Error On AddOn 64bit

Hi experts, a few days ago, was migrated Addons to 32bit to 64bit architecture
but in one fo they occurs thee next error:
Someone of you occurs the similar error, you can help me with this stuff.
Thanks!!
Best Regards.
Enrique

Hi Nagarajan!
Thanks for your interest in my question. Well...the error is the next:
"Unhandled exception at 0x000007feda0cadf0 in softwarename.exe: 0xC0000005: Access
violation reading location 0xffffffffffffffff"
About your observations, the Add-On is a development of thirds.
Thanks
Best regards.
Enrique

Similar Messages

Error during Addon Installation Index was outside the bounds of array

Hi wen im trying to install addon on x64 2003 server its throwing me error
Customer library
"Error during Addon Installation Index was outside the bounds of array."
"Error(-2) at EndInstallEx(False) at the end of the addon installation"
Please provide me a solution for this.
Thanks
Rekha

Hi Rekha,
You may check this: Add-on Installer Issue
Is this your add-on or SAP add-on? If it is 3rd party add-on, post it to the other forum
Thanks,
Gordon

[Solved] Error installing Flash 64bit from AUR

I tried installing the 64bit flash from here :http://aur.archlinux.org/packages.php?ID=21601, using 'yaourt -S flashplugin-alpha-64 10.0.d20.7-3'
It will say:
Downloading 10.0.d20.7-3 PKGBUILD from AUR
Error: 10.0.d20.7-3 not found in AUR.
So i tried another method by downloading this tar file from http://download.macromedia.com/pub/labs … .so.tar.gz
Then i untarred the file and on the desktop it shows 'libflashplayer.so'
So next i went to terminal, tried doing 'cd Desktop', followed by 'pacman -S libflashplayer.so', but it says i need to be root to do that. So i do 'su - ', and then 'cd Desktop', but it says '-bash: cd: Desktop: No such file or directory.'
How am i suppose to install flash64 bit? Thanks.
Last edited by Chance (2008-12-18 15:19:46)

Chance wrote:
I tried installing the 64bit flash from here :http://aur.archlinux.org/packages.php?ID=21601, using 'yaourt -S flashplugin-alpha-64 10.0.d20.7-3'
It will say:
Downloading 10.0.d20.7-3 PKGBUILD from AUR
Error: 10.0.d20.7-3 not found in AUR.
should be just "yaourt -S flashplugin-alpha-64" no version needed
the error is telling you it cant find 10.0.d20.7-3 which is not a package. did you get another error with the first part? or did you see it building the package?
i like building it by hand, so i usually (in a folder on my /home) i do
mkdir flashplugin-alpha-64
cd flashplugin-alpha-64
yaourt -G flashplugin-alpha-64 (to get pKGBUILD and other files)
makepkg (to build)
then install with yaourt -U [full package filename]
makes me feel like i'm in control
Last edited by toxygen (2008-12-18 04:56:50)

Timed Out Error with ADDON

Hi,
When i am running application it works properly.
But when i am developing ADDON . ADDON gets installed but while installation it display Timed-Out Error.
I tried increasing installation time but it do not work.
(i am using B1DE for developing ADDON)
Plz help to work this out.
Regards,
Ganesh

Hi ,
Marc Roussel
I have placed this question in portal.Ihave got solution also . Change i did was
my previous code of setconnection() contained following line
sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"

which was changed to
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)

and have placed connection string
0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056
to project propertie`s window of commandlineargument.
And it worked properly.
I am using SAP B1 2004.B and DOT NET 2005 version.
Hope it works.Do not forget to reply if problem solves.
Regards ,
Ganesh

Error during AddOn Creation using Xcelius AddOn Packager ver 2.1

Hi,
I get the following error when I try to build my add on usng the addon manager. Does anyone has a solution for this?
Regards,
bala.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
 at Packager.Util.OpenArchive(String filename, Int32 mode)
 at Packager.Package.generateXLX(String filename)
 at Packager.MainForm.buildToolStripButton_Click(Object sender, EventArgs e)
 at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
 at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
 at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
 at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
 at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
 at System.Windows.Forms.Control.WndProc(Message& m)
 at System.Windows.Forms.ToolStrip.WndProc(Message& m)
 at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
 at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
 CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
Packager
 Assembly Version: 1.0.0.0
 Win32 Version: 1.0.0.0
 CodeBase: file:///C:/Program%20Files%20(x86)/Business%20Objects/Xcelsius/SDK/Packager.exe
System.Windows.Forms
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
 <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hi,
I get the following error when I try to build my add on usng the addon manager. Does anyone has a solution for this?
Regards,
bala.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
 at Packager.Util.OpenArchive(String filename, Int32 mode)
 at Packager.Package.generateXLX(String filename)
 at Packager.MainForm.buildToolStripButton_Click(Object sender, EventArgs e)
 at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
 at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
 at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
 at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
 at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
 at System.Windows.Forms.Control.WndProc(Message& m)
 at System.Windows.Forms.ToolStrip.WndProc(Message& m)
 at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
 at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
 CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
Packager
 Assembly Version: 1.0.0.0
 Win32 Version: 1.0.0.0
 CodeBase: file:///C:/Program%20Files%20(x86)/Business%20Objects/Xcelsius/SDK/Packager.exe
System.Windows.Forms
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
 <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

After Effects crashes on startup - Various Errors - Windows 7 64bit

AE CC 2014 13.1.1
Windows 7 64bit
12 GB Ram
Intel Xeon CPR W3680 @ 3.33 GHz 3.33 GHz
Hyper-threaded 12 cores
NVIDIA Quadro 2000
After effects on startup crashes constantly on me. I get various errors, the newest is error code 1268; D_MCp_SetupExporterModule
Sometimes it is a dynamic link error, and sometimes there is errors.
If I actually get it to open and work, I'm usually OK until I close the program. At that point there is almost no way I'm getting back in without a reboot.
I've worked on this same machine for three years and had pretty good luck with every version of AE since 5.5.

If you're not on Service Pack 1 for Windows 7, you need to get it. SP1 is a minimum system requirement to run 13.1

Search Errors in Addons

My add-on although I have added the new version, without any errors and after a review,
ITS STILL DOESN'T DISPLAY in the Search results see attached for more information
https://addons.mozilla.org/en-US/firefox/addon/sinhalasearch-%E0%B7%83%E0%B7%84%E0%B6%BD-%E0%B7%83%E0%B7%80%E0%B6%B8-%E0%B6%BA%E0%B6%B1%E0%B6%AD%E0%B6%BB%E0%B6%BA/
thanks

Some customers setup monitors using a 3rd party tool such as HP Sitescope that would monitor the log file, but this would be a larger effort and cost. You could write a script to do this as well, but I would recommend finding the root cause of the errors. It is not normal for this error to occur.
Be sure to take regular search checkpoints to ensure you can quickly restore if you need to. How often does this occur? Are you sure that antivirus or backup software on the server is not locking any files in the search folder?

C310 photosmart premium runtime error windows 7 64bit

after extraction I get an arror message saying" runtime error" and will not complete the installation. windows 7 64bit.
ready to buy a new printer I am not that savy very frustrated.
Thanks for any help

Hello maxydog,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with a Run Time error.
So I can better assist you, please respond with your printers Model Number.
How Do I Find My Model Number?
Please feel free to write back when you have time.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Copy Express error on addon start

Hi all,
I am on B1 2005A pl 45 and I get the following error when starting the latest version of CE.
Entry Point Not Found.
The procedure entry point could not be located in the dynamic link library BFFFramework.dll
There is something about the UI in the error also.
I have reinstalled the client and I have confirmed that the DI is at the same patch as my client and I have checked the SM_OBS_DLL folder in Temp and all is fine.
Just cant get the addon to start. Can anyone help me!!??
Thanks,
John

Hi John,
As Peter suggested, it should be originated from ALD. Please firstly go through note 1029359.
If it still does not work, please clean remove and reinstall add-on by note 819501.
Hope it helps.
Regards,
Jacqueline Jiang
SAP Business One Forums Team

Error with Addons page

I am getting "error while downloading" while trying to install add ons, after having reinstalled, the add ons page now appears very basic with broken images but the navigation bar(ADD-Ons, Extensions, Plugins etc.) is'nt affected. What should I do?(And what is wrong?)
Thanks,
Ray

Rzay,
There is currently maintenance going on with the Addons page and the Firefox OS Marketplace page as of 15:00 PDT and is expected to last about 5 hours. Until then, AMO and the Marketplace will be in a read-only state. There was a bug report filed under [https://bugzilla.mozilla.org/show_bug.cgi?id=985473 Bug 985473] but I cant' view it since I don't have the permissions to. You can see the report on https://status.mozilla.org/en-US/detail/78/
You can see the status of addons.mozilla.org on http://status.mozilla.com/ showing Service Disruptions at the bottom for today (Apr 2)
'''EDIT: It seems to be working now as I can download extensions. Try it then report back to us'''

Error when addon runs on client workstation

Hi,
I have a problem with my addon running on a client wokstation. The addon is created using UIAPI and DIAPI.
It works fine on the server, but gives the following error on a client workstation.
"Activex cannot create object"
What is suspect is that this error is comming when i try to do the following
Set oDIComp = New SAPbobsCOM.Company
although i am not sure at this point of time.
Anyone ever got a similar problem.
Thanks.
Satish.

Hi Ad,
No i do not create any activex control.
There is only one object i try to create inside the function which is SAPbobsCOM.Company.
Set oDIComp = New SAPbobsCOM.Company
Apart from that no other object.
Regards,
Satish.

Error installing addon

hello
i have created my AddOn and i register it ok, but when i restart B1 and when the install of my addon begins , i'm getting an error message that , Add-On TestingAddOn(Add Name) Add-on %s-unintsall failed.
I find a solution in the forum, but it´s necessary have Visual Studio .Net and install B1DE but i have Visual Studio 6. How can i fix it??
Ricardo

MSS,
Please look at this post on SDN and specifically the last reply to download the B1DE Tools that will assist you with creating an installer.
Re: Installation of SAP Addon
HTH,
Eddy

BI Publisher - Install error - Windows 7 64Bit

Hi All,
I am trying to install BI Publisher on Windows 7 64Bit in a VMWare virtual machine.
OS: Windows 7 Professional 64bit
BIP Version: bipublisher_windows_x86_101341.zip
VMWare Workstation Version: 7.1.0
JDK Version: 6_21 (both 64 and 32 bit versions are installed)
Oracle DB: OracleXE
When I run setup.exe (in the install folder) the following is put into the log file:
Using paramFile: C:\BIPublisher\bipublisher_windows_x86_101341\Windows\Oracle_Business_Intelligence_Publisher_Standalone\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB. Actual 25444 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1999546068MB Passed
All installer requirements met.
The MSDos window then says "...please wait" and then a windows message comes up saying:
"Setup.exe has stopped working"
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     setup.exe_unknown
Application Version:     0.0.0.0
Application Timestamp:     459bb902
Fault Module Name:     StackHash_cb5a
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     00000000
Exception Code:     c0000005
Exception Offset:     00002022
OS Version:     6.1.7600.2.0.0.256.48
Locale ID:     1033
Additional Information 1:     cb5a
Additional Information 2:     cb5adf8f5bac4bc39db6c83fb76b8021
Additional Information 3:     b629
Additional Information 4:     b6294e8956d765fe790565edb94347ea
Any ideas?
Thanks
Patrick

Hi Pieter,
Thanks for the hints. However, the installation still fails with the same symptom.
I also tried it on a virtual machine that was set up with Windows XP (SP3) with no luck. Setup.exe fails to run and I cannot find anything useful in the log files that I can find.
The virtual machines that I am using are basic installs. I install the OS, JDK 32 bit and then BI Publisher. I just want a "basic" installation. Is there something missing?
By the way, I installed BI Publisher several years ago on a Windows XP 32 bit computer with no problems. I am trying to install this on a 64 bit computer, could this be the problem?
Any thoughts?
Cheers,
Patrick

CustomerLibrary error during AddOn installation

Hi experts,
below the event viewer application entry:
Tipo evento: Errore
Origine evento: .NET Runtime 2.0 Error Reporting
Categoria evento: Nessuno
ID evento: 1000
Data: 09/12/2009
Ora: 16.00.20
Utente: N/D
Computer: SAP
Descrizione:
Faulting application msiexec.exe, version 4.5.6001.22159, stamp 480573de, faulting module ole32.dll, version 5.2.3790.3959, stamp 45d71faa, debug? 0, fault address 0x00034002.
Per ulteriori informazioni, consultare la Guida in linea e supporto tecnico all'indirizzo http://go.microsoft.com/fwlink/events.asp.
Dati:
0000: 41 00 70 00 70 00 6c 00 A.p.p.l.
0008: 69 00 63 00 61 00 74 00 i.c.a.t.
0010: 69 00 6f 00 6e 00 20 00 i.o.n. .
0018: 46 00 61 00 69 00 6c 00 F.a.i.l.
0020: 75 00 72 00 65 00 20 00 u.r.e. .
0028: 20 00 6d 00 73 00 69 00 .m.s.i.
0030: 65 00 78 00 65 00 63 00 e.x.e.c.
0038: 2e 00 65 00 78 00 65 00 ..e.x.e.
0040: 20 00 34 00 2e 00 35 00 .4...5.
0048: 2e 00 36 00 30 00 30 00 ..6.0.0.
0050: 31 00 2e 00 32 00 32 00 1...2.2.
0058: 31 00 35 00 39 00 20 00 1.5.9. .
0060: 34 00 38 00 30 00 35 00 4.8.0.5.
0068: 37 00 33 00 64 00 65 00 7.3.d.e.
0070: 20 00 69 00 6e 00 20 00 .i.n. .
0078: 6f 00 6c 00 65 00 33 00 o.l.e.3.
0080: 32 00 2e 00 64 00 6c 00 2...d.l.
0088: 6c 00 20 00 35 00 2e 00 l. .5...
0090: 32 00 2e 00 33 00 37 00 2...3.7.
0098: 39 00 30 00 2e 00 33 00 9.0...3.
00a0: 39 00 35 00 39 00 20 00 9.5.9. .
00a8: 34 00 35 00 64 00 37 00 4.5.d.7.
00b0: 31 00 66 00 61 00 61 00 1.f.a.a.
00b8: 20 00 66 00 44 00 65 00 .f.D.e.
00c0: 62 00 75 00 67 00 20 00 b.u.g. .
00c8: 30 00 20 00 61 00 74 00 0. .a.t.
00d0: 20 00 6f 00 66 00 66 00 .o.f.f.
00d8: 73 00 65 00 74 00 20 00 s.e.t. .
00e0: 30 00 30 00 30 00 33 00 0.0.0.3.
00e8: 34 00 30 00 30 00 32 00 4.0.0.2.
00f0: 0d 00 0a 00 ....
can anyone help me to understand what's happening?
thanks
Best regards
Andrea

applied the workaround as Robin Vaughan wrote in Thread: Add-on Installer Issue

How to avoid the attach error in sparc(64bit) driver complied with GCC

If you want to avoid the error,failed to attach in sparc 64 bit driver ,
you must add the flags .as bellowing.
CC = /usr/local/bin/gcc
LD = /usr/ucb/ld
GCCFLAGS = -m64 -mcpu=v9 -fno-builtin
CFLAGS = -O $(INCL) $(GCCFLAGS) -D_KERNEL -D_SYSCALL32 -Wall
Ms. Anda
MSN:[email protected]

Vini160409, You totally Rule!
I noted just one brief update: I am using Access 2007, and my database has the suffix .accdb. That uses a slightly different driver than the one described in your (very careful) instructions; fortunately, it was also available in the drivers in the program odbcad32.exe in the System 32 folder, so it was available to me when I added the new database from within the SysWOW64 folder. This fix allows me to use LiveView with a ColdFusion site from within DreamWeaver. Thanks much for making this public!

Error On AddOn 64bit

Similar Messages

Maybe you are looking for