Error on a input ready query

Hello SAP Gurus,
Can anybody advise on the following error of an input ready query?
u2022 Error reading the data of InfoProvider ZIPNA002 - Notification Number DBMAN 305
u2022 Error while reading data; navigation is possible - Notification Number BRAIN 289
u2022 System error in program CL_RSPLS_PLAN_DATA and form GETREQ_FREE-01- (see long text ) - Notification Number BRAIN 299
The query is based on an aggregation level (integrated planning)
The filter has a navigation attribute variable for the characteristic 0WBS_ELEMT__0PROJECT Project definition and in the line a list of 0WBS_ELEMT PEP elements should be displayed for planning.
We are with support package SAPKW70017 SAP NetWeaver BI 7.0
Thanks and best regards,
Patrícia

Hi Patrícia
first check in transaction SNOTE that there are no inconsistent notes (no lightning icons). If not, tell your basis team to fix it.
Then check in transaction SPAU that there are no inconsistent objects (everything must be green). If not, tell your basis team to fix it.
Next implement all notes that are listed as "side effects" in note SAP note 1101187 .
Finally, generate the plan query again in transaction RSRT. b
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

Syntax error when creating input-ready query

Hi,
When creating an input-ready query, I set the key-figure to 'Data can be changed by user entries or Planning Functions' in the Planning Properties in the query designer.
When I execute the query, I get the following error:
Syntax Error in : CL_RSR_RRK0_KEYFIGURE
In se24, the class has a syntax error in its Constructor method.
The error is not occuring when I change the Planning property to 'Data Cannot be changed' or 'Data can be changed via Planning Functions'.
Has anyone encountered such an error. If yes, how to proceed further?
Anything do with the the ABAP Patches. Currently I am in Patch13.
Thanks,
Balaji

Hi,
Plz apply the notes 1042924 and 1043103.After appling the notes regenerate the
query.
This should solve the error.
Regards,
Srikanth.

Error in Integradted Planning - Input Ready Query Design

Dear Gurus,
I am facing an error while designeing input ready query. I have created a query on Aggr. Level which is on Multi Provider.
I have 2 key figs. In my second key fig. I have restricted Planning Infor priovider with Plan version for version info object , Calender Year/month , and other info object of version , I have selected Variable for input.
When I am going to Planning tab of this key figure in change mode option I have selected Data Can be changed using user entries or Planning Functions. But my other options i.e. Disaggrgation and Type of Distriburtion are in the freezed state. That I can't select any of them. The system is giving Red hightlights and the highlight is showing error " Not Supported by Server"
Can you please advice me where is the problem ?
Regards,
B. Rajesh

Hi Rajesh,
This like would help you to resolve the issue
http://aiokeh.wdf.sap.corp:1080/SAPIKS2/contentShow.sap?_SCLASS=IWB_STRUCT&_SLOIO=C574D0123CD5DD44A8B271D6DADE8490&TMP_IWB_TASK=PREVIEW2&RELEASE=690&LANGUAGE=EN&_SEQNUM=253&_LOIO=4727759655EA6560E10000000A11466F&_CLASS=IWB_EXTHLP
Thanks and Regards,
Sateesh pasodi

Input ready query error

Dear all,
New to planning world, i have done everything told in the book in query designer to have an input ready query.
When i run that query in query designer, what should i expect?i have no data in the cube, so it says no data found .
However i am trying to make query have blank fields that i can edit with planning data.
any help ?
thanks

You can search for this too :-). Also, for new questions, it is generally better to open new threads.
For saving data, buttons need to be created with relevant commands. If you are executing the query in BI analyser (excel), you can also right click on the query and select 'save data'.

How to create an Input Ready Query in Bex Excel with no transact data

Hi
We created a query where we want the user to put in NEW LINES. This query has in general no data when user starts planning.
We have 2 front-ends for this, Bex Web and Excel. Both shows initial 'no data available
BexWeb': Implementing the command set_data_entry_mode we get all the relevant columns for the input
Excel: Command set_data_entry_mode or set_input_mode does not allow the users to insert new lines. Still error message pops up 'no data available'
Do you have a solution for that ?
Regards,
Thomas

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

Data from an Input ready query back into BW

Hi All,
One of the reports I am working on should allow users to write comments for each characteristic value (i.e in each row). I have toyed with different ways of doing it, but based on our company specific requirements, I have finally arrived at this design - Users enter comments in a column in an input ready query and the data is sent back to a real time cube.
However, I have never done this kind of stuff before. Can anyone please give me a step by step procedure of how to achieve this?
The most informative answer will be rewarded with the highest points.
Thank you.

I had already tried the document property in BI, but unfortunately it did not seem to work. This is the error I got when I did a right click on a characteristic value -> Documents -> Create new comment
u201CCannot determine the KM folder for storing documents with these types of propertiesu201D
u201CError while launching new document dialogu201D
http://img184.imageshack.us/img184/6505/docproperror1wg8.jpg
When I asked my basis team about this error, they had no clue what it meant and they thought it had to do with KM, and currently we do not have KM enabled in BI portal. Thats the reason why I had look for an alternative. However, I am pretty sure its not a KM issue because I believe "Characteristic is a Document Property" is a standard out-of-box BI property.
Do you know what that means and how to fix it?

Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

Input ready query / derived currencies

Hi all,
I have an issue regarding an input ready query with multiple currencies:
The query should enable the input of plan values for several reporting units, each with its own local currency. If I restrict the currencies using variables, I naturally get all possible combinations of currency and reporting unit as input ready. This allows the user to make wrong entries and is not very user friendly.
I wanted to restrict the currency using characteristic relationships but encountered several issues:
- Local Currency can not be chosen as attribute or DSO based characteristic relationship in the Modeler.
- when using a char. rel. based on CL_RSPLS_CR_EXIT (derive method) I receive the error msg "Cannot generate combinations in step '04'" everytime I restrict local currency to generate combinations based on char. rel. rather than master data in the query.
Do I have to implement the create method of the char. rel. exit? If yes is there some documentation available? Or could somebody give me an advise for an alternative solution?
Thanks,
Viktor

Hi,
I think this works out of the box.
Assume the characteristic 'reporting unit' has a currency characteristics containing the local currency as an attribute. Both, the 'reporting unit' and the currency characteristic have to be in the InfoCube and aggregation level used for the input-ready query. Create a characteristic relationship of type attribute containing the above characteristics and use 'access mode for result values' based on characteristic relationships for both characteristics in the query. But both characteristics e.g. in the rows of the query and you should only the valid combinations of 'reporting unit' and currency.
Regards,
Gregor

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

Input ready query and display only rows

I am trying to replicate scenario which is equivalent to creating manual layout in SEM-BPS with settings for layout category - Key Figures in Data columns, and rows defined individually. In this version it is possible to restrict certain rows as comparision only.
How can I acheive this using Input ready query? In my query I have created a strucure for Planning Items, but I am not able to show certain planning item selections as display only.
Any thoughts?

Hello Gregor,
Thanks for you answer.
I already have two structures as mentioned by you.
Can you please let me know what exactly you meant by set the input flag on the cell level? What settings I have to change to set the flag, do I have to use any formula? In my example I have three rows for Planning item row structure and I want only one row to be selected as display only row.
Regards,
Sachin

Key Figure in a Input Ready Query

I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE MODE turned off. But once I turn it on it is not showing any data for the key figure. This is happening only wiht that key figure, all the other key figures are working fine. Could someone help fixing this
Thanks
Rashmi.

Hi,
I do face this type problem during my BI IP implemenation project. Pls chk thoroughly the following points.
1.The planning mode of your real-time infocube should be on always on( you need change from load to planning mode, while inputting data).
2.The START QUERY IN THE CHANGE MODE , should be on.
3.In the planning tab of key figures, ensure you enable the button : Data can be changed using planning functions.
4.In the advanced tab of key figures, pls make sure to enable the right button( Master data).
5.Pls make sure , the real time infocube, aggregation levels, filters etc, should be refreshed & active,if make any changes in planning model in between, in Aggregation levels,filters etc.
6. Pls chk the locks( SM12) always, and delete all of them, if any.
7. Log-off the Server (BEX/DWWB) and restart the BEX ,then open your Input query, it should work .
Regards
CSM Reddy

Can we display comments row for row in Input Ready Query...

Dear All,
Currently I have created Web template with Signle Document. When executed it in the Portal it will come up with a "Save" and "Cancel" button of its own and can allowing me to capture comment here & Finally Click on SAVE button which was stored in Documents area in RSA1.
Now I am was trying to figure out to display comments Row for Row in Input Ready Query...
Can you give ideas on this...

Check link http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/frameset.htm
In query properties in BEx query designer you have to do settings to - Display document links
For metadata, master data, and InfoProvider data for a query, you can display links to Documents that you have created for these objects. If documents exist for these objects, the symbol appears next to these objects. If you click on this symbol, you jump to where the document is displayed on the Web.
Highlight the appropriate setting so that the document links for the desired document class are displayed. The document classes are oriented to the various categories of BW objects. InfoProvider data, metadata and master data.

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

Error on a input ready query

Similar Messages

Maybe you are looking for