Error: Of material 8945868468, only 0.000 PC are available on desired date

Hi experts,
While creating Stock Transport order for storage location to storage location in the same plant. I am getting an warning message as "Of material 8945868468, only 0.000 PC are available on desired date", But the material is available in stock.
Even I am not able to create delivery in the transaction VL10B.
Please help me to create delivery and why is this warning message?
Regards
Adnan

Hi,
The warning message you are getting in STO Order is due to availability check.
Please check the availability check settings & also the above warning message doesn't prevent you from creating delivery.
Please check whether the Shipping tab is determined in your STO order & check whether you are getting any error messages in VL10B.
Thanks & Regards,

Similar Messages

  • Time Machine Error.  Backup is too large for the backup disk.  Backup requires 289.28 GB but only 177.01 GB are available.

    My Mac has not been backing up for some time.  Tried Apple Support, but couldn't figure out problem.
    Receive the following error...
    Time Machine Error
    This backup is too large for the backup disk. The backup requires 289.28 GB but only 177.03 GB are available.

    See #C4 in Time Machine - Troubleshooting.
    If that doesn't clarify the situation, post back with:
    How much data is on your internal HD (and any others being backed-up)?
    How large is your Time Capsule?
    Is there anything else on the TC besides these backups?  If so, what and how large?

  • Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g  when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

    Please let me know what I can do to get my Numbers (iWork 09) working properly again.
    Here is what is going on:
    Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers.   I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
    The document "Blank.nmbtemplate" is invalid.  The index.xml file is missing.
    I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists.  Since then Numbers is not working right.
    I'm sure it's something simple to fix, but I've tried re installing it and that didn't work.  Appreciate any help.
    Thanks
    AppMare

    There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

  • HT201250 This backup is too large for the backup disk. The backup requires 1.42 TB but only 998.49 GB are available.

    I am getting the error ¨This backup is too large for the backup disk. The backup requires 1.42 TB but only 998.49 GB are available¨ when I try to do a time machine backup.  I have a Retina Macbook Pro and am only using 250 GB on the internal drive.  My 1TB external drive that I am trying to use has been complete reformated (case sensitive journaled) and therefore completely empty.  Any ideas why time machine is saying my drive has 1.14 TB when its capacity is no where near that? 

    Well, at this point I might recommend that you reboot your MacBook Pro while simultaneously holding down the Command - R keys and booting into the Lion Recovery Partition.  There I would enter the "Disk Uility", highlight your Mac HD in the left hand column to select it and run "Repair Disk", and then run "Repair Permissions" twice.  They may resolve the hard drive's confusion in Time Machine.
    Hope this helps

  • The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available.

    I have a problem with my Time Capsule.  The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available. As a result, my backups are no longer running. My umderstanding was that the Time Capsule would automatically delete old backups to make space. Can anyone help me figure out how to get my backups to run again?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Re Time Capsule: I get this message:This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available. Any suggestions? Please.

    CAn anyone make some suggestions regarding this message. 'This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available.'

    See #C4 in this terrific document provided by expert Pondini.
    http://web.me.com/pondini/Time_Machine/Troubleshooting.html

  • Why only 9 partial deliveries are available in SAP?

    Hi experts,
    In SD, up to the maximum of 9 partial deliveries are allowed.. Why SAP has fixed only up to 9?.. Kindly help me out for this..
    Thanks in advance

    In SD, up to the maximum of 9 partial deliveries are allowed.. Why SAP has fixed only up to 9?.. Kindly help me out for this..
    It is not true. You can allow unlimited partial deliveries , please check F1 help for field KNVV-KZTLF:
    Partial delivery at item level
    Specifies whether the customer requires full or partial delivery for the item.
    Use
    You use this field to control partial deliveries at the item level. If the customer allows partial delivery, you can choose from different partial delivery options. For example, you can specify whether the customer allows you to make one delivery attempt only on the requested delivery date or whether unlimited delivery attempts are possible.
    When partial delivery indicator 'D' is set, the order can never have status 'fully delivered'. You must complete each item by entering a reason for rejection. This could be applied to scheduling agreements, for example.
    Dependencies
    You can enter a value in this field only if the customer allows partial deliveries for the entire sales document.
    (option "D" is unlimited partial delivery
    Please read F1 help fully!!!
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jul 15, 2009 9:09 AM

  • This backup is too large for the backup disk. The backup requires 1.09 TB but only 997.05 GB are available.

    1 tb drive 1 tb backup says too large?

    Correct.. TM needs about 20% free space to work.
    You need a 2TB disk.
    Just get a larger drive.
    Or exclude some of the things you don't need to backup. Although of course that is dangerous.

  • HT4628 The time machine has stopped working and I get this message about every 20 minutes while I am work. This backup is too large for the backup disk. The backup requires 104.9 MB but only 38.4 MB are available.

    Has any found a resolution for this problem?

    wittsjk wrote:
    Can I use this external drive with another one?  Or do I get rid of this one and just purchase one that is twice as big as the internal drive?
    I would reccommend buying another one. You need your Time Machine backups in one folder. You can always use the older one for backing up media etc,
    Cheers
    Pete

  • Hi, I bought iTunes Match, all the songs are available to stream over wifi however when I am on 3G only a few songs are available and the rest of them are blanked out and unavailable to stream. How do I Solve this? thanks

    Some songs are available but the majority are not.

    On the iPhone open Settings > iTunes and App Stores and set "use cellular data" to ON (green).

  • Webi error on Unx Universes only('getSessionInfosEX')API

    Webi error on Unx Universes only('getSessionInfosEX')API We are on BO4.1 SP2, Oracle11g I am getting error when I try to create webi report on unx universes only. I can create report on Unv universes without any error. Here is the error I am getting ('An internal error occured while calling 'getSessionInfoEX') API. I have created unx on Oracle 11g and I can run the query in IDT and can see data without any error. Not sure what could be the issue, any ideas? Thanks in advance.

    Hi,
    Based on your various threads, it seems like you are having numerous issues after you update, which suggests to me that something has gone wrong during the patching.
    Route 1 in such a situation would be to contact AGS support services.  Have you done that?
    regards.
    H

  • Edit Return Addresses - Invalid hostname. Only US-ASCII characters are allowed.

    On our two C series appliances the C350 and the C660 we can log in to the GUI and go to System Administration \ Return Addresses and change the
    Return Addresses for System-Generated Email to something more meaningful and practical then reports@hostname.  For example we like to use a proper suffix instead of @hostname we use @ourAwesomeCompany.com. Anyway on the M series the M650 we can't change the suffix East of the @ sign.  We get this error:
    Invalid hostname. Only US-ASCII characters are allowed.
    Did any of you, or can any of you change the Return Addresses on your M series?  You don't have to go as far as commiting the changes if you are willing to try this for me, just type something in and hit Submit that should be enough to generate the error.

    Hello,
    We have two M1060.
    When we tested the version 7.7.0-206 or earlier, we found the same problem as you by GUI.
    Recently, we're migrating to 7.9.0-107 and that is right now.
    So, you can migrate without fear

  • Parallel Processing: Error message 00-250: "No CUA area available"

    Dear colleagues,
    I have implemented a parallel processing with asynchronous RFC for a large data analysis in CO-PC. I think I was able to implement everything properly as described in the sap help: http://help.sap.com/saphelp_nw04/helpdata/en/22/0425c6488911d189490000e829fbbd/content.htm
    But now I face one problem: My jobs are often cancelled with the error message 250 of class 00 "No CUA area available".
    I don't have a clue what this error message means. I couldn't find any help in the SDN, OSS or in the internet. Has anybody an idea how to handle this problem?
    Thx very much for your help!
    Marius

    In your program while you doing the CALL FUNCTION - STARTING NEW TASK, did you check how many work processors are available.
    Suppose you have 40K data in your internal table, and in one step you are passing 4 K data. Then 10 work processes are required. But in your group setting if you have define 9, then last one will fail. So before any 'submit job in new task' or any 'CALL FUNCTION - STARTING NEW TASK' statement if have to check if any work processes are available. if available then submit otherwise wait.
    Thanks
    Subhankar

  • Only             0.000 ST of material 390 0159-833  available

    Hi SAP Gurus
    when I am creating a delivery w.r.t to the order its giving an eror "Only             0.000 ST of material 390 0159-833  available"
    And I have checked in MMBE the stock is available more than the order Qty
    Anyhelp is appreciable.
    Thanks in advance
    BR
    Venkat
    Edited by: venkat1259 on Oct 1, 2010 5:23 AM

    Hi
    As the reply given by Sandip,
    First I have seen VA05.......Pending sales orders, I found in my system 5 are pending and I deleted them as they are not needed and older ones.
    Second::>I checked in VL06OPending deliveries--
    I found 4 and deleted them also
    Finally----in MMBE there is no stock available for that material
    Through MB1C I posted the stock.
    After that the error got resolved.
    Sorry for late reply.
    Thanks&Regards
    Venkat

  • Dump Error In Material Master Transaction

    Dear Experts,
    When i am creating or changing any material master record, i am getting the below dump error while saving the material.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "SAPLC1AX " in include "%_CESPCL
         " in
        line 77:
        "Component called ATWRT already exists. ."
        The include has been created and last changed by:
        Created by: "SAP "
        Last changed by: "SAP "
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The following syntax error was found in the program SAPLC1AX :
        "Component called ATWRT already exists. ."
    Trigger Location of Runtime Error
        Program                                 SAPLC1F2
        Include                                 LC1F2U10
        Row                                     594
        Module type                             (FUNCTION)
        Module Name                             C1F2_SUBSTANCES_SAVE_TO_DB
    Can you please help me out with this?
    Thanks,
    Praveen

    Hi,
    I have not made any changes in the Enhancements/BADIS which are related to ATWRT, but created one ZTable for linking the
    Vendor (LIFNR), Material (MATNR) & Manufacturer (ATWRT).
    Here are the additional details of the dump which i am getting in MM01/MM02 transactions for your reference.
    Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of the dump
    Can you please help me with this?
    Thanks,
    Praveen
    Edited by: Rob Burbank on Feb 2, 2011 9:29 AM

Maybe you are looking for

  • How to use custom PAM module to unlock screen ?

    Hi, I actually use a custom PAM module for authentificate my users. This is working like a charm with sudo. I wanted to add it with the login screen, the one that everyone use. I added my config in /etc/pam.d/authorization and everything is working.

  • Problem with TOC levels (Bug?)

    Hi! Im using Layout -> Table of contents to generate the TOC for my magazine. My pages basically have two paragraph styles that will be used in the TOC window. They are Section and Tittle, and are defined as paragraph style and well syncronized with

  • Best Practices for Desigining Item Matrix in Retailing Like Garments

    Hi Please provide me with the best pracitices for designing Item Matrix in retail industry such as garment or shoe etc. Regards [Abdul Muneem|http://www.brio.co.in]

  • Managing more than one site in iWeb

    I've just created a new (second) site using iWeb. I want to edit my first website but, when I open iWeb, it opens my new site. How do I now get hold of my first (original) website to edit it? N.b. My first (original) site is still up and running on t

  • Installing on a macbook air.

    Ok so I bought Adobe CS6 about a year ago, and back then I owned a PC, since then i upgraded my laptop to a macbook air. question is... can i download CS6 to my macbook air if i still have then S.N.# from the first time i bought it, even though when