Error of status for specifications

Hi,
We have created the change number by tcode CC01 then created the specifiaction in CG02. Then uploaded the vendor MSDS by CG36VEN & then changed the specification status to "RELEASE".
After this we are trying to allocate the specification to work area by tcode CBIH02 then we are getting the error as "Only specifications in the status REL or ITU can be assigned to the work".
But actually we have already released the specification.
So please help us to resolve this issue.
Thanks & regards,
Pradip Shelke

Hello,
I ha ve try to do something more esaier. i ha ve take the example Acq&Graph Voltage-Int Clk.vi for write my application.
When I test my task with the example I have no error message.
Now, i have take the same come and I have change just the control "Measurement" with a control for xrite in a file. And when I test my application I have a error message "Internal software error - Did not receive acknowledge from CFDAQ eeprom Error Code: -223710"
I think I cannot write directly the data in the file. I must transform the array in string but I do not kwon how to proceed. Can you help me?
Thank you
Edta
Attachments:
lectureCarte.vi ‏41 KB

Similar Messages

Where see error and status for oracle 8.0.6

hi admins,
we looking for into tools oracle, what is for see general error and status database ?
thanks in advance
regards
Rodolfo

You see general error and status infomation in your alert log. This is the alert_<sid>.log file found in the directory specified by the parameter background_dump_dest.

RUNTIME Error - User Status for Order release

HI Friends,
Pls go thru the run-time error description,which i'm getting on Order release.Pls reply,.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          31.03.2008 13:16:08
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_250
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_250"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088"
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "SILDEV"
Network address...... "192.168.255.70"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x IA64 Level 3"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "SILDEV"
Database type..... "MSSQL"
Database name..... "DEV"
Database user ID.. "dev"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 3 2008 03:55:37"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 150
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 4889280
MM Free. 3487552
User and Transaction
Client.............. 250
User................ "PM5CHARL"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059"
Program............. "CL_SWF_RUN_WIM_LOCAL==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "DEV"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."C0A8FF46013847F096C00004"
Outbound Queue Name.." "
Client.............. 250
User................ "PM5CHARL"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "NONE"
Source Server....... "SILDEV_DEV_00"
Source IP Address... "192.168.255.70"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" -
in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 10
of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088".
Source Code Extract
Line
SourceCde
1
METHOD if_swf_run_wim_utl_internal~get_system_user .
2
DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4
TRY.
5
IF me->m_int_state-system_user IS INITIAL.
6
me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7
ENDIF.
8
re_user = me->m_int_state-system_user.
9
CATCH cx_swf_run_wim INTO l_excp.
>>>>>
MESSAGE ID     l_excp->t100_msg-msgid
11
TYPE   'X'
12
NUMBER l_excp->t100_msg-msgno
13
WITH   l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14
l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15
ENDTRY.
16
17
ENDMETHOD.                    "
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
X
SY-MSGID
SWF_RUN
SY-MSGNO
617
SY-MSGV1
WORKFLOW_LOCAL_250
SY-MSGV2
RFC_READ_DESTINATION_TYPE
SY-MSGV3
DESTINATION_NOT_EXIST
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080331
SY-UZEIT
131608
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
26 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM088    10
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
25 METHOD       CL_SWF_UTL_MAIL===============CP    CL_SWF_UTL_MAIL===============CM00J     5
CL_SWF_UTL_MAIL=>GET_OWNER
24 METHOD       CL_SWF_UTL_MAIL===============CP    CL_SWF_UTL_MAIL===============CM002    37
CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
23 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM0IE    38
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
22 METHOD       CL_SWF_RUN_WIM_STATE==========CP    CL_SWF_RUN_WIM_STATE==========CM021     7
CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
21 METHOD       CL_SWF_RUN_WIM_STATE==========CP    CL_SWF_RUN_WIM_STATE==========CM01V    12
CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
20 METHOD       CL_SWF_RUN_WIM_STATE_FLOW=====CP    CL_SWF_RUN_WIM_STATE_FLOW=====CM004     2
CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION
19 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM09A    72
CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL
18 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM0H3    16
CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS
17 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM04P     7
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS
16 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM011    12
CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR
15 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A    81
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT
14 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R    93
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT
13 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM008   144
CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION
12 METHOD       CL_SWF_RUN_WORKFLOW_START=====CP    CL_SWF_RUN_WORKFLOW_START=====CM016    42
CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM
11 METHOD       CL_SWF_RUN_WORKFLOW_START=====CP    CL_SWF_RUN_WORKFLOW_START=====CM002    33
CL_SWF_RUN_WORKFLOW_START=>EXECUTE
10 FUNCTION     SAPLSWW_SRV                         LSWW_SRVU13                           135
SWW_WI_CREATE_VIA_EVENT_INTERN
9 FUNCTION     SAPLSWW_SRV                         LSWW_SRVU11                            64
SWW_WI_CREATE_VIA_EVENT
8 FORM         SAPLSWW_SRV                         LSWW_SRVU11                             1
SWW_WI_CREATE_VIA_EVENT
7 FORM         SAPMSSY1                            SAPMSSY1                              271
XAB_RUN_DRIVER
6 FUNCTION     SAPLSXAB                            LSXABU01                                9
RFC_RUN_XAB_DRIVER
5 FUNCTION     SAPLERFC                            LERFCU01                              115
ARFC_EXECUTE
4 FUNCTION     SAPLERFC                            LERFCU02                              386
ARFC_DEST_SHIP
3 FORM         SAPLERFC                            LERFCU02                                1
ARFC_DEST_SHIP
2 FORM         SAPMSSY1                            SAPMSSY1                               85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
%_RFC_START
Chosen variables
Name
Val.
No.      26 Ty.          METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
RE_USER
222222222222
000000000000
000000000000
000000000000
L_EXCP
B0004000
90006000
SY-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
L_EXCP->T100_MSG-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
SWFCO_WIM_WI_FORWARD
SWW_WI_FORWARD
555554544554542222222222222222
377F79F6F271240000000000000000
000000000000000000000000000000
000000000000000000000000000000
SY-MSGNO
617
333
617
000
000
L_EXCP->T100_MSG+40(6)
617
333
617
000
000
SY-MSGV1
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+48(100)
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+148(100)
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+248(100)
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+348(100)
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No.      25 Ty.          METHOD
Name CL_SWF_UTL_MAIL=>GET_OWNER
RE_OWNER
%_DUMMY$$
2222
0000
0000
0000
ME->M_OWNER
%_VIASELSCR
0
4
ME
A0005000
E0001000
L_WORKITEM
60009000
3000C000
SY-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No.      24 Ty.          METHOD
Name CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
EX_SENT_TO_ALL
2
0
0
0
EX_MAIL_OBJECT
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
A0005000
E0001000
OBJECT_HD_CHANGE-ACNAM
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222222222222222222222222222
377F79F4930C19F6F2FD19C0000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
OBJPARB
Table IT_758[1x570]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB
Table reference: 224
TABH+ 0(20) = E06D6DEFF9060000000000000000000000000000
TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF
TABH+ 40(16) = 042A0200600B000010000000C1248401
store        = 0xE06D6DEFF9060000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 224   (0xE0000000)
label        = 758   (0xF6020000)
fill         = 1     (0x01000000)
leng         = 570   (0x3A020000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000046
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x80095FEFF9060000
pgHook       = 0x0000000000000000
idxPtr       = 0x0000000000000000
shmTabhSet   = 0x0000000000000000
id           = 540   (0x1C020000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
OBJECT_HD_CHANGE-OBJDES
Workflow 405090 set to status ERROR
56766667233333327672762776777245545222222222222222
7F2B6CF70405090035404F03414530522F2000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_FSREG_001
OBJCONT
Table IT_760[9x510]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT
Table reference: 225
TABH+ 0(20) = 106F6DEFF9060000000000000000000000000000
TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF
TABH+ 40(16) = 042A0200300B000010000000C1248401
store        = 0x106F6DEFF9060000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 225   (0xE1000000)
label        = 760   (0xF8020000)
fill         = 9     (0x09000000)
leng         = 510   (0xFE010000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000045
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x402D5FEFF9060000
pgHook       = 0x0000000000000000
idxPtr       = 0x0000000000000000
shmTabhSet   = 0x0000000000000000
id           = 541   (0x1D020000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
OWNER
222222222222
000000000000
000000000000
000000000000
SENDER
222222222222
000000000000
000000000000
000000000000
SY-SUBRC
0
0000
0000
SWFCO_MAIL_ERROR_NOTIFY
0002
3333
0002
0000
0000
OBJECT_HD_CHANGE
E          ERRORMESSAGEWorkflow 405090 set to status ERROR                00000000000000 F F S
4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_TYPE
RAW
545
217
000
000
SWFCO_OBJTYPE_BOR
BO
44
2F
00
00
No.      23 Ty.          METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
LT_AGENTS
Table IT_752[1x28]
\CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
Table reference: 207
TABH+ 0(20) = 806B6DEFF9060000000000000000000000000000
TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF
TABH+ 40(16) = 04180100E006000010000000C1248401
store        = 0x806B6DEFF9060000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 207   (0xCF000000)
label        = 752   (0xF0020000)
fill         = 1     (0x01000000)
leng         = 28    (0x1C000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000022
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0xA0696DEFF9060000
pgHook       = 0x0000000000000000
idxPtr       = 0x0000000000000000
shmTabhSet   = 0x0000000000000000
id           = 537   (0x19020000)
refCount     = 1     (0x01000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 2     (0x02000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
SYST-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28)
WS20000014
55333333332222
73200000140000
00000000000000
00000000000000
SY-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
FUNCNAME
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222
377F79F4930C19F6F2FD19C0000000
000000000000000000000000000000
000000000000000000000000000000
SWFCO_WI_REMOTE
R
5
2
0
0
PARAMETER-NAME
WI_ID
54544
79F94
00000
00000
SWFCO_CALLBACK_AGENTS
CALLBACKAGENTS
54444444454444552222222222222222
F31CC213BF175E430000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
PARAMETER-VALUE
000000405090
333333333333
000000405090
000000000000
000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID
000000405090
333333333333
000000405090
000000000000
000000000000
PARAMETER
807020C0
7080A050
00000000
00100010
LS_MAILOBJ
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME
60009000
3000C000
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
No.      22 Ty.          METHOD
Name CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No.      21 Ty.          METHOD
Name CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
IM_STATE_ACTIONS
Table IT_279[30x152]
\CLASS=CL_SWF_RUN_WIM_STATE_FLOW\DATA=M_STATE_ACTIONS
Table reference: 112
TABH+ 0(20) = 90CE53EFF9060000B04D6BEFF906000000000000
TABH+ 20(20) = 70000000170100001E0000009800000090010000
TABH+ 40(16) = 049A01007004000010000000C9248001
store        = 0x90CE53EFF9060000
ext1         = 0xB04D6BEFF9060000
shmId        = 0     (0x00000000)
id           = 112   (0x70000000)
label        = 279   (0x17010000)
fill         = 30    (0x1E000000)
leng         = 152   (0x98000000)
loop         = 400   (0x90010000)
xtyp         = TYPE#000009
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 1     (ItIndexLinear)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0xF0C453EFF9060000
pgHook       = 0xF0CE53EFF9060000
idxPtr       = 0x50E253EFF9060000
shmTabhSet   = 0x0000000000000000
id           = 207   (0xCF000000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 48    (0x30000000)
lineAlloc    = 48    (0x30000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x204C6BEFF9060000
collHook     = 0x0000000000000000
ext2         = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
SWFCO_WI_NO_DEADLINE
0000
3333
0000
0000
0000
L_OBJ
A0005000
D0002000
ME
A0005000
D0002000
ME->IF_SWF_RUN_WIM_STATE~NEW_STATUS
ERROR
455452222222
522F20000000
000000000000
000000000000
<%_L003>
ERROR
455452222222
522F20000000
000000000000
000000000000
SY-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_L004>
F
4
6
0
0
<STATE_ACTION>
FERROR       01DYN_SEND_ERROR_REPAIR_MAIL
4455452222222334545544454554555454455444422222222222222222222222222222222222
6522F200000000149EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L002>
<%_L002>-WI_STAT
SYST-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SWFCO_WI_STATUS_WILD_CARD
222222222222
A00000000000
000000000000
000000000000
<%_L002>-WI_TYPE
<STATE_ACTION>-METHOD
DYN_SEND_ERROR_REPAIR_MAIL
4545544454554555454455444422222222222222222222222222222222222
49EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
%_SPACE
2
0
0
0
LV_EXCP
F0000000
F0000000
No.      20 Ty.          METHOD
Name CL_SWF_RUN_WIM_STATE_FLOW=>

Hello,
Get help from your abaper on this.
Vinay

ME21N - in which table saved the release status for specific release code ?

and for the specific po number.

Hi
You will find all Release codes in T16FS
Release procedures are used in condition tables to control whether the condition types for these condition tables have to be read during pricing condition determination or not.
If the condition table status is released then only the condition types will be read during pricing determination. If the status is not released, then they can be used for information purposes or for simulation of pricing.
The release status is controlled by processing status too, which can be seen in condition record creation screen.
So in crux, the processing status with Release status help in simulation of pricing, blockign the condition records from being read during pricing etc.
For more information an F1 help on the following path will give you some more information.
SPROSD-BF-PRICING-DEFINE PROCESSING STATUS----Here read the documentation meant for this link. You will get some more clarity on this.
<b>Reward points</b>
Regards

One of the IDOCs has an specific error message (status 51 Idoc not posted)

Dear Experts,
ple. provide the solution for my issue.
In my list of compaines one of the company had an external partner(warehouse) who takes care of their products.
Communication between that external partner software and my system(PVS) is happen through IDOCs.
But one of the IDOCs has an specific error message ( status 51 and status text : Specification for units and quantites containe error),
acctually we are receiving picking meterials from the external system to my system.
I can able to see the Inbound Idoc and status, I am not able to see the Outbound Idoc, then how can I test why its happening this problem and I how can I give the analysis properly please suggest me.
Thanks in advance
Suresh

Suresh,
Welcome to SDN. Adding to Jürgen Comment, Just double click on status 51 (at node), then in next screen there will be one information (long text) button, just click on it. Some times it will give good details about the error. the information can also suggest direct trasaction to correct the customization, some times!
try for ur case.
Reddy

"Network-related or instance specific error", Works OK for Administrator

I've been handed a legacy .Net Windows application that was previously used on Windows XP, and asked to debug a few problems encountered on Windows 7 clients. The original developers are all gone. I'm down to only a single
error -- a seemingly common one:
"A network related or instance-specific error occurred while establishing
a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes
Provider, error: 40 - Could not open a connection to SQL Server)"
Curiously, this error only occurs for ordinary users. When the application is started using "Run as Administrator" it connects to the database immediately. We believe we can configure the app to always start as an administrator,
but obviously we'd like to run it without that if we can. However, I haven't seen any good suggestions why the database connection would only fail this one way.
Any ideas? I've seen at least one troubleshooting guide that suggested trying with Run as Administrator, but it didn't say how to proceed if that fixes it. Am I just supposed to stop at this point? If I was having a UI problem I might understand
that some old apps just aren't going to work in Windows 7, but this is just connecting to the database. Seems like we should be able to do this. I just don't know what to check.
Thanks in advance.
EDIT:
I have looked more closely at this, and perhaps there are more clues. I use the same user account to log on to two Win7 machines. One is a developer workstation with VS10 installed. The other is representative of a client workstation the app will
run on. My user account is actually an administrator on both machines.
At runtime we invoke advapi32.dll logonuser impersonation to logon to SQL server with a dedicated account.
What we're seeing is that I can run the app freely on the developer workstation. Even with UAC on, and even if I am not using "run as administrator". This may point to something about how the SQL drivers/provider are installed
on that machine.
When I run on the regular user workstation, even though I am an administrator myself, I must "run as administrator" to launch it. And when I do, I get a UAC prompt. When we turn UAC off, of course, the app runs fine.

Hi,
I think you are in the similar case with:
http://support.microsoft.com/kb/2009672
By default SSIS always uses the low privileged token resulting in a failure when connecting to a SQL Destination. Full administrator access token is required in your case.
Unlike earlier versions of Windows, when an administrator logs on to a computer running Windows 7 or Windows Vista, the user’s full administrator access token is split into two access tokens:
a full administrator access token and a standard user access token.
During the logon process, authorization and access control components that identify an administrator are removed, resulting in a standard user access token. The standard user access token is then used to start the desktop, the Explorer.exe process. Because
all applications inherit their access control data from the initial launch of the desktop, they all run as a standard user.
After an administrator logs on, the full administrator access token is not invoked until the user attempts to perform an administrative task. When a standard user logs on, only a standard user access token is created. This standard user access token is then
used to start the desktop.
To get around this, you may configure an application to always run elevated.
http://technet.microsoft.com/en-us/library/cc709691%28WS.10%29.aspx
Thanks.
Tracy Cai
TechNet Community Support

Error "No status object is available for Unknown Object " in Shopping Cart

Hi all,
We are getting error "No status object is available for <Unknown Object>" while creating shopping carts of any type .
Please suggest if any configuration setting needs to be done.
Thanks and Regards,
Navdeep Malik

Dear Navdeep
The error is likely caused by one or more entries in table BBP_DOCUMENT_TAB that are without objkey or guid.
did you delete some entries from SRM transaction tables?
Check table BBP_DOCUMENT_TAB entries to see any GUID which is not present in the system.
You can verify this by checking whether there is an entry in CRMD_ORDERADM_H (header) table
with GUID = <guid stored in bbp_document_tab>
Regards
Lauren

Unable to open delivery reports in Exchange 2013 SP1. Gives warning "The status for the recipient can't be determined because of a temporary error. Please try again later."

This seems to be occurring with all users (have tested a few, all display the same exact error message).
When I click on "Message Delivery Report" in Outlook 2010 or 2013, it points me to the ECP and displays this message "Warning The status for the recipient can't be determined because of a temporary error. Please try again later." I'm
not sure which log files to look at. The last time I remember it worked was before I applied SP1, I think CU3.
Our environment is two servers running Exchange Server 2013 Std. SP1 (847.32) in a DAG.
Thanks.

Hi,
From the error description, I would like to clarify the following thing:
Delivery Reports is a message tracking tool that you can use to search for delivery status on email messages sent to or from users in your organization's address book, with a certain subject. In Exchange 2013, you can track messages for up to 14 days after
they were sent or received. Please make sure the message you are tracking isn't older than 14 days.
Here is an article for your reference:
Track messages with delivery reports
http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1

Hi,
while uploading new rpd getting error message in enterpriise manger
Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1,chekced in the dignostic log found above mentioned error
what can be cause of the probelm
thanks

Hi,
1.Try using the sample rpd of it works, then the problem with the new rpd.
2. Restart the service once then upload the new rpd.
Regards,
VG

HELP - SWO1 - ERROR WHEN SETTING STATUS FOR RELEASED

Hi my friends,
I need to create a wf to PositionHR aproval.
I've already copyied the PDOTYPE_SH object to Subtype ZPDOTYPESH on SWO1 Tnx.
Now, I'm trying to set the object and methods status for "released". But SAP is giving me the following error message bottom:
- Please set required status for supertype first.
What can it be ?
tanks,
Glauco

Ho Glauco,
Check whether object PDOTYPE_SH is in Released status (it is not released in my 6.20 system). Check if you can set the status of ZPDOTYPESH to Implemented. You should be able to work with the object in Implemented status. I suggest that you post a message on OSS whether SAP recommends using the PDOTYPE_SH object since they have not released it.
Please post any future Workflow related questions in the Business process management (BPM) forum, the new home for Workflow.
Cheers,
Ramki Maley.

Set required status for all subtypes first error

Hello,
While implementing OSS note 1744002 for Application Control Workflow i had the following error.
In fact, i added a new attribute for BOR bus2201.
When i wanted to change the status to implemented, i got the following error 'Set required status for all subtypes first'.
Thanks,
Meriem.

Hi Meriem,
Any new attribute should be added to the newly created custom SubType of the Object type BUS2201, but not Object BUS2201 itself.
Revert the BOR BUS2201 to its original state and add the new attribute to your z<subtype>. You will no more get the error.
Regards,
Kiran

SMW00 separate action for specific error-code

Hello,
I know transaction SMW00 to send emails for bdoc-errors. Can I take seperate action for specific error-codes from specific organisational units?
Thanks for helping,
Bart

Hi Bart,
Using standard action handler it is not possible but one other option is to take a copy of RSMW0_CONFIG_ERRORHANDLER and enhance it to send actions based on organisational units.
Rregards,
Surendar

Error while scanning for Serial-ATA devices.

There was an error while scanning for Serial-ATA devices. I'm not sure how to trouble shoot this. I believe a secondary drive in bay 2 died.

I also have just began to hit this issue.
I have 4 2T enterprise class WD drives in a raid 1+0 (or was it 0+1) config.
Device Model: WDC WD2002FYPS-01U1B1
One disk (disk0 in bay 2) keeps disappearing. Completely. /dev/disk0 and /dev/rdisk0 vanish.
If I look at "about this mac" / "More Info" / "Serial-ATA" I get the "error while scanning ...".
If I reboot, the offending disc comes back and the raid volumes start rebuilding.
The SMART status is (reported to be) fine.
I use the 'smartmon' tools and look at the extended SMART status and the values of the counters all looks the same as the other drives. I can run an extended offline test, which takes forever to execute. disk 1 and 3 eventually finish with success (it writes this status into a SMART log area on the disc).
Disk 2 and 0 take longer. I image this is because 2 is being read to resilver 0. Currently, I am running with disk0 absent again, and disk 2s test did not complete. It claims it was aborted by the host, so I imagine the one on disk0 will claim the same after I reboot.
My system is under extended AppleCare until 16 Jan 2011, so if I can determine that this is a disc controller error, I can get it fixed. The drives have a 5 year warrantee, and are less than 1yr old, so they are covered. I just need to figure out what the issue is.
I will now reboot and recover disk0 and see if perhaps there is anything recorded in the SMART log.
There is nothing in kernel.log specific to disk0. I include the log extract here for posterity. The "speed" volume is not raid 0+1, just striped, which is why it gets aborted.
Dec 21 23:30:26 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 21 23:30:26 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 04:17:22 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 04:17:22 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:23:16 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:23:30 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:23:44: --- last message repeated 1 time ---
Dec 22 05:23:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:14: --- last message repeated 4 times ---
Dec 22 05:24:19 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:56: --- last message repeated 2 times ---
Dec 22 05:24:56 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:25:17: --- last message repeated 1 time ---
Dec 22 05:25:17 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:25:31: --- last message repeated 1 time ---
Dec 22 05:25:31 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:25:45: --- last message repeated 1 time ---
Dec 22 05:25:45 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:15: --- last message repeated 2 times ---
Dec 22 05:26:21 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:51: --- last message repeated 4 times ---
Dec 22 05:27:12 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:27:33: --- last message repeated 1 time ---
Dec 22 05:27:26 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:27:40: --- last message repeated 1 time ---
Dec 22 05:27:40 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:28:24: --- last message repeated 1 time ---
Dec 22 05:28:24 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:28:39: --- last message repeated 1 time ---
Dec 22 05:28:39 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:29:14 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76), member 3C6E9EA4-831A-4
57A-8CA5-6E7E9CBEED25, set byte offset = 222462894080.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::recover() member 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25 from set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76) has been marked
offline.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:32:38 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:33:22: --- last message repeated 1 time ---
Dec 22 05:33:22 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:06: --- last message repeated 1 time ---
Dec 22 05:34:06 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:53: --- last message repeated 1 time ---
Dec 22 05:34:53 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D), member 9722C38E-DFF9-4
68F-8DE5-809432493168, set byte offset = 35194773504.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::recover() member 9722C38E-DFF9-468F-8DE5-809432493168 from set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D) has been marked
offline.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 05:37:24 8way kernel[0]: AppleAHCIDiskQueueManager::setPowerState(0x13d64500, 2 -> 1) timed out after 100113 ms
Dec 22 05:37:44 8way kernel[0]: Failed to issue COM RESET successfully after 3 attempts. Failing...
Dec 22 05:37:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002be on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:37:44 8way kernel[0]: AppleRAID::recover() member EB932B0E-8476-480C-BBD4-53A9A77D9FEF from set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0) has been marked
offline.
Dec 22 05:37:44 8way kernel[0]: AppleRAID::restartSet - restarting set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0).
Dec 22 05:37:44 8way kernel[0]: disk4: media is not present.
Dec 22 05:37:59 8way kernel[0]: speed::terminate(kIOServiceSynchronous) timeout
Dec 22 05:37:59 8way kernel[0]: AppleRAID::completeRAIDRequest - underrun detected, expected = 0xa000, actual = 0x9e00, set = "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BB
E0)
Dec 22 05:37:59 8way kernel[0]: disk4: data underrun.
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: dojnlio: strategy err 0x5
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: end_transaction: only wrote 0 of 40960 bytes to the journal!
Dec 22 05:37:59 8way kernel[0]: disk4: media is not present.
Dec 22 05:38:00 8way kernel[0]: jnl: disk4: close: journal 0x13f34e04, is invalid. aborting outstanding transactions

SQL Server 2008 R2 Management Studio (express) install fails (Management Tools Basic Failed) - Error 1316. The Specific account already exists.

Hi,
I try to install, the SQL Express 2008 R2 with Advanced
The installation has only one error (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Start time: 2015-01-02 16:17:17
End time: 2015-01-02 16:24:01
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?
LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
Machine Properties:
Machine name: KHPNHSI_BNANG
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: g:\41bee43707e62fab54ec\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: g:\41bee43707e62fab54ec\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PSI\ssamnang
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SystemConfigurationCheck_Report.htm
Please help!
Samnang.

Hi SSamnang,
According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
use google drive to upload the error log following the steps in the article:
https://support.google.com/drive/answer/2424368?hl=en
From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
In addition, there is a similar thread for reference:
https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
Regards,
Michelle Li

FBL3N to BW report for specific GL's

Dear BW Experts,
I want to create report in BW for FBL3N for specific GL's, for open items.
I am done with development.
Report on standard DSO 0FIGL_O02 (0FI_GL_4)...
Simply GL in rows, with filter for open status.
Issue: Balance is not matching from ECC for one GL, because of one document,
which is closed in ECC but in DSO its still open (data is upto date in BW).
Thanks
Arun Purohit

I did re-load but without luck.....
that docment is there in BSAS(closed docs table) table not in BSIS (open docs table)...still ds 0FI_GL_4 shows that item still open....

Error of status for specifications

Similar Messages

Maybe you are looking for