Error on booting Up Sun Solaris V880
I'm having Sun Solaris V880 with Solaris 8 OS and it's giving me this error:
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e0101a0e11,0:a
File and args.
Staring VXVM restore deamon
VXVM starting in boot mode
/usr/sbin/prtconf:getexecname ( ) failed
VXVM: vxconfigd:WARNNING: detaching plex rootvol-01 from volume rootvol
VXVM: vxconfigd: ERROR : System boot disk does not have a valid rootvol plex
Please boot from one of the following disk
DISK MEDIA DEVICE BOOT COMMAND
Rootdg00 SENA0_1 boot vx-rootdg00
VXVM: vxconfigd: ERROR: System startup Faild
Syncing file system
done
and it's come to Ok promt
I've seen this when you have mirrored boot disks, but the root volume is only attached on one side, and you boot from the other side.
Can you boot from the other disk?
If not, you'll probably have to follow recovery procedures for booting with the root filesystem removed from VxVM.
Darren
Similar Messages
-
PCC-S-02014 error while compiling with in Sun Solaris
We are porting our application from HP-UX to Sun Solaris and as part of that I am trying the compile a Pro*C program in Sun Solaris using SUNWspro C++ compiler. Precompiling is failing with following error.
PRECOMP set: /u01/app/oracle/product/10.2.0/bin/proc dbms=native code=cpp mode=ansi include=/u01/app/oracle/product/10.2.0/precomp
ireclen=255 oreclen=255
define=__sparc define=__SUNPRO_C include=/usr/include include=. include=/u01/app/SUNWspro/prod/include/CC/stlport4 include=/u01/app/oracle/product/10.2.0/rdbms/public/ include=/u01/app/oracle/product/10.2.0/network/public/ include=/u01/app/oracle/product/10.2.0/rdbms/demo/ errors=yes select_error=no
sqlcheck=limited ltype=NONE
release_cursor=no hold_cursor=no
Pro*C/C++: Release 10.2.0.3.0 - Production on Thu Dec 18 03:09:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /u01/app/oracle/product/10.2.0/precomp/admin/pcscfg.cfg
Syntax error at line 44, column 30, file /u01/app/SUNWspro/prod/include/CC/stlport4/algorithm:
Error at line 44, column 30 in file /u01/app/SUNWspro/prod/include/CC/stlport4/a
lgorithm
# include STLPNATIVE_HEADER(algorithm)
.............................1
PCC-S-02014, Encountered the symbol "(" when expecting one of the following:
: [ ] + / . .. an identifier, a numeric constant, newline,
define, elif, else, endif, error, if, ifdef, ifndef, include,
line, pragma, undef, exec, sql, begin, end, var, type,
oracle, an immediate preprocessor command, a C token, create,
function, package, procedure, trigger, or, replace,
Normal C++ files are getting compiled with out eny issues. This particular file is having functions written in C fashion. Any idea what is missing in the compiler option.
regards
VinuHi Vinu,
I'm not sure if this is still an issue for you. When I have encountered issues like this with Pro*C I have ended up specifying parse=none to the proc command and then putting all declarations between "EXEC SQL BEGIN DECLARE SECTION" and "EXEC SQL END DECLARE SECTION" markers. I have also moved any "special" declarations into a specific header file and then placed the "#include <special header file>" inside the declare section as well.
Perhaps that will help a bit,
Regards,
Mark -
Hi Friends,
I had installed Oracle 9.2.0.1(software alone) on Sun solaris box and then i installed the patchset 9.2.0.8 on the same Oracle 9i Home.It's installed.
But when i try to run dbca to cretae a database from $ORACLE_HOME/bin it throws the error:
java.lang.NoClassDefFoundError
i had set the PATH,ORACLE_SID,ORACLE_HOME,LD_LIBRARY_PATH but still getting the error.
Please suggest a fix.
Regrads,
ArunDo you have JAVA_HOME set in your environment?
What's the result of
env
Make sure DBCA is calling the java under $ORACLE_HOME not from other installation. -
Error 404 after applying p9492821 to OBIEE 10.1.3.4.1 on SUN Solaris
Hi Experts
I have applied teh above patch to OBIEE 10.1.3.4.1 on sun solaris as per the steps provided in the patch doc.
But after applying patch when i try to connect to presentation layer i am getting error
HTTP 404 Not Found
http://192.17.61.85:9704/analytics/saw.dll?Dashboard
if i browse http://192.17.61.85:9704/ i am able to get the welcome page.
oc4j is runnign
bi server and presentation services are also running
any help???
regards
GourisankarAre you able to reach presentation services and login if you go to http://192.17.61.85:9704/saw.dll ?
If so this may be a JEE application container issue or some type of rewriting of the URL going on.
Do you have a list of all the items that the patch modified? -
J2EE JOC-044 error while viewing TFF files on Sun Solaris
Hi, I have uploaded numerous .TFF files onto Oracle IPM running on 64 bit Sun Solaris Sparc. During the configuration I have mentioned the GDFontPath however whenever I try and view images in Oracle IPM, I m faced with this error A cache exception occurred. J2EE JOC-044 An exception is occurring in the method. CacheAccess.get Error counting pages while loading cache entry J2EE JOC-043 base exception: null
To download and view locally, use the Download menu item from the File menu of the Viewer.
Does not anyone have idea of this problem and resolutionHi Seetharam,
I am getting the same issue when trying to install a different BI application in Solaris sparc 64bit environment. Were you able to resolve the issue?? If so, could you please explain what the problem was and how you resolved it.
Thanks -
WebLogic 6.0 Installation error in Sun Solaris 2.6
I tried to install the evaluation copy of WebLogic App Server in a Sun Solaris
2.6 box and when I run the installer, it stopped because a symbol in a xomEuro.so.2
file was not found.
The installer stopped and showed an error similar to:
../usr/openwin/lib/locale/iso8859-1/xomEuro.so.2: _XlcCompileResourceList: referenced
symbol not found
I will very glad to know what was the problem and of course, how to solve it.
Thank you very much
Michel Fornaris
Senior Web Developer
Baptist Health Systems of South FloridaEvance Mok wrote:
Added "DebugConfigInfo OFF" to the "IfModule" tag in httpd.conf and still no
luck. Stopped the segmentation faults, but we are unable to forward the jsp
request to weblogic. Is the "DebugConfigInfo" parameter in the right
location? Are there any other suggestions?
Also, from the documentation, the "AddModule" command for weblogic is not
added in some cases, why is this the case?This just means that the apxs script does not add it so you will need to add it
manually...
>
>
Thanks,
Evance
"Vittal Gunturu" <[email protected]> wrote:
Hi we are proxying all the jsp requests from apche to wl6 on a solaris 2.7.
Always getting a segmentation fault ..
[Thu Jan 25 10:45:57 2001] [notice] child pid 9107 exit signal Segmentation
Faul
t (11)
Here's the section of the httpd.conf file
LoadModule weblogic_module libexec/mod_wl.so
AddModule mod_weblogic.c
<IfModule mod_weblogic.c>
WebLogicHost 192.168.1.33
WebLogicPort 7001
MatchExpression *.jsp
ErrorPage http://www.yahoo.com
Debug ALL
</IfModule>
Any suggestions
thanks
vittal
This is a known problem. It will be fixed in sp1.
For now, you need to add "DebugConfigInfo OFF" to httpd.conf.
Jong -
Error with library build for Sun Solaris 10
I'm getting an error when trying to build the BDB library on Sun Solaris 10, bdb 4.5.20. I download the .tar.gz file, untar it to /usr/local/BerkeleyDB.4.5 directory. Then I cd to /build_unix directory and enter in command: ../dist/configure --enable-cxx (im using a c++ application for bdb). Then after this build process, I enter make and I get an error of:
Libtool: link: 'usr/sfw/lib/gcc/sparc-sun-solaris2.10/3.4.3/../../..//libstdc++.la' is not a valid libtool archive
Make: *** [libdb_cxx-4.5.la] Error 1
Why does the link have 2 slashes in it (//libstdc++.la) ? Is this throwing off the build process? How do I fix this?
Anything I'm doing wrong?Thanks that solved the problem. I did this for the 32 bit version and also the 64 bit version. This link has the code for both versions of libstdc++.la (32 bit: usr/sfw/lib/libstdc++.la and also 64 bit: /usr/sfw/lib/64/libstdc++.la):
http://whocares.de/2006/05/26/solaris-10-fixup-for-libstdcla-is-not-a-valid-libtool-archive/
thanks again!!! -
RunInstaller error when install 9.2.0.1 on Sun Solaris 9
I am installing 9.2.0.1 oracle database server on Sun Solaris. I have java installed, however, the installer compains that no java jre. Please help!
Thanks !
nut% cd /tmp
/tmp
nut% /mnt/runInstaller
nut% The Java RunTime Environment was not found at bin/java. Hence, the Oracle
Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and
try again.
nut% which java
/usr/bin/java
nut% uname -a
SunOS nut 5.9 Generic_118558-38 sun4u sparc SUNW,Sun-Blade-1000
nut% echo $PATH
/usr/bin/java:/usr/bin:/local/ORACLE:/local/ORACLE/bin:/local/ORACLE/ptc/osia/or
aprod/bin:/usr/bin:/opt/SUNWspro/bin:/usr/dt/bin:/usr/openwin/bin:/usr/bin/X11:/
opt/local/bin:/usr/ccs/bin:/opt/gnu/bin:/opt/SUNWsmtv/bin:/usr/lib/nis:/usr/sbin
:/usr/ucb:/usr/local/bin:/local/ORACLE/bin/solaris-sparc:/usr/local/oag/bin_patc
h/solaris-sparc:/usr/local/oag/apps/bin/solaris-sparc:/local/ORACLE/bin/solaris:
/usr/local/epics/extensions/bin/solaris-sparc:/local/ORACLE/ptc/dataserver/intra
link/bin:/local/ORACLE/ptc/dataserver/intralink/diag:/local/ORACLE/ptc/dataserve
r/intralink/tools/bin:.I cann't view or cat that file. It hung there from the machine that i am performing the install.
However, I can view the file in the mathine that the cd driver located.
another piece of information. I have to mount the cdrom from machine bean to nut which is the one that i am goint to install the databae to.
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.jar
JRE_LOCATION=../stage/Components/oracle.swd.jre/1.3.1.0.0a/1/DataFiles/Expanded
OUI_LOCATION=../stage/Components/oracle.swd.oui/2.2.0.12.0/1/DataFiles/Expanded
This is the content of oraparam.ini on machine bean since I can't view it on machine nut.
HLP_LOCATION=
EWT_LOCATION=
DEFAULT_HOME_LOCATION=
NLS_ENABLED=TRUE
NO_BROWSE=/net
JRE_MEMORY_OPTIONS=-mx60m
[IMAGES]
FILE1=images/o9i_1.gif
FILE2=images/o9i_2.gif
FILE3=images/o9i_3.gif
FILE4=images/o9i_4.gif
FILE5=images/o9i_5.gif
FILE6=images/o9i_6.gif
FILE7=images/o9i_7.gif
FILE8=images/o9i_8.gif
BOOTSTRAP=TRUE
Thanks! -
Installation problem sun solaris 9 x86 on intel
I am trying to install sun solaris 9 x86 intel platform edition on my home pc hp e-vectra, configuration is PIII 800 Mhz, 10 GB HDD, 128 MB Ram, 17" color monitor, but it giving me following error :-
BooT Panic: trap type e, error 0 at 117499
Cr0: 800000011, cr1: 4, cr3: 17e000
Eax: 0, ebx: 7e2c, ecx: 0 edx: 16e350
Es: fffffffe, edi: 17dfe0, ebp: 7e40, esp: 7e20
Entering boot debugger:
Please help me, how can I install sun solaris 9 x86 on my HP E-Vectra PC.
Kalpesh MehtaI had similar problems several months ago. I suspect this happens when host pc does not have floppy drive(or bios somehow misreports it) as it was in my case. Solaris 8 seems to work fine in the same environment, so I keep using it for now. Possible workaround might be to use DCA from Solaris 8: Installation of Sol9 started just fine after I entered Sol8 DCA and asked it to boot from Sol9 CD.
Hope this problem will be fixed in subsequent Sol9 releases.
Victor -
Hi all,
i get an error when I start a Sun v240 server. i took this server over from someone else, but can not seem to install the OS.
I get the following error when booting :
"Boot device: disk File and args:
WARNING: unknown command 'B' on line 87 of etc/system
SunOS Release 5.10 Version Generic_118822_29 64-bit
WARNING: exec (/sbin/init) failed with error 13.
(Could not start init) Program Terminated
{0} ok
after this, the system hangs and i can not do anything.
If I insert the OS DVD, the system boot up with the same error.
Any ideas on how to reslove this?Hello,
Can you open the system in single user mode? Insert Solaris CD/DVD and type
following from OK prompt:
ok boot cdrom -s
if you succeeded control /etc/system and other configuration files related to boot.
regards,
zulusa -
Help needed on installation of Oracle 9i on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed on installation of Oracle 9i EE on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Portal Installation Problem on Sun Solaris
Hi,
I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
What else should I do to check the mistakes because I have installed it twise but no luck.
Thanks.
SandeepI am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
OracleiSuitesHTTPServer
OracleOraHome81TNSListener
I also tried to start the HTTP server from the command line but got the following error:
D:\Oracle\iSuites\Apache\Apache>apache
Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
AuroraService - directive already in effect for this Server
If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
Thanks,
-Stephanie
null -
Oracle 10g R2 installation on sun solaris 10 Sparc machine
Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran KanniahIt is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz -
Unable to connect Informatica on Sun Solaris to a SQL Server datasource
Background*
We have a fully operational OBIEE with OBIA Apps infrastructure running with Informatica PC8.6 ETL suite. Informatica services are running on a Sun Solaris 64 bit platform.
We currently extract data from two Oracle EBS 11.5.10 sources. Now we are trying to extract data from a new MS SQL Server 2000 source into the OBAW.
Problem*
I'm trying the use the native ODBC 5.2 Data Direct driver to connect the the data source.
I've gone through and completed the 9 steps of the 'Connecting to an ODBC Data Source' chapter in Informatica on our Solaris Unix box.
I've made the following changes to the *.profile*
# ODBC HOME
ODBC_HOME=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2
export ODBC_HOME
ODBC_INI=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2/odbc.ini
export ODBC_INI
PATH=${PATH}:$ODBC_HOME/bin
export PATH
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:$ODBCHOME/lib
export LD_LIBRARY_PATH
I've also made changes to the odbc.ini file as suggested:
[MSS_DB]
Driver=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2/lib/DWmsss22.so
Description=DataDirect 5.2 SQL Server Wire Protocol
Address=MssServer.xxx.co.uk,1433
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=MIS_Report_DB
LoadBalancing=0
LogonID=myuser
Password=mypwd
QuotedId=No
ReportCodePageConversionErrors=0
InstallDir=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2
I've created the Connection--> Relational --> ODBC connection on Workflow Manager
I've specified the username/pwd and connect string MssServer.xxx.co.uk@MIS_Report_DB. I've called it exactly the same as MSS_DB specified in the odbc.ini
When I run the workflow. It fails but doesn't throw up any error/error code in the session log. The last 3 lines of the Session Log below and then it just bombs out within 5 secs.
PETL_24006 : Starting data movement.
TM_6660 : Total Buffer Pool size is 4234808 bytes and Block size is 468312 bytes.
DBG_21438 : Reader: Source is [MssServer.xxx.co.uk], user [myuser]
If you ping from the Unix server it says 'MssServer.xxx.co.uk is alive'
Can anyone suggest what we need to do different or spot something obvious?
Edited by: bebedi123 on 13-Apr-2010 09:43user00726 wrote:
i am able to create files in /tmp
$ pwd
/tmp
$ touch test
$ ls -l
total 64
drwxr-xr-x 2 root other 194 May 27 14:20 OraInstall2009-05-27_02-20
-02PM
drwxr-xr-x 2 root other 194 May 27 14:35 OraInstall2009-05-27_02-35
-06PM
drwxr-xr-x 6 root other 445 May 27 14:38 OraInstall2009-05-27_02-38
-48PM
-rw-rw-r-- 1 root sys 6644 May 27 14:00 ps_data
-rw-r--r-- 1 oracle dba 0 May 27 16:04 test
$and i have also removed /tmp_dir_n8ai9b files
but still there is a problemYou have root as owner of subdirectories (e.g. OraInstall2009-05-27_02-38-48PM) and not oracle:
- do you install as root now?
- or make the directories writable for oracle, too.The write flag is missing (something like chmod -R a+w OraInstall2009-05-27_02-38-48PM)
Edited by: TanteKaethe on May 28, 2009 9:54 AM
Maybe you are looking for
-
870a gx54 problem with FX4100 CPU
Just built a pc for my son and it won't boot up - did the usual bits swapping out items for known working items and it boots fine with an AMD x4 process but is just dead with the FX4100 -don't have another am3+ system so can't check whether the CPU i
-
Error in Extend IDOC in WE30 Transaction
Hi Gurus. When I am creating an extension in WE30 transaction, the message is displayed: "Action is Not Possible for generated idoctypes" Debugging the transaction, identify the DataBase table EDBAS, What has the field "GENERATED" marked with "X" for
-
Is there a transaction to compile all programs after upgrade?
Hi all, Does anyone know of a transaction to compile all programs after an upgrade? One thing our users hate is that little clock in the lower left corner that says 'Compiling...' and after an upgrade this happens for every single program and transac
-
Mixed environment with Cisco 3750 and SRW248G4
Dear Community, as mentioned above in the subject field, we are evaluating Linksys for Business products. We are using Cisco products (i.e. Cisco WS-C3750G-12S-S) for core networking, due to new investment planning, we are evaluation how to upgrade o
-
Copy Tiger Classic Support into Leopard Possible?
I tried asking this in Leopard's pre-release forum and the responses were, shall we say "less than helpful." Before you answer (noting that this is the "Classic Environment" discussion group), I am well aware OS 9 is dead (duh), I have an expensive C