Error on Airport Express when using to extend Airport Extreme Base Station

I have had continual problems trying to get my Airport Express (n) to extend my Airport Extreme Base Station. The signal it is receiving is "good". The settings are correct (as far as I can tell) and it was working for a brief period of a month or so.
Now it is not working and I have a red 1 in a circle (like an update is needed... but it will not take me to an update) on the Sirport Express in my Airport Utility.
Under "Status", it says "Extended Network" with a green crcle, but the main circle on by the name is flashing green, and will not send a signal.
Also in "Status", it says this: "This AirPort base station was unable to extend the wireless network. Make sure the wireless network you're trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network."
I have done all of those and yet..... STILL not working. Ugh.
Any thoughts? Procedures?
Thanks in advance.

At this point, I would suggest that you perform a "factory default" reset on the AirPort Express. In its default mode, the Express will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN.
Your Mac should recognize that there is a "new" AirPort Express present. You will find this on the dropdown menu from the AirPort icon on the OS X menu bar. Select the Express from the dropdown menu and the AirPort Utility should automatically start up to allow you to configure it.

Similar Messages

Can my Airport Express be used to extend the signal for an iPad2

I am using a Linksys wired router as the beginning of my home network. There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network. I have an iBook on the other side of the wall and about 10 feet and an iMac about 20 feet with one wall in between. These two have some fluctuation in their signal but only between 4 bars and 3. I just got an iPad 2 and it is causing me grief because it struggles to maintain a connection just another 10 feet from the iBook. If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router. That kind of defeats the purpose of buying an iPad. So, my question is how to rearrange the network so the iPad is happy in the living room where I mostly use it. I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room. Right now the Airport is wired to the router. Is this necessary for it to be a part of the network? I know I can use it to get music from iTunes to speakers but would that placement also work as a wireless extender? Would just buying another router for the Xbox location and putting the Airport there also be a better solution?

ladybastet, let's clean up some terminology. You should designate only one router for your network. At present that is the Linksys. Your wireless access point is the Express, and it gets its network connection from the Linksys. Is that correct?
If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router.
Now that you know your Linksys is the router, is the above correct? Unless the Linksys is also a wireless access point, the iPad's proximity to it will not matter. Only its proximity to the device creating the wireless network is a factor. In your case, I believe that is the Express.
There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network.
I'm not sure I understand. Is one Ethernet cable going to two places? What is it connected to, precisely?
Right now the Airport is wired to the router. Is this necessary for it to be a part of the network?
In the case of a wired router, yes.
I'm wondering if you have things configured properly, particularly if you have configured the iMac to share its network connection over AirPort. I'm even wondering if your iPad has unintentionally joined a neighbor's wireless network.
I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room.
Using the iMac to share a wired Ethernet connection to create its own wireless network is certainly possible, but it is less than ideal. For one, the iMac would have to be powered on all the time.
You do not need or want another router.
It is impossible for me to be certain of your network environment (meaning, the size and configuration of your home, the proximity of competing wireless networks, the number of network devices, and the potential for interference) but you might be better off replacing the wired Linksys router with an AirPort Extreme. That would give you the ability to create a "roaming network" or to use your Express to extend the Extreme's wireless network. I think this would be the easiest solution, but given the uncertainly of your description this expense may not be necessary.
Much of my confusion stems from your original question: "Can my Airport Express be used to extend the signal for an iPad2" - the quick answer is yes, but a prerequisite question is, "what signal?" The only "signal" I can determine that may be relevant is the one created by the Express. Once we have the terminology fixed, perhaps we can fix what's wrong with your network.

Airport Utility can not find air port extreme base station

I am running XP home on my computer and have an air port extreme base station connected to it wired. I have no problem connecting to the internet yet more times then not the air port utility can not find the base station. On occasion it will find it but most of the time it can not. Rebooting does not help.

I recently purchased one of the new Airport Extreme base stations and after carefully reading the instructions; I first installed the Airport Utility 5.5 that came on the CD onto my MacbookPro. I then connected the new base station to my macbookpro via Ethernet and power it up. I copied a previously saved configuration onto it. All my printers, IMAC and macbookpro were able to connect.
I then used my older base station and my airport express to extend the N and G networks through the house. My problem was (1) the new Airport utility would consistently lose the older extreme base station and the airport express, (2) An my HP printers keep losing the wireless connection to the new airport extreme base station. The only resolve was to consistently restart the new base station, after which (1) the new airport utility would see the older base station and express again and (2) the wireless connection to the printers would be restored.
After about a week of this, I removed the new Airport Extreme and replaced it with the older extreme (802.11N DRAFT) and de-installed the Airport Utility 5.5 and re-installed Airport Utility 5.4.2 and everything works fine.
Has anyone else experienced any problems with the newly released Airport Extreme (fully 802.11N) base stations and Airport Utility 5.5?

Can airport express be used to extend a network that does not use an apple airport as the primary base station.

I have a verizon fios cable modem that incorporates a wireless base station using 802.11n and wep 40 bit security. I decided that I could improve poor reception by using two airport expresses as range extenders. I cannot seem to configure them for this function. When I do a manual setup and choose extend a network, I get a message that says the network cannot be extended. I have been able to join the network, and I think they would work as clients, but I'm trying to use them in as additonal base stations to extend my network.
The primary base station, and the two airport express units are all within range of each other.
Now that I have the two units (purchased on sale from Apple this past week), the directions in the manual only include instructions for using them as network extenders with a primary basestation that is Apple? Is this the case?

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your non-AirPort router can be extended wirelessly with the AirPort Express Base Station (AX).
Your only option would be to connect the AX to the Verizon-provided gateway by Ethernet or use Powerline adapters to create a pseudo Ethernet connection between them. A wireless-only connection will not work.

Can an Airport Express be used to extend the range of my Comcast wireless gateway?

We recently moved to a big old brick and stone farmhouse. When Comcast came they installed their new wireless gateway. Unfortunately the construction of my house is pretty solid. It effectively blocks the signal at the far end on the second floor. I've been trying to use an Airport Express, newest model, to extend the range of my network. Using the Airport Utility, it seems like it connects but the signal is no better. Does the Airport Express only work as a range extender on Apple wireless devices, or am I missing something when I use the Airport Utility to set up the extended network?

The AirPort Express can extend the wireless signal from the Comcast gateway if it is permanently connected to the gateway using a wired Ethernet connection, and the Express is configured to create a wireless network using the same name and password as the Comcast wireless network.
The Express cannot wirelessly extend the signal from the Comcast gateway, since the wireless "extend" feature will only work with other Apple routers.
The Express can "join" the wireless network provided by the Comcast gateway for use with AirPlay or a remote printer at the USB port, but when the Express "joins" a network, it does not provide any additional wireless signal coverage in that setting.

My internet works fine with my wired cable modem, but when i connect to my extreme base station and setup my wireless network the internet no longer works and my apple tv by default

my cable modem works fine, but when I hook it up to my extreme base station and run through the prompts and set up my wireless network it doesnt work and neither does my apple tv by default. I am unsure how to correct this problem. It will come up saying that I dont have an IP address when I have it set to DCHP so I dont know what the problem is.

Push the reset button on the modem and power the modem off
Power off everything else....all devices....order is not important
Wait 15-20 minutes or longer
Connect the Ethernet cable from the modem to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run for 5 minutes by itself
Power up the AirPort Extreme and let it run for 5 minutes
Power up each other device one at a time a few minutes apart
Check the network

I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

I have the airport express as router can I buy the new airport express and extend my net?

Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

Can an Airport Express be used to extend the range of an existing Airport Extreme?

I would like to extend the range of my existing Airport Extreme. If I connect an Airport express to my existing network will it rebroadcast the WiFi signal and therefore exrtend the overall range?

If I connect an Airport express to my existing network will it rebroadcast the WiFi signal and therefore exrtend the overall range?
The AirPort Express 802.11n can do this if it is located where it can receive a strong signal from the AirPort Extreme in order to "extend" it.

Airport express will not show up as a base station in Airport utility

I just got Quest service and also Airport express. I hooked it up to my Quest internet modem and Airport Express has a steady green light. That means it is receiving a internet signal right? Then why won't the Airport utility find it as a base station? I cannot go anywhere from there, as far as setting up a wireless network for the airport. Am I missing a key step or what can I do? HELP!

torenh, Welcome to the discussion area!
Have you tried doing a hard or factory default reset?
Have you tried temporarily connecting the AirPort Express (AX) via Ethernet to your Mac to configure it?

Airport Express Network won't play music from Base Station and remote spkrs

Is there any way i can hook up speakers to the base statino and the remote speakers? I am getting a message that says the base station is not configured to play music as part of the group. it says I can play music from base station, but not simultaneously with the living room speakers which i have set up on a repeater airport express.
Thanks,
PW

Well, I can choose multiple speakers, "living room" and "computer," and they play out of both, but it will not play from multiple speakers if I include the base station, which is hooked up to speakers in my office. The base station will only play if I choose it exclusively, and I wondered if there was something i needed to do to configure the base station to enable it to play as well.
PW

Airport extreme base station and express WDS?

Greetings,
Before I continue to struggle with this, I'm wondering if someone can confirm the viability of the following scenario:
N wired to AE wds'd to ABS wired to switch wired to other PCs
N = existing ethernet network
AE = Airport Express config'd thru WDS as a 'base station', though not distributing IPs etc (that is handled through N)
ABS = Airport Base Station config'd thru WDS as a 'Remote base station'
The problem is, when I connect an Airport client computer to the network (by choosing the AE) I cannot see the PCs at the end of the chain. I'm testing this connectivity through pinging.
Am I missing something? Is it possible that an AE cannot be a base station?
Many thanks in advance for any suggestions/tips!
PowerMac, Powerbook Mac OS X (10.4.7)

Thanks, Don. Yes, that link was a big help. A couple of key points for anyone else trying to do something similar:
- You can use WDS to bridge two different ethernet networks, providing that only there is only one gateway and one machine/router doling out IPs via DHCP
- Use the same network name for all APs in the WDS network
- Assign the APs IP addresses manually
- The ethernet port on an AP Express can only be used to extend a network when WDS is employed

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

How do I change the 5 ghz channel on new Airport Express when extended from Time Capsule?

Hi there. My Airplay device connected to the new Aiport Express keeps cutting out.
The 5ghz connection on my Time Capsule is set to channel 48. I have a new Airport Express (with Airplay device) extending from the Time Capsule and when I use WiFi Scanner, it shows the Airport Express set to channel 157. What gives? Is there a way to change to channel 48 or does this not matter? I imagine since they're on different channels, they're not talking to each other or am I .
Thanks in advance for any help.

I've managed to change the 5gHz of ther Airport Express that's extending the network.
As mentioned, main AE is on channel 48, and I now have the 2nd AE on channel 36 - which means my TV can now see the network. Also tested speed via my mavbook air on the same 5gHz network as it all seems OK (A while ago I spotted my Time Capsule was on the same channel 48 as main AE and throughput was abysmal! Bad enough to make me reset the TC to factory defaults and setup again - which is when the TC got channel 120).
Anyway, the fix... I changed the 2nd AE to create a wireless network (instead of extend), and manually set the channel to 36. I then set it back to extend, and it seems to have kept channel 36.

Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

Yes, if the AirPort Express is set up to create a wireless network that uses the exact same wireless network name as the other router and the same wireless network password as the other router.

Using an Extended Airport Express

Suppose I have a newer Airport Express which has been successfully extended from an Airport Extreme via Wi-Fi.
Which features of the Airport Express ( Wi-Fi, USB, Ethernet, Audio Out) can be used simultaneously-- Or is it one feature at a time?
For example, can I both extend my Wi-Fi range with the AE and connect an Ethernet cable from the AE to another device?

Hi,
I would like to ask a question.
So I could use the following setup?
Cable modem (wired to) Airport Extreme <--wireless--> Airport Express (wired/ethernet to) Slingbox.
The Slingbox will be able to connect to the internet via an Airport Express communicating wirelessly with the Airport Extreme that is connected to the internet.
Basically, to use the Airport Express as a wireless adaptor to provide internet for the Slingbox. Is that possible?
Thanks.

Error on Airport Express when using to extend Airport Extreme Base Station

Similar Messages

Maybe you are looking for