in terms of being able to reload Labview it will simply restore the default settings for Labview which will insure that there were be no data corruption issues. I have tried this procedure on my side with no issue although I would recommend copying the .ini file to another directory in case you need to recover this information at a later time. 
    To another note, does this issue arise when you are opening a particular VI, or does it occur when you are simply opening and closing Labview?
    Best,
    Blayne Kettlewell

  • FlashCS4 Wont install on Win7 64bit

    Purchased Premium Suite - Trying to install on Win7 64bit
    Neither FlashCS4 nor PshopCS4 will install
    Gives a message stating simply cant install
    Gives instructions to reboot and try again
    Which I did
    Still does not install
    Any ideas why not?
    Any ideas on what to do now?
    Thanks for your attention

    The serial number is what determines the version of PS CS4 that is installed on your machine.
    It is impossible for PS CS4 to install the 64 bit version on Windows XP 32 bit machine.
    If you have a 32 bit OS machine PS CS4 will only install the 32 bit software.
    If you have a 64 bit OS machine PS CS4 will install both 32 bit and 64 bit software.
    Don't forget to install the .exe file installer file as Admin. Run the Disk but choose to explore the Disk. Find the PS folder and open it and right click on the .exe file and Choose to run as Admin.
    Turn off Windows defender prior to install. It is also better to turn off Adobe reader if it is installed (better yet, remove it) as it has caused PS CS4 install problems in the past for some unknown reason.
    To avoid problems install PS CS4 on C drive.
    Like I wrote above the serial number determines what is installed, not the Disk. You will know if you paid for the extended as it is almost 1 grand (the upgrade is cheaper).
    If you feel that you purchased the extended version but only the standard version installs you need to contact Adobe. Tell them hey, here is my receipt for Extended but the serial number you gave me is standard. This has happened before but nobody ever posted back saying the problem was corrected. 

  • Exchange 2010 SP1 install fails with -1603 error

    I am getting a -1603 error when installing Exchange 2010 SP1.  Installation fails when copying files/removing old version with the following error:
    [10/01/2010 23:17:06.0823] [2] Beginning processing uninstall-MsiPackage -ProductCode:'6574fdc2-40fc-405a-9554-22d1ce15686b' -LogFile:'C:\ExchangeSetupLogs\InstallSearch.msilog'
    [10/01/2010 23:17:06.0847] [2] Removing MSI package with code '6574fdc2-40fc-405a-9554-22d1ce15686b'.
    [10/01/2010 23:17:09.0400] [2] [ERROR] Unexpected Error
    [10/01/2010 23:17:09.0401] [2] [ERROR] Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
    [10/01/2010 23:17:09.0401] [2] [ERROR] Fatal error during installation
    [10/01/2010 23:17:09.0409] [2] Ending processing uninstall-MsiPackage
    [10/01/2010 23:17:09.0411] [1] The following 1 error(s) occurred during task execution:
    [10/01/2010 23:17:09.0412] [1] 0.  ErrorRecord: Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
    Does anyone know how to resolve this?
    Thanks,
    greg

    Hi Frank,
    I've the same problem when I try to install the SP2.
    When I try to install RU 4v2, 5 or 6, then comes error 2771. So I waiting for SP2 in the hope, a full install of the SP will fix this.
    But the setup broke with the following entries:
    [12.07.2011 19:51:59.0379] [0] Setup will run the task 'uninstall-msipackage'
    [12.07.2011 19:51:59.0379] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU''
    [12.07.2011 19:51:59.0379] [1] Die Active Directory-Sitzungseinstellungen für 'Uninstall-MsiPackage' lauten: Vollständige Gesamtstruktur anzeigen: 'True', Konfigurationsdomänencontroller: 'LicPDC.kh-lichtenstein.local', Bevorzugter globaler Katalog:
    'LicPDC.kh-lichtenstein.local', Bevorzugte Domänencontroller: '{ LicPDC.kh-lichtenstein.local }'
    [12.07.2011 19:51:59.0379] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU'
    [12.07.2011 19:51:59.0410] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
    [12.07.2011 19:52:04.0551] [1] [ERROR] Unexpected Error
    [12.07.2011 19:52:04.0551] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Schwerwiegender Fehler bei der Installation. Error code is 1603.
    [12.07.2011 19:52:04.0551] [1] [ERROR] Schwerwiegender Fehler bei der Installation
    [12.07.2011 19:52:04.0613] [1] Ending processing uninstall-msipackage
    The MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1' ist the SP1.
    Actual System: Server2008R2SP1 / Exchange2010SP1 RU3v3
    It is possible to solve this problem?
    Rene Hubert - Systemadministrator - DRK KH Lichtenstein gGmbH
    I too have this
    problem.

  • 6011 port error in labview (2010) while using a sit

    i want to transfer my signal from MATLAB (2010a) to LABVIEW 2010 using simulation interface toolkit, during transfering my signal i am facing a problem "unable to connect to the SIT server in the simulation environment" 
    error window is attached with a question.
    Attachments:
    10988823_934016639944737_1523643170_o.jpg ‏70 KB

    Hi,
    As my Simulation toolkit is still not working but when i first run NISITServer it shows this message ( attached in figure 1) when i run it second time NISITserver after doing some work on matlab or even when i make my mdl file (MATLAB) connection on labview through SIT connection and runs NISITServer it shows this message both times (attached in figure 2).
    What does these means? and how can i resolve these errors??
    I am trying an example given in a http://www.ni.com/white-paper/3057/en/ ..
    Attachments:
    11012228_942613192418415_1467660118_n.jpg ‏32 KB
    10405392_941226629223738_9044642262331052110_n.jpg ‏16 KB

  • "The server responded: 550 5.3.4 Requested" error with Outlook 2010 SP1

    Hi
    I set up an outlook.it account in Outlook 2010 SP1 64-bit to receive and to send E-Mail via POP3. Now, when I test this account, Outlook displays this SMTP error:
    The server responded: 550 5.3.4 Requested
    How come?
    Thanks
    Bye
    Balubeto

    Hi Balubeto,
    This error occurring because your account has blocked and in such scenario, you should firstly contact to your ISP (Internet Service Provider). Also check and use the accurate
    SMTP authentication so you can connect with your ISP or mail server.
    For more about 550 5.3.4 Requested,
    take the help from the given link: http://office.microsoft.com/en-us/outlook-help/troubleshoot-550-553-and-relay-prohibited-errors-HA001112833.aspx
    Note: Improve community discussions by marking the answers helpful.
    Thanks
    Clark Kent

  • Problems with Installer LabVIEW 2010 SP1

    Hi,
    I am trying to build an installer for an .exe using the project tool.  I can build the .exe, but I get the following error message when I try to build the installer:
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
    Loading product deployment informationAdding files to installerDone adding filesPreparing to build deploymentCopying products from distributionsCopying distribution 'NI-Serial 3.7' from: C:\National Instruments Downloads\NI-Serial\3.7.0\ to: D:\workspace\swarm\trunk\LabVIEW\builds\SWARM Analysis Viewer v1.0.1\SWARM Analysis Viewer v1.0.1 Application Installer\Copying distribution 'sapphire_sw_packet_reader' from: D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\ to: D:\workspace\swarm\trunk\LabVIEW\builds\SWARM Analysis Viewer v1.0.1\SWARM Analysis Viewer v1.0.1 Application Installer\Building deploymentCopying setup filesSetting merged database informationSetting product informationSetting developer part informationStarting final buildValidating... ***************** Error: An internal tool or library returned an error. (Error code -21)Error MessagesInput directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'MDFSupport.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.Input directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'EulaDepot.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_Web_Server_RTE_2010\LVRTEWebServer' not found for part 'NIWebServer_LVRTE.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Run-Time Engine Web Server {DB68B420-5382-48EE-9A2A-CB984FEBB192}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_RT_NBFIFO_2010\LVRT_NBFifo' not found for part 'LVRT_NBFifo_2010.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Real-Time NBFifo {2BC9B2CE-D569-4ADC-A8A0-170F2FD57139}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.
    ***************** Error Details:Error in MDF API function: _MDFBuildDist_BuildError List.\InputParser.cpp(255): IInstallerError 120Input directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'MDFSupport.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'EulaDepot.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_Web_Server_RTE_2010\LVRTEWebServer' not found for part 'NIWebServer_LVRTE.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Run-Time Engine Web Server {DB68B420-5382-48EE-9A2A-CB984FEBB192}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_RT_NBFIFO_2010\LVRT_NBFifo' not found for part 'LVRT_NBFifo_2010.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Real-Time NBFifo {2BC9B2CE-D569-4ADC-A8A0-170F2FD57139}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.While validating input parts.
    *** End Error Report************** Done building deployment
    Any ideas?
    Thanks.
    Bob

    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi Loading product deployment information Adding files to installer Done adding files Preparing to build deployment Copying products from distributions Building deployment Copying setup files Setting merged database information Setting product information Setting developer part information Starting final build Validating... Copying files... Updating files... Creating merged database... ************** *** Error: Windows SDK function returned an error. (Error code -12) ************** *** Error Details: Error in MDF API function: _MDFBuildDist_Build ERROR: Caught Windows Error: The operation completed successfully. Unable to CreateFile for MSI ReadStream target file *** End Error Report ************** Done building deployment
    I have same errors, plz see above, can anyone help?
    MJ

Maybe you are looking for