Error on Business Complete

Hi Gurus,
Can you help me with my Business Completion error, a warning log says
"Purchase Order item 902245 00010 of order 1000001 still without final billing indic."
I've done settlement already and it did settle.
This was the first time i encountered this error. Is there a setting in IMG on this?
Thanks

Hi,
When u doing bussiness completion,
You must complete sub sequent transactions related to that order,Like
Confirmation, technical completeions, settlement, PR,PO,MIGO,MIRO, Service entry sheet etc.
Kapil

Similar Messages

Error message when business completion of a production maintenance order

Hello,
When we try to do the business completion of an order, we get the following error message. We did all the steps that is mention in the error message long text, but still, we can't close this PM order... any suggestions how to resolve this issue ?
Unprocessed future change recs for order 13101294 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 13101294. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations

1) CORUPROC: done
2) IW46:
I have about 50 of thoses messages:
Reprocessing incorrect confirmation:
BAPI2010021219323230 Confirmations ordres de travail/service BATCHADM     12.02.2010
BAPI2010021619324630 Confirmations ordres de travail/service BATCHADM     16.02.2010
BAPI2010022519341330 Confirmations ordres de travail/service BATCHADM     25.02.2010
BAPI2010022619332130 Confirmations ordres de travail/service BATCHADM     26.02.2010
BAPI2010030119322730 Confirmations ordres de travail/service BATCHADM     01.03.2010
BAPI2010030419330430 Confirmations ordres de travail/service BATCHADM     04.03.2010
3) COFC
I have many logs about availability control: ex: Item 001 Ordre 13101294 budget exceeded
4) COGI
No errors

Error - Could not complete the music store request, the store may be busy .

I get the error "Could not complete the music store request, the store may be busy, check your internet connection or try again later." I have uninstalled and reinstalled,Tried on and off with the firewall, tossed the prefs, tried older and latest versions. It used to work but it hasn't worked in the last few days.
Windows XP Pro

I found the problem to the iTunes Music Store connectivity. When iTunes version 6 is installed, it places a configuration / preferences file in the following location:
"C:\Documents and Settings\<user>\Application Data\Apple Computer\iTunes\iTunes.pref"
This file contains several very large keys:
Preferences:129= (41,826 characters in length)
Music Store= (1,722 Characters in length)
Somewhere in these keys is stored are references to userid's, connections or other TCP/IP / internet connectivity objects that are being used when iTunes is installed. By deleting this file, these old setting appear to be cleared out.
In my case, one or more of the keys in this file appear to have been storing a property from my old dial-up ISP connection that was no longer valid for my new, Comcast cable modem connection.
Once I deleted this file, and re-started iTunes, it was as if I had never run the software before. I bypassed the option for searching for and importing .mp4's from My Music, and Itunes opened correctly, with full access to the music store. My library and playlists were intact and all is well.
Apple should re-write the protion of iTunes codes that stores anything pertaning to an internet connection that may change over time. Alternatively, iTunes should either A) Prompt for this information B) Enable user access to this parameter in a settings dialog C) Access this information dynamically at runtime.
Paul

Can not see the ICON of Complete Order (Business Completion) in the IW32.

Hi All,
          I want to Complete the Maintenance Order (Business Completion) but I can not see Icon - Complete Order. to complete the Maintenance Order. I understand Order --- Function -
Completion path can be used for competeion but it is disabled.
          For Superuser's LOGIN they have the ICON for complete Orders and they can see any error message for completiing Orders. Since I cant perform complete Order I can not see any error message.
         Is there any user settings for ICON's display.
Regards,
Narendra

It is assigned in role
To display - run PFCG and select the role click display and select authorisation tab click details icon and click organisation level to view the Buisness transaction
To maintain - Run PFCG and select role : SAP_Workorder_Closer ,Click the pencil and click on the authorisation tab and change authorisation value and eithier you can manually maintain I_BETRVORG with BABS value. or Choose Plant maintenance business transaction from the structure and add BABS and generate the profile. then execute the transaction.
Co-ordinate with Basis or Security team
Thanks
S.N

XML-24521: (Error) Element not completed

I am trying to map a collection of information to a partnerlink's input variable, using a for-each xsl node in the transformation, however I receive this error during my testing:
Target XML is invalid for the target schema.
<Line 14, Column 38>: XML-24521: (Error) Element not completed: 'ExecuteGloviaSP4ProcessRequest'
At first I thought this was an issue related to the database adapter, now I'm thinking it has to do with the collection or the xsd? But we modled the xsd after the OrderBooking PO xsd...
Here's my Transformation_1.xml
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="http://Comp3/RFPOTest.wsdl"/>
<rootElement name="invoiceCollection" namespace="http://199.244.49.95/NotesRFPOInvoice.xsd"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="http://bpel.thomasnow.com:80/orabpel/default/ExecuteGloviaSP4/ExecuteGloviaSP4?wsdl"/>
<rootElement name="ExecuteGloviaSP4ProcessRequest" namespace="http://xmlns.oracle.com/ExecuteGloviaSP4"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://Comp3/RFPOTest.wsdl" xmlns:xsd1="http://199.244.49.95/NotesRFPOInvoice.xsd" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:ns1="http://xmlns.oracle.com/ExecuteGloviaSP4" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc" exclude-result-prefixes="xsl ns0 soap tns xsd1 plnk ns1 wsa bpws ldap xp20 ora orcl">
<xsl:template match="/">
<xsl:for-each select="/xsd1:invoiceCollection">
<ns1:ExecuteGloviaSP4ProcessRequest>
<ns1:invCCN>
<xsl:value-of select="xsd1:invoice/xsd1:invCCN"/>
</ns1:invCCN>
<ns1:invVendorNbr>
<xsl:value-of select="xsd1:invoice/xsd1:invVendorNbr"/>
</ns1:invVendorNbr>
<ns1:invVendorApLoc>
<xsl:value-of select="xsd1:invoice/xsd1:invVendorApLoc"/>
</ns1:invVendorApLoc>
<ns1:invVendorInvoiceNbr>
<xsl:value-of select="xsd1:invoice/xsd1:invVendorInvoiceNbr"/>
</ns1:invVendorInvoiceNbr>
<ns1:invTotal>
<xsl:value-of select="xsd1:invoice/xsd1:invTotal"/>
</ns1:invTotal>
<ns1:invFreight>
<xsl:value-of select="xsd1:invoice/xsd1:invFreight"/>
</ns1:invFreight>
<ns1:invTax>
<xsl:value-of select="xsd1:invoice/xsd1:invTax"/>
</ns1:invTax>
<ns1:invDate>
<xsl:value-of select="xsd1:invoice/xsd1:invDate"/>
</ns1:invDate>
<ns1:invVendorTerms>
<xsl:value-of select="xsd1:invoice/xsd1:invVendorTerms"/>
</ns1:invVendorTerms>
<ns1:invUNID>
<xsl:value-of select="xsd1:invoice/xsd1:invUNID"/>
</ns1:invUNID>
<ns1:invGLDist>
<xsl:value-of select="xsd1:invoice/xsd1:invGLDist"/>
</ns1:invGLDist>
</ns1:ExecuteGloviaSP4ProcessRequest>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>

Update:
By mapping static values to the last three elements in the target schema, I was able to make this error go away.
Here's the code:
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="http://Comp3/RFPOTest.wsdl"/>
<rootElement name="invoiceCollection" namespace="http://199.244.49.95/NotesRFPOInvoice.xsd"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="http://bpel.thomasnow.com:80/orabpel/default/ExecuteGloviaSP4/ExecuteGloviaSP4?wsdl"/>
<rootElement name="ExecuteGloviaSP4ProcessRequest" namespace="http://xmlns.oracle.com/ExecuteGloviaSP4"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://Comp3/RFPOTest.wsdl" xmlns:xsd1="http://199.244.49.95/NotesRFPOInvoice.xsd" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:ns1="http://xmlns.oracle.com/ExecuteGloviaSP4" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc" exclude-result-prefixes="xsl ns0 soap tns xsd1 plnk ns1 wsa bpws ldap xp20 ora orcl">
<xsl:template match="/">
<xsl:for-each select="/xsd1:invoiceCollection/xsd1:invoice">
<ns1:ExecuteGloviaSP4ProcessRequest>
<ns1:invCCN>
<xsl:value-of select="xsd1:invCCN"/>
</ns1:invCCN>
<ns1:invVendorNbr>
<xsl:value-of select="xsd1:invVendorNbr"/>
</ns1:invVendorNbr>
<ns1:invVendorApLoc>
<xsl:value-of select="xsd1:invVendorApLoc"/>
</ns1:invVendorApLoc>
<ns1:invVendorInvoiceNbr>
<xsl:value-of select="xsd1:invVendorInvoiceNbr"/>
</ns1:invVendorInvoiceNbr>
<ns1:invTotal>
<xsl:value-of select="xsd1:invTotal"/>
</ns1:invTotal>
<ns1:invFreight>
<xsl:value-of select="xsd1:invFreight"/>
</ns1:invFreight>
<ns1:invTax>
<xsl:value-of select="xsd1:invTax"/>
</ns1:invTax>
<ns1:invDate>
<xsl:value-of select="xsd1:invDate"/>
</ns1:invDate>
<ns1:invVendorTerms>
<xsl:value-of select="xsd1:invVendorTerms"/>
</ns1:invVendorTerms>
<ns1:invUNID>
<xsl:value-of select="xsd1:invUNID"/>
</ns1:invUNID>
<ns1:invGLDist>
<xsl:value-of select="xsd1:invGLDist"/>
</ns1:invGLDist>
<ns1:invICN>
<xsl:value-of select="concat(0,"")"/>
</ns1:invICN>
<ns1:invCurrency>
<xsl:value-of select="concat("USD","")"/>
</ns1:invCurrency>
<ns1:invGLDistCode>
<xsl:value-of select="concat(" ","")"/>
</ns1:invGLDistCode>
</ns1:ExecuteGloviaSP4ProcessRequest>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
However I have a new error now, since I'm also mapping the Collection to the for-each XSL node.
Target XML is invalid for the target schema.
<Line 18, Column 1>: XML-20100: (Fatal Error) Expected 'EOF'.
Searching...

CATM transaction_System error: quantity not completely distributed

Hello,
When i execute the transcation CATM(entering of time), system was displaying the error in SM12/SM13 as "System error: quantity not completely distributed".
but when i checked the accounts and the cost were transferred. so shall i repeat the transcation CATM again any?
Question: while doing CATM transcation, why the error is displaying??
Please be noted that i referred note 100690.
Service PO is cretaed for 1 PC and service enetry sheet is created.
The goods issue quantity (EKET-WAMNG) at schedule line level deviates from the quantity of goods received actually posted (according to the PO history).
EKBE-quantity - 1PC
EKET-WAMNG- 0 PC
Process: MM and HR module was linked in the business process.
In a Purcahse order , personnel number(HR module) need to maintain for our vendor. then service PO is cretaed and service enetry sheet is careted.
Regards,
Pabbati Obulesu

Hi Pabbati Obulesu
Have you already run the relevant correction report from note 100690? Was there any change to the table entries?
Also check the consistency between the GR postings and the status of the SES.

User Exit Maintenance Order Business Completion

Hello Gurus,
User Exit IWO10004 triggers when TECO the Maintenance order.
What is the User Exit which can triggers when Business Completion?
My requirement is I want to restrict the Business Completion only for TECO orders,
Currently I even REL order also can be CLSD by business completion which is bypassing TECO status.
how can I restrict this?
Please advice
Thanks
Ashok

Ashok,
Adding some inputs of Pete, the following code seems to be working fine. This throws this error
in the taskbar, when you Business Complete and try to save a Non-Teco Order.
DATA: V_PHAS TYPE PM_PHASE,
       V_STAT TYPE J_STEXT.
SELECT SINGLE IPHAS FROM AFIH INTO V_PHAS
WHERE AUFNR = CAUFVD_IMP-AUFNR.
CALL FUNCTION 'STATUS_TEXT_EDIT'
   EXPORTING
     FLG_USER_STAT = 'X'
     OBJNR         = CAUFVD_IMP-OBJNR
     ONLY_ACTIVE   = 'X'
     SPRAS         = SY-LANGU
   IMPORTING
     LINE          = V_STAT.
IF V_PHAS <> '3'.
   IF V_STAT+0(4) = 'CLSD'.
     MESSAGE: 'Status ''TECO'' is essential for Business Completion' TYPE 'E'.
   ENDIF.
ENDIF.
CLEAR: V_PHAS, V_STAT.
Please test and confirm.
KJogeswaraRao

Business completing a PM Order

I am trying to business complete a PM order say X.
The error message says"Order 1 is assigned to the order X". I can understand that order 1 is assigned to order X but when search for the order 1 I could not find it. There is no order with # 1.
How to solve this?
A general question -Is there any way where I can see what all the orders are assigned to a order say X means which orders have their settlement receiver as order X.
Thanks

There is no problem of external service.........Whenever any PM Order say X you assign settlement rule and in that rule you specify Receiver as as another PM Order say Y, In this case if you are doing Business closure of order Y without closing oredr X system will give error "Order X is assigned to account of order Y" and for this there is no linkage or checking of external serviece .....................By doing "Do not execute" of order X system will allow for business closure of order Y.

Activation Error: Could not complete the iTunes... (help!)

Activation Error: "Could not complete the iTunes Store request. The store may be busy. Check your Internet connection or try again later"
Ok that is the error I get every time I set my new iPhone in the dock.
Details:
I bought the 8GB iPhone at the Kenwood Mall in Cincinnati OH, brought it home installed version 7.3 of iTunes, plugged in the dock and the iPhone, I went through the activation process and after agreeing to all the terms and licenses, the iPhone said "activated," but iTunes was still trying to connect to AT&T for something and eventually timed out. I remove the iPhone and it seems to sync and all features seem to work fine including making and receiving calls. BUT... everytime I place the iPhone in the dock, I get the above error. I click OK and every works fine. This happens everytime I place the iPhone in dock. How do I get rid of it??? Is there still something else that needs to be done on my account. BTW, my Internet is working fine, as I am typing this message via my Internet connection in IE on apple's site.
Thanks
Dell XPS Gen-2 Windows XP Pro 1GB Mem, SP2

I bought the 8GB model, only had a 45 minute wait in line at ATT store. Performed activation via iTunes over 10 hours ago with porting of old T-mobile number. Still receiving message that activation is not completed. Called ATT and after 3 transfers, 35 minute hold times and then a recorded message that "due to extremely high call volumes" we will not be able to answer your call" it then proceeds to disconnect you. Finally kept trying and talked with ATT rep. in portability and they confirmed my porting has been approved but that my account still shows iPhone not registered. They then provided 877-800-3701 for problems with iPhone activation. After speaking with this representative, he would not work with me until I provided Web Order #. I told him that I purchased the phone in person at store, so he said that I would need to contact the store to obtain this number and without this number they could not verify that I had the phone and therefore it couldn't be activated. I called the store and left message. A store rep. called me back and told me that I would need to contact that same 877 number as they could not support me. ***!! To make matters worse, my old phone is now been ported and deactivated so I am phone-less and have a iPhone sitting in the dock that is completely useless. I am very disgusted at this point and don't know what to do. I was not expecting such an awful customer experience with an Apple product. Anyone have any thoughts? I drove by the AT&T store and there is a huge line of buyers, so I am not sure what to do at this point.

Business completion

i am facing problems in business completion of the orders after settlement some of the order are getting business completion but some of the giving error i am not able to understand why because order good movement is posted man hour is confirmed order is TECHO as well and settle as well but giving me the error which is (unprocessed future changes recs for the order number prevent del.flag/completion) anyone can tell why this happening when everything is compete

Hi ,
In IW46 plz check if any incorrect confirmations exits .. if yes plz confirm those again ..and then do settlement ,Business Completion.. plz check this
regrds
pushpa

Business completion not done due to balance in overhead cost

hi
I create a maintenance order or refurbishment order. I am able to do "Technical Completion". when i go for business completion, i am not able to do...
error message is..
Balance in order is not zero...
it is because i have some over head cost, whcih comes during planning the cost, its not coming as actual cost...
How to settle over head cost ?
- Pithan

Hi Pete
In the order, the settlement rule is created with full settlement. I am not sure from where it takes the cost for overhead.
Sri
I am not asking how it wil settle... i need to settle the overhead cost.. thats my question.
i have done IW41, MIGO. For Ko88, System will pick the settlement rule... since this is a refurbhisment order....
Thank you for replies....
Still i am not able to business complete...
- Pithan

Unable to do Business Completion

Hi Experts,
When I Tried to do Business completion for a order after its settlement it throws the following error -
"unprocessed future change recs for order XXXXXXX prevents completion"
Is there any thing related to HR module (like data transfer etc.,)
Pl give your suggestions
Thanks
Sashi

Hi
Check if there is some cost which is yet to be settled in KOB1 against that Order.
Also check if there are any Open commitments i.e an Order against which GR is pending.Check the Final invoice indicator in that case and then Try
Thanks
Manish

IW32 Business Complete

Hello,
I am trying to change a warning message to an error message when user's try to business complete a work order that still has an outstanding IR. I have located the FM that creates and sets the type of message (K_OBJECT_REORG_CHECK) but I can't find a BADI or user exit to alter the message type. Any help would be greatly appreciated.
Thanks,
Nicole

Hello,
you can use one of the following exit:
Enhancement IWO10006, EXIT_SAPLCOIH_006 PM Order: Customer Enhancement for Exclusion of Function Codes (if you have an outstanding IR you exclude the function code, so enduser can't "complete" the order)
Rgds,
JP

When I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

Type layer error: Could not complete your request because of a program error.

I am trying to rebuild text in a photo. I clicked the type tool, clicked on the background layer (knowing a new one should form) and got this error:
Could not complete your request because of a program error.
Then I made a new blank layer, clicked on it and got the same error.
I quit, relaunched started typing the new layer without a hitch. But when I selected to change the font (to any font), I got the same error
I switched to Firefox to search for the problem and went back to PSCS5. Now I can change the font! After switching applications and clicking on the type layer, I get the error again! Then it's fixed. Then it comes back.
Anyone have this problem or a solution?
I'm using Mac OS 10.5.8 with PSCS5 12.0.1

Most likely you have a corrupt font which is causing problems for some of the type/font code.
Try validating your fonts with FontBook as a first step.

Error on Business Complete

Similar Messages

Maybe you are looking for