Error on Component Monitoring On RWB after changing SLD .

Hi,
Guys If my below given questions are not clear to You ... >>>>>>>>>>>>Do ask me for Clearity
My PI 7.0 System was on Local SLD earlier, at that time My Scenarios/ RWB Components were Working Fine.
Now, On Place of Local SLD, We are onto Centerlise SLD on SOLUTION Manager.
after few Changes now my ESR and ID are getting product and Buisness System from Solution manager's SLD.
but ................. >>>>>>>>>>>
>
>>
>>>>
>>>>
On RWB - Component Monitoring - Each Component is coming into Red/Error mark.
So ..
Question : Is RWB is also effected from SLD Changes ???????
r
Facts Found during troubleshooting : -
>
1. In Solution Manager's SLD - Technical System - Exchange Infrastructure - Only one Technical System is Coming for Integration Server.
while
IN Old Local SLD - Technical System - Exchange Infrastructure - 6 different tecnical system was coming ( Integration Server/ RWB / Integration Engine / Adapter Engine ...etc)
Can this be the reason ????????
Please Suggest, What is Missing ?
for Sld Change following steps are performed .. .. . .
1. PI 7.0 like User Creation in Solution manager.
2. Changes in SLDAPICUST in PI System.
3. Changes Done in Excange Profile for SLDNAME.
4. Changes Done in Virtual Manager for SLDNAME.
5. RZ70 on new SLD.
Regards

Hi ,
Solution : After changing Local SLD to Domestic SLD , Error was Coming in RWB - Components ...
Solved by :
These are Documents Used for doing Changes in SLD When found Error on RWB.
764176 - Error in XI due to inconsistent SLD contents.
1031321 - Self-Registration of Adapter Engine and RWB fails
Problem has been solved.

Similar Messages

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

Trex Index error in Component Monitor

Hi Experts,
I have created an index for indexing one of the KM folder . When I check the queue status from TREX monitor screen, it shows Document Status as "Preparation
Failed"
Return Message : 8005
Return Message : Timeout reached
Return Message : 8006
Return Message : Lost Connection to peer
I have also checked Component Monitor in that Repository Managers and Services shows runing status but there is errror symbol with yellow trangle.
Can someone please help me out

Yes Sir,
There are errors in component monitor and i have expanaded the node ands checked the errors that are as follows,
Component Monitor --> Services --> scheduler --> attachmentscheduler startup failed :
Configuration Error: No CM system assigned to this task
Component Monitor --> Services > reporting> Startup Error: exception in startup: Invalid RID: No repository manager found for prefix: /reporting
Component Monitor --> Repository Managers > reporting> startup failed
Component Monitor --> Repository Managers >taxonomy> Startup Error: taxonomy manager: start failed
We had assigned one server node to Scheduler Tasks.
Still there is same error.

Regarding Communication Channel Error in Component Monitoring(RWB) in Dev

Hi,
In my XI dev Server when I check Component monitoring....Adapter Engine and CC monitoring are showing errors ( showing red
symbol)......
I think my RFC to File Scenario cannot be executed due to this.......I cant receive any messages in SXMB_MONI.....
Please help me......
Thanks,
Sudheer

Hi...
Still I am not getting any messages in the MONI.....
In communication Channel Monitoring it is showing green.......
In Component Monitoring Integration Engine:XID showing red.....CCMS Status: showing red and Adapter Engine Showing red......
Created RFC destination at ECC(of 'T' type) and gave ECC details....Then gave same details in Communication channel in XI.......
I did not created RFC Destination at XI.......
Should data to be passed to RFC or XI automatically pings the data......
When ABAPer executed RFC Connection its successful...but when he executes Functional module i.e test it is showing 'SYSTEM_FAILURE'.....
Thanks,
Sudheer

File System repository error in component monitor

Hi,
I created a file system repository in our portal server which will connect to windows file system and display the folder structure.
I created a File system repository manager with the following properties mentioned below
Prefix (must start with /): /FMICDelaers
Lookup mode: caseless
Root Directory:
fendercorp\FMICDelaers
Repository Services:
Property Search Manager:
Security Manager: W2kSecurityManager
ACL Manager Cache:ca_rsrc_acl
Windows Landscape System: B2B_Windows
I have given full acees to everyone for FMICDealers folder on fendercorp server.
We have created a networkpath called B2B_windows as mentioned below
jCIFS Protocol: yes
Description:
Network Path:
fendercorp\FMICDelaers
Password:xxxxx
User: insidefender\ssayneni
When i am checking the repository in component monitor i am getting the below error
Startup Error: The localroot does not exist: /usr/sap/EPD/JC61/j2ee/cluster/server0/
fendercorp\FMICDealers
Thanks
Sushanth

Hi
A general recommendation would be to use small letters in all ID's regardring network drives, repositories etc. See https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/002fb447-d670-2910-67a5-bfbbf0bb287d for advice on how to optimize performance of KM.
Other than that, you could check the documentation mentioned here:
https://www.sdn.sap.com/irj/sdn/message?messageID=6398301#6398301
It seems as the root directory in your File System Repository Manager is not defined correctly. It should be forward slash instead of backslash.
Go through the settings again and see if the startup error changes or disappears. The startup error indecated that it is a configuration error.
Best regards,
Martin Søgaard

Error in component monitoring

hi experts,
i'm working on file2jdbc secnario,in component monitoring it occured an error like.............
"Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure) Even in the datatype i mentioned action as attribute.i need some solution to overcome this.
helpful answer will be rewarded.
regards,
Kiran.

Kiran,
Go through this links,
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar

Business Process Engine error in component monitoring

Hello,
i installed a new version of XI.
when i check the component monitor whit browser i see that Business Process Engine element have RED led.
If i look the details, then i have the follow element whit yellow status:
Maintain Prefix Numbers
Configure RFC Destination
Schedule Background Job for Missed Deadline
Schedule Background Job for Work Items with Errors
Schedule Background Job for Event Queue
Schedule background job for clearing repor
something during configuration?
thanks for suggestions

Hi,
first thing you should try is:
1. Start transaction SWU3.
2. Use the button u201CAutomatic workflow customizingu201D
it's explained [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10bcbd65-64ea-2a10-9a8d-b653b8e0843c] .
Regards
Patrick

Error in Performance monitoring in RWB

Hello,
I'm getting error while opening Performance Monitoring in RWB.
Error is " 2 Message(s) : Connection to Integration Server lost - Error class com.sap.aii.proxy.framework.core.BaseProxyException: Application exception raised in the R/3 system: GET_OWN_IS_NAME_FAILED . Could not create application fault message: null - "
I'm not able to get the source for it's check, can anyone please advice me wat is the problem and wat can be the solution for the same?
Expecting on ASAP basis....plz.
Thanks
Anand.

Is SLD connection working? You can check it with transaction SLDCHECK on the ABAP side.
Regards,
Sergio

CCMS on Component Monitoring in RWB

Hi all
CCMS button on Componenet Monitoring in RWB, i clicked on this CCMS button. then i got the following error
how can i solve?
Service cannot be reached
What has happened?
URL http://sapxi.hh.net:8000/sap/public/bc/its/mimes/system/SL/page/hourglass.html call was terminated because the corresponding service is not available.
Note
The termination occurred in system XID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:YDXI_XID_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
thanks in advance
venjamin

Hi Venjamin -
I could not expand the XI <SID> node via RWB either, although I could do it in RZ20.
I get the same message as you do when clicking into the <SID> node. I don't believe this to be an error as no properties such as assigning a auto-reaction method can be maintained for that node.
When you maintain your sub-MTEs (such as 'IEngine_<SID>_<Client> Integration Server' or 'QRFC Queues') under your <SID> node, you'll be able to drill into or select the relevant properties for those elements.
Best regards,
Jin

Monitor went black after changing resolution

I changed my mac mini resolution to something higher. The screen went black and now it never shows anything on it anymore. I turned off the mac and the monitor but still the same problem when I turn the mac back on. How can I get to see the screen again?

Hello Bill,
Welcome again to the Apple Forums.
Most likely you have picked a screen resolution and/or screen signal frequency that is not compatible to drive your monitor.
You have a couple options available to you.
Option 1.
Restart your mini computer and turn off the monitor.
Let the mini computer start up completely.
The mini will detect no monitor is detected and default to a lower resolution and frequency setting.
Turn on your monitor after the mini has completed its start up.
Option 2.
Restart you mini computer and leave the monitor turned on.
Hold down the shift key on the keyboard after you hear the start up tone.
The mini will start up in Safe Boot mode and switch to a lower resolution and frequency setting.
Cheers
Jan J.

Power Map has encountered an error and it needs to close, after changing the graphic settings

I've been using the updated Power Map tool successfully over the past few days.
Last night I was playing around with the graphics settings that can be found under the File Tab (I know that should teach me from playing around and following the user guide :-) ) and I changed the detail from Medium to High (I think) and now all that happens
when I click on create a new tour or select an existing tour is
"Power Map has encountered an error and it needs to close. Power Map can collection information about the error and create an e-mail which you will be able to send to Microsoft and help us fix the problem. Do you want to do this?"
The error that gets generated can be seen below.
Thank you for submitting this error information to Microsoft. We appreciate your help!
System.Exception: Could not create the render target shared resource.
   at Microsoft.Data.Visualization.Engine.Graphics.Internal.D3DImage11.SetBackBuffer11(IntPtr pResource)
   at Microsoft.Data.Visualization.Engine.Graphics.D3DImage11.SetBackBuffer(RenderTarget renderTarget)
   at Microsoft.Data.Visualization.VisualizationControls.GlobeViewModel.CompositionTarget_Rendering(Object sender, EventArgs e)
   at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
   at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
I've removed Power Map from the system, restarted, repaired Office, restarted and reinstalled Power Map but the problem remains. So i'm guessing that the setting I changed are stored in the Registry or File System somewhere.
Any help would be gratefully received.
Regards
Rob Ireland

Is this still an issue?
This also might be worthy to send to the team as a bug.
You can send it in email using the Smile/Frown feature in the UI.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error got in Communication channel monitoring ( component monitoring)

Hi Experts,
When i executed the RFC from R3, i got the below error in runtime work bench.
please help me out if any one knows, i already gone through some of sdn line, but i am not able to get exact solution.
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcServerPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=qa2.syec.sshe.ed SYSNR=13 GWHOST=qa2.syec.sshe.ed GWSERV=sapgw13 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Thu Mar 20 15:44:08 2008
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic_mt.c
LINE 10713
COUNTER 1
1) Registered Server Program has been created in RFC destination in R3, and RFC destination has been tested successfully, in R3 System we have 9 clients, but i have created one client independent RFC detonation type TCP/IP. is it right way to create client independent single RFC destination for multiple clients?? ( 3 unit test clients, 3 development clients, 3 configure clients), but in SLD only 3 business are created ( which are for 3 unit test clients), i have imported business system for client 300 and i have created communication channel under this business system, but when i run the RFC in this client i am gettin above error in component monitoring.
2) I have created incremented 100 to 300: Set the following environment variable CPIC_MAX_CONV=300
3) In sender RFC communication channel i have all correct parameters like: gateway service,Program ID, client number, password, userid etc
Pleas help me out.
thanks
siva grandhi

Hi,
This solved this issue for me:
Setting Maximum Database Connections
Perform this step only if you want to check or change the values.
       1.      Open the Visual Administrator tool.
○       j2ee admingo.bat if you also use SAP WAS ABAP.
       2.      Log on as an administrator.
       3.      Choose Server ® Services ® JDBC Connector.
       4.      Choose the Properties tab strip and select sysDS.maximumConnections.
Regards,
Hugo Mendoza

No Adapter Engine in Component Monitoring

Hi, perhaps u have read my previous post concerning problems while refreshing cache.
Well i found out that my adapter engine is not listed in component monitor in RWB.
I have no clue why this now all happens because i did no changes! I am not able to refresh IB Directory stuff, therefore nothing is processed via XI.
..and the adapter engine is not listed.
What might be the problems. I already studied the XI-Cache-HowTo!
br

Hi Agasthuri,
the SWC are imported "well". It all seems to be fine after restarting the server.
But still i am not able to refresh the cache - it's explizit the ABAP-Cache!
SXI_CACHE offers error while attempting to refresh the cache!
The Cache connectivity test in RWB says that an error occured while attempting to connect to Integration Directory!
any ideas...?

Every thing is two times in component monitoring

hi,
I am trying to acces the component monitoring in RWB and there evry thing is coming two times.Please help
Solved it thanks
In RZ21 there were two system groups maintained for the same system
Edited by: Fariha Ali on Feb 10, 2010 2:20 PM

Because you did not change what str1 refers to...
You told str1 to point to what str2 was pointing to at the time.
str2 was a reference to "efgh". So, in effect, you told str1 to point to "efgh", too.
Then you told str2 to refer to something else. str1 has nothing to do with what you told str2 to refer to.
You told str1 to refer to whatever str2 was referring to at at that specific point in time. After that, str2 is on its own. They are separate references and are not implicitly connected to each other.

Use of test message button in Component Monitoring

Hi All,
We can't send message from adapter Engine where as we can do through Integration Engine from component monitoring of RWB.
Then What is the use of send message button in Adapter Engine from component monitoring? Please comment on this.
Is there any why to send message though Adapter engine from RWB? if so please provide the related blog.
Thanks

Hi Chinna,
>>You can always get the target payload using test button in message mapping.Right?
What i was trying to say is , say you have a incoming message. You want to send it directly to adapter engine. In this case the mapping would have already happened as you mentioned before. What i asked you to do is test the mapping in Integration Repository with the incoming payload.
You can then use the target message to send directly to adapter engine.
>>GIve the username as PISUPER or PIAFUSER. It will work for sure
I have tried this so many times. Kindly confirm with basis team if the password which you are entering for PISUPER or PIAFUSER is the right one. Try to login using SAPGUI with username as PISUPER and the password as PIAFUSER.
If the password works then try again in RWB .
If it still doesnt work do post a message again.
>> It is possible to send the message to Adapter engine which originate the message processing at IE?
Not sure what you mean by this. Just want to say it is possible to send message directly to adapter engine for test purposes.
Regards,
Sumit
<i></i>

Error on Component Monitoring On RWB after changing SLD .

Similar Messages

Maybe you are looking for